Using VBA, I am trying (without success) to copy the active worksheet of my workbook and save it in the current folder using a filename shown in cell A1. I only need to save values and formats. Any existing code (auto fit) contained withing the sheet would no longer be required. I get a VB project message relating to macros. I would anticipate saving as xlsx would deal with this but again, am at a loss.
View 4 RepliesI've recorded this code and am looking to include it in a button. I would like for when a user clicks the button assinged macro that the active sheet is cloned and saved as a CSV file. The user should be prompted before saving on where (file location) they'd like to save the file.
Sub CloneWorksheet()
'
' CloneWorksheet Macro
'
'
Sheets("SDW&Customer Workshop scheduled").Select
Sheets("SDW&Customer Workshop scheduled").Copy
ActiveWorkbook.SaveAs Filename:= _
"C:Documents and Settings1167916My DocumentsTestBook1.csv", FileFormat:= _
xlCSV, CreateBackup:=False
End Sub
I have a workbook which have worksheets say A to J. I wanted it to be separated into 10 different workbooks A.xlsx, B.xlsx, C.xlsx and so on in drive C. Could anyone help me here?
View 6 Replies View RelatedThe current macro I have allows me to save 'sheet 2' as the name in cell sheet1 B2, which is a 6 digit number. I now want it to save as data from 2 cells, sheet1 B2 followed by sheet1 B1, which is job name (eg. 112233 microsoft excel).
This is the current formula I have:
Public Sub saveworkbook()
Dim filename1 As String
Sheets("Sheet2").Select
ActiveWindow.SelectedSheets.PrintOut Copies:=2, Collate:=True, _
IgnorePrintAreas:=False
Sheet1.Select
filename1 = Range("b2")
ActiveWorkbook.SaveAs filename:= _
"C:UsersAndrew.SDocumentsInterloc DocumentsHardware Sheets" & filename1
End Sub
am using Excel 2010 and having issues trying to save a worksheet to a specified file location with the save date....
I have tried several posts form this forum and elsewhere and can't seem to get the macro to do what I want.....
I want to save a 'worksheet' from an open workbook that I use for updating information to the same file path as the workbook with the date the file saved...
Copy the active sheet that is open in a work book and save it to another file with the date in the name? For example Report_11-03-08.xls
The only problem I see with this. How could I also make it append a letter to report if the file already exits Example saved as
Report1_11-03-08.xls. Then just continue incrementing.
Sub CopySave()
Application.ScreenUpdating = False
ActiveSheet.Copy
Application.DisplayAlerts = False
ActiveSheet.SaveAs Filename:=ThisWorkbook.Path & "/" & "Report_" & Format(Date, "mm_dd_yy") & ".xls"
ActiveWorkbook.Close
Application.DisplayAlerts = True
Application.ScreenUpdating = True
End Sub
How can I save only the active sheet of a workbook in VBA?
View 9 Replies View RelatedI am trying to create a form button that will save as and close the active workbook. I have the Save As code working but I can't find any code to close the workbook that will work. A couple of issues: I don't have control of what the workbook is called - the user will name it - so I can't do a simple Workbooks (" ").Close. Also, I don't want to quit the application. I don't know if the user will have other worksheets open. I also tried ActiveWorkbook.Close and that didn't seem to work either. Not sure what I am doing wrong.
View 9 Replies View RelatedI have a fluid document that I have to save for historical reasons in 2 separate directories. My save Macro works I was just wondering if anyone see's a better way of accomplishing saving to two separate directories then closing the document. I used the record function to gernerate most of the code.
Sub SAVEANDEXITTHESLATE()
Dim date1
Dim date2
Dim xlCalc As XlCalculation
xlCalc = Application.Calculation
Application.Calculation = xlCalculationManual
On Error Goto CalcBack
Application.ScreenUpdating = False
date1 = Now()
date2 = Format(date1, "mmm d yyyy hh mm")
ActiveWorkbook.SAVE
Application.DisplayAlerts = False
ChDir "c:Documents and SettingsmeDesktop"
ActiveWorkbook.SaveAs Filename:= _...................
I have a form which creates a budget based on user input. I want to save that user input in a separate workbook. My goal is to reduce the file size. I have several modules which perform evaluations/ calculations, and then format the output in a worksheet, but the size is pretty large 450KB.
I was thinking that I could set the control source, to different cells on the worksheet, and then just copy the worksheet to a new workbook, and save the data by itself. Then if I wanted to change the data for a given budget, I would copy the sheet back into the workbook that contains the modules, and load the form again. Is this a good solution? Is there a better way? Please let me know if I can provide more information.
I got a workbook with a database in sheet1. I filter that database and copy - paste values the results to a new sheet. Next, I save that new sheet to somewhere on my drive. The thing is that I want to go back to my original database, and continue filtering. But that workbook is no longer the "active workbook". This is how it works:
sub DifferentClients()
For Each FieldWorkBy In Array("Client1, Client2,...")
MyDatabase.AutoFilter Field:=CountryCode, Criteria1:=Array( _
[Code]....
When saving a file that has 5 sheets that extend to the right of the users screen, sometimes the left part of the report is left somewhat hidden because the last person to save it was using the part to the far right. Is there a way to move all the active cell to A1 and make sure rows A:D or so are showing?
View 4 Replies View RelatedI need to reference the projected and actual expenses from the total on worksheet 'expenses' So i did so, however, if I change the drop down on the expenses worksheet to only display housing data, then the projected and actual expenses on my budget worksheet changes as well to the new data portrayed on the expenses worksheet.
I need to reference the cell, without it changing when I change the category display, but I need the cell to change accordingly if I enter new data in the overall tablet on the expenses worksheet.
Or do I need to create a seperate worksheet that has the data in and reference my cells on my budget worksheet to that new worksheet?
I have created an excel worksheet that will provide budgeting and estimating tools for my project managers. All data used to be manual entry and took a good while to complete. I am trying to automate the process with VBA.
I created a UserForm called InfoVerify1. On that form I have TextBox 1 - 10. When the UF opens, the boxes display project information from my worksheet called "Basis of Estimate", also known as Sheet26.
The TextBox1 ControlSource is set to "E4". When I run the macro with Sheet26 active, the proper information fills in. However, when I am on the Start page or any other worksheet and I run the macro, it tries to fill in the text boxes with E4, etc, from the active sheet. I tried changing the ControlSource to "Sheet26,E4" or any combo thereof with only error messages.
how to get it to refer to a cell on a particular worksheet and hold to that worksheet no matter which sheet I am on at the time I run the Userform?
I need to copy a range of cells from various columns/rows from 1 sheet into 6 other sheets, but into a specfic range of cells(in the same workbook). I am looking for a code which would copy the cells, then allow me to save the sheets it has copied them to as seperate workbooks without loosing the values it copied. I would also like to make amendments to the cells which have been copied onto the other sheets, without having an error message if I type anything into the cells, also having any blank cells left blank rather than placing the 'o' value in the cell.
View 2 Replies View RelatedI have an excel workbook, and in that workbook, i have one worksheet with multiple tables. Any sample code wherein i can save in a seperate excel file the range that i selected?? because the tables in the worksheet are in different ranges and i would like to save just a part of that table in a separate excel file..
View 3 Replies View RelatedI am looking for the VBA code to copy worksheets (with formatting) and save to a specific folder. The steps I am need to follow are:
Create a copy of the first worksheet
Save it to a specified folder and name it with the worksheet name
Repeat with all worksheets until the end of the workbook
I would like to link a macro to a button on the active sheet, that saves the active sheet In a New Workbook, with Format And Values Only. Preferably saved in the same location as the origonal workbook. This is my main goal.
If possible I would like the new workbook to be named from a chosen cell (E19) on the active sheet with date added.
After using VBA code to save multiple workbooks into single workbook the file hangs (states not responding) - I uninstalled 32 bit version and installed 64 bit, no difference.
Each worksheet has look up tables, formulas and graphing.
I need to create time sheets for about 30 contract workers.
Each time sheet needs to have their name as well the date for sunday of that week inserted into the form. (once the date for sunday is entered into the sheet, the rest of the dates for the week will be extrapolated out).
Then, once the data is inserted for a single worker, I need that file to be saved using the workers name in the file name.
The script would then open a new time sheet template, insert the second workers name and the date for sunday and save the file. Repeate for next 30 workers.
Read “My Documents” Path And Use Result
Problem:
Note:
Typical user OS will be Windows XP Pro / Win 2K
Excel version : 97 / 2002 / 2003
1. Corporate network security settings will only allow directory/subdirectory creation in the “My Documents” section of customers individual computers.
2. Per customer request, VBA application needs to save extracted files for future use.
3. I can specify an initial “My Documents” subdirectory be made and the VBA application file be loaded/copied into that location – i.e. – “My DocumentsCat”.
4. When VBA application is opened from that specified directory, (first time), the application needs to make an additional subdirectory tree to save future files. I can read the opened from location via VBA with the following:
Dim filepath As String
filepath = ThisWorkbook.Path
As an example – this code would produce a string definition of “filepath” – such as the following:............................
I am using Excel 2007
I have a spreadsheet with 1,000 rows in multiple columns
In column "B" i have 8 unique names.
What I am trying to work out is to copy and paste all the rows for each unique name and save in a separate workbook named as the unique name.
How do I write a vba code to print active sheet to pdf, auto save in specific folder then mail using outlook
im using 'Nitro PDF Creator'
also id like it to automatically save the pdf as the same file name as the active worksheet and also auto enter the following when opening the email server:-
Address: Cell D18
Subject: Cell D21
Email body:
find attached quotation
Optional installation available on request
I have a spreadsheet with 10 or more items that I would like to separate into their own worksheet. I'm thinking about a macro but I'm not sure about creating new worksheets in a macro.
I used the "record macro" and went through my data manipulation steps. But its not transferable to other worksheets because it imbedding the name of the worksheet in the some functions (sort, pivottable,...). How can I change the name of the worksheet to "activeworksheet"?
View 2 Replies View RelatedI am trying to get the lookup function to return the corresponding value in a separate worksheet where it occurs more than once in the lookup range.
At the moment it is only finding the first match. i.e. in
=VLOOKUP(A2,'Appointment Tracker'!A2:B9999,2,0)
i am working on a project where i need to get data from a pivot table that resides on a separate worksheet named "Pivot_by_Group".
I have a worksheet "Budget vs. Actual" and I need to pull data from the pivot table to populate the Actual values.
How can i do that and one more thing, hopw can i suppres errors (#NAME, #REF, etc), i've used the ISERROR function with no luck.
I have a spreadsheet which is a list of dates and amounts.
I want to have a filter on a second worksheet wherein I can type the date and it will filter all amounts for that date.
I've tried the Advanced Filter but I can't get it to auto filter when I change the date. Also it needs setting up every time I do an advanced filter.
I have this macro created with macro recorder that makes a copy of my worksheet.
View 2 Replies View RelatedI am attempting to use the following line:
View 4 Replies View Related