Set AutoFilter Value Wont Work
Feb 2, 2009Set AutoFilter Value Wont Work
View 3 Replies
ADVERTISEMENT
Excel Autofilter Does Not Work With Renamed Cells
Apr 4, 2013I have renamed some cells to custom names eg. renamed cell A1 to FLIGHT and B1 to FLIGHT2.
When I apply a filter to the columns and autofilter, the renamed cell now refers to a different cell! ie. FLIGHT no longer has the same text value in it
This also only happens when I autofilter by alphabetically or highest/lowest values
Get Autofilter To Work Based On Cell Contents?
Jun 26, 2014I am trying to get autofilter to work based on cell contents.
Code:
ActiveSheet.Range("$C$1:$C$18371").AutoFilter Field:=1, Criteria1:=">=1.5" _
, Operator:=xlAnd, Criteria2:="
Conditional Formatting For Row Banding Doesn't Work After Autofilter
Sep 8, 2009For obvious reasons, the conditional formatting to shade alternate rows doesn't work when filtered. So I think I need another way of doing it. Luckily, my table is fairly static, rows aren't added or removed. The first column is excluded from the banding. As is the first and last row with data (1 & 67) respectively. I found a relevant thread here, but the code is beyond my understanding.
View 3 Replies View RelatedWorking With Autofilter Macro, Work With The Visible Selections
Jun 23, 2009how to make this recorded macro work with more than the sheet it was recorded on. I need to work with the visible selections. But I'm having all kinds of problems trying to pick just the visible cells. Not having any luck with this project. I tried to included a test book but It keeps giving me an error.
View 4 Replies View RelatedAutoFilter Method Of Range Class Failed - Yet Autofilter Works.
Sep 25, 2009Im sure this is a very common problem. I tried searching for it but I havent found anything that solves this for me. Here is the code Im using:
View 3 Replies View RelatedWork Out A Formula For My Spreadsheet Which I Use To Work Out Cutting Lists For Timber Frames
Jan 11, 2009i need to work out a formula for my spreadsheet which I use to work out cutting lists for timber frames. I need it to work out if the width of a job is for eg 2400mm i need to work out how many timber studs I need so the space between each stud is between 400mm and 500mm and this will need to work for a range of different sizes of frames. I have it written at the moment and it just devides the width by 400 and gives me a amount of studs but it would work much better if it could space them between 400 & 500.
View 4 Replies View RelatedWork Accurately With Times To Calculate The Work Progress Of The People In The Workshop
Mar 3, 2009In a project i am compiling i need to work accurately with times to calculate the work progress of the people in the workshop thus....here goes....
I have in work book #1 (7) sheets mon to fri + complete week + a sheet where all job numbers are collected.
From monday to friday the workmen log their times as a start time and a end time. This has to be then calculated to a total hours:mins spent per job, wich in turn then has to be calculated to a total hours:mins spent per day. And the on the complete week sheet recalculated as a total time worked per week.
Copy Top Cell Post Autofilter And Reapply Autofilter Based On Cell Value
Aug 20, 2014I can select the top cell in column "F" after filtering by multiple columns using VBA and arrays, but now want to I want to use the top cell in column "F" to search for all other equipment that uses this item.
E.g. remove filter, and reapply autofilter to column "F" based on selected cell as per below VBA
Note: Row 1 contains command buttons and row 2 Headers.
How To Get A Macro To Work With Any Work Book Name
Aug 24, 2009i have a made a macro that copies info to a new sheet now that is working great but if i change the name of the work book it wont work any more so i need the macro to work with what ever name i give the workbook
the current name is
AVERAGE PRICE (update 2009) Mimmos Armico 170809.xls
i have attached the code in notepad ...
Make To Display (0), Instead Of (-0,02) When I Just Do Other Work Than Cad Work
Feb 13, 2010In column J, Cad Hrs. How to make to display (0), instead of (-0,02) when I just do other work than Cad Work? I need to separate type of work according to price hour, overtime, and so on.
View 2 Replies View RelatedSet Autofilter To All Without Removing The Autofilter
Jan 16, 2007I can set the autofilter, change it, remove all using Macros. What I need to know how to do is reset a filtered column to ALL while leaving all other filters on.
View 2 Replies View RelatedCopying A Certain Range In A Work Sheet To Another Existing Work Sheet Using VBA
Dec 29, 2009I have a range of cells in a work sheet "sheet 1 " my objective is to filter this range according to certain criteria (i ve succeeded to do this ) yet what i want to do now is copy this data to another existing worksheet in a certain range .
note :the existing worksheet to which i 'll copy the filtered data has some cells out of the range that i dont want to over write ..
Simply :how to copy a selected range of cells in a work sheet to already existing work sheet in a specific range aswell .
Copy A Formula Across Several Work Sheet And Have The Formula Always Take Data From Previous Work Sheet
Jan 2, 2009I am want to copy a formula across several work sheet and have the formula always take data from previous work sheet.
2) I am working with this formula =C12+INDIRECT((MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,256)-1)&"!"&"C12")
and it comes from this thread http://www.excelforum.com/excel-gene...orksheets.html. I have included a worksheet attachment that has explanations
AutoFilter
Jul 25, 2009auto filter options in excel. For some reason it is only sorting up to row 140.
View 14 Replies View RelatedAutofilter On More Than 2 Criteria
May 15, 2008Say you have a long list of data, and you go to Data menu --> Filter --> AutoFilter
And then you want to use the Custom AutoFilter. Here's a screenshot:
[url]
Is there any way to do MORE than two autofilters?
Autofilter With More Than Two Conditions
Aug 3, 2009I have a list of item numbers in a column which is Autofiltered. I can go to the autofilter drop down and then to custom and select two item numbers to allow through the filter, however I have about ten item numbers that I want to allow through the filter.
View 10 Replies View RelatedMore Than One Autofilter On One Worksheet
Sep 17, 2009Is it possible to have multiple instances of autofilter on a single worksheet? The two autofilters should not be related to each other and are on different sets of data (in different rows as well as columns but in the same worksheet).
View 2 Replies View RelatedAutoFilter Is ON But Not FILTERED
Apr 16, 2014I have a situation - where I have a table and a "eSubtotal" cell that basically shows the subtotal value when Autofilter is ON and a SUMIFS calculated value when Autofilter is OFF. I have written this in the Selection change event of the sheet.
For this purpose, I have perform a regular check of AutoFilterMode = true or false and based on this result, I change the formula in the cell, eSubtotal.
Now the challenge is, I don't want to apply SUBTOTAL formula when AutoFilter is ON but there is no filter in any of the columns. I want to keep the SUMIFS just like that in this case.
So far, no good luck..
AutoFilter 0's & Non-Blanks
Sep 20, 2008The following the code from the macro recorder. Is there a better way to execute this task in proper VBA code?
How do you add an [If...Then] critieria when 0 or 0.00 are not found, then continue to search for the next criteria, Non-Blanks?
I have 2 more questions within this .....
Array In Autofilter
Oct 1, 2008When I run the following code, it just returns records that matches "Commonwealth" and not a single record with "State". What am I doing wrong?
More Than Two Criterias In Autofilter
Nov 3, 2008i am trying to filter data based on more than one criteria (8 to be precise). I have some data in one worksheet and i need to transfer it to other worksheets depending on certain criteria. for example if cell A1 has A or B then it should go to "temp1" spreadhseet, if A1 has C,D, E, F, G or H then it should go to "temp2" worksheet etc.
Is there a smart way of doing this rather than writing a number of with statements using 2 criterias each and hence copying data in more than one attempt (and thus slowing down the macro)?
I did think of using creating a dummy column, then using If statements to write True or false in that column, using true & false to filter and copy the data and then finally deleting the column. but as i understand i can not have more than 7 nested if statements but i have 8 criterias.
Last Visible Row With Autofilter
Jun 2, 2009I have an autofiltered sheet, on which I need to find the last visible row (all columns have the same # of rows in use). I am trying to use:
View 4 Replies View RelatedResetting AutoFilter
Aug 13, 2009Code runs rather slow. Is there a better way to achieve the same results?
View 5 Replies View RelatedAutofilter To New Workbook
Oct 8, 2009I have a workbook of approx. 60,000 rows, with about 20 columns including a source identity column, such as 'Leeds' , 'Barnet' etc..
What i need is a solution that will auto filter all rows that have a value of 'Leeds' in the source column into a new workbook called 'leeds.xls' for eg. and so on (for each unique source value) and loop until the whole data set has been filtered.
Saves manually filtering, copying and pasting....over and over.....
Im guessing the VBA needs to build / look at an array etc...
Setting AutoFilter Via VBA
Jan 20, 2010This macro was working just fine, now it generates an error on the line in red.
View 2 Replies View RelatedUsing An Autofilter Instead Of LOOP
Feb 11, 2010I have an spead sheet with 9 sheets 1 master and 8 sub sheets. The master sheet runs for col A to AV and the it can have x amount of rows. At the moment i use the following but this takes an age.
View 9 Replies View RelatedAutoFilter & Find Using VBA's
Feb 20, 2010The attached file has two sheets, “order” sheet and “stock” sheet. Can some help me with the followings:
1-In either sheet, I would like a VBA where if I put the mouse on a cell and then click on a VBA button, the VBA performs an Auofilter of the cell I have selected.
2-In sheet “Orders”, I would like a VBA where if I put the mouse on a cell and then click the VBA button it takes me to sheet “stock” and performs a find function of the cell I choose in sheet “orders”. For examples, if I put the mouse on cell E21 in sheet “orders” and press the VBA button, it takes me to cell H297 in sheet “stock”.
3-In sheet “stock”, I would like a VBA where if I put the mouse on a cell and then click on a VBA button, it takes me to sheet “orders” and performs an Auofilter of the cell I choose in sheet “stock”
Turn Autofilter On And Off?
Nov 23, 2011I have a code that will look in column C for all rows with data, turn on autofilter and copy the data into column A.
Then do the same in column D, paste into column A.
And finally the same in column E, paste into column A.
But I think the autofilter turning on and off might be a problem.
Code:
Sheets("PP").RAnge("A2:A50").ClearContents
Dim LastRow1 As Long
RAnge("C1").Select
[Code].....
Selected (Autofilter) Without Using VBA
Jan 1, 2012How to achieve by formula what was selected in autofilter without use vba.
View 4 Replies View Related