Set Default Values In Find Dialog Box
May 29, 2008When searching the 'Look in' contains 'Formulas' by default, how do I change that so that the default is now 'Values'?
View 3 RepliesWhen searching the 'Look in' contains 'Formulas' by default, how do I change that so that the default is now 'Values'?
View 3 RepliesI am working with Excel 2003 and find that the default "Protect Sheet" dialog box opens with a default of both the "Select locked cells" as well as the "Select unlocked cells" check boxes marked. Is there a way to change this default?
View 2 Replies View RelatedIn the routine:
Private Sub bttnPCsFind_Click()
Application.ScreenUpdating = False
Cells.Select
ActiveWindow.ScrollColumn = 10
Application.ScreenUpdating = True
Application.Dialogs(xlDialogFormulaFind).Show
Application.ScreenUpdating = False
ActiveCell.Select
ActiveCell.Select
ActiveWindow.ScrollColumn = 10
End Sub
Is there a way to set the range of cells for the DialogFormulaFind to search against that doesn't involve Cells.Select? Functionally the above routine works perfectly but, if given the option, I would prefer to not have the cells highlighted (and thus darkened) while performing the search. If I remove this line altogether then nothing in the search is ever found. It is a visual glitch I am looking to get around.
Does anybody know how Excel manages the selection of the cells when performing a find using Ctrl + F (when performing a find using the hot key or menu item the cell range isn't selected (highlighted) ahead of time and thus, remain white during the search/Find Next). Is this possible to code this behavior using VBA?
I'm looking to have a Button on my sheet that will open the Find box so people do not have to go to the menu to find it. Is there a code that can open this?
View 2 Replies View RelatedRelated to my thead here, is there a way that the Find dialog can be automatically closed after the find?
View 7 Replies View RelatedI have the following code in a macro to open up a find dialog box, but it does not seem to work. I am getting the following message when I try to find something:
Microsoft Office Excel cannot find any data to replace. Check if your search formatting and criteria are defined correctly. If you are sure that matching data exist in this workbook, it may be on a protected sheet. Excel cannot replace data on a protected sheet.
I checked the data I am trying to find and replace and it is correct.
I have Excel 2010, and a dual monitor setup, with the left monitor being the main one. I have my spreadsheets on the right monitor.
When I open a Find and Replace, the dialog box always goes to monitor #1 (left); I want it on monitor #2.
Is there a way to default it to the "right" monitor?
i'm using Sendkeys Edit Find to open the Find dialog box (works well)...i would like to restrict the searching to only 4 worksheets (of 14) of the workbook...?
(i see the option to select Sheet or Workbook)
I have a userform containing 3 textboxes, to calculate derivatives.
User enters two integers in textbox1 and textbox2; and to textbox 3, I need to transfer these values but with a little issue.
For example, user entered 3 to textbox1 and 5 to textbox2. In textbox 3, it needs to show 3x^5.
For example, user entered 7 to textbox1 and 2 to textbox2. In textbox 3, it needs to show 7x^2.
So "x" and "^" are our defaults in textbox3.I tried to transfer the numbers that the user enters to cells A1 and A2, -I don't know if this works- but I don't know how to call them to change the text in the textbox.
I would like to have a dialog box "popup" if the value of two cells do NOT equal.
cell C11 has net sales values for the day, including cash, checks, and credit cards. After sub total of these values, I subtract any charges(voids) and get a total(c11). I enter a sales(c12), tax(c13), no tax(C14), misc. amounts(C15 & C16) ,reductions(c21) and put the total in Cell C22 with the formula =Sum(c12:c16)-c21). Because I do not want the formula overwritten, I protect the sheet including the amounts in cell c11 and c22. If they do "Not" match I would like a dialog box to appear so the error can be corrected.
It always hassles me to have to change the default setting of FIND to search by Columns instead of Rows.
My question is simple: Is it possible to change the default setting so that every time I use FIND it will search by Columns by default???
In Excel I need a particular cell to always have a default value. Say Cell B1 always needs to be 22. If any values are given in Cell A1, then B1 should diaplay that value. And if anyone deletes the value in Cell B1 still by default it should show 22 as the value. Is it possible.
View 2 Replies View RelatedI was wondering whether there was any way to save the values put into a form, so that next time you open it the same values will appear - basically I want all the variables I type into my textboxes to be saved when a button on the form is pushed.
But I can't find the magic words - I'll include the code so far below, but the crucial bit is missing (if it is possible at all)...
Private Sub btSaveDefaults_Click()
Dim tb As TextBox
For Each tb In fmImportSetup.Controls
'*****HERES THE IMPORTANT BIT*******
tb.??????? = tb.value
Next
End Sub
I've looked through the forum, and have seen several requests for data validation defaults, but not related to cells that need to repopulate to defaults based on an action. I'm attaching my worksheet to get an understanding of what I'm trying to accomplish.
Default Data Validation Help.xlsx
Basically, any time a new employee name is selected, I want default review begin and end dates populated to the data validation cells so that the dates don't have to be manually selected every time a new employee is reviewed.
I am finishing up a macro that manipulates a pivot table and creates a file for us to run. But we all keep this pivot table up a lot, and usually keep a lot of the data filtererd in it.
Is there a way to set all of fields in a pivot table back to their default values like when you first open up the workbook?
I am having some difficulty adding a default value to a cell.
What I want to do is have a cell that will read "Enter value here" if nothing has been added, but display the users text when changed.
I've been playing with the IF statement feature for a while, but am getting nowhere.
If I want to format a cell I go to that menu. Choose formatting number.
The default value will appear with 2 decimal digit.
I want to change it to 3. How can I do so?
Is it possible to change the DEFAULT values that Excel 2007 offers?
I want to automatically set default values in a row dependant on the value chosen in a list. Some of the default values need to be lists where the user can chose to update to a non-default value.
I have tried using a double drop down list. However if the default list value is changed then the dependant list value is changed, the default list is not automatically updated.
I have a userform with 10 textboxes which will all contain a time in HH:MM format. Could I have the userform to fill the textboxes with a default value once a time has been entered into textbox1. I would like the default value to be the time from the previous textbox plus 30 mins.
eg. So if I enter 14:00 into textbox1 I would like textbox2 to display 14:30, textbox3 to display 15:00.
If this is possible, could I add a Listbox with the options 1 to 10. Then would I be able to only uses the textboxes based on the number selected in the listbox. So if I selected 2 then just Textbox1 and Textbox2 would have values in them. For 8 being selected then Textboxes 1 through to 8 would be filled.
how to link axis properties with a scroll bar (two scroll bars).
The idea is to be able to modify the maximum and minimum values for the axis in case there are outliers which might cause problems by analyzing the chart.
The Guideline in the scroll bar should be set to its maximum (all the way up) by Default, meaning that if there chart behaves itself well there is no need to change its axis values.
The same applies for the minimum guideline of the scrollbar but it should be sent all the way down by Default.
Paste can this be set to default to Paste Special Values only ?
I have a sheet with a number of lists validated drop down boxes. The sheet is networked and works fine.
Problem other users as they are entering information into the required cells they are copying and pasting. Then the inevitable occurs they paste data into the wrong cells the validation from the original cell is pasted as well. Is there a way I can set paste special values only to be the default for the full sheet.
Unfortunately we use excel 97 in the office.
I am trying to find some missing values compared to 6 base values. For instance, I have a sheet with some names translated to another language, I am trying to find the languages some names have not been translated too.
For example, if I have six languages, Arabic, Japanese, Russian, Chinese-Simplified, Chinese- Traditional, and Korean to compare too, I want to find any names that are not translated in certain languages.
Sample:
John Japanese
John Chinese - Simplified
John Korean
Martin Arabic
Martin Chinese - Simplified
Martin Russian
Ramon Arabic
Ramon Russian
Sam Arabic
Sam Chinese- Traditional
I have data similar as shown in the following:
A1A11
B2AA1122
C3B22
D4C33
D44
The idea is to add compare the cells of the first column with the third column. Where same letters/words exist, the corresponding value of the first column should be added to the second column (where no letter exists equally, the space remains empty), so it will look like this
A111
AA1122
B222
C333
D444
the third column always will have at least the same letters as the first column, but new letters/entries can occur.
compare some list of values in order to fiind the common values.
View 1 Replies View RelatedTrying to find the sum of all cells in the array described in the formula that are equal to the values inside the quotations. I used this exact (as far as I can tell) formula to find the sum of values that were NOT equal to my quoted values and it worked just fine. Any ideas why formula 'A' will not work but formula 'B' does work? I have a feeling I'm missing something simple here!
Formula A - Does not work:
=SUMPRODUCT(--('Master Lead Sheet'!$J$2:$J$10000=$B2),--('Master Lead Sheet'!$N$2:$N$10000="REJECTED"),--('Master Lead Sheet'!$N$2:$N$10000="CONDITIONED"),--('Master Lead Sheet'!$N$2:$N$10000="APPROVED"))
Formla B - Works:
=SUMPRODUCT(--('Master Lead Sheet'!$J$2:$J$10000=$B2),--('Master Lead Sheet'!$N$2:$N$10000"No Answer"),--('Master Lead Sheet'!$N$2:$N$10000"Disconnected"),--('Master Lead Sheet'!$N$2:$N$10000"Wrong Number"),--('Master Lead Sheet'!$N$2:$N$10000"EMAILED"),--('Master Lead Sheet'!$N$2:$N$10000"needs to be emailed"),--('Master Lead Sheet'!$N$2:$N$10000"Refund"),--('Master Lead Sheet'!$N$2:$N$10000"REFUNDED"))
I have data that looks like this:
day# id amount
1 56575 0
1 56675 0
1 56680 0
1 56683 0
1 56681 0
1 51810 0..............
How do you write an excel macro that looks at the number in the first column (day #) and finds all the duplicate id#s in the second column that are in day 1and adds the amounts together in the 3rd column then writes the first column number (day#), second column number(id#) and the third column (sum of the amounts of duplicate Id#) to an new worksheet. Then the macro would loop through day #2 and do the same thing. Notice that the values in the id column are unique in this data set below this is how I would like the data to look. I have accomplished this in a pivot table but my problem is I need a cvs file to export the final data into an external database which is why I need a macro.....
how to change the default output values "FALSE" and "TRUE" for the AND() function ? Let say I want to change them to "FAIL" "PASS".
View 2 Replies View RelatedI have x coordinates in column 1 with coresponding y coordinates in column 2. From my data of x,y coordinates I want to find points with similar y values. In my data I have defined groups of numbers, i.e. I have a set of numbers with y values around 30 (+-10), then a new group with y values around 60 (+-10), and so on... Sometimes the groups are not totaly separeted, there could be a few points with y values between 30 and 60. These points can be grouped with the closest group of coordinates (30 or 60). Each group of x,y coordinates could be copypasted in the columns to the right (columns 3 and up).
So what I want to do is find a group of coordinates. This group will have at least 40 individual points +-10 from a group mean. The coordinates need to be sorted out from the data and put in seperate columns.
I'm building my first Add-In, which I'm using to gather all Sub's that I've created through my small VBA writting career. The thing is that when I write new code and some reason exit Excel and forget to save the XLA, obviously the code is lost. I've used:
View 4 Replies View RelatedI have some code in a standard module. When I try to run it, it does not appear in the dialog box. The code's below.
Code:
Sub CopyCat(ByVal Target As Excel.Range)
If Target.Column 21 Then Exit Sub
If Target.Value = "Y" Then
Cells(Target.Row, "A").Copy Destination:=Sheets("Sheet2").Range("A" & Rows.Count).End(xlUp).Offset(1)
Cells(Target.Row, "B").Copy Destination:=Sheets("Sheet2").Range("B" & Rows.Count).End(xlUp).Offset(1)
Cells(Target.Row, "C").Copy Destination:=Sheets("Sheet2").Range("C" & Rows.Count).End(xlUp).Offset(1)
Cells(Target.Row, "D").Copy Destination:=Sheets("Sheet2").Range("D" & Rows.Count).End(xlUp).Offset(1)
Cells(Target.Row, "E").Copy Destination:=Sheets("Sheet2").Range("E" & Rows.Count).End(xlUp).Offset(1)
End If
End Sub