I have a macro that will create multiple worksheets (up to 19) within the same workbook. There could be any combination and/or count of the worksheets, but I would like to place them in the same order every time. For example 1,2,3,4,5 or 1,2,4,5 depending on the number outputted. However these tabs will not be in alpha or numeric order.
Is there a way to create a final line(s) of vba code to place these tabs in the preferred order?
I need a way to re-order an excel worksheets columns based on another worksheet.
Data is extracted from a database into excel however users can configure the columns in the initial system. to how they like This causes problems when the data is copied into an excel spreadsheet I have created as the data copied will not be in the same column order as is required.
How can i reorder the columns without physically having to cut and paste the columns to match?
I have attached a sample spreadsheet.
You will see on the spreadsheet that 'fixed columns' is the order that i require the data however 'variable columns' is not in the same order.
I need a code to sort worksheets in a huge workbook. Is this technically possible!?
The information containing the worksheet order is available in worksheet "Aux", column A contains the rank (1,2,3,...etc.), whereas column B contains the corresponding worksheet names.
Is there a way of selecting a custom tab order on a worksheet?
I want to create a tab order of C12 - H12 - M12 - R12 - W12 - C13 - H13 - M13 etc
it only seemed to create the tab order for a certain number of cells. Is there a way of doing it any number of cells?
I have code to copy sheets from one workbook to another, but how to maintain the order based on the Source Workbook.
Actually what i'm trying to do is copy all the Sheets named start with "_". FYI, i cannot use the Index of Sheets as well.
Code:
i = 0
For Each ws In Workbooks(xWBSource).Worksheets
If ws.Name Like "_*" Then
i = i + 1
sArrSheet(i) = ws.Name
[Code]...
How can i copy contents of cells in desired format from one workbook to another in the following format with VBA code :
Code:
A!H1 to B!K1
A!H2 to B!L1
A!H3 to B!K2
A!H4 to B!L2
......
.......
I have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.
How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?
I have a spreadsheet saved with one worksheet with all the results on it and 130 worksheets with calculations on them, each with its' own named tab along the bar at the bottom of the page. What I'd like to know is if it is possible to sort the tabs into alphabetical order so I don't have to roam through up to 130 to find the tab (and it's corresponding worksheet) I'm looking for.
View 2 Replies View RelatedI have 8 Sheets in my worksheet with orders from my customers. Column C is their PO# and Column M is the Status of the order. What im looking to do is set up a summary sheet with the List of 8 customers that tells me what PO#'s are in a particular status.
I need a formula to list all PO's that are in "Fabricating" or "Completed" Statuses.
I have gotten this far:
=if(Sheet1!M25="Fabricating",Sheet1!C25,if(Sheet1!M25="Completed",Sheet1!C25,"None"
which works perfectly for the individual rows, but i need it to do it for all rows (1-2500). If i do Sheet1!M2:M2500, i loose it.
I'm looking to use the Find function in order to search through a protected worksheet. Currently I can use it to search, however, I am unable to click on the results to bring me to each instant.
View 2 Replies View RelatedI'm trying to get a sheet filled in the order of the command buttons selected. It works like:
User clicks command button "A" in Sheet 1.
Macro runs that selects correct info in Sheet 2.
Info gets pasted in Sheet 3.
Repeat and Sheet 3 columns fill to the right with each command button clicked.
My issue is that I'm not sure what command to add in the macro to make it paste in the next available empty column. Right now all I can get it to do is paste over the info already there.
I have code that i use to copy a worksheet of information in one workbook to a worksheet in another workbook. All i need is some guidance on how to copy a second worksheet from workbook 1 to a second worksheet in workbook 2. Should be fairl straight forward.
In the below i am copying the sheet Phone_data to a second work book sheet also called Phone_Data, i would like to include in the same proccess a sheet called Sur_Data from workbook 1 copy to a sheet called Sur_Data_R in the second. All the other features like find next empty row also apply.
I have a workbook with a series of worksheets with stock lists and pricing that I would like a user to be able to select items on (say, with a checkbox) that would then automatically populate a separate master Order Form sheet. The Order Form sheet is currently blank, with headers, and I would like only those items selected on the various stock sheets to be displayed on the Order Form.
View 4 Replies View RelatedI looked at threads realted to printing but wasn ot able to find something similar to what I need. So here is my problem:
I have a file with more than 100 worksheets (each sheet contains the invoice for one store). I would like to create a macro that would enable me to determine the order in which worksheets would be printed. How to do it?
Idea #1: the printing order would be based on the value in cell L1 that would contain the route number for each store. Stores belonging to the same delivery route will have the same value in L1. So, the macro should first print all sheets with 1 in cell L1, then print all sheets with 2 in cell L1 and so on...
Idea #2: Creating a separate data sheet with the list of all stores and their corresponding route number. Let's say info is contained in range A1:B150, where Column A contains the name of the stores and column B contains the route numbers. The macro then should look at that list to determine the printing order of the subsequent worksheets (the name of the store in column A would be the same as the name of the worksheet corresponding to that store).
Idea #3: sorting my 150 worksheets manually. It does not solve my problem fully, though, because stores do not always belong to the same route. So the manual sorting should be carried out daily and would not save time at all.
I have an open workbook (A) and this is where the code should reside. I want to use VBA to copy the content of an entire worksheet from a closed workbook (B) to an existing worksheet in workbook A. How would you accomplish this?
View 7 Replies View RelatedI am looking for a code that would copy the data from each worksheet in a given workbook and then paste to just one worksheet within a different workbook. The Sheet names are auto generated when I run this canned report but the naming structure is always the same...the first worksheet is named Repair Details and then the next sheet is named Repair Details_1, the next sheet is named Repair Details_2 and so on for every sheet in workbook. So I would like to copy all of the data(Headers to last cell) and then paste in a worksheet(ex: Master Repair Report.xlsx and the worksheet could be titled Master Repair Details) on a different workbook, then the next sheet would copy from the one under the header to the last record and paste to the same workbook. This process would repeat for every worksheet in the Repair Details Workbook and paste to Master Repair Details worksheet in the Master Repair Report workbook.
View 4 Replies View RelatedI need to copy a range of values (actually two ranges). The ranges are of fixed size. Le't say A2:D20 and E2:H20.
Both workbooks have the exact same layout, and they both have the same named worksheet (in this case it's called Entry). However the actual filename of the source workbook is unknown. I know numerous users have changed the filename of the xls file.
I want to instruct them to open the old and new workbook, and open a third workbook containing the copy macro, they run the macro and it copies the data.
How can I reference a known worksheet name but of an unknown workbook name esp when the source and destination share the worksheet name?
I have a sheet named sheet9 and i want to copy the data from this workbook-sheet9 to a workbook called import data and sheet named "database".
View 5 Replies View RelatedAll sheets are basically the same except some minor values, names and addresses. There is one page per sheet and all pages are in portrait format. The print preview shows all the pages in order but when I print it, it makes multiple print jobs of 1 to 2 pages each and prints them all out of order. I don't know why it is splitting up the workbook or why it changes the order. I print and reorder these weekly, which is a major pain. It comes out in the same order each time but it is the wrong order.
View 1 Replies View RelatedI am trying to transfer a value from the active worksheet in one workbook to another workbook. I keep getting a subscript out of range error on the line that uses activeworksheet command when I run my code.
View 3 Replies View RelatedI have a Excel workbook with two sheets - 'MainDataSheet' and 'ArchiveSheet' .
The 'MainDataSheet' has 5 columns and one of the column is 'status'.
The 'MainDataSheet' will have a command button 'MoveData' which will trigger the VBA macro to move data rows from 'MainDataSheet' to 'ArchiveSheet' . Only the rows having value set to "MOVE" in the 'status' column have to be moved.
I just need to change a bit of the script so it does not pull from the worksheet with the name 8-11-08 or aug 11. The information im looking to pull will always be in the last worksheets See the hi lighted area below in red is the problem.
One last thing if you take a look at my call script in the last part of this post is there an easier way to do what I'm doing. I know it works just seems like a lot of mess...
I have a sheet full of data.All this long I had written the code to save the selected cells as a PDF.But now I want it to be saved as a separate file. In this case, I believe, first the VBA will have to open a new workbook. Then copy paste this sheet onto one of the sheets in the workbook . then save the .XLM file.
[Code] ..
I've got my macro working on a workbook called 05-14 Clearing TB-orig. From there, it saves as 2 new workbooks called 05-14 Clearing TB-aging and 05-14 Clearing TB-rec. But the new worksheets all keep the name 05-14 Clearing TB-orig. Can I have the macro change the name of each of sheet in the newly created workbooks so that they are the same as the new workbook names? [URL] .....
View 6 Replies View RelatedI am using the (borrowed) code below to select and import a worksheet into my workbook.
View 8 Replies View RelatedI have been struggling with trying to find a way to copy worksheets from one workbook to another. The workbooks change each month. As I was searching the forum for previous threads on this topic, I found this great code, but I need to modify it just a bit and I do not know how to do that. The code allows the user to select the worksheet to import, but it imports it to a new workbook and I need to be able to not only select the sheet to import, but the workbook to import it to.
View 8 Replies View RelatedI have a workbook with 2 worksheets. On sheet 1 (Roster) is a list of names; on sheet 2 (Summaries) is a set of calculations.
I want to create multiple copies of sheet 2 (Summaries) and name them according to the list of names on sheet 1 (Roster).
Creating and naming the worksheets appears to be working fine. The problem is that the worksheets that are added are blank, not copies of worksheet 2.
My code follows.
We're trying to create an invoicing sheet with MS excel for our sub contractors but we also want the information they input to be transfered onto a second work sheet within the work book that has our mark up added.
Problem is that we don't want our sub contractors to see the sheet with the mark up. Is there any way to hide a work sheet or to limit access to the work sheets some one can veiw with in a workbook?
This macro uses data validation and copies new entrys to my Company List sheet. In a different workbook (2.xls). Can this be changed so it copies the nesessery data to workbook 2.xls?
This works if i take the [2.xls] out but only on the same workbook. But i need 1 workbook with the list in and 1 workbook that grabs information from that list and adds to it.
Currently i am using this simple code to copy the relevant sheet in workbook 1 to workbook2.
View 14 Replies View Related
