I just need to change a bit of the script so it does not pull from the worksheet with the name 8-11-08 or aug 11. The information im looking to pull will always be in the last worksheets See the hi lighted area below in red is the problem.
One last thing if you take a look at my call script in the last part of this post is there an easier way to do what I'm doing. I know it works just seems like a lot of mess...
I have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.
How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?
I have code that i use to copy a worksheet of information in one workbook to a worksheet in another workbook. All i need is some guidance on how to copy a second worksheet from workbook 1 to a second worksheet in workbook 2. Should be fairl straight forward.
In the below i am copying the sheet Phone_data to a second work book sheet also called Phone_Data, i would like to include in the same proccess a sheet called Sur_Data from workbook 1 copy to a sheet called Sur_Data_R in the second. All the other features like find next empty row also apply.
I have an open workbook (A) and this is where the code should reside. I want to use VBA to copy the content of an entire worksheet from a closed workbook (B) to an existing worksheet in workbook A. How would you accomplish this?
View 7 Replies View RelatedI am looking for a code that would copy the data from each worksheet in a given workbook and then paste to just one worksheet within a different workbook. The Sheet names are auto generated when I run this canned report but the naming structure is always the same...the first worksheet is named Repair Details and then the next sheet is named Repair Details_1, the next sheet is named Repair Details_2 and so on for every sheet in workbook. So I would like to copy all of the data(Headers to last cell) and then paste in a worksheet(ex: Master Repair Report.xlsx and the worksheet could be titled Master Repair Details) on a different workbook, then the next sheet would copy from the one under the header to the last record and paste to the same workbook. This process would repeat for every worksheet in the Repair Details Workbook and paste to Master Repair Details worksheet in the Master Repair Report workbook.
View 4 Replies View RelatedI need to copy a range of values (actually two ranges). The ranges are of fixed size. Le't say A2:D20 and E2:H20.
Both workbooks have the exact same layout, and they both have the same named worksheet (in this case it's called Entry). However the actual filename of the source workbook is unknown. I know numerous users have changed the filename of the xls file.
I want to instruct them to open the old and new workbook, and open a third workbook containing the copy macro, they run the macro and it copies the data.
How can I reference a known worksheet name but of an unknown workbook name esp when the source and destination share the worksheet name?
I have a sheet named sheet9 and i want to copy the data from this workbook-sheet9 to a workbook called import data and sheet named "database".
View 5 Replies View RelatedI am trying to transfer a value from the active worksheet in one workbook to another workbook. I keep getting a subscript out of range error on the line that uses activeworksheet command when I run my code.
View 3 Replies View RelatedI have a Excel workbook with two sheets - 'MainDataSheet' and 'ArchiveSheet' .
The 'MainDataSheet' has 5 columns and one of the column is 'status'.
The 'MainDataSheet' will have a command button 'MoveData' which will trigger the VBA macro to move data rows from 'MainDataSheet' to 'ArchiveSheet' . Only the rows having value set to "MOVE" in the 'status' column have to be moved.
I have a sheet full of data.All this long I had written the code to save the selected cells as a PDF.But now I want it to be saved as a separate file. In this case, I believe, first the VBA will have to open a new workbook. Then copy paste this sheet onto one of the sheets in the workbook . then save the .XLM file.
[Code] ..
I've got my macro working on a workbook called 05-14 Clearing TB-orig. From there, it saves as 2 new workbooks called 05-14 Clearing TB-aging and 05-14 Clearing TB-rec. But the new worksheets all keep the name 05-14 Clearing TB-orig. Can I have the macro change the name of each of sheet in the newly created workbooks so that they are the same as the new workbook names? [URL] .....
View 6 Replies View RelatedI am using the (borrowed) code below to select and import a worksheet into my workbook.
View 8 Replies View RelatedI have been struggling with trying to find a way to copy worksheets from one workbook to another. The workbooks change each month. As I was searching the forum for previous threads on this topic, I found this great code, but I need to modify it just a bit and I do not know how to do that. The code allows the user to select the worksheet to import, but it imports it to a new workbook and I need to be able to not only select the sheet to import, but the workbook to import it to.
View 8 Replies View RelatedI have a workbook with 2 worksheets. On sheet 1 (Roster) is a list of names; on sheet 2 (Summaries) is a set of calculations.
I want to create multiple copies of sheet 2 (Summaries) and name them according to the list of names on sheet 1 (Roster).
Creating and naming the worksheets appears to be working fine. The problem is that the worksheets that are added are blank, not copies of worksheet 2.
My code follows.
We're trying to create an invoicing sheet with MS excel for our sub contractors but we also want the information they input to be transfered onto a second work sheet within the work book that has our mark up added.
Problem is that we don't want our sub contractors to see the sheet with the mark up. Is there any way to hide a work sheet or to limit access to the work sheets some one can veiw with in a workbook?
This macro uses data validation and copies new entrys to my Company List sheet. In a different workbook (2.xls). Can this be changed so it copies the nesessery data to workbook 2.xls?
This works if i take the [2.xls] out but only on the same workbook. But i need 1 workbook with the list in and 1 workbook that grabs information from that list and adds to it.
Currently i am using this simple code to copy the relevant sheet in workbook 1 to workbook2.
View 14 Replies View RelatedI am running VBA that will open a new workbook, at the end of that VBA code I have a line of code that reads:
Code:
Sheets("Sheet1").Select
ActiveWindow.SelectedSheets.Delete
When the code hits those lines it throws a VBA error 400. What do I need to do to have Sheet1 deleted from the "new" workbook?
Though VBA I am trying to copy one worksheet into a new workbook. This worksheet contains Graphs which point to other datasheets in the same workbook.
I first copy the data worksheets, then I copy over the worksheet with graphs. However the graphs link to the original worksheet name- not to the datasheets in the same workbook as the newly created workbook. This is a problem since I am going to send this other workbook to users and they won't have access to the orginal datasheet.
I copy the sheets using the code:
Set wsheet = inbook.Sheets("Division")
wsheet.Copy after:=gobjOutBook.Sheets("Executive Summary")
Where the worksheet DIVISION is the worksheet containing the graphs and the data sheets are already copied there.
The macro below copies certain sheets from one workbook to another, however the worksheets are protected in the original but when they are copied to the new workbook the protection is removed. Is there any way to keep them protected once copied?
I also have a couple of buttons with macros assigned to them one of which I would like to remove when the worksheets are copied to the new workbook, is this possible?
Code:
Sub REN_REPEAT()
' Rename
Dim myName As String
'Copies the sheets to a new workbook:
Sheets(Array("NEW_ORDER_", "CP_NOTES", "DATA")).Copy
[Code] ........
I have a workbook with multiple worksheets. Most have data. 2 have been hidden or something. The tabs are there but there is nothin on them. No grid lines, not a blank worksheet. It is blue. What does this mean? How do you do that? How do I un-hide to find if there is data there...etc.
Like I said, the tab is showing amoung all the other tabs, but there is nothing - no worksheet - just blue.
I have some code that adds worksheets to a workbook and names them appropriately, I now need to change that to add the worksheets at the beginning of the workbook and am struggling with the syntax.
My first sheet is sheet1.
I need to change this piece of code
Sheets.Add After:=Sheets(Sheets.Count)
I have a macro that will create multiple worksheets (up to 19) within the same workbook. There could be any combination and/or count of the worksheets, but I would like to place them in the same order every time. For example 1,2,3,4,5 or 1,2,4,5 depending on the number outputted. However these tabs will not be in alpha or numeric order.
Is there a way to create a final line(s) of vba code to place these tabs in the preferred order?
I am trying to copy a worksheet called "Survey Extract Agents" from one workbook into another called "Raw Test Data". "Raw Test Data" is also the name of the sheet in the workbook of the same name. I want the "Survey Extract Agents" to be inserted after the "Raw Test Data" sheet. My macro keeps choking on it....
View 9 Replies View Relatedhow to convert a worksheet in a workbook to pdf using VB?
View 9 Replies View Relatedi've been programming VBA code but it seems that i can no longer copy or move a worksheet within the workbook i was working on...
View 9 Replies View RelatedI have a set of worksheets that need to be moved to their own individual master sheets. i.e. FW32Lightning.csv needs to be moved to Lightning.xls which has all of the fiscal weeks in it as seperate. I know the generic way of doing this, but I need to know how do I write the macro that when I run it every week I don't have to go in and change the fiscal week.
View 5 Replies View RelatedI have a workbook containing a number worksheets. I need to copy one of these sheets and move it to a new workbook before copying and pasting the contents as values and saving as a new worksheet. Ideally the new workbook I'm creating would contain no other worksheets other than the one I'm copying in.
View 3 Replies View Related1. When the workbook to be closed ("Workbook before close"), add a new workbook ( saving the filename as Range("D6") & Range ("D5").xls).
2. Save the first workbook as in folder "Range("D6")" with filename of Range ("D5").xls
3.Copy the sheet called "Workbench 1" (values only) from the first workbook to the second one.
4. Save the new workbook again, then close both.
I have a save button on a user form that saves a workbook
Private Sub SaveBookbtn_Click()
' SaveAs using data from workbook cells
Dim ThisFile As String
Dim TheFilename As String
ThisFile = Sheets("Sheet1").Range("A2").Value
TheFilename = Application.GetSaveAsFilename _
(ThisFile, filefilter:="Excel Files, *.xls")
If TheFilename = "False" Then Exit Sub
ThisWorkbook.SaveAs TheFilename
ThisWorkbook.Close
End Sub
But what I would like to do is save just "sheet1", and not the whole workbook, using ThisFile as the name to save it under - where I can choose which directory it can go in. I have tried to modify the code to get the desired results but I can't seem to crack it. Can the above code be modified to do the job or am I going to have to start from scratch?
