Show AutoFilter Criteria In Cell
Aug 6, 2006I attached a small file in which I filtered on Cities. And now I am looking for a VBA to copy the filter to an empty cell. Is this possible?
ADVERTISEMENT
Show Autofilter Criteria
Apr 16, 2006You posted this code and it works well
could u advise how to display just the criteria ie no heading, no :, no =, and when it displays the criteria could it fill the cell with a colour. When filter is set to "all" give a blank cell
This would over come lots complaints from operators not realizing that filters are on because they can not find the silly blue button.
Are microsoft aware of is and are they changing it in the new release.
AutoFilter Multiple Field Automatically (and Show All If Criteria Is Blank)
Jun 11, 2014I am looking to adapt a piece of code (originally created by Ger Plante) so that it autofilters multiple columns of a table. I have three data validated lists that need to search 3 different columns in the table and filter accordingly, but also show all if no hits are made (hence why Ger Plante's code) was perfect in most respects. I would ideally like to keep the code as a Worksheet_Change event, but can deal with it being run as a normal Macro via a button if this is necessary.
[URL]....
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("B1")) Is Nothing Then
Range("A5:C5").AutoFilter Field:=1, Criteria1:=IIf(Trim(Range("B1").Text) = "", "<>", "=") & Range("B1").Text
End If
End Sub
Use Cell As Autofilter Criteria
Aug 18, 2008I have one master sheet of data, with a large number of fields and data.
I need to turn this master data into individual records, each record exisiting as an individual worksheet - lets call it a 'U'. The U is a template sheet which has calculations and lookups built into it to complete further information. The completed U's are then used by a number of people for different reasons. There are 3 main 'flavours' of these sheets which have slightly different uses.
I've gone from knowing nothing about macros to having learned enough about them in the last week or so to populate each individual sheet with the data, and save the new file in the location I want it to go.
What I want to do now is filter the fields displayed by the individual U sheets, as not every field is applicable to each 'flavour'. I've marked up the rows as to the appropriate flavour - e.g. Row 17 is applicable to 'P' 'F' and 'R' ( Cell which is auto filtered contains PFR), but Row 18 is only 'P' and 'F' (Cell contains PF).
I've gone through the master file and identified each entry as a the appropriate flavour - to summarise what I'd like to do now:
1) Automatically populate the template file with the relevant data. (which my macro will do)
2) Use an autofilter to filter the rows equal to the data in the reference sheet so these are the only ones displayed. Eg. Reference sheet says 'P', so I want to filter the U sheet where autofilter column contains the letter 'P'
3) Rename the file and save as my reference in the location I want it to (which the macro is doing).
Here's what I've got:
Range("CF3").Select
Selection.Copy
Windows("USS iss1.xls").Activate
Range("G158").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Selection.AutoFilter Field:=1, Criteria1:=ActiveCell, Operator:=xlAnd
(where CF3 = the cell in the master data with the flavour in it, "USS iss1" is the template U file, G158 is a spare cell and Autofilter Field 1 contains the row reference which tells me which data applies to which flavours).
I've tried using the macro recorder, which when I paste the value in the autofilter/contains box records it as the value I've just put in rather than a copy of the reference cell. I've tried
Criteria1:=*ActiveCell*
and other variations on the same theme, but to no avail - I get "Compile error: Expected:expression".
Use Cell & Wilcard For VBA Autofilter Criteria
Sep 12, 2007Problem: utofilter criteria
Explanation
This has been my Autofilter criteria to date
Criteria1 = " " (needed for other macros)
Criteria2 = "=2007*" (i.e. starts with JobYear)
This works fine but now I am wanting Criteria2 to be linked to a cell where the user will enter the job year to be filtered.
Solution
My guess at solutions would be:
Criteria1 = " "
Criteria2 = Cell*
or
Criteria2 = Cell & "*"
Unfortunatley I have been unable to find any way of making this happen. Using an Autofilter to link to a cell is standard but making an Autofilter link to a cell with a starts with criteria attached doesn't seem to be doable.
AutoFilter Using Active Cell As Criteria
Apr 29, 2008My excel file has a column for customer name (there are more columns btw). I have the filter feature on. The customer list is in column F.
I recorded a macro by copying a customer (from the customer column, say from cell F99). Then I click on the filter arrow and select the 'custom' option and in the dialog box that comes up, I paste the copied customer and try to find other records which have the same customer name.
This works great but when I run the macro for some other customer, say from cell F200, the pasting part, pastes the customer that I had selected when recording the macro.
Is there a solution to make this generic so that the macro will work in a manner that I simply highlight the cell of the desired customer and then then run the macro which will give me the result.
Multiple Criteria On Autofilter From Single Cell
Mar 18, 2013I'm trying to add to my code an autofiler with multiple criteria, the criteria is held in single cell. The criteria is made up of anything from 5 to 30 cells, then i have tried to concatenate these separated by commas, in speech marks, speech marks and commas etc., set them as an array the use that in my filter, but nothing seems to work.
View 6 Replies View RelatedAutoFilter Macro Using Cell Content As Criteria
Oct 5, 2006I was wondering if I could pick up the Field number and the criteria from a cell in excel rather than changing the code in VBA.
Range("A1:K1"). AutoFilter Field:=Range("A1"), Criteria1:=Range("B1")
I was trying this code but I got an error message. Does anyone know if I can pick up these information directly from excel.
Autofilter Macro: Goto The Next Criteria Down Until Certain Criteria Is Reached
Oct 22, 2008I am trying to make an "intelligent" auto filter that with filter with increasing restriction until a certain criteria is met.
The list runs from A5:G20. In coloumn G is the number of hours associated with each event. And in A1 I have the percentage of items showing/whole list so it I have 15 rows on the list, and I filter so that only 5 are showing, cell a1=33%
How can I make a macro that will autofilter until the the a1=5%
Like having filter criter = equal or greater then 1 hour,
if a1 > 5%
Then criteria + 1 hour
If A1=<5%, then stop.
basically a seed criteria of 1 hour, adding 1 hour until the value in a1 = 5%
Autofilter Show All
Apr 27, 2007I have autofilter enabled on the header row across the top of my worksheet.
Is there a quick line of VBA I can use to toggle EACH one to (ALL). This would act as a "Reset" in my spreadsheet and display everything.
Show Sum Of Only Numbers Seen Via Autofilter
Jan 7, 2009I want to have a cell report the sum of a column and have that sum change depending on which values I have filtered on another column. I have a cell reporting a sum of times in column E, but if I filter Column F to show only jobs for 1/16/09, I want that number to display the total time for just those shown. At this point, it just shows the total regardless of what is filtered.
View 3 Replies View RelatedAutoFilter Code: Show All Data
Sep 5, 2006I have some code for applying various filters, up to a maximum of five. However, not all five fields need necessarily have any filter but I can't find a way in the vaConditions line to show 'no filter' or 'All'.
vaFields = VBA. Array(1, 3, 4, 9, 10)
vaConditions = VBA.Array("", "", "", ">20", "")
Set rngData = Worksheets("CECO 2005").UsedRange
For i = 0 To 4
rngData.AutoFilter Field:=vaFields(i), Criteria1:=vaConditions(i)
Next i
Copy Top Cell Post Autofilter And Reapply Autofilter Based On Cell Value
Aug 20, 2014I can select the top cell in column "F" after filtering by multiple columns using VBA and arrays, but now want to I want to use the top cell in column "F" to search for all other equipment that uses this item.
E.g. remove filter, and reapply autofilter to column "F" based on selected cell as per below VBA
Note: Row 1 contains command buttons and row 2 Headers.
AutoFilter Does Not Show All Records In Dropdown Menu?
Jun 19, 2014Why auto filter does not show all the records in drop down menu ?
View 2 Replies View RelatedUpdate AutoFilter In VBA To Show Current Date
Aug 11, 2009I have a similar issue, but it's with a date field. Every day, I go in and check the current day to show the current days data(on a Pivot table). Is there a way to modify this code so the AutoFilters update and "check" up to the current day?
View 2 Replies View RelatedShow/Display All AutoFilter Data On All Worksheets
Sep 5, 2006i have the code below attached to a button and was wanting to know how (if possible) i could do the same thing but to all sheets so that i could have one button that removed all the autofilters in the work book ....
View 9 Replies View RelatedAutofilter - Show All On Shared/protected Sheet
May 1, 2007I have autofilter enabled on the header row across the top of my worksheet. Is there a quick line of VBA I can use to toggle EACH one to (ALL). This would act as a "Reset" in my spreadsheet and display all content. I had a solution that worked, until I made the workbook shared / password protected.
View 3 Replies View RelatedExcel 2010 :: Not Show Blanks In Dropdown List With AutoFilter?
Jul 21, 2014How can I get the dropdown list to not include blank cells in the list reguardless if the sort filter is used or not.
Sheet 1 (STATS) is the dropdownlist Cell B12
Sheet 2 (Orders) is the data, I cant convert to tables because the cells are active and storted Column B2: is the data named.
so I have to use a formula to do this.
Using Excel 2010
See attached sample
Sample.xlsm
Autofilter On More Than 2 Criteria
May 15, 2008Say you have a long list of data, and you go to Data menu --> Filter --> AutoFilter
And then you want to use the Custom AutoFilter. Here's a screenshot:
[url]
Is there any way to do MORE than two autofilters?
MSG Box Autofilter Criteria
Jul 23, 2009Been looking at various options. Just want something to simply show the autofilter critera (1 & 2 or how every many there are) in a text box. The range being filtered is column A : M.
Basically taking this further, want to use the criteria of column C to lookup an email address e.g.
'C' is filtered by "Company 96"
Lookup "Company 96" from sheet2 range A:B, with column A containing name, and column B containing email address
Macro - AutoFilter And Criteria
Aug 7, 2014My problem is following: I have a list of data that are classified according to a particular character, and I want to copy (with auto filter through the macro) the relevant information to the appropriate place in the sheet where it belongs. That's no problem. The problem is that if I want to copy data, classified by a character that is not listed in the table (that is not in the filtering criteria), then all the data are copied to the appropriate place. But I do not want to copy in this case nothing. How should such a macro look like?
Find attached an example : example.xlsm
Autofilter With Offset Criteria
Dec 4, 2011This is the following code i have a problem with:
ActiveSheet.Range("$B:$J").AutoFilter Field:=1, Criteria1:=Sheets("Report").Cell(0, -2).Value
I am trying to filter items on a sheet called "all the answers" and i want to look up a value on the sheet called "Report" to filter.
The cell i want to filter is two cells to the left of the active cell on that sheet.
Autofilter With Multiple Criteria?
Oct 5, 2012I have some data which I want to apply multiple criteria to for a particular column. Searched around on the internet and it would appear I should use an array and pass that to my criteria. What I can't find an answer for is how to say "does not equal any of the values within the array"
Code currently is:
Code:
Dim NumberFilter_Array(0 to 2)
NumberFilter_Array(0) = 2
NumberFilter_Array(1) = 9
[Code].....
I've tried variations for that in red but can't get it to work, how to correct the line in red to filter for none of the values in the array NumberFilter_Array?
AutoFilter With Multiple Criteria
Nov 1, 2012I am trying to use VBA to set an autofilter that hides all zeros in Column AL and then excludes all values in Column E that start with "312" or "502". For some reason I can't get this to work as expected, it still continues to display unwanted values in Column E.
HTML Code:
ActiveSheet.Range("$A$1:$CS" & LastRow).AutoFilter Field:=5, Criteria1:=Array("312*", "502*")
ActiveSheet.Range("$A$1:$CS" & LastRow).AutoFilter Field:=38, Criteria1:=Array("0")
Adding Criteria To AutoFilter?
Apr 30, 2014Is there a way to add a dynamic number of criteria(based on user input) to an autofilter.
Code:
ActiveSheet.Cells(1, 1).AutoFilter Field:=1, Criteria1:= dynamicfilters
Autofilter With Variable Criteria
May 16, 2006I'm actually trying to write a Macro that applies autofilters and the information just doesn't show! The autofilter is properly applied and everything, but the only visible row is the header. The code is the following.
mes = Month([M2])
filfecha = Range("M2").Text
Columns("E").AutoFit
Rows("1:1").Select
Selection.AutoFilter
Selection.AutoFilter Field:=5, Criteria1:=filfecha
Autofilter Criteria From Textbox
Mar 5, 2007I would like to do some search function. As I know, to have "contains" in criteria, I can simply add *. But then, the asterisk(*) doesnt work with forms. I want my user to put the word they are looking for in a form then the system will select from a different worksheet. Below is my coding and bold is my biggest problem.
Sub Advanced_Find()
company = Workbooks("CONTRACT").Sheets("Advanced Find"). Cells(9, 3).Value
Workbooks("CONTRACT").Sheets("Sheet2").Activate
Range("C3"). AutoFilter Field:=3, Criteria1:=*company*, Operator:=xlAnd
Sheets("Sheet2").Rows(3).Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Application.WindowState = xlMinimized
Workbooks("CONTRACT").Sheets("Advanced Find").Activate
Workbooks("CONTRACT").Sheets("Advanced Find").Cells(15, 1).Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub()
Comparing Autofilter Criteria
Mar 16, 2007I want to write a VBA routine to compare the Autofilter criteria found on two different worksheets. If the criteria is not the same I will display an error message. The range the Autofilter is working on could be one to many columns. The criteria could be anything from selecting a value from the autofilter list to multiple columns using a custom autofilter with multiple conditions.
View 2 Replies View RelatedRange Name In Autofilter Criteria
Jun 22, 2007I'm trying to make the criteria in an autofilter bit of code be the value of a cell in my spreadhseet. I have named the cell and would like to reference the named range rather than the cell address if possible.
Exp = Range("ExpenseGroup")
Sheets("Sheet2").Select
Selection.AutoFilter Field:=2, Criteria1:=Exp
Sheets("KPICharts").Select
Range("A1").Select
ExpenseGroup is my range which is located on sheet "cntrl" cell "G5"
When I run my code it referes to line 1 and says" Function call on lefthand side of assignment must return a Varient or Object".
Display Criteria Of Autofilter
Dec 31, 2007I have the following code based on Multiple user-selected dropdowns. What I need to add is I believe a Volatile Application, where if the user chooses the option "ALL" OR leaves blank (doesn't pick anything from the dropdown,) the respective column does not get Autofilter applied. I have 6 different criteria, including a Start Date and End Date. So, the final result I'm trying to get is to have autofilter applied to only those columns for which the user selected a specific option.
Dim dDate As Date
Dim strDate As String
Dim lDate As Long
Dim rDate As Range
Worksheets("Data").AutoFilterMode = False
Set rDate = Sheets("Summary").Range("B3")
If Not IsDate(rDate) Then 'Check if valid
MsgBox "Non valid date and time"
Exit Sub
End If