I'm trying to add to my code an autofiler with multiple criteria, the criteria is held in single cell. The criteria is made up of anything from 5 to 30 cells, then i have tried to concatenate these separated by commas, in speech marks, speech marks and commas etc., set them as an array the use that in my filter, but nothing seems to work.
View 6 Replies
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project
Benefit Type
Delivered or Enabled
Benefit
PJ1
Financial
Delivered
Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
Continued maintenance of hardware.
Increased capacity.
Is there any method to speed up a for each loop to count text in a cell with multiple criterias in a single column. This is on example:
Code:
For each rr in r
If rr = "a" And rr.Font.Strikethrough = False Or rr = "B" _
And rr.Font.Strikethrough = False Then
a = a + 1
end if
next
I have some data which I want to apply multiple criteria to for a particular column. Searched around on the internet and it would appear I should use an array and pass that to my criteria. What I can't find an answer for is how to say "does not equal any of the values within the array"
Code currently is:
Code:
Dim NumberFilter_Array(0 to 2)
NumberFilter_Array(0) = 2
NumberFilter_Array(1) = 9
[Code].....
I've tried variations for that in red but can't get it to work, how to correct the line in red to filter for none of the values in the array NumberFilter_Array?
I am trying to use VBA to set an autofilter that hides all zeros in Column AL and then excludes all values in Column E that start with "312" or "502". For some reason I can't get this to work as expected, it still continues to display unwanted values in Column E.
HTML Code:
ActiveSheet.Range("$A$1:$CS" & LastRow).AutoFilter Field:=5, Criteria1:=Array("312*", "502*")
ActiveSheet.Range("$A$1:$CS" & LastRow).AutoFilter Field:=38, Criteria1:=Array("0")
I'm trying to program a macro that filters out codes in an autofilter list. There are about 40 codes in total, however I only want excel to display 3. The current script I am using is below. I know excel lets you filter for 2 criterias in this format, however is 3 or more too much? What would be the best way around this problem?
Selection.AutoFilter Field:=4, Criteria1:="=COR", Operator:=xlOr, _
Criteria2:="=REM", Operator:=x1Or, _ Criteria3:="=REA"
I thought I had been able to use array to have more than two criterias with Autofilter, but now I am unable to make the following code work. What I am trying to do is have all the records that does not contain either N/A, S/O or xx and also have a filter on column 125 for the value "OUI".
VB:
Sub test()
Set ws1 = ThisWorkbook.Sheets("SOMMAIRE_EN_ALL")
Set ws2 = Workbooks("Fichier_central_2013_anglais_2_CLEAN").Sheets("DETAIL_CONCAT")
Set r = ws2.Range("A1:du4783")
[Code] .....
I am looking to adapt a piece of code (originally created by Ger Plante) so that it autofilters multiple columns of a table. I have three data validated lists that need to search 3 different columns in the table and filter accordingly, but also show all if no hits are made (hence why Ger Plante's code) was perfect in most respects. I would ideally like to keep the code as a Worksheet_Change event, but can deal with it being run as a normal Macro via a button if this is necessary.
[URL]....
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("B1")) Is Nothing Then
Range("A5:C5").AutoFilter Field:=1, Criteria1:=IIf(Trim(Range("B1").Text) = "", "<>", "=") & Range("B1").Text
End If
End Sub
IM trying to add the result of multiple ranges sharing a single criteria and have had no luck. I am trying to get the range from every other colum and have the total qty of the selected criteria display in a single cell. The best way to describe is countif with multiple ranges and a single criteria. perhaps countif isnt the answer, it is the only way i know to describe the issue though.
View 3 Replies View RelatedI have one master sheet of data, with a large number of fields and data.
I need to turn this master data into individual records, each record exisiting as an individual worksheet - lets call it a 'U'. The U is a template sheet which has calculations and lookups built into it to complete further information. The completed U's are then used by a number of people for different reasons. There are 3 main 'flavours' of these sheets which have slightly different uses.
I've gone from knowing nothing about macros to having learned enough about them in the last week or so to populate each individual sheet with the data, and save the new file in the location I want it to go.
What I want to do now is filter the fields displayed by the individual U sheets, as not every field is applicable to each 'flavour'. I've marked up the rows as to the appropriate flavour - e.g. Row 17 is applicable to 'P' 'F' and 'R' ( Cell which is auto filtered contains PFR), but Row 18 is only 'P' and 'F' (Cell contains PF).
I've gone through the master file and identified each entry as a the appropriate flavour - to summarise what I'd like to do now:
1) Automatically populate the template file with the relevant data. (which my macro will do)
2) Use an autofilter to filter the rows equal to the data in the reference sheet so these are the only ones displayed. Eg. Reference sheet says 'P', so I want to filter the U sheet where autofilter column contains the letter 'P'
3) Rename the file and save as my reference in the location I want it to (which the macro is doing).
Here's what I've got:
Range("CF3").Select
Selection.Copy
Windows("USS iss1.xls").Activate
Range("G158").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Selection.AutoFilter Field:=1, Criteria1:=ActiveCell, Operator:=xlAnd
(where CF3 = the cell in the master data with the flavour in it, "USS iss1" is the template U file, G158 is a spare cell and Autofilter Field 1 contains the row reference which tells me which data applies to which flavours).
I've tried using the macro recorder, which when I paste the value in the autofilter/contains box records it as the value I've just put in rather than a copy of the reference cell. I've tried
Criteria1:=*ActiveCell*
and other variations on the same theme, but to no avail - I get "Compile error: Expected:expression".
i am looking some formula to make sequence number with criteria;
1) if in cell B2 contains only single/one data ----the result is mark "-"
2) if in cell B2 contains several data (not single)----the result is auto numbering with adding mark "." (dot) and start from 1.,2.,3.,4,etc........
for the detail,
condition 1 (multiple data in col.B)
number
name
1.
john
2.
mike
3.
sisca
etc...
condition 2 (single data in col.B)
number
name
I have a spreadsheet with multiple columns. The first column defines a "route", and the next two list "start" and "end" cities for that route. The fourth column lists the length of each route. There are only a limited number of cities, so the same entries appear in both "start" and "end" several times. I would like to use Autofilter to sort the list for every appearance of a given entry in either "start" or "end". Is there a way to make Autofilter sort mutiple columns simultaneously?
I could achieve the desired end result with Advanced Filter, but I want something with the ease-of-use and immediate update/response of Autofilter. Advanced Filter requires explanation (as well as lots of clicking and typing) whereas Autofilter is self-evident. I also want to avoid VBA Macros as they are not well-understood by the users who will use this spreadsheet (and any VBA Macro will require very specific input to work properly.) Is it possible to do what I want? Or is Advanced Filter / VBA the only way to do it?
I attached a small file in which I filtered on Cities. And now I am looking for a VBA to copy the filter to an empty cell. Is this possible?
Problem: utofilter criteria
Explanation
This has been my Autofilter criteria to date
Criteria1 = " " (needed for other macros)
Criteria2 = "=2007*" (i.e. starts with JobYear)
This works fine but now I am wanting Criteria2 to be linked to a cell where the user will enter the job year to be filtered.
Solution
My guess at solutions would be:
Criteria1 = " "
Criteria2 = Cell*
or
Criteria2 = Cell & "*"
Unfortunatley I have been unable to find any way of making this happen. Using an Autofilter to link to a cell is standard but making an Autofilter link to a cell with a starts with criteria attached doesn't seem to be doable.
My excel file has a column for customer name (there are more columns btw). I have the filter feature on. The customer list is in column F.
I recorded a macro by copying a customer (from the customer column, say from cell F99). Then I click on the filter arrow and select the 'custom' option and in the dialog box that comes up, I paste the copied customer and try to find other records which have the same customer name.
This works great but when I run the macro for some other customer, say from cell F200, the pasting part, pastes the customer that I had selected when recording the macro.
Is there a solution to make this generic so that the macro will work in a manner that I simply highlight the cell of the desired customer and then then run the macro which will give me the result.
I have two workbooks at the moment, one which holds a whole host of customer and accounts details and another which holds only the customer details. What I'm trying to do is cross reference the two to determine if a customers details appear on both and if they do highlight this, ultimately I'd like it to pull the customers account number back but even if it highlights a match that would be sufficient.
The only unique criteria I have to do this are customer surname and customer postcode.
In the Customer details spreadsheet I'm attempting to enter a formula which will look at the specific surname & postcode held on the row in which it is entered. It will then look at all of the rows on the other spreadsheet and determine whether any of them meet both criteria.
If they do I'd like it to display "match" if they don't I'd like it to display "no match"
Attached is a sample workbook, but essentially what I'm looking to do is automate the process of searching through a data set where the value of interest (in this case, names) often has multiple entries, with different values attached to each instance.
I would like to be able to get a list of all values in a given column that match a specific name in another column.
Currently I'm using a basic INDEX/MATCH search just to see whether the data exists at all, but that's only half of what I have to do here, and I'm totally stumped on how to get a comprehensive list of all matches.
For reference, if you look at the sample, what I need is a list of all values in the "CPT" column that match the name searched for in the first column.
The actual data set size is at most 3-400 entries, if that makes a difference in how to approach this.
CPT Sample Book.xlsx
I was wondering if I could pick up the Field number and the criteria from a cell in excel rather than changing the code in VBA.
Range("A1:K1"). AutoFilter Field:=Range("A1"), Criteria1:=Range("B1")
I was trying this code but I got an error message. Does anyone know if I can pick up these information directly from excel.
I have a text file containing internet explorer browser history. The file has data in the following format (in Excel all data is in 1 column): ...
View 9 Replies View RelatedI have a workbook with many sheets of similar but not identical data. I need to extract columns from each sheet based on 5 header criteria and paste them to a single sheet. Each worksheet contains these 5 criteria.
I've been working with the VBA script I've pasted below. It's grabbing the 5 column criteria that I have in sheet 12, and comparing them to sheet 1 in the workbook, then copying them to sheet 12. This much is good, but I need the script to also return the data from the other worksheets as well. I've tried modifying the script based on other loop functions in other scripts I've found, but I'm not having any luck.
I have encountered a situation where I need to essentially accomplish a reverse Vlookup (using index match) and return multiple values.
View 1 Replies View RelatedIf I have, in one cell (call it D1):
EH,DR,HU
and in a lookup table on another sheet:
A B
1 ED T
2 EH F
3 DR G
4 HU H
5 SE E
6 YU E
I need to be able to lookup the values in D1 on the table and return the values in column B to a single cell (say E1), also comma separated...
eg...
F,G,H
I am trying to come up with a simple formula to count a single cell if it contains either a 2 or 3.
The cell can contain numbers ranging from 0-8.
Even better would be if I could some how evaluate single cells based on the contents and then count the number of cells where the criteria for contents is true. The problem is the criteria differs from cell to cell (i.e. D2 could = 2 or 3, but E2 needs to be counted only if it contains a 4 or 5).
I know COUNTIFS only evaluate a range but it would be perfect if I could somehow get it to work for single cells. COUNTIFS(D2,2,D2,3,E2,3,E2,4,F2,2)
I'm making a database for people to easily find their documents at work. In some cells there are multiple entries because the document could be within two catagories, eg. memo and report. Is it possible to somehow list these multiple entries within the cell so that the autofilter will recognise them as seperate entries and find that document whether you filter for memo or report? If not, can you get the filter to search more than one column for the same result and show all entries that are, say, a memo, even if it says so in different columns? I want it to be as simple as possible for the user so that they can select what they want from the drop-down menu and not
View 9 Replies View RelatedI am looking to split multiple different entries in a single cell into multiple columns and repeat this for all rows
Example (I have the below in a single Cell as column headers)
NCM Server Mgmt VLAN Site ID
Next Line down is the data (Each row in a single cell)
Enabled 10.10.10.0 50 TEST SITE 1
Enabled 10.10.20.0 50 TEST SITE 2
Disabled 10.10.30.0 50 TEST SITE 3
How I could achieve this as I have a number of projects where this would become useful
I know you can use delimiters but with spaces between the values I just can't fathom a way forward.
I am trying to make an "intelligent" auto filter that with filter with increasing restriction until a certain criteria is met.
The list runs from A5:G20. In coloumn G is the number of hours associated with each event. And in A1 I have the percentage of items showing/whole list so it I have 15 rows on the list, and I filter so that only 5 are showing, cell a1=33%
How can I make a macro that will autofilter until the the a1=5%
Like having filter criter = equal or greater then 1 hour,
if a1 > 5%
Then criteria + 1 hour
If A1=<5%, then stop.
basically a seed criteria of 1 hour, adding 1 hour until the value in a1 = 5%
Here’s an example of my data:
A B
1110AAAAAAA
2220BBBBBBBB
3330CCCCCCCC
4330DDDDDDD
5330EEEEEEEEE
6440FFFFFFFFF
7440GGGGGGG
8550HHHHHHH
I need your help to figure out how to merge the above data to look like this in new blank worksheet using a VBA macro:
A B
1110AAAAAAA
2220BBBBBBBB
3330CCCCCCCC
DDDDDDD
EEEEEEEE
4440FFFFFFFFF
GGGGGGG
5550HHHHHHH
I can select the top cell in column "F" after filtering by multiple columns using VBA and arrays, but now want to I want to use the top cell in column "F" to search for all other equipment that uses this item.
E.g. remove filter, and reapply autofilter to column "F" based on selected cell as per below VBA
Note: Row 1 contains command buttons and row 2 Headers.
Find Multiple instances of Numeric Criterion in Row & Return To a Single
Column.
I have a Dynamic Named Range "Data" spanning 10 Columns and many Rows.
Each Row may contain duplicates of the Numeric Criterion.
I would like to find ALL instances of a specific Numeric Criterion across
each single Row in the Dynamic Range "Data" and have the Results returned to
a New Sheet in a single column.
NEW Sheet:
The Numeric Criterion is housed in G5.
The matched criterion should be returned to the New Sheet starting at G7.
Duplicate instances in the same Row should ALL be returned to the same cell
in Column G on the New Sheet.
Sample Data Layout:
Columns I J K L M N O P Q R
Row No.76 1 0 1 1 0 1 1 1 0 1
Row No.77 2 2 3 2 1 2 2 0 0 0
Row No.78 3 3 3 3 3 0 3 0 3 0
Scenario:
Looking for Numeric Criterion 1 (one).
Expected Results - New Sheet:
Row No.7 Column G (Cell G7) 1111111
Row No.8 Column G (Cell G8) 1
In Row 76 of the Sample Data ALL seven Numeric Criterion of 1 (one) should be
returned to the same cell G7.
In Row 77 of the Sample Data there is only one Numeric Criterion of 1 and it
should be returned to cell G8.
I am looking for creating a dynamic meeting log/calendar for my team. There's a couple of elements to my questions below:
I have a log with columns such as "Meeting Date", "Client", "Attendee" and have also set up month calendars on separate tabs which automatically update the dates according to a "Year" toggle using Janoffset, Feboffset, etc.
What I would like to do is have these calendars automatically populate a cell beneath each date with any meetings on that day. The client name and then a space then the attendee in brackets would be sufficient and with each meeting having its own line in the cell).
I have gotten a Vlookup working but have run into two snags: 1) where there is more than one meeting on a single day 2) I can only return one piece of information in the cell or otherwise have it blank, I can't have the client name AND attendee.
Is there any way to lookup all of that information in the one cell or is this just a pipe dream?
I have attached my workbook which contains my workings so far and in the first cell of Jan shown the "ideal" format. I'd like the data in.
