Show/Display All AutoFilter Data On All Worksheets
Sep 5, 2006
i have the code below attached to a button and was wanting to know how (if possible) i could do the same thing but to all sheets so that i could have one button that removed all the autofilters in the work book ....
View 9 Replies
ADVERTISEMENT
Sep 5, 2006
I have some code for applying various filters, up to a maximum of five. However, not all five fields need necessarily have any filter but I can't find a way in the vaConditions line to show 'no filter' or 'All'.
vaFields = VBA. Array(1, 3, 4, 9, 10)
vaConditions = VBA.Array("", "", "", ">20", "")
Set rngData = Worksheets("CECO 2005").UsedRange
For i = 0 To 4
rngData.AutoFilter Field:=vaFields(i), Criteria1:=vaConditions(i)
Next i
View 3 Replies
View Related
Mar 5, 2014
I created a userform to filter some data according to some specifications and then spit out the results. After some tinkering, I've gotten everything to work as far as I can tell. Though it isn't mandatory, I would like to get a message to pop up telling the user if no results matched their specifications. I've included some of my code for reference.
'Filter results upon clicking SearchButton
Range("A1:I73").Select
Selection.AutoFilter
Selection.AutoFilter Field:=3, Criteria1:=LiqEndComboBox.Value
Selection.AutoFilter Field:=4, Criteria1:=SealsComboBox.Value
'PressureTextBox filter
[Code] .........
View 3 Replies
View Related
May 5, 2014
I am trying show an exact match of data between two worksheets, but I need the match function to look up 2 columns - i.e. reference number AND order number between two different worksheets.
In the example attached, I am able to find the match of one column only (order number)
View 7 Replies
View Related
Mar 8, 2008
I am trying to figure out how to initialise a multipage userform. I have two worksheets, one with a contact 'database', and one temp that holds search results.
I understand how to load data from the worksheet and write it back using a single useform, but this is foxing me just a tad!
View 3 Replies
View Related
Feb 23, 2014
I data on a master document and have data sent in from various independent offices which I would like to reconcile. Each region along with the master is posted onto a separate worksheet in my spreadsheet but I would like to copy specific information in worksheet order and paste row by row onto single worksheet in order to run a comparison. The data needed is in the same order but the number of rows reported on each work sheet will differ day by day. If worksheet 1 displays 50 rows in the consolidated sheet I would like worksheet 2 start in row 51, if however worksheet 1 finished in 24, I would like worksheet 2 to start in 25. Now I also want each worksheet to start reporting once the previous worksheet is complete and when there is no data in a specific worksheet, I would like the process to be able to continue.. so sheet 1 reports, then sheet 2 but sheet 3 has no data so it jumps to sheet 4 to begin.
For example consider various cities, New York, London, Frankfurt & Tokyo, each has sales of various products from a catalogue range but the products sold differ each week based on regional trends. The master document which is independent also reports sales but this is manual so I would like to pick up any inaccuracies through reconciliation.
Outside of VBA and Macros, is it possible to get excel to report data sheet by sheet onto one in a continuous order?
View 3 Replies
View Related
Mar 30, 2014
I have a excel workbook, which sheet2 (vehicle arrangement) is master data sheet. which column headings are match with other worksheets. whenever I put the cell value of any multiple rows or column, the cell value (number) and rows (text) are copy or show in the particular sheet which name match with column head.
Sample:
Customer Name
ORDER
MMT
TIL
VBG
JKL
SSL
RDF
ERG
RFG
ERRT
WC
ARS
YUH
TOTAL
M/S XYZ
50
[Code] .......
Worksheets are names as column names is here.. "MMT","TIL", "VBG"........"YUH". So whenever I give the cell value under the column head the same value and corresponding row (customer name) should be show in the particular column head worksheet.
View 9 Replies
View Related
Apr 27, 2007
I have autofilter enabled on the header row across the top of my worksheet.
Is there a quick line of VBA I can use to toggle EACH one to (ALL). This would act as a "Reset" in my spreadsheet and display everything.
View 3 Replies
View Related
Dec 31, 2007
I have the following code based on Multiple user-selected dropdowns. What I need to add is I believe a Volatile Application, where if the user chooses the option "ALL" OR leaves blank (doesn't pick anything from the dropdown,) the respective column does not get Autofilter applied. I have 6 different criteria, including a Start Date and End Date. So, the final result I'm trying to get is to have autofilter applied to only those columns for which the user selected a specific option.
Dim dDate As Date
Dim strDate As String
Dim lDate As Long
Dim rDate As Range
Worksheets("Data").AutoFilterMode = False
Set rDate = Sheets("Summary").Range("B3")
If Not IsDate(rDate) Then 'Check if valid
MsgBox "Non valid date and time"
Exit Sub
End If
View 3 Replies
View Related
Jan 7, 2009
I want to have a cell report the sum of a column and have that sum change depending on which values I have filtered on another column. I have a cell reporting a sum of times in column E, but if I filter Column F to show only jobs for 1/16/09, I want that number to display the total time for just those shown. At this point, it just shows the total regardless of what is filtered.
View 3 Replies
View Related
Apr 16, 2006
You posted this code and it works well
could u advise how to display just the criteria ie no heading, no :, no =, and when it displays the criteria could it fill the cell with a colour. When filter is set to "all" give a blank cell
This would over come lots complaints from operators not realizing that filters are on because they can not find the silly blue button.
Are microsoft aware of is and are they changing it in the new release.
View 9 Replies
View Related
Aug 6, 2006
I attached a small file in which I filtered on Cities. And now I am looking for a VBA to copy the filter to an empty cell. Is this possible?
View 9 Replies
View Related
Jul 12, 2014
I am trying to display a certain number of visible rows, using AutoFilter. My idea is to use a helper column that will 'number' each visible row, but I'm not quite sure what functions to use for this.
View 5 Replies
View Related
Jun 19, 2014
Why auto filter does not show all the records in drop down menu ?
View 2 Replies
View Related
Aug 11, 2009
I have a similar issue, but it's with a date field. Every day, I go in and check the current day to show the current days data(on a Pivot table). Is there a way to modify this code so the AutoFilters update and "check" up to the current day?
View 2 Replies
View Related
May 1, 2007
I have autofilter enabled on the header row across the top of my worksheet. Is there a quick line of VBA I can use to toggle EACH one to (ALL). This would act as a "Reset" in my spreadsheet and display all content. I had a solution that worked, until I made the workbook shared / password protected.
View 3 Replies
View Related
Aug 4, 2006
I need to autofilter across several worksheets and have it look for the same information across all of them, so if I set the autofilter for the 1st spreadsheet, then how do I get Excel to autofilter the rest of the spreadsheets in the workbook or is that possible?
View 6 Replies
View Related
Jun 11, 2014
I am looking to adapt a piece of code (originally created by Ger Plante) so that it autofilters multiple columns of a table. I have three data validated lists that need to search 3 different columns in the table and filter accordingly, but also show all if no hits are made (hence why Ger Plante's code) was perfect in most respects. I would ideally like to keep the code as a Worksheet_Change event, but can deal with it being run as a normal Macro via a button if this is necessary.
[URL]....
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("B1")) Is Nothing Then
Range("A5:C5").AutoFilter Field:=1, Criteria1:=IIf(Trim(Range("B1").Text) = "", "<>", "=") & Range("B1").Text
End If
End Sub
View 3 Replies
View Related
Jul 21, 2014
How can I get the dropdown list to not include blank cells in the list reguardless if the sort filter is used or not.
Sheet 1 (STATS) is the dropdownlist Cell B12
Sheet 2 (Orders) is the data, I cant convert to tables because the cells are active and storted Column B2: is the data named.
so I have to use a formula to do this.
Using Excel 2010
See attached sample
Sample.xlsm
View 7 Replies
View Related
Apr 24, 2007
I have a single workbook with multiple worksheets all using Autofilter.
Is there a simple way i can turn off the autofilter in all worksheets in one go without referencing any particular worksheet?
View 3 Replies
View Related
Jun 13, 2008
I need to Autofilter across many sheets. I have found some examples on doing this such as..
Autofilter Across Multiple Sheets
But I need to take it a step further. Autofilter several Worksheets (skip blank ones - the above link gives code that bombs when it sees a Worksheet with out data.) Then copy those results to a 'summary' page.
So...
1. Autofilter all Worksheets / skip blank ones
2. Show results of all Worksheets on summary page.
View 3 Replies
View Related
May 13, 2014
I often have a table (sometimes formatted as a table, sometimes just data arranged like a table but not formatted as a table in Excel) where I'd like to create individual worksheets (eventually workbooks) based on the information in one of the columns. Take for instance the attached file. I'd like to create a macro to create worksheets (or preferably workbooks) based on data in the Region column. So workbook 1 would be something like North Region Sales 2014, and contain only the data for the North region. Workbook 2 would be something like South Region Sales 2014, and contain only the data for the South region, and so on. Sometimes I might need to create these based off the Region field, another time I might need to do it based off of the Salesperson.
Region Sales 2014.xlsx
To do this currently, I'd use the filter and unselect whichever data I want to keep and then delete all the remaining (visible) rows. When I unfilter, I'm only left with the data I want. This works, but it takes a long time when working with 50 or more "Regions" and large amounts of data.
View 14 Replies
View Related
Aug 19, 2014
I have a workbook that has several sheets in it with various rows of data on each sheet. I would like to have a macro to loop through all the sheets in the workbook and copy and paste the rows into a new summary sheet. The rows to be copied should only have data in Column A, in other words if Column A of a row is blank I want it skipped. Also Row 1 of every sheet contains my headers, and I am only using columns A through M. It needs to be able to copy rows even when autofilter is in use.
View 13 Replies
View Related
Aug 31, 2006
I have a userform with a combobox (cmbSearch) , a textbox (textbox1) and a listbox (listbox1)....and a commandbutton (cmbFind). This userform is used for searching records in my worksheet....where user selects a "Search By" category from the combobox and then enters relevent text search criteria in the textbox....and all the search results are shown in the listbox. This part works fine untill someone tries to search a "non-existent" record. e.g. a customer name thats not in the database and it gives an error. I would incorporate in my code to have a Message box pop up on these type of searches saying "textbox1.value Not Found!" insetad of error message.
Private Sub cmbFind_Click()
Set c = Range("a65536").End(xlUp).Offset(1, 0)
'write userform entries to database
Dim DataSH As Worksheet
Set DataSH = Sheets("ComplaintData")
With DataSH
.Range("L1").Value = cmbSearch.Value
.Range("L2").Value = TextBox1.Text
.Range("N1"). CurrentRegion.Clear
.Range("A1").CurrentRegion. AdvancedFilter Action:=xlFilterCopy, criteriarange:=.Range("L1:L2"), copytorange:=.Range("N1")
End With
lstSearch.RowSource = vbNullString
lstSearch.RowSource = "outdata"
End Sub
View 5 Replies
View Related
Sep 26, 2006
Ive made a worksheet with a userform and ListBox. The listbox is filled with names. If you click on the last button a msgbox with your selected names is displayed. If you select the button without a selection from the listbox a message pop ups to warn that no selection is made. If you select any name afterwards and click on the button the message still pops up unless you select the first entry from the list ("natalie") then the code is right executed. I'm struggeling with the code for several days. I wonder if by any change somebody wants to correct the code. (I've uploaded my sheet)
View 2 Replies
View Related
Sep 27, 2006
The following are on a sheet:
A1 = 5700
B1 = 235
C1 = 17:14
D1 = 5922
$E$1 = 09:01
$F$1= 3
$E$1 and $F$1 are (the only) absolutes/constants.
A2 contains the following:
=IF(A1>D1,B1,IF(A1+B1<D1,"d",IF(AND(C1<$E$1,B1<$F$1),"",B1))))
This translates as:
=IF(5700>5922,235,IF(5700+235<5922,"d",IF(AND(7:14<09:01,235<3),"",235))))
The result is a variable/number (235), "d" or a blank cell ("").
This formula is in a column and works fine where there are numbers in corresponding cells. The problem arises with corresponding cells which appear blank (show no values) but contain references to other cells: they result in a "d" when nothing should be displayed.
So while a corresponding blank cell is correct if it shows no values, it gives me this problem - I don't want "d" or anything.
View 3 Replies
View Related
Oct 9, 2006
I have a spreadsheet where I track income (positive) and expense (negative) items and compare budget to actual amounts. I want to create a simple bar graph comparing budgeted amounts to actual amounts for each item.
However, when I do this, I see all of my income items above the line (pointing up) and all of the expense items below the line (pointing downward).
Is there an option I can select to just use absolute values for the items so they all appear above the line?
View 3 Replies
View Related
Jun 13, 2008
Im trying to add coloumn heads to my listbox but its just not working
i was using rowsource to use the first row of the sheet as the headings however this just set the values in the listbox to the rowsource. Here is my code
If Area = "" Then
Dim c As Range
Zip = "*" + Zip + "*"
Me.ListBox1.Clear
For Each c In Range([e2], [e65000].End(xlUp))
If UCase(c) Like UCase(Zip) Then
With Me.ListBox1
.AddItem c
.List(.ListCount - 1, 0) = c.Offset(0, -4).Value
.List(.ListCount - 1, 1) = c.Offset(0, -3).Value
.List(.ListCount - 1, 2) = c.Offset(0, -2).Value.....................
View 3 Replies
View Related
Oct 16, 2009
I have the following code that lists all the worksheets in workbook. I would like to have this list show only the worksheets that end in "SD". (For example, it would show "MainSD" or "CantonSD" but not "Main".)
View 14 Replies
View Related
Jun 24, 2009
I came across the following macro that generates a list of worksheets with check boxes to select the ones I want to print. I attached the macro to a button on my "Totals" worksheet. When I run the macro, it lets me pick the worksheets, but doesn't print anything unless "Totals" is one of the worksheets I selected in the dialog box. What is missing?
I also want to stop the screen flickering and have it go back to the "Totals" page when it's done since that's where the button is.
View 14 Replies
View Related