I want to get only the amount in a cell that contains date, name, and amount sample:
in A1:A2
1970 Mario Gonzalez $700
1973 Mario Krupa $500
i want only the amount of Gonzalez to be display in b1 (or any cell beside that "Gonzalez" name), and if not Gonzalez then no text to be display.
I have a spread sheet were the area is getting very limited. I need to insert a small icon and when the mouse goes over (like it does in a form tool tip) will show the value of a cell (text value) located in another sheet in same workbook, or I was thinking inset a comment next to the icon and link the comments of the comments text to cell with the text value.
View 14 Replies View RelatedI have a spread sheet were the area is getting very limited. I need to insert a small icon and when the mouse goes over (like it does in a form tool tip) will show the value of a cell (text value) located in another sheet in same workbook, or I was thinking inset a comment next to the icon and link the comments of the comments text to cell with the text value.
I've look the properties of this to objects and can figure it out.
I want to create 3 command buttons (active X) on a worksheet to toggle between showing rows which only contain the below text in column L (range L9:L30) and showing all rows containg the options (However, I also have some blank rows in this range and i always want them to remain hidden.)
My text options are:
High ‚
Medium ՠҪ
Low ’á
The text arrives in the cells via a VLOOKUP
Is the chinese text a problem? i can't type it into VB.
I've been using the following macro to hide and unhide rows with a command button in the same sheet:
Private Sub CommandButton1_Click()
Toggle_Hide_Unhide
End Sub
Sub Toggle_Hide_Unhide()
Dim rngCell As Range
Dim TakeAction As Boolean
If ActiveSheet.CommandButton1.Caption = "Hide" Then
TakeAction = True
ActiveSheet.CommandButton1.Caption = "UnHide"
Else
TakeAction = False
ActiveSheet.CommandButton1.Caption = "Hide"
End If
For Each rngCell In ActiveSheet.Range("I9:I30")
With rngCell
If .Value = 2 Then .EntireRow.Hidden = TakeAction
End With
Next rngCell
End Sub
I am trying to write a function that will compare the text of cell "A2" to the text of cell "B2" and display cell "A2"'s text characters that didnt match from cell "B2" in column C. Can anyone help me out with writing this formula?
EX: ....
I have a excel file that tracks completion rates and has lots of formulas but there is one that I cannot figure out.
I want a formula that will display "not completed in time" (for example) if completion isn't 100% by the planned completion date. The problem I have is that I want to have a record of this and if the completion rate becomes 100% after the planned completion date it will no longer show "not completed in time". Is there a way to setup a formula that will show data in a cell if the formula has EVER met certain criteria.
I have over 2000 cells like the following
S304
S205
S204
S306
S207
and so on
Is there anything I can do to show just the numbers and not the S at the start without me having to delete each S individually?
it is possible to make this in excel?
i make a scroll down and when i select a word show below some text pre defined by me
get my code to work.
I have a sheet with a dropdown box in cell "J1" which is meant as a 'Show only rows containing this value'.
Column Q, from row 3 downward has a pick box which lists the same values as the "J1" drop down box, but uses code to combine whats chosen with commas. An example of what is in a cell in column Q is "SeaHawk, BlackHawk, Squirrel, MRH", where cell J1 would be either "SeaHawk" or "MRH" or something completely different.
I need to only show rows, with text in column Q containing the smae text as J1.
I have a cell (A1) that is referenced to another cell in the workbook ('Sheet1!'B1) by an if statement. I then have another cell that I want the value to show up if there is a value in (A1), If there not a value (Shown in A1). i do not want to show the value. Howeverwith the formula I have. I can delete the (A1) reference value (which shows nothing) and replace if with either a (0 or delete the contents of the cell and it works.
A1=IF('Sheet1'!AF15="","",'Sheet1'!AF15)
B1=IF(AND(A$1>0,E108>0),(D108&E108),"")
I am trying to add the date my charts were created. I have the date the charts were created in a cell then I added a text box to each chart referencing the cell with the date. On some of the charts the date is showing. But on other charts on same sheet, the date only shows when selecting the chart area of the chart but disappears when selecting other charts or cells on the same sheet.
View 6 Replies View Relatedshow a formula as text in another cell
View 5 Replies View Relatedi am using e2k and i have got to filter some data where the filter relevant data is in one column formated as "standard". it contains either only numbers or letters mixed with numbers. in case of a mixed cell the first symbol is always a letter.
i need a way to filter only those rows which contain a mixed cell. the filter criteria should be something like !=#*
I have text in one cell and I need a text box to show the text from that cell.
For example, if I have text in B2, on a text box I put the forumla =B2. The issue I'm experiencing is that the text box cuts off the text. There's no logic to why it cuts off the text, it's not limited to number of characters and I've played about with the margins and wrap texting, etc, all to no avail.
I've attached a photo of the worksheet to show what I'm experiencing. [URL] ..........
how to get cell data / highlight the cell on which mouse hover?
View 6 Replies View RelatedHow can I set a formula to populate a cell if another cell is non-blank? I want a cell to display a number if another cell is not blank.
I'm guessing its an IF formula but I can't get it right.
Im trying to add Cells K2,L2,M2,N2,O2
For instance Column K2 could have the number "2" in it, but in K3 it might be blank.
L2 could have the number 3 in it, but be blak in L3.
M2 could have 50 in it or could be blank.
What I want for P2 to say is 2&3, if the cells in K2 and L2 show the 2 and 3. If it has the 50 in M2 thought, I want it show it.
Lets say cells A1 to A5 contain these lines of information:
Till 174 (T0215) - till keeps turning itself off.
Till 245 - stuck on windows screen
116 - keyboard is unresponsive
Berkel Scale is constantly beeping
ped not reading cards Till 156
How can I show only the numbers from these cells (i.e. B1 will be 174, B2 will be 245 etc...)? As you can see the number isn't always in the same place, and doesnt always have the same characters either side.
In a range of cells (e.g. B26-B40) I have names (first name and second name or first initial and second name). This data is carried from sheet 1 to the second sheet via formula. Some cells may be blank as well.
A VB code to display a message when the user changes the name in any of these cells with data or adds a new name to a cell that is blank, in sheet2
In an open excel file, in the top left-hand corner, the file name is always "Microsoft Excel - Your File Name".
does anyone know how to have the top-left hand corner show "Your File Name" only?
I have created a User Form with required controls to add data in a worksheet and it works fine. Now, I want to retieve data from the hidden worksheet and to view the data in one or two text box controls by clicking a command button placed on the user form. I expect the user to use the user form only.
View 2 Replies View RelatedI have a TextBox and 2 Commandbuttons. I need the cursor to return to the TextBox when the Userform is loaded without the user selecting the TextBox.
View 3 Replies View RelatedI am looking for a piece of code that I can use.
Basically if cell A2 is non blank then I want cell C2 to display My Text. I want to do this for every cell down to about A250.
i need t oknow if i can have text added into 1 cell with having a formula with a answer in it as well,,,i have attached a sheet with better examples of what i mean.
View 3 Replies View RelatedI have a spreadsheet where when cell is clicked, it opens the hyperlink dialogue and allows a user to insert a hyperlink into the cell next to it.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
If Target.Column = 27 And Target.Row > 7 And Target.Row < 401 Then
If Application.Dialogs(xlDialogInsertHyperlink).Show Then
Target.Cut Target.Offset(, 1)
End If
End If
End Sub
So if the cell AA8 is click it allows the user to insert a hyperlink and the hyperlink is pasted in to the cell AB8.
What I need: Is for the cell AA8 to say "Click to Add Hyperlink" and then once a hyperlink is added AB8 to say in the cell "Hyperlink to Folder".
I have a excel workbook, which sheet2 (vehicle arrangement) is master data sheet. which column headings are match with other worksheets. whenever I put the cell value of any multiple rows or column, the cell value (number) and rows (text) are copy or show in the particular sheet which name match with column head.
Sample:
Customer Name
ORDER
MMT
TIL
VBG
JKL
SSL
RDF
ERG
RFG
ERRT
WC
ARS
YUH
TOTAL
M/S XYZ
50
[Code] .......
Worksheets are names as column names is here.. "MMT","TIL", "VBG"........"YUH". So whenever I give the cell value under the column head the same value and corresponding row (customer name) should be show in the particular column head worksheet.
Is it possible to compare code that's in two cells and show the differences? It's possible with Notepad++ and an extension but I have hundreds of pages to examine weekly and it's not efficient to do it manually.
View 1 Replies View RelatedI would like to format a row of cells. I want each cell in the row to contain (and show) both an interger and text. The interger will range in value from one to ~10,000. The text will always be two characters long...but these characters will change from cell to cell.
Elsewhere in the spreadsheet I will have a cell (w/ a formula) that counts the values of the intergers in the row, but ignores the text in each cell.
a procedure for format ing the cells in the row?
I'm trying to do is set up a form load event to initlize some controls. Here is my
Private Sub Form_Load()
'Initialize the form
lblProcessing.Visible = False
txtFileName.Text = "Enter a file name"
End Sub
At the moment, this event is not triggering. I have the code in the code behind my form - should it be in a module? PS: This site is great - it's answered a lot of my other questions so far without me having to make any posts.
I have three columns that each have a drop down of text options; column A has three options, column B has three options and column C has two options. I want to have a fourth column that will show a text value dependent on the combination of the three columns.
It ends up being 18 variations so my IF formula just won't compute.
This is basically the format I have and works for a few values then just chucks up an error when I extend it to all 18 variations:
IF(AND(A1="text",B1="text2",C1="text3"),"show this text",
IF(AND(B1="other",B1="other2",C1="other3"),"then show this", ) etc etc
Any way I can get this to work for all 18 possible outcomes??