I have imported data and numbers from a website and would like to sort the data in numerical order. Excel wants to sort the data 1,10,2,20... in that order. I know from past experience with an older version there was a way to convert the numbers so they can be sorted in the way that I want.
I have a spreadsheet for work that consists of various columns of data. One important sorting column would be Job #. Inside this coulumn are data like 134-Q and 2355-P and 755-P for example. The sort now is like posted. I would like to be able to sort by both alphabetical and numerical order. ie, 755-P, 2355-P, then 134-Q.
I am trying to sort worksheets in excel by numerical order. I have renamed each worksheet with a different zipcode that corresponds to data on that sheet.
I believe there might be two ways to do this, 1) by sorting numerically the worksheet names. 2) by perhaps referencing a cell on each worksheet (i.e. the zipcode) and sorting it that way.
I'm sure this has been asked many times before, but I can't seem to find an answer that works for my data. I have some data that is sorted by an ordered list (like a table of contents from an overly detailed book):
1.0 1.1 1.2 1.2.1 1.3 ... 1.11 ...
This list can be arbitrarily deep (although probably not more than ##.##.##.##), and because I'm using periods to separate the nested levels (can be changed), I've formatted it as text. This means when I sort the data using this column I get 1.11 before 1.2 (text sort order).
After lots of failed formula attempts I've resorted to using an additional column with hand-entered values to sort by so it will sort correctly:
1.00.00 1.01.00 1.02.00 1.02.01 etc
but I'm hoping someone knows a more elegant way to do this, or at least to generate this column without typing so many zeroes!
I am trying to create a Karaoke Song List in excel, which would show four columns on each page with Artist, Track, Artist, Track. I am importing a text file to do this. The problem I have is that I can import the file so that it puts Artist and Track going down, however, it would then need to go back to the top of the page to fill in the right hand side of the current page. Is there any code that retrieves the current print page number of the current cell (so that I can initiate the code to go to the top right of the current page and continue importing)? Or is there a better way of doing this?
I need to be able to enter a number in a cell, A1 for example, activate a button, and have that value placed into a new row below in numerical order, then the entry in A1 deleted so more entries can be made
For example, if F1=6, G1=8 and H1=9, if I enter 7 in A1 and run the macro, a new row is created (G becomes H, H becomes I, etc) and 7 is placed in G1, A1 is cleared.
What I'm up to is inventory where the items are all numbered and more of the same number can show up with a larger number, like XXXX1 and XXXX2 that are the same item, or different item YYYY1 that may only show up once. Row gets deleted when inventory is removed from "back room" and goes to sales area so the list will only carry 40 or so items at any one time.
I'm looking for a formula that will rearrange a row of numbers in numerical order and by their last digit also in a numerical order, I hope it's clear enough !!!
From I51 :R51 are the skips of each digit contain in the combination from C51:G51 meaning that the combination : 7 8 47 51 52 is composed with the digits 1 2 4 5 7 8 those digits have their own column with their skips in it, and I would like starting in cell T51 and dragging to the right the skip of only those digits and in a numerical order.
I have an excel sheet that will create a standard filing system.
in a folder there are folders numbered like this:
"ENQ 0123, ENQ 0124" and go up 1 digit at a time.
there are hundereds in this folder. I would just like to know if there is a quick way of finding the latest one so i can then tell my code to generate the next one.
Is it possible to make excel sort ascending or descending but from mid way through alphabet and then loop through the alphabet again. for example. If Cell A1 had "A" in, it would sort as normal.
Cell A1 = A Cell A2 = B Cell A3 = C Cell A4 = D Cell A5 = E
If Cell A1 had "C" in, it would sort from "C" through the alphabet and then loop to the start of the alphabet as shown below.
Cell A1 = C Cell A2 = D Cell A3 = E Cell A4 = A Cell A5 = B
Excel 2007. At the bottom of a column of data I'm trying to reference the cell $AG4. There are 340 total columns. Each additional column to the right needs to reference the next cell in column AG. So I'm trying to drag and copy horizontally from $AG4 to $AG340. When I try just the single column it just copies $AG4 into everything to the right. When I have to columns ($AG4 and $AG5) and grab both to try to copy horizontally the numbers increasing it just does $AG4, $AG5, $AG4, $AG5, etc.
Trying to arrange numerical values in order from lowest to highest in a column i have a code to do that but i need it to be able to but to a range in the column so it only sorts the values in rows 3 - 60 not all of the rows in the column
Sub Testsort() Range("A3").CurrentRegion.Select Selection.Sort Key1:=Range("A3"), Order1:=xlAscending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _ DataOption1:=xlSortNormal End Sub
I have this massive spreadsheet, with the maximum rows excel will fit on one sheet. In the interest of simplicity, this is what the raw data looks like:
Last First Amount
Jones Jim $1000 Jung Joe $700 White Jon $100 Jones Jim $200 Jones Jan $300 Jung Joe $800 White Jon $200
What I want to do is automatically get excel to group all the same names together. Then I want it to sum all the values for each name, then order by largest total value for each person, then order that by name alphabetically. In other words, the above would look like this after the sort:
Last First Amount Jung Joe $800 Jung Joe $700 Jones Jim $1000 Jones Jim $200 Jones Jan $300 White Jon $200 White Jon $100
Or, if necessary, there could be sum total rows under each name...although I don't have spare rows, so IDK. I could delete some rows if I had to, but would rather not.
I have a list of data with headings number,name, surname,group. Data needs to be kept in the rows as they are now but I would like to sort the order by group. The group order needs to be:
sm, u17m, u15b, u13b, u11b, sw, u17w, u15g, u13g, u11g. I would like to do this using vba and have a blank row between each group.
I have a client with a list of books, and they are trying to sort a column in a sheet that has LC classification codes. When just doing a normal A-Z sort, it looks like this:
What is weird about it is that I would think that the numbers after the RJ would be in numeric order but it seems to be treating them as codes. So, instead of RJ 41, then RJ 45, it goes on with a series of things that start with RJ 41. Is it normal for this to happen, or is there a way to change it so that it goes 41, 45, 47, 48, then 416, 420, etc.
I feel I've searched thoroughly and wasn't able to find the right answer. I've attached a daily report example that needs the "Product" field to be sorted in a particular order. The order should be JEX, Q3791J, YOO5, KLX9, GHT (all similar products need to be grouped together).
Since the report is run daily the number of rows changes daily: one day can have 50 entries and the next 10. Is there a way to dictate the sort order and insert a blank row between each product grouping?
Once the Products have been separated into their groups, how would I sort each grouping by the "Term" column?
I have 2 listbox (List1 and List2). List2 get populated when the user select a value in List1 and based on the value selected in List1. My issues are:
1- Values in list2 are not sorted in ascending order especially when the list2 grows over 32. 2- When the user selects "None" in List1, it should clear List2 (onclick)
I worked on this code for a while with no luck trying to get it to work. Is that doable?
VB:
Option Explicit Dim ufEventsDisabled As Boolean Function SelectedString() As String Const Delimiter As String = "," Dim i As Long
Don't know if macro is better, but I would like to try it with function
I have 2 sheets.
Sheet 1 Column A: Name Column B: Points
Exemple: Name Points Mary 40 Johnny 20 Erick 60 Ralph 30
I want Sheet 2 to get data from Sheet 1 and sort by descending order automatically.
Then it should be
Sheet 2
Name Points Erick 60 Mary 40 Ralph 30 Johnny 20
I don't want to do it manually every time I change some value; I want it to do automatically; so if I change, for example, Erick's points from 60 to 10 in Sheet 1, Erick should appear on the last place in Sheet 2, with his new value (10)
Im totally new to excel and have some data i need to sort. how to sort numbers into ascending order across a row. ie, I have 34 2 45 79 102 63 etc, and I need them to start low and order to high. i have over 1200 rows, so it would be good to do the whole sheet at the same time.
At this time I sort by HOURS then Seniority so the sort would look like this:........
Here is the problem, RN HILLER and JA DOE have the same hours and seniority. It is our policy that when 2 or more names and seniority match, they must be sorted by reverse order first letter of last name.
So this would be correct. H in Hiller comes before D in doe when reverse sorting.....
I have the below code that sorts a list of Doors that I have in row C17 downwards. Door 54, Door 7, Door 109 etc. The list is feeding a drop down box, people find the door they were looking for, in the said drop down box.
Code:
Sub ListSorter() Dim LastRow As Long LastRow = Range("C" & Rows.Count).End(xlUp).row
[Code]....
I wondered if there was some code I could add to the end of this, that would the sort worksheets, which are all named after each cell in the list, in the same order.
I'm using a table with columns from A to F and an unlimited number of rows. Note that there is a title at the top of each column. -I'd like my datas in column F to be automatically sorted in descending order from top to bottom when I hit the enter key or when the number is entered in last column (column F). -the the entire row of data needs to be sorted according to the sorting criteria of column F ( datas entered need to stay on the same row) -the macro should validate that the number value entered in column F is the same as the number value entered in column A. (to make sure that there was no typing mistake) -Result in column D must be the difference between the corresponding value in column B and C (B-C=D) *The next couple of constraints are not absolutely required, i'd like to have them only if it's possible to add constraints with filling color: -Whenever there is no value entered in column C on a specific row I'd like the entire row to be colored in yellow (fill color) -IF a number is entered in column C, and that the result of B-C in column D is not equal to zero, I'd like this specific row to be filled in Red. -when all the values are entered in a row from column A to F and that the result of B minus C is equal to Zero in column D, i'd like this specific row to be filled in a green color. ***in other words, the datas in each rows from column A to F will be entered on 2 occasions; on the first time, only the datas in column A,B and F will be entered (so basically after entering this set of values the row should be filled in yellow. the second time, the remaining values will be added to the rows, so at this time A,B,C,D,E and F will all be entered. when this is done there will be two options 1-the value in column D is equal to Zero then the entire row should be filled in green or 2-the value in column D is'nt equal to zero, then this specific row should be filled in red.
Keep in mind that the datas of a row should be automatically sorted only when the value in column F is entered or when the enter key is hitted to add a new row.