I am trying to sort worksheets in excel by numerical order. I have renamed each worksheet with a different zipcode that corresponds to data on that sheet.
I believe there might be two ways to do this,
1) by sorting numerically the worksheet names.
2) by perhaps referencing a cell on each worksheet (i.e. the zipcode) and sorting it that way.
I have imported data and numbers from a website and would like to sort the data in numerical order. Excel wants to sort the data 1,10,2,20... in that order. I know from past experience with an older version there was a way to convert the numbers so they can be sorted in the way that I want.
View 2 Replies View RelatedI have a spreadsheet for work that consists of various columns of data. One important sorting column would be Job #. Inside this coulumn are data like 134-Q and 2355-P and 755-P for example. The sort now is like posted. I would like to be able to sort by both alphabetical and numerical order. ie, 755-P, 2355-P, then 134-Q.
View 5 Replies View RelatedI am trying to sort different SKU #'s for my amazon store on excel. I go to Data... Sort... Ascending and it comes out like this...
UP1
UP10
UP100
UP101
UP102
UP103
UP104
and so on...
i want it to be like this
UP1
UP2
UP3
UP4
UP5
I have the below code that sorts a list of Doors that I have in row C17 downwards. Door 54, Door 7, Door 109 etc. The list is feeding a drop down box, people find the door they were looking for, in the said drop down box.
Code:
Sub ListSorter()
Dim LastRow As Long
LastRow = Range("C" & Rows.Count).End(xlUp).row
[Code]....
I wondered if there was some code I could add to the end of this, that would the sort worksheets, which are all named after each cell in the list, in the same order.
I found the code below on the Microsoft website and it works except it didn't treat the worksheet tabs as numbers so the sort is 1, 10, 100, 101 etc.
How can I get it to treat the worksheet values like numbers and sort accordingly?.
Code:
Sub Sort_Active_Book()
Dim i As Integer
Dim j As Integer
Dim iAnswer As VbMsgBoxResult
'
' Prompt the user as which direction they wish to
' sort the worksheets.
'
[Code]....
' If the answer is No, then sort in descending order.
'
ElseIf iAnswer = vbNo Then
If UCase$(Sheets(j).Name) < UCase$(Sheets(j + 1).Name) Then
Sheets(j).Move After:=Sheets(j + 1)
End If
End If
Next j
Next i
End Sub
I need to be able to enter a number in a cell, A1 for example, activate a button, and have that value placed into a new row below in numerical order, then the entry in A1 deleted so more entries can be made
For example, if F1=6, G1=8 and H1=9, if I enter 7 in A1 and run the macro, a new row is created (G becomes H, H becomes I, etc) and 7 is placed in G1, A1 is cleared.
What I'm up to is inventory where the items are all numbered and more of the same number can show up with a larger number, like XXXX1 and XXXX2 that are the same item, or different item YYYY1 that may only show up once. Row gets deleted when inventory is removed from "back room" and goes to sales area so the list will only carry 40 or so items at any one time.
I have a column that has something like:
7
5
3
6
4
9
3
11
(continues)
How do I make it to be the order of bigger number to smaller number?
I tried Data > sort Z-A, but then some of the numbers disappear and become "--"
I'm looking for a formula that will rearrange a row of numbers in numerical order and by their last digit also in a numerical order, I hope it's clear enough !!!
ABCDEFGHIJKLMNOPQRSTUVWXYZAAABACADAEAF1
2 1235781114162022273139667197110113128136139153225250328428508576772 3
4 2011025011131712227723113153145225166613657672797812832842850839139 5
From I51 :R51 are the skips of each digit contain in the combination from C51:G51 meaning that the combination : 7 8 47 51 52 is composed with the digits 1 2 4 5 7 8 those digits have their own column with their skips in it, and I would like starting in cell T51 and dragging to the right the skip of only those digits and in a numerical order.
*
D
E
F
[Code].....
I have an excel sheet that will create a standard filing system.
in a folder there are folders numbered like this:
"ENQ 0123, ENQ 0124" and go up 1 digit at a time.
there are hundereds in this folder. I would just like to know if there is a quick way of finding the latest one so i can then tell my code to generate the next one.
I looked at threads realted to printing but wasn ot able to find something similar to what I need. So here is my problem:
I have a file with more than 100 worksheets (each sheet contains the invoice for one store). I would like to create a macro that would enable me to determine the order in which worksheets would be printed. How to do it?
Idea #1: the printing order would be based on the value in cell L1 that would contain the route number for each store. Stores belonging to the same delivery route will have the same value in L1. So, the macro should first print all sheets with 1 in cell L1, then print all sheets with 2 in cell L1 and so on...
Idea #2: Creating a separate data sheet with the list of all stores and their corresponding route number. Let's say info is contained in range A1:B150, where Column A contains the name of the stores and column B contains the route numbers. The macro then should look at that list to determine the printing order of the subsequent worksheets (the name of the store in column A would be the same as the name of the worksheet corresponding to that store).
Idea #3: sorting my 150 worksheets manually. It does not solve my problem fully, though, because stores do not always belong to the same route. So the manual sorting should be carried out daily and would not save time at all.
Is it possible to make excel sort ascending or descending but from mid way through alphabet and then loop through the alphabet again. for example. If Cell A1 had "A" in, it would sort as normal.
Cell A1 = A
Cell A2 = B
Cell A3 = C
Cell A4 = D
Cell A5 = E
If Cell A1 had "C" in, it would sort from "C" through the alphabet and then loop to the start of the alphabet as shown below.
Cell A1 = C
Cell A2 = D
Cell A3 = E
Cell A4 = A
Cell A5 = B
Excel 2007. At the bottom of a column of data I'm trying to reference the cell $AG4. There are 340 total columns. Each additional column to the right needs to reference the next cell in column AG. So I'm trying to drag and copy horizontally from $AG4 to $AG340. When I try just the single column it just copies $AG4 into everything to the right. When I have to columns ($AG4 and $AG5) and grab both to try to copy horizontally the numbers increasing it just does $AG4, $AG5, $AG4, $AG5, etc.
View 2 Replies View RelatedTrying to arrange numerical values in order from lowest to highest in a column i have a code to do that but i need it to be able to but to a range in the column so it only sorts the values in rows 3 - 60 not all of the rows in the column
Sub Testsort()
Range("A3").CurrentRegion.Select
Selection.Sort Key1:=Range("A3"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
End Sub
I have this massive spreadsheet, with the maximum rows excel will fit on one sheet. In the interest of simplicity, this is what the raw data looks like:
Last First Amount
Jones Jim $1000
Jung Joe $700
White Jon $100
Jones Jim $200
Jones Jan $300
Jung Joe $800
White Jon $200
What I want to do is automatically get excel to group all the same names together. Then I want it to sum all the values for each name, then order by largest total value for each person, then order that by name alphabetically. In other words, the above would look like this after the sort:
Last First Amount
Jung Joe $800
Jung Joe $700
Jones Jim $1000
Jones Jim $200
Jones Jan $300
White Jon $200
White Jon $100
Or, if necessary, there could be sum total rows under each name...although I don't have spare rows, so IDK. I could delete some rows if I had to, but would rather not.
As of right now these are the steps i do to sort...i click custom sort choose My data has headers and then i select from the drop down list the word FRNAME.
is there any way i can setup a macro to do this for me? i tried recording the macro but it just is recording me choosing the column FRNAME is in. This does not work for me since FRNAME end up being in different columns all the time but will always be in row 1.
i have A1:A60 filled with numbers. however, they are ordered incorrectly. how can i order then in B1:B60 in the following way?
1st cell
7th cell
13th cell
19th cell
25th cell
31st cell
37th cell
43rd cell
49th cell
55th cell
2nd cell
8th cell
14th cell
20th cell
26th cell
32nd cell
44th cell
50th cell
56th cell
etc.
until the 60th cell
I have read that there is a VBA macro in F11, but I also read that it would only sort the workshhet names, but not the data. I have Excel 2010.
View 2 Replies View RelatedI have a list of data with headings number,name, surname,group. Data needs to be kept in the rows as they are now but I would like to sort the order by group. The group order needs to be:
sm, u17m, u15b, u13b, u11b, sw, u17w, u15g, u13g, u11g. I would like to do this using vba and have a blank row between each group.
I need values from column F in ascending order.
Also I need in column G only the values without formula.
I'm sure this has been asked many times before, but I can't seem to find an answer that works for my data. I have some data that is sorted by an ordered list (like a table of contents from an overly detailed book):
1.0
1.1
1.2
1.2.1
1.3
...
1.11
...
This list can be arbitrarily deep (although probably not more than ##.##.##.##), and because I'm using periods to separate the nested levels (can be changed), I've formatted it as text. This means when I sort the data using this column I get 1.11 before 1.2 (text sort order).
After lots of failed formula attempts I've resorted to using an additional column with hand-entered values to sort by so it will sort correctly:
1.00.00
1.01.00
1.02.00
1.02.01
etc
but I'm hoping someone knows a more elegant way to do this, or at least to generate this column without typing so many zeroes!
I have a client with a list of books, and they are trying to sort a column in a sheet that has LC classification codes. When just doing a normal A-Z sort, it looks like this:
RJ 41 .D53 F54 2005
RJ 416 .L4 C52 1999
RJ 420 .D5T97 2003
RJ 421 .H385 2006
RJ 426 .H43 P43 2005
RJ 431 .M37 2003
RJ 436 .A8 R33 2006
RJ 436 .A8 T498 2001
RJ 436 .A8 T87 2003
RJ 45 .N4 2000
RJ 45 .N418 2006
RJ 45 .R92 1998
RJ 47 .E39 2001
RJ 48 .H37 2000
RJ 48 .H37 2002
RJ 48.2 .C537 2004
RJ 48.2 .P347 2005
RJ 48.2 .P385 2005
RJ 48.2 .R93 2003
RJ 480 .P34 2005
RJ 482 .R48 L448 2004
RJ 486 .C45 2000
What is weird about it is that I would think that the numbers after the RJ would be in numeric order but it seems to be treating them as codes. So, instead of RJ 41, then RJ 45, it goes on with a series of things that start with RJ 41. Is it normal for this to happen, or is there a way to change it so that it goes 41, 45, 47, 48, then 416, 420, etc.
I feel I've searched thoroughly and wasn't able to find the right answer. I've attached a daily report example that needs the "Product" field to be sorted in a particular order. The order should be JEX, Q3791J, YOO5, KLX9, GHT (all similar products need to be grouped together).
Since the report is run daily the number of rows changes daily: one day can have 50 entries and the next 10. Is there a way to dictate the sort order and insert a blank row between each product grouping?
Once the Products have been separated into their groups, how would I sort each grouping by the "Term" column?
I have 2 listbox (List1 and List2). List2 get populated when the user select a value in List1 and based on the value selected in List1. My issues are:
1- Values in list2 are not sorted in ascending order especially when the list2 grows over 32.
2- When the user selects "None" in List1, it should clear List2 (onclick)
I worked on this code for a while with no luck trying to get it to work. Is that doable?
VB:
Option Explicit
Dim ufEventsDisabled As Boolean
Function SelectedString() As String
Const Delimiter As String = ","
Dim i As Long
[Code] .....
Don't know if macro is better, but I would like to try it with function
I have 2 sheets.
Sheet 1
Column A: Name
Column B: Points
Exemple:
Name Points
Mary 40
Johnny 20
Erick 60
Ralph 30
I want Sheet 2 to get data from Sheet 1 and sort by descending order automatically.
Then it should be
Sheet 2
Name Points
Erick 60
Mary 40
Ralph 30
Johnny 20
I don't want to do it manually every time I change some value; I want it to do automatically; so if I change, for example, Erick's points from 60 to 10 in Sheet 1, Erick should appear on the last place in Sheet 2, with his new value (10)
My dates are sorting as per the image below.How do I get them to sort in chronological order (e.g. 01 January, 02 January etc)
Excel Forum.PNG
Im totally new to excel and have some data i need to sort. how to sort numbers into ascending order across a row. ie, I have 34 2 45 79 102 63 etc, and I need them to start low and order to high. i have over 1200 rows, so it would be good to do the whole sheet at the same time.
View 4 Replies View RelatedI have to sort data on 3 criteria
The data is:....
At this time I sort by HOURS then Seniority so the sort would look like this:........
Here is the problem, RN HILLER and JA DOE have the same hours and seniority. It is our policy that when 2 or more names and seniority match, they must be sorted by reverse order first letter of last name.
So this would be correct. H in Hiller comes before D in doe when reverse sorting.....
In the below code, when I want to sort on Column "A" it is not working. Anything stand out that would prevent my code from working?
Sub Delete_Duplicates()Dim LastRow As LongWith Sheets("SAP Raw Extract")
LastRow = .Cells(Rows.Count, "A").End(xlUp).Row 'Create ID Column
.Columns("A:A").Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove .Range("A1") = "ID"
.Range("A2").FormulaR1C1 = "=RC[5]&RC[6]&RC[32]"
[Code] .....