I have a table that is contained within cells B4:D9. I am trying to sort the table from the highest to lowest (column D) everytime the value in G18 or G19 changes. Basically the table changes values everytime there is a change in these two cells. I have attached an example for clarification.
View 14 RepliesI am keeping a spreadsheet for an auction
We have 20 people and each person gets a total bid for 48 items.
if person1 = 55,person2 = 100,person3 = 76,person4 = 67,person5 = 49 etc.
The person's names will be in column C while values in D in cell G3 will hold the total bid for the items each week updating.
What I am trying to do is sort the table (names & values) from cell G3.
So if each week G3 total gets bigger then the table sorts to match.
If the overall total bid after 48 weeks (G3) was 52 then the table sorts with 55 on top (because it's closer) 49 next.
The closer the person's bid to the total bid the further up the table the person will be.
I have uploaded an example with before and after sample.BidExample.xlsx
I have a list in rows where I have a ranking formula =COUNT($G$5:$G$81)-(RANK(G5,$G$5:$G$81)+ COUNTIF($G$5:G5,G5)-1)+1 When I sort the rank, ascending. All of the unique numbers sort ascending, but the non-unique numbers sort descending
ex) 1.751
2.52
3.753
418
417
416
I have a list of parts in a table. I am manually copy/pasting this list to another sheet in my workbook and then using DATA→Remove Duplicates to get a shortened list. Is there a way to automate this process?
In the attached workbook I want the yellow cells to auto-fill for me.
I get a lot of lists in the format on the left hand side so I want excel to automatically format them for me so that I can use the output on the right.
List Sorting Help.xlsx
When you double click on a number in a pivot table data area you get a new sheet with that information showing the detail, is there anyway to "trap" this action?
I want to run a macro on the detail data but can't see a way to do it automatically, have tried, BeforeDoubleClick, PivotTableUpdate, NewSheet events but all have there draw backs if you are doing something other than showing the detail for the pivot table. Of course I can just run the macro after the sheet is made but it would be nice to do it on its own.
I am trying to write a worksheet_selectionchange macro in which the change is initiated only when certain cells are changed (B6:B9 and X9). I do not want the change to be initiated when any other cells on the worksheet change. B6:B9 and X9 are drop down boxes and the values within the drop-down boxes is variable.
View 3 Replies View RelatedI have three worksheets Sheet 1, Sheet 2 and Sheet 3 with three Pivot Tables
Sheet1 - Sheet1Pvt1
Sheet2 - Sheet2Pvt2
Sheet3 - Sheet3Pvt3
When I use In Sheet 2 the following lines of code
Private Sub Worksheet_PivotTableChangeSync(ByVal Target As PivotTable)
Application.EnableEvents = False
Application.ScreenUpdating = False
MsgBox "The pvt table refreshed " & Target.Name
Application.EnableEvents = True
Application.ScreenUpdating = True
End Sub
and even If I Refresh Sheet 3 pivot table, Sheet 2 Event is triggered and it prints "The pvt table refreshed Sheet2Pvt2";
How to restrict the event code only to Sheet 2 and pvttbl Sheet2Pvt2.
I have an Access application with a form containing an Excel chart based on a pivot table based on an Access query based on an Access table which is refreshed every 5 minutes using a Timer event. When the table is refreshed the Excel chart is refreshed. The chart monitors some processes and is active throughout the day. As the day progresses more and more data points are available for plotting on the x-axis. The x-axis labels get very crowded as the day progresses and I need to programmatically change the x-axis scale at various times of the day. To that end I am trying to find an event that is activated at some point during the automatic refresh of the chart/pivot table.
I have tried the Workbook_Change event, the Worksheet_Change event, and the Chart_SeriesChange event. None of these are executed during the refresh process or I have done something wrong in trying to use them. At the moment they only have a MSGBOX message in them so that I can determine if they are even being executed.
How To Make the Table Sort Automatically Without using Sort Button? For Example, I Changed one of the Cell's Value. Then The Table Sort itself.
View 2 Replies View RelatedI have some table with 3 columns: Name, Team, Players with the same name
I want to get to a 2 columns table without using "SORT" or something like that... using only formulas.
Maybe I wasn't so clear so I added a file with my problem.
can i sort a table and exclude the first row from sorting
View 9 Replies View RelatedI've written a fantasy football programme, however i'm having trouble getting the table to auto sort. alter one of the values in the wins tab, then goto the scores tab to see that they don't auto sort.
View 5 Replies View RelatedI am currently in the process of creating a league table using Excel, and was wondering how I could get the teams to automatically arrange themselves in order of total points?, without using macros, is any formula capable of this?
View 9 Replies View Relatedin the attached WB you'll find a Source Table that should be duplicated and in the same time sorted as per the Points. The task should be accomplished with NO VBA, NO Helper Columns and NO Manually Copy+Sort.
Column "H" formula was no problem but I'm stuck with the "G" formulas as you can see in cells G5 and G7. I found it difficult to handle two different names with the same points. What would be the correct formula for column "G" ?
How to autosort table after a row change.
View 1 Replies View RelatedI have a adjusting table which auto sorts based on the latest weeks results.
If one of the results is an N/A (There is no data for the site that week, the table will auto sort this value to the top. How do i get it to move any errors to the button of the table?
I've attached a sample worksheet : Table example.xlsm
I have a spreadsheet with 3 tables (all side-by-side). Table one has 8 rows of data; table two has 2 rows of data; table three has 3 rows of data. I am looking for assistance on how to sort each table in desceding order (by sales). Basically I want to do a sort everytime there is a change of values in any of the tables. I have attached a sample spreadsheet to clarify the table layout and the manner in which the values change within each table.
View 2 Replies View RelatedI have a pivot table and if i select my headers i have the availability to sort a-z and z-a plus manual ...manual says to drag the item where i would like it... I have tried the excel database..they reference manual sort but really give no explanation.
Scenario.. I want to sort a-z.. then manual sort a few items to the top of the list..
I have a table that looks like this:
Code:
TechNum | FirstName | LastName | System | WorkDate | Values
I need the pivot table to look like this:
Code:
-->System
--> TechNum - FirstName LastName
--> WorkDate
I need the sorting to look like this:
Code:
-->System
--> TechNum
--> WorkDate
How do I show the first three fields in the same level of the pivot table and still maintain the sort cascade?
I need to format some information in an Excel file, before exporting it. All the pivot table information I have found online is primarily for account management, using counts and sums. The data is currently in this format:
DEV#WIRE#SWITCH-1A123AMP-1A124AMP-1A125AMP-1A126SWITCH-2A127
I need to sort it into this format in another sheet or another area in the same sheet:
DEV#WIRE#1WIRE#2WIRE#3AMP-1A124A125A126SWITCH-1A123SWITCH-2A127
am working on a spreadsheet that requires sorting a list of names and numbers. The numbers have a sum formula attached. I can set up the macro to sort the list fine by selecting the appropriate cells and creating the macro.
The code for this is below
Sub SurnameSort()
'
' SurnameSort Macro
' Sorts by mechanic surname
'
'
Range("A10:H13").Select
Selection.Sort Key1:=Range("B10"), Order1:=xlAscending, Header:=xlGuess _
, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
End Sub
However, I want the macro to still be able to sort the data when I add new rows to the list later on. In other words, the code above in bold somehow needs to be modified so that "H13" extends as far down as needed.
I have a football pontoon league that works on goals scored, what I am tring to do is to be able to auto-sort the league on the right of the document when I amend the numbers on the table on the left of the document.
View 9 Replies View RelatedSaw quite a few threads on auto sorting but nothing that solves my problem: Sheet 1 has two columns, column A has names and column B has numbers. These numbers are manually entered, and there are duplicate values.
Sheet 2 has to present the same names and numbers in ascending sort order. I cannot use macros due to security restrictions. I can accomplish it using a combination of functions LARGE and INDEX, if the values are not duplicated. But that technique fails when there are duplicate values.
In other words, Sheet 1 has:
NAME VALUE
Bob 5
Joe 2
John 5
Sue 3
and Sheet 2 should auto sort these values and give us:
NAME VALUE
Joe 2
Sue 3
John 5
Bob 5
i am trying to sort a table in Excel 2007. I am getting a syntax error that i don't understand as the arguments for the sort method are optional.
Sub SortTable()
Dim table As ListObject
Set table = ActiveSheet.ListObjects("Table_INDEX")
Dim columnToSortBy As Range
Set columnToSortBy = table.ListColumns(1).Range
With table
.Sort.SortFields.Clear
.Sort.SortFields.Add (columnToSortBy, xlAscending)
With .Sort
. Header = xlYes
.MatchCase = False
.Apply
End With
End With
End Sub
Everyday I've to make Pivot Table from Data given by Branch Manager. When I create Pivot, my Row Label comes in order like
ICV TRUCK
LCV BUS
LCV TRUCK
MCV BUS
MCV TRUCK
PICKUP &
SCV shown in "automaticPivot" sheet in attached file. Later I arrange it in order of
MCV BUS
LCV BUS
MCV TRUCK
ICV TRUCK
LCV TRUCK
PICKUP
SCV by dragging manually everyday shown in "desiredRowLabelSort" sheet.
Is there any way that sort Row Label automatically instead of manually OR any other faster way than doing manually?
I have a list of letting agents that I need to sort into a table to import into Access. The list is dynamic in that not all the fields are present for every record. I will have over 4000 records to sort out, so I would really like to automate this. If possible the macro should read rows from the data worksheet and write to columns and rows on the Table worksheet. I have attached a small example of the data and output required. To make it a little more challenging the column header name is part of the data and will need stripping out as well.
View 3 Replies View RelatedI wonder if someone can tell me if it is possible to sort rows in a pivot table based on a range in the same workbook.
I have the pivot table set up as I need it but the values in the row change each time the macro is run (it is run when new data is added)
As part of the macro a list of Grades is imported into the Workbook. These grades are always imported in the correct order. As such I would like the pivot table to follow the order of imported grade list. The grades in the list will always be the same as the list in the pivot table.
Is this something that would be possible to do?
I'm using a total of 20 Rows and 2 Columns. Each row has Column A for Description and Column B for Score. There are total 10 subjects with 10 noneditable rows, and 10 editable rows.
I'd like to protect column A and B for rows 1 to 10 and unprotect only Column B for rows 11 to 20. When any cells from Column B, rows 11 to 20 updates, I'd like to automatically sort columns A+B for ONLY rows 1 to 10.
Therefore, rows 1 to 10 need to be sorted based on the scores on Column B, and since rows 11 to 20 are just input fields, they are never to be sorted.
Column B for Rows 1-10 will be formulas and are based on Column B values from rows 11-20.
When a value in any of the rows 11-20 of Column B is updated, Range A1:B10 will automatically sort from highest score to lowest score (Column B).
Since Column B for rows 1 to 10 contains formulas and not actual values, would it throw off the order of things when sorting formulas?
the macro coding to perform this task.
Here is just a visual of what the spreadsheet will look like
....A B
=======
1||A (B11)
2||B (B12)
3||C (B13)
4||D (B14)
5||E (B15)
6||F (B16)
7||G (B17)
8||H (B18)
9||I (B19)
10||J (B20)
11||A 10
12||B 9
13||C 8
14||D 7
15||E 6
16||F 5
17||G 4
18||H 3
19||I 2
20||J 1
The Bold are editable fields. and I want to use auto sort A1:B10 based on updated values of B11 to B20.
I have also attached the basic excel file that situates my concern.
I need to put a worksheet together that has multiple columns that I can then sort in order (on any one columns that affects each row together) in "vehicle type".
I want to set it up so the full listing can be sorted top to bottom in colour or then click sort to sort in MAX SIZE and or again sort in SPEED. (So sort in Alpabetical order or by value).
I havent used pivot tables before and assume its the best way. I dont want to use the filter system to sort as its too clumsy for the end user.
sort>sort>sort>sort>VEHICLECOLOURSMAX SIZESPEEDA9brown50100PRONTObrown100110VELICITOgreen200120
SPECIALpurple50155ZEROpink2585GREENVgreen5155MIDEOblack2000135DELVOpurple300155ASPIROblack6155
Create a macro for a soccer table.
image : http://i25.tinypic.com/1tk0na.jpg
sort all characteristics (Win,Draw,Lost and and so forth)
Formulas:
D2 =IF(B9>C9;1)+IF(B11>C11;1)+IF(C13
D3 =IF(C9>B9;1)+IF(C12>B12;1)+IF(C14>B14;1)
D4 =IF(C10>B10;1)+IF(C11>B11;1)+IF(B14>C14;1)
D5 =IF(B12>C12;1)+IF(B10>C10;1)+IF(C13>B13;1)
E2 =IF(B9=C9;1)+IF(B11=C11;1)+IF(C13=B13;1)
E3 =IF(C9=B9;1)+IF(C12=B12;1)+IF(C14=B14;1)
E4 =IF(C10=B10;1)+IF(C11=B11;1)+IF(B14=C14;1)................