I'm using a total of 20 Rows and 2 Columns. Each row has Column A for Description and Column B for Score. There are total 10 subjects with 10 noneditable rows, and 10 editable rows.
I'd like to protect column A and B for rows 1 to 10 and unprotect only Column B for rows 11 to 20. When any cells from Column B, rows 11 to 20 updates, I'd like to automatically sort columns A+B for ONLY rows 1 to 10.
Therefore, rows 1 to 10 need to be sorted based on the scores on Column B, and since rows 11 to 20 are just input fields, they are never to be sorted.
Column B for Rows 1-10 will be formulas and are based on Column B values from rows 11-20.
When a value in any of the rows 11-20 of Column B is updated, Range A1:B10 will automatically sort from highest score to lowest score (Column B).
Since Column B for rows 1 to 10 contains formulas and not actual values, would it throw off the order of things when sorting formulas?
the macro coding to perform this task.
Here is just a visual of what the spreadsheet will look like
1. Is there any way a Cell can automatically be updated? for example:
On Citi Bank worksheet, As soon as a deposit matures, I insert another row and enter new fixed deposit data on "Row 13", but then I have to manually change the references on "Row 4" so that it points to the new "Maturity date" and the "Interest" and the "Current balance".
Is there any way I can automatically update Maturity, Interest rate and Current balance as soon as I enter new deposit information.
2. On the "Fixed Deposit Report" worksheet. Is there any way the list of deposits can automatically sort based on the maturity date as soon as I enter the new deposit information?
I have created a table in Excel 2010 (pls see attached table named post.xlsx).
Then copied the above table into PowerPoint 2010, using "paste link" (I tried to attach the PowerPoint file but the system says "invalid file type" and I cannot attach it).
Question:
I have received income data for another month - the new month is 13 and the corresponding new income is 100. I typed 13 and 100 into the Excel table post.xlsx and thus extended the table by another column.
Then I went back to PowerPoint slide, then right clicked on the table there, then clicked "update link".
Specific Question:
The newly-typed column in Excel table is not get updated in PowerPoint table.
I have a spreadsheet with 3 tables (all side-by-side). Table one has 8 rows of data; table two has 2 rows of data; table three has 3 rows of data. I am looking for assistance on how to sort each table in desceding order (by sales). Basically I want to do a sort everytime there is a change of values in any of the tables. I have attached a sample spreadsheet to clarify the table layout and the manner in which the values change within each table.
I've written a fantasy football programme, however i'm having trouble getting the table to auto sort. alter one of the values in the wins tab, then goto the scores tab to see that they don't auto sort.
I have a adjusting table which auto sorts based on the latest weeks results.
If one of the results is an N/A (There is no data for the site that week, the table will auto sort this value to the top. How do i get it to move any errors to the button of the table?
I've attached a sample worksheet : Table example.xlsm‎
I have a football pontoon league that works on goals scored, what I am tring to do is to be able to auto-sort the league on the right of the document when I amend the numbers on the table on the left of the document.
Saw quite a few threads on auto sorting but nothing that solves my problem: Sheet 1 has two columns, column A has names and column B has numbers. These numbers are manually entered, and there are duplicate values.
Sheet 2 has to present the same names and numbers in ascending sort order. I cannot use macros due to security restrictions. I can accomplish it using a combination of functions LARGE and INDEX, if the values are not duplicated. But that technique fails when there are duplicate values.
In other words, Sheet 1 has:
NAME VALUE Bob 5 Joe 2 John 5 Sue 3
and Sheet 2 should auto sort these values and give us:
My problem this time is in regards to auto sorting a table as data is changed in another worksheet and is auto copied within the said table.
I.E. I need the Fax page (second last), the table has to auto sort based on column " C ". This is easily done using custom sort but can it be done automatically ? I want to lock the page so nobody modifies it.
I attached a copy of my work so far, using Excel 2007.
All the sheets are locked except " Player DATA " and " Fax ".
I have been tasked with coming up with a solution to an excel issue my boss has. I'll try to explain it as simply as I can but it might get confusing.
We have workbooks containing ledgers for a retail establisment. We create a new book for each year. Each book contains a sheet per month. We also have a comparison book/sheet. Currently we have the rolling total for each line item transfer over to the comparison sheet and then manually workout and enter the data for the same day from the previous year. What we would like to do is have the data from 2008 automatically update as we update the 2009 data.
In sheet "Available", I have a list of all shirts available in store. I often make a printable shopping list in sheet "Shopping list". Once the shopping is done, I would like to automatically add the shirts bought to "Available" sheet.
I have a spreadsheet and an Access database that contain the same items and prices. The database and spreadsheet are on a server shared drive. I would like the spreadsheet to automatically update its list of items and prices from the Access database whenever the spreadsheet is opened. Right now, we update the item and price list on both the spreadsheet and the database but I want to just update the database and have the spreadsheet pull the updates from the database.
I have my projection formulas that use the date and age to estimate production on each farm. Basically the age is calculated first and then the production rate is estimated. I have been trying to figure out if, instead of having a formula in each cell, can I use VBA to populate the ages and then the production.
Here is an example:
8/22/2009
FarmAge8/22/09Age8/29/09Age9/5/09Age9/12/09Age9/19/09Age9/26/09Age10/3/09Farm 1 34181351813617937179381793917940177Farm 2 39223402204122042220432204422045218 All the functions I have created work, I just can't have the worksheet auto-calculate due to the total number of cells with functions. Calculating the worksheet takes approx 1 min...
I should be able to adjust any code to the ranges needed, but this example shows the basic layout.
A1 - Header - "Holidays in XXXX' B1 - Header - "Holidays in YYYY' C1 - Header - "Leaves by YOU"
A2:B11 have static dates consisting of 10 dates in each column. C2:C11 - the user may enter any date at any point of time.
I would like to auto-merge the dates in all the 3 columns (A2:C11) in a single column say D2:D31 and then the system should auto-sort the column based on dates in any one order. So as soon as the user enters a value in say cell C2, all the 10+10+1 dates should get sorted.
Also the constraint here is a user may not apply all 10 leaves at in a year. So many of the cells may have blank values.
I have a list in rows where I have a ranking formula =COUNT($G$5:$G$81)-(RANK(G5,$G$5:$G$81)+ COUNTIF($G$5:G5,G5)-1)+1 When I sort the rank, ascending. All of the unique numbers sort ascending, but the non-unique numbers sort descending
I’m just starting to learn the VBA process with Excel, this problem is probably very basic so forgive me.
I have a cell in excel that is linked to a textbox, if you add text to the textbox it will update the cell. If you close and reopen the application you need to click the textbox to show the value previously added to the cell, can this be viewed automatically.
i have a workbook that pulls data from 7 other workbooks based off of 3 criteria. In 6 of the 7 workbooks there are 6 sheets and in the last sheet there are 15sheet. All the sheets are used on different computers and currently the member who use these sheets cant remember to save them so the main workbook can pull the information. So I was hoping for a VB code to do the save for them after they enter any data in the range of A1:J50.
Then for the main work book i was hoping for a VB code to auto update after entering the 3 criteria. I have a marco made but it takes awhile to do it. First it saves the sheet, then pulls the information, then refreshes some pivot table, then populates into the proper cells.
I have a spreadsheet of 30 or so tabs, all of identical layout, with columns B to AS used. Each day I have to drag a row down to collect data from various other spreadsheets, on each of the 30 tabs (different data in each tab, but same format), i.e. today I dragged down B216:AS216 down to B217:AS217 for all 30 tabs. I could record a Macro on the first tab and then play it for the remaining 29, but I have to record the Macro each day so it drags down the next row down.
I am after a Macro that will drag down the columns to the current date (which is in column A and is already entered down to the end of the year) on all tabs, so if I left it for 5 days etc, and then ran the Macro, it will drag down 5 rows. But if I had to run it 5 times that wouldn't matter. A button on the first sheet would be brilliant too, meaning I could open it up, click the button, and then all 30 tabs would drag down to todays date.
I am in charge of a report spreadsheet which gets updated by my users multiple times a day. The spreadsheet is called the R-A-G report (red, amber, green). One of the columns has colours which are updated manually in accordance to the ammount of stock we have in the database (oracle column) and in our warehouse (utl column).
Right now the users update these colours manually, using a key at the bottom of the spreadsheet. My dream is to have these colours auto-updating when a macro is run.
I spent a little time and wrote a very basic macro, but there are a few problems with it. For one i do not think that the macro fills out of the possible variables; therefor it has around 50% accuracy.
I have uploaded the file and would really appreciate if i could get some feedback on how i could write this correctly, maybe some usefull websites specifically directed at elseif (if that is the correct code for me to use).
Ok this is tough to explain but I will try. I am using edate to find data that is older than 2 years old. I have a formula that works. =If(C2<EDATE(TODAY(),-24),B2,""). My issues is that it does not auto-update the data until I have manually changed the date. You can look at my sample. If you change the date or double clik on any "cert date" cell, then my data updates.
I have an add row macro and i need to sum up all of the numbers in a column however when i add a row the sum doesnt update to include the new row. Is there a way to fix this?
I create daily report for dispatch documents to our various branches. Now I am looking for formula (or formula is not possible then VBA code) that will auto update document number and dispatch date in "output" sheet.
I modified an employee schedule that I found on here to meet my needs but I am needing one more thing:
I need a field (or separate worksheet in the workbook) where I can enter employee availability and if they are unavailable for a specific day, it will auto update in the calendar stating they are unavailable for that day.
I want to auto update ( refresh ) an external feed containing odds from Pinnacle Sports website, at 30-60 seconds intervals. Here is the link : [URL] .....
I would also want to apply some formulas to other columns in excel, but mainly I would want to know where is the change in odds. For example if Bayern Munchen has the odds 2, and after the refresh the odds dropped at 1.9 I would want to see the difference in another cell.
I have a quote that has a value in a few cells =IF(B31="","",VLOOKUP(B31,'[Product Supply-1.xlsm]Sheet1'!$B$8:$N$11,13,0)). Though when i make changes in the product supply file i need it to automaticaly update the quote file. Look at thread http://www.excelforum.com/excel-gene...how-value.html to understand the problem. The quote file is there in thread.
i have a list called "parts". i want this list to be updated everytime a new part # is entered into the list cell. i can get it to work in one cell. i have been able to get it to work in up to 6 rows, however i want it to work in up to 50 rows. here is the vba code i am using
Private Sub Worksheet_Change(ByVal Target As Range)
Dim lReply As Long
If Target.Cells.Count > 1 Then Exit Sub If Target.Address >= "$D$3" Then If IsEmpty(Target) Then Exit Sub If WorksheetFunction.CountIf(Range("parts"), Target) = 0 Then lReply = MsgBox("Add " & Target & " to list", vbYesNo + vbQuestion) If lReply = vbYes Then Range("parts").Cells(Range("parts").Rows.Count + 1, 1) = Target End If End If End If End Sub
i am using insert>name>define for the list and this is what i used for that
=OFFSET(lists!$A$1,0,0,COUNtA(lists!$A:$A),1)
like i said, it will work for d1-d6, then it stops working.
