I have a list of dates in a column that I need to sort. Dates in columns are as follows for example:
02/15/2010
05/02/2009
06/11/2033
04/05/2044
When I get do a sort I get the following result (it appears to be sorting by month, day, year)
02/15/2010
04/05/2044
05/02/2009
06/11/2033
I want to sort by year, month, day. Desired result as follows:
05/02/2009
02/15/2010
06/11/2033
04/05/2044
So Column 1 I've got dates, need to sort through that and calculate Year-to-date and Month-to-Date values. These are both Sums of the cells....
YTD = Sum of all cells with most recent yr, in this case 2007
MTD = Sum of all cells in Column B for most recent month, Feb2007 here.
I've listed the desired solution for YTD and MTD on the sheet as well. (I'm guessing the solution will have something to do with SUMPRODUCT?)
In the attached workbook, sorting the dates in column M results in absolutely nothing happening. The dates are formatted as dates (dd/mm/yyyy). The dates in column M are arrived at by adding a number of days (formatted as Number) to another date, the value of which was determined by an array formula. When I retype the actual date into another column and sort that, I get it sorted. Why does the other sort not work? BTW - I actually need to sort column M with column N.
View 2 Replies View RelatedI have an auto generated report that is exported into .csv, my dilemma is that it sorts both the account code and the date in the same column, like this:
9884A B Gerrish Ltd Å“ 577.270577.270
30/09/201231/10/20121865518655277.010277.01MAL/553260
30/09/201231/10/20121884218842264.260264.26MAL/553259
30/11/201231/12/2012195541955436036MEL/549200
so "9884" and "30/09/2012" are in the same column.
Some how i need to turn this information to say the below three invoices are for account 9884, into more of a usuable data like:
9884 A B Gerrish Ltd 30/09/2012 etc etc.
Obviously through out the document this repeats for each account, upto some 1000 accounts.
jas.xlsx‎
I have a pivot table and and struggling to group these by month as well as to sort thee in escending order.
Pivot Table  ABC3Row LabelsSum of DebitSum of Credit
413/02/201334367.1822844.19513/03/201326475.492219.66613/08/201230307.613541.2713/09/2012
18898.0318065.4813/10/2012Â 7210.52913/11/201241969.041767.821013/12/201232844.7724041.26
I'm trying to put cemetery records in a simple, sortable table, names and dates. The problem is that for some entries I have a full date of birth, death, or burial (e.g. 5/12/1892) and for others only a year (e.g. 1892). Is it possible to sort these? All I can get is the just years in order then the full dates at the end. My data look sort of like this:
Smith John 1892 1/1/1940 2/2/1892
Johnson Sarah 3/12/1900 1880 3/10/1900
One thing I don't know is what number format to use (text, long date, short date....) Sometimes the date I type changes after I type it (like 1892 became March 6, 1905) and sometimes it doesn't even though the cell is the same format.
I have a colmun of dates of birth, how do I sort them so that they are in order of the day and not by the year?
View 14 Replies View RelatedIn my pivot table I have "Due Date" with is a column label.
I grouped the dates into weeks by using the "days" grouping and using 7 days.
I created a slicer to allow the user to select with week they want, but the slicer is sorted as though it's a text field and not a date field.
Example:
6/1/2015 - 6/7/2015
6/13/2016 - 6/19/2016
6/15/2015 - 6/21/2015
6/16/2014 - 6/22/2014
I want the slicer to sort by actual date.
What I am trying to do is sum values for each day of the month up to a designated date.
Example:
A1=any date of the month
A2-A31 = 6/1/2012-6/30/2012
B2-B31 = values that correspond to each date
how can i sum the values in column B from the beginning of the month to A1?
Find the sorting method of dates in excel 2010. I have dates in one column and i want to sort it, but I am not able to sort in ascending or descending order.
View 1 Replies View RelatedI have a sheet with a date and the number of months on it which will change. I need the sheet to list the dates in a column for each month automatically: e.g. Two cells contain date “jan07” and the period “10” months. The rows A1 to A10 should have jan07…jan16 listed automatically. If I change then change the number of month to 11 I would like the rows A1 to A11 to update automatically.
View 6 Replies View Relatedlook at the attached file - it was a CSV file. i want to convert the column of dates to say Mar 14 2009 type date. but it only converts some of them.
note some are on the left and some on the right.
I have a sheet named "XYZ Activity" with meeting dates in column B starting with cell B4. There are duplicates in this list, that should only be viewed as one meeting. On another sheet, each company that attends the meeting has a specific join date found in Column C (C4 is the first company start date). I am trying to figure out an equation that will count how many meetings the company could have attended. I already calculate the total meetings they have attended using either of the following equations:
=COUNT(1/FREQUENCY(IF('XYZ Activity'!$C$4:$C$4000=A3,IF('XYZ Activity'!$B$4:$B$4000<>"",'XYZ Activity'!$B$4:$B$4000)),IF('XYZ Activity'!$C$4:$C$4000=A3,IF('XYZ Activity'!$B$4:$B$4000<>"",'XYZ Activity'!$B$4:$B$4000))))
=SUM(IF(FREQUENCY(IF('XYZ Activity'!C$4:C$5000=A4,IF('XYZ Activity'!G$4:G$5000="Yes",MATCH('XYZ Activity'!B$4:B$5000,'XYZ Activity'!B$4:B$5000,0))),ROW('XYZ Activity'!B$4:B$5000)-ROW('XYZ Activity'!B$4)+1),1))
Basically i have 2 tables like the ones below:
Name Rd1Rd2Rd3Rd4Rd5
Zac 8
James 6
John 8
Frank 4
Name Total
Zac
James
John
Frank
Now i want the total column in the second table to update and add the numbers as i update the rounds in the first one Which i can do through SUM or SUBTOTAL. However i want to sort the total column so the highest number is at the top and everytime i do it changes the name column not the total column.
I copy/paste the data from this website [URL] ........
How I can sort all the data based upon the "Date"? The date data is not recognized when I copy/paste.
I have a column which represents by each cell value's number the priority of each row in the table.
What I need to do is create an embedded code that updates the numbers in that column when any value in that column is changed.
For example:
Where the cell values in the column are..
1
2
3
4
5
6
and we change the fifth cell's value to 2
1
2
3
4
2
6
now there are two cells in the column with the same value, we want to keep the value we just changed in the 5th cell but update every other cell that is following the value of 2....
1
3
4
5
2
6
then I would like to resort the table by these new priorities.
similarly if the change is to increase rather than decrease the priority value...where the 3rd cell was increased from 3 ...
1
2
3
4
5
6
changed to 5..
1
2
5
4
5
6
the new change would become...
1
2
5
3
4
6
in this case the 4 becomes 3 and the previous 5 becomes 4 which keeps their relative place in the priority ranking.
I would like this to then resort the table based on this column.
I would like this to execute on the exit of the cell when a cell in the column is changed.
I would like to use the value displayed in column H under the column header after filters have been applied. There will always only be one row displayed after filtering. I'm using Win Xp with Office 2003 ....
View 9 Replies View RelatedI need to sort information in a column containing both numbers and words. In the "asending" & "desending" it only gives two options to choose from. (none) & PartNum.
View 14 Replies View RelatedI have some numbers in a column which due to other cells not yet being filled in are returning a supressed #div/0! error. This is fine, but when i go to sort the column it puts them in the wrong order. I would like to record a macro, and assign it to the column header in order to sort the column.
View 5 Replies View RelatedI am trying to sort a column so it'd be like a schedule the earliest time on top and latest on the bottom. I understand it is a form of custom listing but I am not quite sure what is the way to enter that list entry...attached is my excel spreadsheet I am currently working on.
View 7 Replies View RelatedThis is a simple question but I have been playing around with the syntax(unsuccesssfully) for a while. I want to do is sort a column (not the whole sheet). the column selection being determined by the activecell. I know I can use
View 5 Replies View RelatedI'm trying to merge two or more tables.
The first column of each table is the same field, for example 'Country'. Lets say the first table has information on male population, the second table has information on female population. So i want to merge the tables into one, but here's the problem: table1 has 100 rows (countries), table2 has 96 rows (countries). I need excel to recognise the 4 missing rows of data in table2 and insert blank rows so all the data in table2 corresponds to the correct country in table1 (column1).
Here's a (very) simple example: ...
I currently have a macro that will sort a given column from A1:A5000. The data set can change from A5000 to A6000 or more. How do I edit VBE to accomodate this?
View 6 Replies View RelatedI am trying to sort a range of data by 1 column (column D), and get the following error:
"The sort reference is not valid. Make sure that its within the data you want to sort, and the first Sort By box isnt the same or blank."
Having googled and also checking some previous posts, I thought the issue may be around qualifying my key to ensure that I used the active sheet, but having done this, I still get the error.
CodeRange("A2:V2", Selection.End(xlDown)).Select
ActiveWorkbook.Worksheets("Overview").Sort.SortFields.Clear
ActiveWorkbook.Worksheets("Overview").Sort.SortFields.Add
[Code]....
I have Column A where user inputs data. Whenever a user enters a new value in Column A, I need to copy that data into Column B and then sort the whole column. Any suggestions on how to do this using a macro?
View 9 Replies View Related[data]...
now this is the data i have(theres more but this is just an example), i want to sort it with refrence to 'inv' column such that i hav ....
i am trying to produce a simple work sheet that will sort the positions via one column automaticly with out having to do it manually.
View 2 Replies View Relatedi am looking for formula in my macbook pro excel where i have purchase apple 50kg for $50 and grapes 20 kg for $30 and orange 10kg for $15 and am doing this daily and in end of month i want to see separate kg's and amount for whole month and later year of apple, grapes and orange without sorting it
View 1 Replies View RelatedI've question in sorting: I've 2 column in one datasheet. one contain value of numbers and the other contain names of employes. i want to sort the name of the emplyes by the values that is on the first column.
Anther question is how to make it dynamically so ill not sorting it every time that the values of the first column is changing.
I have Danish Office 2007.
1) Let's say I have 3 columns (horisontal) and many rows (vertical. Each row goes together, as the first column can be text that describes a transaction. The second column will be the amount of money and the third can be something else.
I know how to sort these by whichever column I want to. But the problem is every cell needs to be the same size. And I have merged 3 cells in the first column and only merged 2 cells in the last two colums.
So Excel tells me I cannot merge unless each cell is the same size.
Is there a solution here? I need the 3 cells in the first column, so I have enough room to describe the transaction. And to avoid wasting space, I need to only have the other two columns be the size of two merged cells each.
Example, though with the text in another column:
Picture of it
2) The other problem is that I would like a cell to display the number in red if below zero, green if above zero. I cannot do this. I know where to put in the format codes, but I don't know what to write.
At the same time, I need the cell to show the currency in Danish Kroner. So I need a format code that does this. Someone told me this:
[Blue]dk #.##0;[Red]dk #.##0;[Green]*dk #.##0
But that doesn't work, nor if the color is in danish. What do I do?