Sorting Numbers With #div/0! In Column
I have some numbers in a column which due to other cells not yet being filled in are returning a supressed #div/0! error. This is fine, but when i go to sort the column it puts them in the wrong order. I would like to record a macro, and assign it to the column header in order to sort the column.
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Changing Numbers With Errors: #div/o
When I run a report, for some reason our system imports certain numbers which have errors, as a consequence when I try and do a pivot table I get a lot of returns showing #div/o!. If you look at the spreadsheet the errors start on line 103 sheet 2 and finish on 2631. Sometime the report can be huge and takes a while to go through these manually to convert to numbers.
View Replies!
View Related
Sumproduct Returns #div/0 When #div/0 Is In Data
I'm a big user of sumproduct but i have tried many variations on the following =SUMPRODUCT((R9:R14="Sales Revenue")*(S9:S14)) without success. If the data is clean ie does not contain # div/0 then i can get a fine result. With a #div/0 then the result is #div/0. Can someone please tell me how to exclude #div/0 from the calculation please. I have searched several boards and cannot find an answer, but i'm sure its simple.
View Replies!
View Related
Sorting Numbers Like 1.2.2.3, 12.4.2.3 Etc
I should sort numbers in ascending order from left to right, but the numbers sort only from right to left. This is what I want: 1.3.2.2 1.4.1 2.1.1.1.1 3.2.3.12 3.3.1 And this is how it goes: 2.1.1.1.1 3.3.1 1.4.1 1.3.2.2 3.2.3.12 There are also numbers that have letter at the end (1.2.3a), and the cell format is text.
View Replies!
View Related
Sorting The Numbers
I have three columns that are added together. Depending on where I need them to go, I need three options. For example, E6,E7,&E8 are added up, on E9, I need to be able to direct it to "A @ E10", "B @ E11", or "C @ E12"
View Replies!
View Related
Sorting Text Numbers
I have numbers like this and their sorting wrong. I want to sort in decending order by last digit to the right. How it's sorting now: (sorting by first number sequence) 12/31/05a 12/31/05 11/01/06 10/31/06 I would like it to sort like this: 11/01/06 10/31/06 12/31/05a 12/31/05 These WERE text numbers that were formulated to read like dates. Is there any way to munipulate how to sort? I'm just looking to sort it like it was a date. I get text files in formats like this: 09062006 and I formulated them to read 09/06/06 like it would be a date.
View Replies!
View Related
Sorting A Table By Numbers
I have managed to produce a table which uses formulas to calculate the amount of 'points' someone/a team has accumulated over a period of time however it seems that for some reason or another I cannot sort the table into order of 'who has the most points' PosPlayerPlayedWonDrawLostPoints 1stDean120939 2ndJaymo1239018 3rdMacca1229115 4thRoss1219212 above is the final standings but as you can see the 'sort' function isnt working, and if i do any other sort the name of the person and the points no longer correspond... i.e. it ends up putting the names in alphabetical order and leaving all other columns as they currently are, or it changes the points column, leaving the names in the same place...
View Replies!
View Related
Sorting Numbers With Text
I have a list of 2,000 plus numbers and the list contains numbers and text. When I sort or filter, the only option is sort A to Z (or Z to A), but the result is all of the numbers are sorted, then the numbers with letters are sorted. How can I sort both? I attached a excel example of what I am looking for.
View Replies!
View Related
Sorting Accoiunt Numbers
I have a spreadsheet with three Columns. Column A contains Account numbers that are both Numeric & AlphaNumeric for eg 3000, 3001A, 4001, 4501D. I need VBA code that will forst sort the Numeric accounts 3000, 3001, 3002 etc and then then AlphaNumeric Codes 3001A, 3002B, 4501D etc
View Replies!
View Related
Sorting Repeat Numbers
I'm trying to develop this formula for days now. how can I not list repeated nums from a array example: 675 863 765 982 856 no repeat nums: 675, 863, 982, 856 as 765 was repeat of 675 it should not be used. keep in mind same goes of 3-4-5... repeats,
View Replies!
View Related
Sorting Alphanumeric Part Numbers
I have a fairly large list (1200 rows) of part numbers that I would like to sort. The part number has text and numbers, with a number in the middle. I need excel to ignore this middle number when sorting (but not any of the other numbers). Excel currently sorts like this: MKDSN 1,5/ 3 MKDSN 1,5/ 3-5,08 MKDSN 1,5/ 4 MKDSN 1,5/14-5,08 when I want it to sort like this: MKDSN 1,5/ 3 MKDSN 1,5/ 4 MKDSN 1,5/ 3-5,08 MKDSN 1,5/14-5,08 The first few letters in the part number or the numbers at the end aren't consistant. But it's always the numbers after the "/" and before the "-" (where there is one) that I want to ignore. At the very least I would I need the list in alphabetical order. I don't need the list to be sorted by the "ignored number" at all. Meaning, I would be happy with this result: MKDSN 1,5/ 3 MKDSN 1,5/ 4 MKDSN 1,5/ 2 MKDSN 1,5/14-5,08 MKDSN 1,5/ 3-5,08 MKKDS 2/24 MKKDS 2/20-3,5 MKKDS 2/ 2-3,5 I don't mind getting rid of "/" or spaces or "," in the part number, but I would prefer to not split the part number between two columns. I tried creating a custom list, but there are just too many varieties to list them all.
View Replies!
View Related
Sorting A List Of Numbers By Multiple Columns
I want to sort the list like this: 1) If there is a zero (null) value in all 3 months, these records should be at the bottom sorted by record name (I did not show this field in my file). 2) If there is a non-zero (non-null) value in any of the 3 months, the records will be sorted with each other by total change. Is there a way to do this without me doing sorts multiple times and manually moving rows of data around (which is what I have done to arrive at the list I have attached)? I am not experienced with VBA or Macros, and would prefer a detailed explanation if a solution is using either method.
View Replies!
View Related
Sorting A Column
I have a column which represents by each cell value's number the priority of each row in the table. What I need to do is create an embedded code that updates the numbers in that column when any value in that column is changed. For example: Where the cell values in the column are.. 1 2 3 4 5 6 and we change the fifth cell's value to 2 1 2 3 4 2 6 now there are two cells in the column with the same value, we want to keep the value we just changed in the 5th cell but update every other cell that is following the value of 2.... 1 3 4 5 2 6 then I would like to resort the table by these new priorities. similarly if the change is to increase rather than decrease the priority value...where the 3rd cell was increased from 3 ... 1 2 3 4 5 6 changed to 5.. 1 2 5 4 5 6 the new change would become... 1 2 5 3 4 6 in this case the 4 becomes 3 and the previous 5 becomes 4 which keeps their relative place in the priority ranking. I would like this to then resort the table based on this column. I would like this to execute on the exit of the cell when a cell in the column is changed.
View Replies!
View Related
Sorting Dates In A Column
I have a list of dates in a column that I need to sort. Dates in columns are as follows for example: 02/15/2010 05/02/2009 06/11/2033 04/05/2044 When I get do a sort I get the following result (it appears to be sorting by month, day, year) 02/15/2010 04/05/2044 05/02/2009 06/11/2033 I want to sort by year, month, day. Desired result as follows: 05/02/2009 02/15/2010 06/11/2033 04/05/2044
View Replies!
View Related
Sorting A Single Column
This is a simple question but I have been playing around with the syntax(unsuccesssfully) for a while. I want to do is sort a column (not the whole sheet). the column selection being determined by the activecell. I know I can use
View Replies!
View Related
Multiple Column Sorting
I'm trying to merge two or more tables. The first column of each table is the same field, for example 'Country'. Lets say the first table has information on male population, the second table has information on female population. So i want to merge the tables into one, but here's the problem: table1 has 100 rows (countries), table2 has 96 rows (countries). I need excel to recognise the 4 missing rows of data in table2 and insert blank rows so all the data in table2 corresponds to the correct country in table1 (column1). Here's a (very) simple example: ...
View Replies!
View Related
Letter Color And Column Sorting
I have Danish Office 2007. 1) Let's say I have 3 columns (horisontal) and many rows (vertical. Each row goes together, as the first column can be text that describes a transaction. The second column will be the amount of money and the third can be something else. I know how to sort these by whichever column I want to. But the problem is every cell needs to be the same size. And I have merged 3 cells in the first column and only merged 2 cells in the last two colums. So Excel tells me I cannot merge unless each cell is the same size. Is there a solution here? I need the 3 cells in the first column, so I have enough room to describe the transaction. And to avoid wasting space, I need to only have the other two columns be the size of two merged cells each. Example, though with the text in another column: Picture of it 2) The other problem is that I would like a cell to display the number in red if below zero, green if above zero. I cannot do this. I know where to put in the format codes, but I don't know what to write. At the same time, I need the cell to show the currency in Danish Kroner. So I need a format code that does this. Someone told me this: [Blue]dk #.##0;[Red]dk #.##0;[Green]*dk #.##0 But that doesn't work, nor if the color is in danish. What do I do?
View Replies!
View Related
Macro For Sorting A Single Column
I used the macros found at http://www.contextures.com/xlSort02.html to sort columns. This solution works fine, the invisible rectangle is really good to my interests. Here's how it works: macro #1 creates invisible rectangles at the top of the columns used, at row 1 where the headers are, and assigns a second macro to the rectangles. This second macro sorts the data table based on the column whose rectangle is clicked. The problem is that this solution is for data tables, it sorts the entire table and I want to sort the one, single and only column where I click the invisible rectangle.
View Replies!
View Related
Sorting According To Previous Column Sorts
I need a macro or some idea on how to sort the following numbers (I hope this makes sense!)... The problem is with the zeros get sorted to the top (or even if I have blank cells sorted to the bottom) and I need them to ignore the zeros and sort according to the value in their column but not any other column. However, I need them to be sorted in order from D, C, B, A. A B C D 0000 4000 101000 0540 0050 6660 ie I need them in the following order. A B C D 0000 4000 0540 0050 6660 101000 Therefore they need to sort based on the following columns. This is because I am charting the values in a column clustered chart that need to be in ascending order.
View Replies!
View Related
Sorting Column With Dates Does Not Sort
In the attached workbook, sorting the dates in column M results in absolutely nothing happening. The dates are formatted as dates (dd/mm/yyyy). The dates in column M are arrived at by adding a number of days (formatted as Number) to another date, the value of which was determined by an array formula. When I retype the actual date into another column and sort that, I get it sorted. Why does the other sort not work? BTW - I actually need to sort column M with column N.
View Replies!
View Related
Sorting A Column, But Placing Results In A Different Worksheet
I have a simple one-column section (column A) of values in Sheet1: Column-A Hal Sonny Betty Adam James I would like to sort this, but have the sorted results displayed in Column-A of Sheet2. How can I do this? Note: I need to be able build flexibility into this such that I can add names to the bottom of the list in Sheet1, knowing that the results in Sheet2 will be able to accomodate the additions.
View Replies!
View Related
Custom Sorting A Column By Date....and Text
I need to custom sort a column. I have 3 different types of data in the column. First - multiple dates, Second - "TBA", and Third - "ASAP". What I need is when the column is sorted the "ASAP" rows will be first, the dates (sorted) will be next and finally the "TBA"s. I have been trying to use a custom list.
View Replies!
View Related
Lock In A Title On Column Allowing Sorting
I am trying to create titles for columns. I can do that by just creating them in the cells above the data. The problem is that the titles sort into the data using the sorting feature. When I lock any cells and protect them, the sorting is locked out. Can I use some sort of header over the columns that remains in place where I can still sort the data below, by clicking on the column and sorting?
View Replies!
View Related
Table Sort Results In 1 Column Sorting
In my example file are 4 columns. I placed auto filter to columns B and C. If column B sorted to ascending then this changes formulas in column D. I attached workbook also to understand my problem. If you try to sort column B to ascending you will see the problem in column D
View Replies!
View Related
Column List Sorting Locking 2 Columns Together
This should be a simple question for those who have the knowledge. I am making a 2 column excel page, the first column will have an authors name and the second one will have the book name. I need to lock these two columns together so that author name and book name always stay together (side by side) on the sort command. I need to be able to sort by author or book title and I realize that it gives you the choice to expand the selection, but I can't trust that the others (kids) will realize the importance of doing so. This is going to be a very large list with hyperlinks and I can't afford to chance whether someone else will select the correct command. So a long story short. I want to build a list that can be sorted by author name or book name and be sure that the correct author will always be beside the correct book, but that are able to be independantly sorted
View Replies!
View Related
Sorting! I Have 1 Column W/all The Info. Together. To Make It Into Separate Tables
I have 3 status sheets (about 300+ ea.) that I was given to sort out. Information: 1) Column A: Number of items (i.e. 1 ) 2)Columbe B: Rec'd Date + initials + no. of copies received, followed by notes (i.e. 021709,akb,01) Since there is only one column with all the information together, is there a way to sort the attached sheet by initials? I don't know how to create a formula to pull all the date,mjg's; date,jac's; date,akb's; etc... into a separate table. A: No. of items B: Date,mjg... = Total no. of items C: Date, abk... = Total no. of items D: Date, akb... = Total no. of items
View Replies!
View Related
Sorting Dates Column And Calculating MTD, YTD
So Column 1 I've got dates, need to sort through that and calculate Year-to-date and Month-to-Date values. These are both Sums of the cells.... YTD = Sum of all cells with most recent yr, in this case 2007 MTD = Sum of all cells in Column B for most recent month, Feb2007 here. I've listed the desired solution for YTD and MTD on the sheet as well. (I'm guessing the solution will have something to do with SUMPRODUCT?)
View Replies!
View Related
Extracting Numbers :: Pull Numbers From Another Column
I'm trying to pull some numbers from another column. I want to pull the numbers that have an X separating them like 7X125, 48X192, and 27X90. Example: FA, VF-2000-3-7X125-18-A, AFS FA, VF-2350-48X192-6-RGB, FC FA, VF-2020-27X90-18-A,RFI, FEX, ACP, 2IT
View Replies!
View Related
Show Sum Of Numbers In One Column IF Another Column Has A Specific Category
I have a worksheet which basically tracks time. the time is reported in Column C. In that row in Column E, there is a validation list with about 6 different categories in it. On the side of this "table" I have a list of all the categories and I want a value to be next to it that reports the sum of time (C) for each category (E). So for the "Routing" category, I would want the value to be the sum of just data on the timesheet that have "routing" in Column E.
View Replies!
View Related
Sum Numbers In Column If Date In Other Column Matches
I have a spreadsheet which will be completed by numerous users, with a worksheet reserved for each area. The spreadsheet is to record the number of days lost to training etc on a weekly basis. Each worksheet has 3 columns – column A DESCRIPTION, column B WEEK COMMENCING DATE and column C DAYS LOST. The table will be completed by the manager’s as the info becomes available to them. I will be collating the data on another worksheet and need a formula that will look in column B for all instances of 01/10/07 and then sum the corresponding cells in column C, then do the same for 08/10/07 and so on. I have attached an example of a page. I thought it may be VLookup or Sumif, but I don’t know how to go about it.
View Replies!
View Related
Consolidate Column Of Numbers To New Column With No Zeros
Column A contains numbers 0, 2, 0, 0, 5, 6, 0, 8 (in cells A1 - A8 respectively) Can I write a formula to make column B contain only the non-zero numbers (2, 5, 6, 8 in cells B1 - B4 respectively)?
View Replies!
View Related
Display Just Numbers In A Column.
I have a column with some cells containing just numbers, some cells containing numbers and letters and some cells containing just letters. I would like to know how to display just the cells that contain numbers only, without deleting any of the other cells.
View Replies!
View Related
Sort The Numbers In Column
I have data in column C of rows 25 to 45. The data varies in number form. What i would like to do is have some VBA code that i can place into a macro which will sort the numbers in column C of rows 25 to 45 putting the highest number at the the top (C25). But i need to move the complete row.
View Replies!
View Related
Finding What Numbers Are In One Column But Not The Other
I have a large list of numbers in two columns. I need to know what numbers are in column A but don't appear in column B. For example if the numbers are 1 2 and 3 in column A but column B only has 1 and 2 I need to know that 3 is missing. the only thing I can think of is doing =IF(A1=B1,"TRUE","FALSE") however typing this a thousand times would not be practical. Is there a macro that can check column A against column B and tell me which ones are missing?
View Replies!
View Related
Getting A Sum Of Numbers From A Particular Column.
I would like to Enter in a Catagory Letter (A, B, C, D, or E) in Cell B3, and a starting index number in Cell B4 (the index should range from -3 to 21) and Ending Index Number In Cell B5 (the index should range from -3 to 21). Need to using functions to get excel to display the sum of the values in the appropriate Category column but only between the rows designated by the starting and ending index values. I am very lost and dont know where to start. I have tried a muddle of IF and LOOKUP and SUM functions to no avail.
View Replies!
View Related
#div/0
How do I get excel when using “SUM” and “Average” to disregard cells that have #DIV/0! The reason some cells would have #DIV/0! Is because there maybe no values yet. I still need the sum or average values for those cell that do have data in them
View Replies!
View Related
#div/0!
I should know this but i cant seem to get it. I'm using the following to attampt to "hide" a #DIV/0! error but its not working and i's still getting the error. =IF(e8/f8=0,"",e8/f8)
View Replies!
View Related
Macro With Changing Column Numbers
Is it possible for excel to monitor Row J for a letter "Y". If a "Y" is put into a cell in row J a macro runs. If the "Y" was in column 6 I need the macro to copy A6 B6 C6 D6 E6 F6 etc to other cells on a different worksheet.If "Y" was in column 7 it will copy A7 B7 C7 etc to the same other cells on a different worksheet.
View Replies!
View Related
Formula: Search Through A Column Of Numbers
I would like to be able to search through a column of numbers (say A1=2, A2=4, A3=1, A4=7, A5=5, A6=2, A7=3) and for the formula to list all the possible combinations of cells that add up to a particular number, in this case we will say 7 (i.e. A4 … A1+A2+A3 … A2+A3+A6 … A2+A7 … etc.).
View Replies!
View Related
|
TRACKER
