My data set consists of 10,000 rows and 5,000 columns. I want to search the Used Range and replace all cells which say "NaN" and make them blank.
Any code i currently use takes way too long.
[Code] .....
Trying to repeat a 550 or so character statement with a find/replace however I am getting type mismatch errors. When I use a smaller message in the "replace" it works.
I need it to post a message exactly as long as what I have in there. How do I get it to work?
DoneyOte on this but i have added to the range and im now getting an error that i can't seem to fix
View 12 Replies View RelatedI've been looking around to find something like this for a while and I'm pretty new to VBA, so I haven't figured it out myself yet.
Basically, I need a macro that can take a 7-column range and replace the values in all cells containing 0 (but not 10, 20, etc) with a blank cell so that a count function in another column can function.
When I just select the range and use 'Find and Replace' to remove the 0s, it alters 10s, 20s, 30s, any number that even ends in zero instead of just the value of zero itself,
I have a list that looks like the list on my sample file. You will see ME28A16 at the top and the bottom of the list. I want to fill the Cells inbetween with that value. In my real file It may start ME or it may start PE
Here is the Script that I am using but I can not get it to work:
Dim CurrentRow As Long
Dim LastRow As Long
Dim CurrentText
LastRow = Range("A65000").End(xlUp).Row
For CurrentRow = 1 To LastRow
If InStr(4, Cells(CurrentRow, 4).Value, "M", vbTextCompare) > 0 Or _
InStr(4, Cells(CurrentRow, 4).Value, "P", vbTextCompare) > 0 Then
CurrentText = Cells(CurrentRow, 4).Value
Else
Cells(CurrentRow, 4).Value = CurrentText
End If
Next CurrentRow
I am looking to Find and Replace (via ctr-F) but I need to replace it only within a range of selected cells. Each time I try to do this it replaces everything even though I have tried selecting each cell and replacing only that. Is there a way to select a certain amount of cells and replace?
View 2 Replies View RelatedI would like to be able to replace all cell values in a range of 20c by 20r (i.e. 400 cells). In all cases the condition would be the same (find all cells with a value greater than than zero), but then replace with different values.
e.g. Cells with value >0 in range CX119:DQ138 replace with "NT", then cells with value of >0 in range DR119:EK138 replace with "NU"
I thought you could do it with find and replace by just selecting that range of cells but can't see how to set the conditional >0 bit.
I would like to select cell A6 after pasting a large range so that when send to user the entire range is not selected. I tried
wsDestPage.Range("A6").Select
And
wsDestPage.[a6].Select
I receive
Select method of range class failed
How can I select a single cell after pasting the large range?
the question: i'd like to split a large cell in to smaller, fixed-size cells (columns) by a standard formula.
example: consider cell A1 = 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' i'd like a formula that created B1 = 'ABCDE' C1 = 'FGHIJ' D1 = 'KLMNO', etc
I used =Left (A1, 5) and got A1 = 'ABCDE' easily enough. I'm stumped at coming up with a formula that provides the next 5, and the next 5, etc.
the setup: if you want to know why i really need to solve the question i'm asking rather than using the split cell function:
i have a large set of data from a vendor. ideally, this worksheet will be used for other vendors that submit data similarly.
the script i'm writing takes a specific format--which i can't logically hold the vendors to. so, my specific formatting is on one sheet, referencing the data from each vendor on another sheet.
there is one field of data from vendors that is large ( >4000 characters, typically). however, this field makes my SQL server puke. i need to break this field down in to chunks of 1000 characters, and then re-concatenate after it leaves SQL to its final destination.
because i want to use some script automation to reuse this project, i'm reluctant to just use the split cell function to break up the data. rather i'd like to use whatever data is provided, and referentially split it up in my pre-formatted data.
I want to link a number of cells on one worksheet back to another worksheet within the same workbook. Say everything from Cells A1 to M90.
I find the fastest way to do this link A1 on second worksheet to A1 on first worksheet (by using = and click on worksheet 1 Cell A1).
I then click on cell A1 on worksheet 2, grab small square in bottom right hand side of cell, and drag accross to M1.
While A1 TO M1 is still highlighted, I then grab small square on bottom of cell M1 and drag down to M90.
This makes all cells within this range reference back to worksheet1. In advanced settings I have unchecked for all blank cells to show a zero in woksheet 2.
Therefore I now have what I currently want, although I would like to make all reference absolute?
I tried doing this from the beginning again making A1 absolute at the start, but dragging the cells across and down does not provide the info I am looking for in all cells?
So I was given the task to translate some procedure instructions in an Excel file from English to Spanish. These are very simple instructions and in most cases repetitive throughout the document. There are a lot of instances where the instructions are the same except for a #. They are meant to be modified within the cell as the text that appears in the cell will be printed exactly as it appears.There are several instructions in the cell, it is basically a long continuous string in the cell. My idea is to create a macro that can search that range of cells for the instruction, replace it with the Spanish equivalent while leaving the original English instruction in the cell.
View 6 Replies View RelatedSearch multiple cells for certain string and then replace the text of the entire cell with new text. For example the text may contain:
"A Chestnut Leather Satchel Binocular Case "They'll Fight Over When You're Dead" (Binocularcase-SL-CH)"
I want to search for SL-CH and once that is found I want to replace the contents of the entire cell with the following: Satchel Chestnut (SL-CH)
I need to make sure that splited cells do not replace content of other cells. For example, if A1 has "SDR232, SDR634", this code will split them and put A1 to be "SDR232" and A2 to be "SDR634". BUT what it does is that it actually replaces whatever I have in A2. Is ther anyway to avoid replacing the content of A2?
Sub tst()
Dim X As Variant
X = Split(Range("A1").Value, ",")
Range("A1").Resize(UBound(X) - LBound(X) + 1).Value = Application.Transpose(X)
End Sub
I need some sort of code to check through a selection of cells in a column and make those cells "zero" whose value is equal to the first cell in the selection. e.g., let's say I have a key value entered in cell e6 = "2.99".
E6 F6 G6 H6 I6 J6
2.99 5.25 2.99 2.00 2.99 5.00
So the macro should be able to check the value in cell E6 (i.e. = 2.99) against values in cells from F6: J6 and any cell having the same value as cell E6 (2.99) should be made = 0. So, in the above example cells G6 & I6 will have "0" value after the code has been executed. I have close to 50 rows going down starting from cell E6. For example, E7 has a value which has to be checked against the range starting from F7 to J7 and so on and so forth.
I need to be able to query a large date range by a small beginning and end date range and return a count when the value is = each search criteria. i.e. - Search one year of dates from a table by Beg: 7/23/2012 to End: 10/21/2012 and return a count. The beginning and end dates are dynamic and I will need to reference the cells, i.e. B102 "Beg" B102 "End" and not a static date.
View 7 Replies View RelatedI am trying to replace a range of cells with certain values but I can not figure it out. I'm almost there I think but don't know how to get the varying values I'm looking for. So I have a column (AJ in this instance) that has a bunch of "xx" values at different spots within the column. I want to replace those xx values with numbers 01 through 36. What I have below gets me just about there but it replaces every xx value with 01. How do I get it to go 01 on the first one, 02 on the second one, etc?
/code
Dim cell As Range
For Each cell In Range("AJ1", Cells(Rows.Count, "AJ").End(xlUp))
If cell.Value = "xx" Then _
cell.Value = "01"
Next cell
/code
I am trying to create a macro where it finds a a certain word in a column for example C. What i want it to do is find anything that says FWD_EUR and then replace that cell (e.g C2) with CASH_EUR_FWD and after it has done that it replaces the adjacent cell (e.g. D2) with EUR_FWD. I then want this to do the same with FWD_USD to CASH_USD_FWD and adjacent cell to USD_FWD.
View 2 Replies View RelatedI have a column of numbers in A1:A200 that I need to concatenate with a ";" in between each into one cell. Is there a way to do this without clicking in each cell individually? =concatenate(A1:A200) just returns the value in cell a1.
View 2 Replies View RelatedI have over 16000 cells with different information in them, each cell is unique. There are parts of these cells that have similar information.
I am looking to search part of the cell, and replace the whole cell with my new description, so I can run pivot tables on it.
I have enormous amounts of data to sort through (as we all do) and I am trying to link them to unique identifiers for easier data maintenance later.
What I want to do is vlookup from the 'solved' sheet a code, which will search the 'data' table and return the 'DFU' code.
Example 2905.xlsx
I'm looking for a formula that would tell me if a value in colume E can be found in column M while the values in column M may have characters before and after the value I'm looking for. The values are alpha and numberic in many cases.
Find E2 in M:M where E2 = 0123 and is in M:M as a15012388. The "yes/no" result is marked in red where I would like to have the answer.
Description
Looking For
Yes/No
[Code].....
i have a large set of data and the sumproduct formula i have is extremeley slow ( half the time excel crashes)..plus i will need to be updating this most days!
this is the formula i have in each cell -
=SUMPRODUCT(--($L:$L=Y$3),--($D:$D=$N6),--($F:$F=$O6),($C:$C))
i have tried a sumifs version but it keeps coming up with zero.
would anyone have any help as to how i could get this for formula changed so that it isnt crashing my machine over a large range?
I have inherited an Excel workbook in which the formlas all contain cell names (and there are thousands of names in this book). I need to find a way to change from using cell names in a formula back to a standard absolute cell reference but have no idea how to do this?
View 9 Replies View RelatedThe following code takes a large range of data (currently 20K+ rows) and breaks it out into separate worksheets. This takes a while, and I have been trying to insert a progress bar into this macro, but the progress bar goes in reverse (from 100 to 0) but the userform will not unload at the end.
Sub MoveCells()
Dim objBook As Workbook
Dim objSheet As Worksheet
Dim lngRowSpace As Long
Dim strName As String
Dim lngTimeRow As Long
Dim lngStartRow As Long
Dim lngInteration As Long
Dim strDataSheet As String
Dim boolError As Boolean
Dim counter As Integer
Dim PctDone As Single
Here is the scenario:
A B C D
BananasApplesOrangesTotal113=A1+B1+C1
I need to reference the formula in D1 with the cells headers names.
In a perfect world, it would take
=A1+B1+C1:
and produce:
=Bananas+Apples+Oranges
I have a range of purchase order rows, with the formulas stored in the first row (TemplateRow) which is hidden. The users may add any number of rows to this range, depending upon the number of different products being purchased.
Code:
'Copy the template row into the first newly inserted row
Rows(TemplateRow).Copy Destination:=Rows(insertionPoint)
'fill down from the inserted row down to the last new row
With Rows(InsertionPoint & ":" & NumberOfInsertedRows.Rows.Hidden = False
.FillDownEnd With
The problem is copying the formulas down to the new rows can take terribly long (minutes) in scenarios of thousands of products. Is there a faster method of copying down my formulas?
I have the following formula that is supposed to grab a value from C2 and check for that value in a range of cells and if it matches it is supposed to display the corresponding value in another range of cells. What am I missing??
=IF(C2='Google Doc'!$B1122:$B1266,"'Google Doc!K1122:K1266'","Not OK")
I need to link 153 cells from one workbook to another
Is there a code that can do this ? The cells are not contiguous.
Something like.
If not intersect.....
SetMyrange......
With tartget.Copy.... ??
I'm trying to use the Large function with multiple cells to get the highest value of the cells. Excel won't let me use the following formula.
=large({a1,f1,j1,o1},1)
Any other ways to get the largest value from multiple cells with or without an array.
Is there a way to return not only one cell but two with LARGE?
I'm still working on my top 5 sellers list and trying to generate the list correctly. As of now when I have multiples of the same value I get the same name. Here's what I have now:
Name---Sales
Bob---75
Sue---68
Tim---66
Tim---66
Tim---66
What I'm trying to do is this:
Name---Sales
Bob---75
Sue---68
Tim---66
Jane---66
Dave---66