I need to split the = Now () in Cell Range F1 ( custom format is ddmmyyy) then seperate or split each so,
in Cell Range H1 is dd
in Cell Range I1 is mm
in Cell range J1 is yyyyy
Is this a formula or a macro function ?
I was able to use the information contained, therefore a similar question I had
was not required to be posted twice. This place ROCKS just by reading other posts.
I'm trying to split an amount within a given month:
Customer
From
To
Total number booked
Total amount booked
A
3 March 2013
5 May 2013
458
£5,000
Therefore, assuming that the number and amount booked is done evenly on a daily basis and considering the fact that in March, the period is 3 March - 31 March, while in May it is 1 May - 5 May, is it possible to have a formula that calculates the amount by month?
I have been using =D2/(DAYS360(B2,C2)) to find out the daily number booked, then multiplying this by the days in a given month to find out the monthly value, but is there a more elegant way of doing this where I can define the month in another sheet (Col. B), to return the following in Col. C and D?
Customer
Month
Monthly number booked
Monthly amount booked
A
March 2013
207
£2,258.06
A
April 2013
214
£2,338.71
A
May 2013
30
£322.58
I have a large spreadsheet which holds lots of data with date ranges that i need to performs different actions to. Any way to identify the number of days, per calender month, that falls in a date range.
sample data...
Start Date
End Date
Old Value
New Value
08/03/2010
18/06/2010
16758.2
16758.1
[Code] .......
I need to break down the total number of days per month
Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
Dec
24
30
31
18
[Code] ......
As you can see this also laps into a new year, which poses my next problem, ill probably just add more columns on to the end of the table for that though...
I will later apply different calculations to these cells but in short need to get a calculation for the number of days per month first.
(in short spreading the new value out accross the year then multiplying it by the days... i also need to apply a further daily volume cal to it).
I have a spreadsheet with thousands of dates in this format:
Tuesday 16 September 11am - 4.30pm
What I need to do is split it out so that I end up with a cell with
16.11.08
and another cell with the time string.
I am not sure the best way to go as the day part of the string will be different lengths, as will the other parts, plus I will need to add the year in.
in column A, I have a date like 11.15.2006 .I want to write 11 to column B, 15 to column C and 2006 to column D. How can I manage with VBA?
View 3 Replies View RelatedI have a table column I has format tues 12/04/2014 ect,when I filter to put date in order it seems to use day first and messes the dates up how can I remove day ,tues ect into another column,i get table sent to me so can not tell them to do at source.
View 5 Replies View RelatedI have a spreadsheet with every day of the month where I input quantities of purchased product. We divide those quantities according to the number of days of pricing period.
So if we purchase volume of 100 on the 1st of the month on a 10 days pricing, I would like to have in my spreasheet a volume of 10 for each 10 first days. Easy so far, where I block is when I start having several deals, at different days and with different pricing period.
See attached file for example.
How can I increment my column? Would it be Macro or can I just stick to formulas?
After I imported this data, the date and time is in the same column in the format of "mm/dd/yyyy hh:mm:ss" military time. How do I write a VBA code to split up the date and time into two separate columns. One column would only have "mm/dd/yyyy" while the other only have "hh:mm:ss" in military time.
Eventually, I need to extract information from the data by looking for a specific time. I would also plot time vs something.
I don't know if treating it as a string would work, because it would just become a text rather than a time, right?
In Column A, I have a date formatted as follows: 10/13/2007
I want to break this out into three other columns as follows:
Column B Month = 10
Column B Day = 13
Column B Year = 2007
I need all three columns to be values that I can use in a VLOOKUP.
I was multiplying 2 ranges in an formula to get a cell's value. The first was a set of user inputs and the second was an array of constants. Recently I needed to add another field in the middle of the user inputs which subsequently broke the range.
View 4 Replies View RelatedKindly see mentioned below table, I want to know that how should a macro split range in col a as per its count, if in each box contains qty 500, as result shown in cols d, e, and f which I did manually by writing Level, qty and box#.
View 12 Replies View RelatedWe are an office furniture company and we want to hold a master list of all stock. The columns we require are:
Product ID
Product Description
Product Grade
Product Price
Sold
The Sold column would be a YES or NO answer, and based on that I want the data to split into two additional worksheets, one with all the unsold items and one with all the sold items. So really I need to know how to split the data based on whether the line has a YES or a NO in the sold column.
The data needs to update instantly so if I change a product from unsold to sold it then comes off the current available stock tab.
I just want a macro to split the hours to a date and time in column A. I just preferred macro rather than a formula.
Ex: [Code] .......
Column B1 should be: [Code] ........
I've also attached the file : hours split.xlsm
splitting out date/time strings to separate cells, but I cannot find how to split the following.
I have the serviceable date of an aircraft delivery set as 'S hh:mm dd-mmm-yy', which is due to being used by an external application in this format. This is entered by the user and I need to be able to extract the date time strings and switch them to dd-mmm-yy hh:mm, excluding the S from the result as a formula in another cell.
I keep getting a #value error or returning the whole string result.
I have contarct for amount $5000 with a start date of 1/1/2014 - 3/31/2014 (3 months). I would like to equally split my amount based on my number of months between 1/1/2014 and 3/31/2014 ie $1666.66/per month.
View 4 Replies View RelatedTHE FORMULA - IT FINDS THE LAST-OCCURRING NUMBER IN A ROW, AND ADDS 1 TO IT IF A CELL LOWER DOWN IN THE PRESENT COLUMN CONTAINS TEXT:
Here is a formula to find the previous occurrence of a number in Row 1, and to ADD 1 to it if in the same column (Column Z) as the present cell (Z1), there is NOT a blank in the specified cell (Z5)
=IF(ISBLANK(Z5),"",LOOKUP(10^100,$C1:Y1)+1)
This is quite nifty. Basically if Z5 says "go!"
then Z1 will find the last number in Row 1
- let's imagine F1 contains "300" as the last number so far in Row 1 -
and add 1 to it
- in this case Z1 will thus say "301"
THE NEXT CELL:
With each next cell in Row 1, the formula moves up an increment, except where specifically told to freeze ($). Thus Cell AA1, the next cell in Row 1 after Z1, will have the formula:
=IF(ISBLANK(AA5),"",LOOKUP(10^100,$C1:Z1)+1)
THE PROBLEM:
I don't want to extend Row 1 beyond Column Z. I want my spreadsheet to be more compact. So l want to continue the formula on another row. Let this be Row 43.
So, how do l set the formula to LOOKUP the last-occurring number in Row 1 between Column A - Column Z (i.e. $C1:$Z1) but then - if no number is found in that range - continue the search in Row 43 between Column C - Column F for example (i.e. $C43:F43)?
And how many times can l introduce a new row into the range within which to find the last-occurring number?
How do i split some text in range if it does not have a delimiter? I would like to have a comma after each letter/number or have the option to split to individual cells
I know how to use the vba split function with a delimiter but cant figure this out.
I.e susanna
S,u,s,a,n,n,a.
I've got an Excel document that is generated from a third party programme (See ExcelDoc attached)
I'm trying to manipulate it so that a macro creates a CSV file like the one attached (see THK.csv)
I need to have the following columns in the CSV file populated using the Excel spreadsheet
Column A: Will need to have the NUMBER that is in cell B2 of the Excel file in this case the number is 0714 (need to keep the preceeding 0 too)
Column B: Will need the phone number
Column C: Will need the fax number
Column D: Will need to have the email address
Column E: Will need to have the date only
Column F: Will need to have the Order Number
Column G: Will need to have the Customer name
Column H: Will need to have the Customer telephone number
Column I: Will need to have the Customer alternative telephone number
**Column J: Will need to have the 1st line of the address (after First Address in xls doc)
I've managed to get a macro that will take the information and transpose it into a new document and rename it as an CSV file but I am having a lot of problems trying to get the macro to create the CSV file in the format that I need (see following macro)
Sub CreateCSV1()
Dim wbMyBook As Workbook, iAddPos As Integer
Application. ScreenUpdating = False
Range("B2:B11").Copy
Workbooks.Add
Range("A1").PasteSpecial (xlPasteValues), Transpose:=True
Range("A1") = Left(Range("A1"), InStr(Range("A1"), " ="))
iAddPos = InStr(Range("J1"), "TEGKON:")
I've attached the xls document (the one that is generated and the CSV file which is the format I'm trying to achieve.)
**This cell is generated and will have commas at the end of each line of the address and will be terminated by a period (at line 4 of the address. Sometimes there will be 4 lines to an address but sometimes there may only be 2 or three. In the case where there is no information I need to have a blank ( null) value in the cell
The following code takes a large range of data (currently 20K+ rows) and breaks it out into separate worksheets. This takes a while, and I have been trying to insert a progress bar into this macro, but the progress bar goes in reverse (from 100 to 0) but the userform will not unload at the end.
Sub MoveCells()
Dim objBook As Workbook
Dim objSheet As Worksheet
Dim lngRowSpace As Long
Dim strName As String
Dim lngTimeRow As Long
Dim lngStartRow As Long
Dim lngInteration As Long
Dim strDataSheet As String
Dim boolError As Boolean
Dim counter As Integer
Dim PctDone As Single
I'm trying to separate a cell containing:
TSB w/6.5% NaCl - NS 29002TSB w/6.5% NaCl - NS 29003TSB w/6.5% NaCl - NS 29004
into a 2x3 table, in another sheet, like this:
TSB w/ 6.5% NaCl NS 29002
TSB w/ 6.5% NaCl NS 29003
TSB w/ 6.5% NaCl NS 29004
TSB..... in left column and NS...... in right column. This example includes 3 items as shown above but the single cell could contain more or less than 3 items
I'm using Excel 2000 and I have a spreadsheet with 4 columns (A-D) and many (500+) rows.
Part 1:
#########################################
Colums A & B both contain identical data - a first name and a last name in the format "John Doe".
I want the second word ("Doe") removed from all cells in Column A so that only the first name remains, and I want the first word ("John") to be removed from every cell in Column B so that only the last name remains.
So, where A1 & B1 both started with the data "John Doe" now A1 contains only "John" and B1 contains only "Doe".
#########################################
Part 2:
####################################################
Column C contains addresses in the format:
"#5 - 123 Fake Street, Some City, CA 90210"
There is ALWAYS a comma and a space after the street address, then the name of the city or town followed by more data which may include one or more commas.
I would like everything BEFORE the first comma to remain in column C, and everything AFTER the first comma & space to be moved into Column D of the same row. The first comma and space are not needed again.
So, where C1 started with "#5 - 123 Fake Street, Some City, CA 90210", it now only contains "#5 - 123 Fake Street" and D1 now contains "Some City, CA 90210".
####################################################
I am now trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 1 Replies View RelatedI have a employee travel spreadsheet with air travel dates in two columns. I want to be able to create a rule that will highlight all the cells in a row if the date range on that row fall includes today's date. if someone is traveling in the event there is an emergency and I need to know if they are traveling that particular day. I have attached a sample spreadsheet.
View 3 Replies View RelatedHow do I split numbers!
I have two problems/challenges!
Part I...
I got the answer 1987, and now I want Excel to take the numbers out and display...
1 in one box then i set + in the next, then 9 in the 3ed. box, next box +, then 8, then +, then 7 in the last so that i can have Excel make a SUM of it all to 25.
How do I split 1987 and put the numbers in different boxes?
Part II...
I want to make A=1 B=2... all the way up to 9, then start over again with J=1 K=2... up to 9 again and then over again.
So that if I write my name it comes out as a value of 14 (Odd = O=6 D=4 D=4 =14)
(AJSØ=1 BKTÅ=2 CLU=3 DMV=4 ENW=5 FOX=6 GPY=7 HQZ=8 IRÆ=9, It's the Norwegian alphabet, that's why there are some extra letters)
So how do I set up my Excel so that is ANY name is typed in I can get it out into a number from the values assign?
I need to create formulas that reference a single date and output date ranges. The objective is to have a person input a Monday date in any given month and receive a four weeks out worth of dates and ranges. For example: In a lone cell, the person inputs 10/13/08. Automatically, the sheet produces the next full week range: October 19 – October 25 in a single cell and also produces a cell for each date. Example: Sunday 19, Monday 20, Tuesday 21, etc…. It should look like:
Monday Date:
10/13/08
October 19 – October 25
Sunday 19
Monday 20
Tuesday 21
Wednesday 22
Thursday 23
Friday 24
Saturday 25
and then repeat for three more weeks. I thought I had it figured out until the month changed. The dates continued in October instead of adding a month. This report will be ran weekly, so simply adding a +1MONTH to some cells will not benefit me as I’ll have to change the formula every week. I want the formula to compute the data without any manipulation over the next several years. The only change will be the Monday date.
I have one column with as many as 50,000 or more rows. The data format for each row/ cell is unique as shown below ( date and time). I wanted to split the data as shown in "Formatted Data" below. Have Tried Text To Column formatting but didn't work right.
Raw Data: Formatted Data (2 cells):
2005/11/02 23:55:15.758 ==> 2005/11/02 23:55:15.758
2005/11/02 23:58:16.698 ==> 2005/11/02 23:58:16.698
2005/11/03 00:07:13.830
2005/11/03 00:10:14.971
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
What I need is a formular/vba code that can divide hours into different time ranges. The picture below shows an explanation.
In example 3 there time range analyzed goes from saturday till monday. Here Sunday should get 24 hours and the time range 23-08 for weekdays is at this point 00-08.
I've tried everything I could imagine to get this one working,
I have a table that looks like this (its basically a historical data of a stock exchange):
Date
Index
January 4, 2010
[Code]....
The List continues till the current Date.
I want to calculate Average Index Values of a Date of each month within a Date Range.
Example: Calculate Average Index Values for 3rd of Each month from 1st Feb 2010 to 3rd Jan 2011. Formula should calculate Average of the Index Values for 3rd Feb 2010, 3rd March 2010, 3rd April 2010, 3rd May 2010, 3rd June 2010, 3rd July 2010, 3rd Aug 2010, 3rd Sept 2010, 3rd Oct 2010, 3rd Nov 2010, 3rd Dec 2010, 3rd Jan 2011.
Both the Date and the Date Range is variable. Also, the Index Value for selected Date of one or more month may not be available as that being a holiday. In that case, the formula needs to use the last available Index Value before that Date. e.g. If Index Value for 3rd Oct 2010 is not available, system will use the Index Value of 2nd Oct 2010.
based on user date ranges entered on sheet1, I'm trying to write code that will write each month of the date range on other sheets across the 2nd row. at this point I'm getting "object required" error at "Set DateStart = Cells(2, 6)"
I also want the date format to be mmm-yy (Mar 14) on the sheets even if sheet1 has a different format. I tried using sourcerange instead of DateStart, but that didnt work either.
Code:
Dim projStartDate As Date
Dim projEndDate As Date
Dim DateStart As Date[code]....