I was multiplying 2 ranges in an formula to get a cell's value. The first was a set of user inputs and the second was an array of constants. Recently I needed to add another field in the middle of the user inputs which subsequently broke the range.
View 4 Replies
Kindly see mentioned below table, I want to know that how should a macro split range in col a as per its count, if in each box contains qty 500, as result shown in cols d, e, and f which I did manually by writing Level, qty and box#.
View 12 Replies View RelatedI need to split the = Now () in Cell Range F1 ( custom format is ddmmyyy) then seperate or split each so,
in Cell Range H1 is dd
in Cell Range I1 is mm
in Cell range J1 is yyyyy
Is this a formula or a macro function ?
I was able to use the information contained, therefore a similar question I had
was not required to be posted twice. This place ROCKS just by reading other posts.
THE FORMULA - IT FINDS THE LAST-OCCURRING NUMBER IN A ROW, AND ADDS 1 TO IT IF A CELL LOWER DOWN IN THE PRESENT COLUMN CONTAINS TEXT:
Here is a formula to find the previous occurrence of a number in Row 1, and to ADD 1 to it if in the same column (Column Z) as the present cell (Z1), there is NOT a blank in the specified cell (Z5)
=IF(ISBLANK(Z5),"",LOOKUP(10^100,$C1:Y1)+1)
This is quite nifty. Basically if Z5 says "go!"
then Z1 will find the last number in Row 1
- let's imagine F1 contains "300" as the last number so far in Row 1 -
and add 1 to it
- in this case Z1 will thus say "301"
THE NEXT CELL:
With each next cell in Row 1, the formula moves up an increment, except where specifically told to freeze ($). Thus Cell AA1, the next cell in Row 1 after Z1, will have the formula:
=IF(ISBLANK(AA5),"",LOOKUP(10^100,$C1:Z1)+1)
THE PROBLEM:
I don't want to extend Row 1 beyond Column Z. I want my spreadsheet to be more compact. So l want to continue the formula on another row. Let this be Row 43.
So, how do l set the formula to LOOKUP the last-occurring number in Row 1 between Column A - Column Z (i.e. $C1:$Z1) but then - if no number is found in that range - continue the search in Row 43 between Column C - Column F for example (i.e. $C43:F43)?
And how many times can l introduce a new row into the range within which to find the last-occurring number?
How do i split some text in range if it does not have a delimiter? I would like to have a comma after each letter/number or have the option to split to individual cells
I know how to use the vba split function with a delimiter but cant figure this out.
I.e susanna
S,u,s,a,n,n,a.
I'm trying to split an amount within a given month:
Customer
From
To
Total number booked
Total amount booked
A
3 March 2013
5 May 2013
458
£5,000
Therefore, assuming that the number and amount booked is done evenly on a daily basis and considering the fact that in March, the period is 3 March - 31 March, while in May it is 1 May - 5 May, is it possible to have a formula that calculates the amount by month?
I have been using =D2/(DAYS360(B2,C2)) to find out the daily number booked, then multiplying this by the days in a given month to find out the monthly value, but is there a more elegant way of doing this where I can define the month in another sheet (Col. B), to return the following in Col. C and D?
Customer
Month
Monthly number booked
Monthly amount booked
A
March 2013
207
£2,258.06
A
April 2013
214
£2,338.71
A
May 2013
30
£322.58
I've got an Excel document that is generated from a third party programme (See ExcelDoc attached)
I'm trying to manipulate it so that a macro creates a CSV file like the one attached (see THK.csv)
I need to have the following columns in the CSV file populated using the Excel spreadsheet
Column A: Will need to have the NUMBER that is in cell B2 of the Excel file in this case the number is 0714 (need to keep the preceeding 0 too)
Column B: Will need the phone number
Column C: Will need the fax number
Column D: Will need to have the email address
Column E: Will need to have the date only
Column F: Will need to have the Order Number
Column G: Will need to have the Customer name
Column H: Will need to have the Customer telephone number
Column I: Will need to have the Customer alternative telephone number
**Column J: Will need to have the 1st line of the address (after First Address in xls doc)
I've managed to get a macro that will take the information and transpose it into a new document and rename it as an CSV file but I am having a lot of problems trying to get the macro to create the CSV file in the format that I need (see following macro)
Sub CreateCSV1()
Dim wbMyBook As Workbook, iAddPos As Integer
Application. ScreenUpdating = False
Range("B2:B11").Copy
Workbooks.Add
Range("A1").PasteSpecial (xlPasteValues), Transpose:=True
Range("A1") = Left(Range("A1"), InStr(Range("A1"), " ="))
iAddPos = InStr(Range("J1"), "TEGKON:")
I've attached the xls document (the one that is generated and the CSV file which is the format I'm trying to achieve.)
**This cell is generated and will have commas at the end of each line of the address and will be terminated by a period (at line 4 of the address. Sometimes there will be 4 lines to an address but sometimes there may only be 2 or three. In the case where there is no information I need to have a blank ( null) value in the cell
The following code takes a large range of data (currently 20K+ rows) and breaks it out into separate worksheets. This takes a while, and I have been trying to insert a progress bar into this macro, but the progress bar goes in reverse (from 100 to 0) but the userform will not unload at the end.
Sub MoveCells()
Dim objBook As Workbook
Dim objSheet As Worksheet
Dim lngRowSpace As Long
Dim strName As String
Dim lngTimeRow As Long
Dim lngStartRow As Long
Dim lngInteration As Long
Dim strDataSheet As String
Dim boolError As Boolean
Dim counter As Integer
Dim PctDone As Single
I'm trying to separate a cell containing:
TSB w/6.5% NaCl - NS 29002TSB w/6.5% NaCl - NS 29003TSB w/6.5% NaCl - NS 29004
into a 2x3 table, in another sheet, like this:
TSB w/ 6.5% NaCl NS 29002
TSB w/ 6.5% NaCl NS 29003
TSB w/ 6.5% NaCl NS 29004
TSB..... in left column and NS...... in right column. This example includes 3 items as shown above but the single cell could contain more or less than 3 items
I'm using Excel 2000 and I have a spreadsheet with 4 columns (A-D) and many (500+) rows.
Part 1:
#########################################
Colums A & B both contain identical data - a first name and a last name in the format "John Doe".
I want the second word ("Doe") removed from all cells in Column A so that only the first name remains, and I want the first word ("John") to be removed from every cell in Column B so that only the last name remains.
So, where A1 & B1 both started with the data "John Doe" now A1 contains only "John" and B1 contains only "Doe".
#########################################
Part 2:
####################################################
Column C contains addresses in the format:
"#5 - 123 Fake Street, Some City, CA 90210"
There is ALWAYS a comma and a space after the street address, then the name of the city or town followed by more data which may include one or more commas.
I would like everything BEFORE the first comma to remain in column C, and everything AFTER the first comma & space to be moved into Column D of the same row. The first comma and space are not needed again.
So, where C1 started with "#5 - 123 Fake Street, Some City, CA 90210", it now only contains "#5 - 123 Fake Street" and D1 now contains "Some City, CA 90210".
####################################################
I have a large spreadsheet which holds lots of data with date ranges that i need to performs different actions to. Any way to identify the number of days, per calender month, that falls in a date range.
sample data...
Start Date
End Date
Old Value
New Value
08/03/2010
18/06/2010
16758.2
16758.1
[Code] .......
I need to break down the total number of days per month
Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
Dec
24
30
31
18
[Code] ......
As you can see this also laps into a new year, which poses my next problem, ill probably just add more columns on to the end of the table for that though...
I will later apply different calculations to these cells but in short need to get a calculation for the number of days per month first.
(in short spreading the new value out accross the year then multiplying it by the days... i also need to apply a further daily volume cal to it).
How do I split numbers!
I have two problems/challenges!
Part I...
I got the answer 1987, and now I want Excel to take the numbers out and display...
1 in one box then i set + in the next, then 9 in the 3ed. box, next box +, then 8, then +, then 7 in the last so that i can have Excel make a SUM of it all to 25.
How do I split 1987 and put the numbers in different boxes?
Part II...
I want to make A=1 B=2... all the way up to 9, then start over again with J=1 K=2... up to 9 again and then over again.
So that if I write my name it comes out as a value of 14 (Odd = O=6 D=4 D=4 =14)
(AJSØ=1 BKTÅ=2 CLU=3 DMV=4 ENW=5 FOX=6 GPY=7 HQZ=8 IRÆ=9, It's the Norwegian alphabet, that's why there are some extra letters)
So how do I set up my Excel so that is ANY name is typed in I can get it out into a number from the values assign?
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
What I need is a formular/vba code that can divide hours into different time ranges. The picture below shows an explanation.
In example 3 there time range analyzed goes from saturday till monday. Here Sunday should get 24 hours and the time range 23-08 for weekdays is at this point 00-08.
I've tried everything I could imagine to get this one working,
Here's my problem. I have a cell where there are many data strings seperated by ",". Each data string has a seperate value of its own like for e.g:
A2: aa,ab,ac
String Value
aa 1
ab 1
ac 3
What I want it accomplish is that, split the A2 cell into the different data string entities seperated by ",", then get the corresponding value of each of the data string entity, and to take the average of all the values of the different data string entities.
I have a table like this:
QTY PRODUCT
---------------------
1 AB111
3 CC332
2 DA221
Is there a way to display that information on another sheet so that each individual product is on its own line with a QTY of one? I can do it with VBA but was wondering if there is an alternative?
QTY PRODUCT
---------------------
1 AB111
1 CC332
1 CC332
1 CC332
1 DA221
1 DA221
I have in one column first name space and then surname. I want to divide it into two columns 1 for the first name and 2 for the surname.
View 2 Replies View RelatedI have a very long HTML code that i am using for a description of something on our website, when i save the file in CSV format the HTML gets cut up and put into different cells on different lines ... the file needs to be saved in CSV format.
View 1 Replies View RelatedI need a routine that splits a cell with a name into its various components.
For example: split the name Johnny Jones and place Johnny into a different cell, and place Jones into yet another cell.
QB03654338AGLQLD210/06/2007 0:0014/02/2008 0:00
QB03654338AGLQLD215/02/2008 0:0010/04/2008 0:00
QB03654338AGLQLD219/08/2008 0:0031/12/9999 0:00
to this:
QB03654338AGLQLD210/06/2007 0:0014/02/2008 0:0015/02/2008 0:0010/04/2008 0:0019/08/2008 0:0031/12/9999 0:00
So adding it to all to one line if it is the same ID number "QB03654338". See the attached file.
In column A of a spread sheet I have lots of entries in this format:
admin_staff_a_002
admin_staff_a_006
admin_staff_1_010
admin_staff_1_003
admin_staff_b_005
admin_staff_z_007
admin_staff_z_001
What I need to achieve is to have a different worksheet containing all the rows for admin_staff_a then another for admin_staff_1 etc.
I want to name each of the worksheets a, 1 etc so i'd remove the admin_staff bit and the _003 bit
One of my three active brain cells isnt functioning today, so I need some help.
I am trying to use the "split" function but cant seem to get it working.
The variable sWbName is "MOT 4506667 C 142 #JN #SN.xls".
So I have strings like the one below. What I'm looking for the text behind the ":" being, 17-SEP-2009, 000737-EWO, SRS and finally 002-YAO
Example string:
date: 17-SEP-2009, number:000737-EWO, detail: SRS, DD:002-YAO
My ...
One of the lines in my VBA code reads as follows
View 4 Replies View RelatedI have a list of fixtures but each cell lists the teams in each game ... i.e.
CSKA Moscow v Real Madrid (in one cell)
List example....
CSKA Moscow v Real Madrid (Cell 1)
Leicester v Portsmouth
Leyton Orient v Charlton
Liverpool v Newcastle
Lyon v Apoel Nicosia
Man City v Liverpool
I want to split these cells so CSKA Moscow is in cell B1 and.... Real Madrid is in cell C1 etc.
I have long list of data (asett IDs). All of it is in the following format.
AA-BB-CC-CC001
The number of dash occurrences can vary based on the level the asett is located in. I need to extract the parrent of the asett to adjacent column. the parrent for the above example would be:
AA-BB-CC
The parrent is the values before the last "-". There can be as many as 10 "-"s and as little as 1 in the asett ID.
I have been looking at the split and trim functions in excel but I have not been able to define split/trim by last "-".
I am putting together a macro that takes hours worth of work away by doing all the calculations and splitting.
I have managed to do all the basic stuff but this is a little more complicated.
My spreadsheet has a couple of thousand rows of data, i need the macro to check for the following:-
If DATA14 (Column N) = YES and RATE (Column D) = 21.81
I need this line splitting into two to replace the original. (would be better if i could move the original data to another sheet to show the ones that have been split)
One with 87% of the rate
One with 13% of the rate (Data8 will always = OLHA on this row)
Then the total will be recalculated based on the new rate.
Is there any way to split this string so I get Letter number number number in seperate cells?
|A533|B15A|C025|D205|E240|F036|G450|H166|P210|V123|W60C|X257|X264|Y108|Y233|Y288|Y426|Y428|Y432|
Extract text between two points
Using "Split":
Code:
Public Sub Test1()
Dim oTarget As Range
Dim oCell As Range
Set oTarget = ActiveSheet.Range("A2:A2043")
For Each oCell In oTarget
oCell.Offset(0, 4).Value = Split(Split(oCell.Value, "Date_stamp:")(1), "Payment_made:")(0)
Next oCell
End Sub
I have dumped data from emails into Excel 2010 in cells A2:A2043 and I'm spliting it for ease of viewing but I need the code to check if the cell contains a specific string and if skip to the next cell if it doesn't. For instance when the customer hasn't made a payment it will skip as there isn't anything to split after that point and continue spliting if they answered Yes.
Examples are:
Customer_Number: 11338849
Invoice_Period: 30/06/13
Attendance_type: Group
BookingDate_stamp: 03/07/2013
[code].....
I would have extracted directly from Outlook but that's a different problem for another day at this stage, so I wan't to carry on from where I am. Also, how am I going to extract that last date Can I Split between "Payment_date:" and the end of the cell?
I have the following cells:
A1: the percentage difference between cost1(D1) and cost2(C1)
B1: total product cost (C1+D1)
I need a formula that no matter if the %diff increases or decreases this would reflect in C1 and D1 (so basically C1+D1 would always add to B1 but with the split of % in A1)
