Cell That Is Empty In The Selection, Everything Seems To Stop
Nov 2, 2009
I seem to be lost in some macro-coding... I have this folder with pictures, and I want to display them as comments, by a macro. So far I have control. But then, if there is a picture that is missing, or if there is a cell that is empty in the selection, everything seems to stop.
the macro I use is very simple, but when everything is in place, its working:
Sub pics()
For i = 3 To 50
PicName = "C:UsersEspenPicturesHus" & Cells(i, 1) & ".jpg"
With Cells(i, 1).AddComment
.Shape.Fill.UserPicture PicName
.Shape.Height = 300
.Shape.Width = 400
End With
Next i
End Sub
Is it possible to make the macro run even if there are wholes, or if some pics are not store in the folder yet?
Is it possible to make the area "unlimited", as you see its now limited from 3 To 50.
And is it possible to make this run automatically, kind of checking the folder on its own to see if there is new pics?
View 9 Replies
ADVERTISEMENT
May 11, 2012
I have the following macro
Code:
Sub del()
Dim myRange As Range
Set myRange = Range("AK3:AL3" & Range("AL" & Rows.Count).End(xlUp).Row)
For i = 1 To myRange.Rows.Count
If myRange(i, 1) >= myRange(i, 2) Then
myRange(i, 1) = ""
myRange(i, 2) = ""
End If
Next i
End Sub
How do I add a condition that will stop the macro if myRange = ""/is empty?
View 1 Replies
View Related
Jul 18, 2012
the code below works fine except for the fact that it takes FOREVER to complete as it has to loop through almost 2000 rows... How to optimize this code so the macro stops as soon as it encounters an empty cell? There is currently only 50 entries in the database, but with time it will exceed 1000 entries and therefore i can't simply say Range("H2:H50").
Code:
If OptionButton1.Value = True Then
'Show all Car Cases
Sheets("User-defined Database").Activate
For Each cell In Range("H2:H2000")
[Code]....
View 8 Replies
View Related
Oct 12, 2007
I've set up code where when a cell within a specified range of cells is selected, a macro will run. This works all well and good except for when a whole row, column or range containing the defined cells is selected, there is a run time error. There is no situation where I want multiple cells selected to run the macro, so I only want to run the macro when only a single cell within that range is selected.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Target, Range("GoToRange")) Is Nothing Then
Application.Run "'Macro Test Current MY PFEP Metrics.xls'!PFEP_Filter"
End If
If Not Intersect(Target, Range("GoToRange2")) Is Nothing Then
Application.Run "'Macro Test Current MY PFEP Metrics.xls'!PFEP_Filter"
End If
End Sub
The ranges defined are non-contigious ranges.
View 3 Replies
View Related
Jul 21, 2009
Amongst the several sheets contained in my workbook, there is one called 'Inspection Report'. Users fill in whatever data is required in the other sheets, and once they get to this one, they are supposed to enter a number from 1 to 3 into Cell X1 (which is currently selected) before they select anything else. Unfortunately, I am currently unable to stop them from doing what they should not be doing.
So, I would like to have a notification of some sort pop up into their face if they click or move the selection anywhere else while Cell X1 is still empty. Something like a validation would be nice.
View 6 Replies
View Related
Jul 24, 2009
I wrote some code that toggles bewtweeen the word "Yes" and the function clearcontents.
What it does not do, is if you click on cell A1 and change it's contents and you click on the same cell again it does nothing. You need to click on another cell say A2 before you can go and change A1 again.
My code is as follows:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("Documents")) Is Nothing Then
On Error Resume Next
Application.EnableEvents = False
If IsEmpty(Target) Then
Target.Value = "Yes"
Else
Target.ClearContents
End If
Application.EnableEvents = True
On Error Goto 0
End If
End Sub
View 3 Replies
View Related
Jun 14, 2007
If nothing is typed in and the OK button is pressed, it changes the entire sheet to values. I'd like the macro to stop if nothing is selected.
Dim sCol As String
sCol = InputBox("Select Column")
Set UserRange = Range(sCol & "9:" & sCol & "35")
UserRange.Value = UserRange.Value
View 6 Replies
View Related
Nov 22, 2006
how I can disable an InputBox? I've got some code that whenever someone selects a cell in a specified range, an input box pops up (running a macro) - this can get annoying sometimes though if just browsing. Does anyone know a macro where I can "disable" this?
View 4 Replies
View Related
Aug 17, 2009
I've got a worksheet_selectionchange macro on a sheet, and another macro that you can run after it. The issue is that when the second macro runs, it also runs the selectionchange macro, and wipes some of the info that the second macro should be copying.
Is there a piece of code that I can use in the second macro to block the selectionchance code from running until it's compelte?
View 6 Replies
View Related
Jan 18, 2010
i need a code which looks for empty cells in the selection and puts "');" in the cell above it. If the cells above the empty one already have content that should be deleted and "');" should be pasted there instead. I need to put this symbol combination above all empty cells in my selection.
View 13 Replies
View Related
Dec 23, 2009
I'm having some trouble getting a private sub to initiate and I'm sure it's because I don't have a target specified.
The first part of code puts a checkmark into a cell if it is clicked and that initiates another code called "BUILDER":
Private sub worksheet_selectionchange(ByVal target As Range)
If IsEmpty(target) Then
target.Formula = "=CHAR(252)"
target.Value = target.Value
With target.Font
.Name = "Wingdings"
.FontStyle = "Bold"
.Size = 8
End With.........
View 9 Replies
View Related
Jun 15, 2014
If my cursor is in A1 and I want to select all non-empty cells in that column, what is the VBA code that will do that?
(I'm a beginner and have tried recording a macro and inspecting the code, but that always gives me a specific number of cells to select, while I want it to vary by the number of cells that have values. )
View 8 Replies
View Related
Feb 26, 2009
I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
View 2 Replies
View Related
May 23, 2014
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
View 1 Replies
View Related
May 8, 2014
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
View 5 Replies
View Related
Jan 8, 2008
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
View 9 Replies
View Related
May 30, 2009
Is a Cell with a formula (like shown below) considered true, or is it empty?
=IF(Scorecard!$B$13,Scorecard!$AD$4,"")
If Scorecard!$B$13 was False...
Would a cell with the above formula be considered?
True or Empty?
If Scorecard!$B$13 was True...
A cell with the above formula would be True.
View 9 Replies
View Related
Oct 3, 2006
I tried very hard to design a leave roster for user to mark their leave application. The criteria are as follows:
1. 4 applications per date
2. a region of worksheet (i.e. "A2 to H20) will be defined for users to "click" on the cells (within the defined region) to mark their application.
3. once a cell is clicked (i.e. marked), it cannot be altered.
4. each click will automatically increase the total by 1.
I got the following code to deal with the situation but user can still click on any cell outside the region (in fact I fail to define the region).
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim m
ad = Mid(ActiveCell.Address, 2, 1)
m = Range(ad & 24).Value 'here a formula "CountA(A2,A20)" will be place in the cell (24, c).......................
View 2 Replies
View Related
Mar 20, 2014
IF cell(some cell) empty AND cell(Diferent cell) not empty then Put Formula in empty cell
Next (to go throught the cells because the range constantly changes with every new report)
View 5 Replies
View Related
May 4, 2007
I'm trying to build an investment calculator. Tried searching "calculator" as keyword but return nothing similiar.
There are eight cell : [ A ][ B ][ C ][ D ][ E ][ F ][ G ][h]
[ H ] is price of the leverage
[A] is X balance
[b] is X lot size
[C] is X amount of money use to get x lot
[D] is X percentage of money use to get x lot
[E] is X point gain
[f] is X money gain
[G] is balance + money gain
Ignore the formulae for leverage to determine 1 lot price. Take 1 lot = 250.
What I'm looking for is when I enter any value at cell B, C or D, it will automatically calculate the value for either B, C or D cell.
Let say, the balance is 10000.
If I enter 2 at cell B. Then, it will calculate the value for cell C & D.
If I enter 750 at cell C, then it will calculate value for cell B & D.
If I enter 25 at cell D, it will calculate value for cell B & C.
how to use OR Selection in excel.
View 9 Replies
View Related
Dec 13, 2006
my excel sheet runs through a lot of calculations, opens Flowmaster, a simulations program, passes on data, receivs data and so on. Is there any way to have a user input to stop the whole simulation. During the first tries I had a lot of break point in my debugger. But now I want to have a button to hit or better just some keys to hit to stop it without using the ctrl+alt+del which closes everything.
View 4 Replies
View Related
Oct 25, 2007
When I look at the cell: wsEmpRec.Cells(10,50).Value in the VBA Watch window the value is Empty. I mean, that's the actual word that shows up. I'm trying to test if there is a value in the cell but when I use: if wsEmpRec.Cells(10,50).Value = "" then the condition is not being met. How can I test for an Empty cell as opposed to a cell that contains an empty string?
View 9 Replies
View Related
Apr 21, 2009
What do I need to add to this script in order to stop the macro after the last cell with data. Currently it will continue to add and additional sheet and then error out b/c the next cell is blank and it doesn't know what to enter as the worksheet's name.
For Each c In Sheets("Sheet1").Range("A1:A24")
Sheets.Add
ActiveSheet.Name = Right(c.Value, 30)
Next c
View 9 Replies
View Related
Jan 18, 2013
I am trying to use a macro to check if any cells in a range of cells are less than 0 before proceeding.
VB:
Sub Macro()
If Range("F2:F49") < 0 Then
MsgBox "Please verify column F."
Exit Sub
[Code] ....
View 2 Replies
View Related
Nov 9, 2009
The code down below counts all cells from column A2 to I11. The problem; the code should stop counting if there is a blanc cell in a column and go to the next column to countinue. My query; how should the code be modified so it will stop counting if there is a blanc cell.
View 4 Replies
View Related
Nov 28, 2006
I have a cell with data validation: list, that allows values contained in named range. I want to disallow to delete contents of this cell (with 'del' key, or when i edit cell, delete text and then press 'Enter'). Is it possible to do with formula or VBA
View 4 Replies
View Related
Dec 15, 2006
is there any way to hide the comment box associated with with red triangle in the cell.when mouse is on the cell having comment (red triangle) the yellow colour box should not appear.
View 8 Replies
View Related
Dec 20, 2006
I have a cell that has a formula in it and is also Excel Dates & Times coded. Hence when the repsective cells are empty and there is no values to be calculated the date "00-jan-00" shows. how to prevent this from showing up allowing for a blank cell to only show?
View 4 Replies
View Related
Mar 27, 2007
the following macro works great if there is data below cell O4. but is there isn't any (e.g., at the beginning), then the cursor runs down to 65,536. ?if no data exists, how can i stop at cell O5...
Range("o4").Select
'Range(Selection, Selection.End(xlDown)).Select
Selection.End(xlDown).Select
ActiveCell.Offset(1, 0).Activate
View 2 Replies
View Related
Oct 30, 2013
This is the current layout I have:
Sheet 1: A1:B20, is linked to Sheet 2: A1:B20.
I need to copy and paste data from the internet into Sheet 2, but it's not in the correct order, so I must swap column A and column B in Sheet 2 only. The problem with this is that when I swap them, the linked cells swap as well, which destroys my data on Sheet 1 columns C-Z.
Is there a way that I can keep the cells on Sheet 1 completely static, so that it only reads the data I put into the corresponding cell on Sheet 2?
Or maybe, is there a way I can just swap the cell information in Sheet 2 without messing around with the formatting? Just a complete swap of A1>B1 and B1>A1?
View 4 Replies
View Related
