Sum Average If Same Item Code?
Oct 12, 2012
I have a list of items that are made up of numerous components.
Sales are not set against components, just the item itself. Yet the stock is set against the components and not the item they make up.
Some components appear in more than one item.
What I need is to add the average sales of all components that have the same item number, and then divide the Stock by this total average.
I don't know how to attach a worksheet as I can't install any of the screen shot programs at work.
Picture :
note that this is not the entire list - there are som components that appear in over 100 items.
View 9 Replies
ADVERTISEMENT
Aug 20, 2009
Different items and their respective amounts are entered in the table attached. I neeed a formula to work out the average per week of each item as shown.
View 3 Replies
View Related
Apr 21, 2009
My attached files contains stock returns for companies. Each sheet contains the returns over a 5 year period for a certain stock, with the ticker symbol of the stock used as the sheet name. I want to write a sub that presents the user with a user form. This user form should have an OK and Cancel buttons, and it should have a list box with a list of all stocks. The user should be allowed to choose only one stock in the list. The sub should then display a message box that reports the average monthly return for the selected stock.
View 4 Replies
View Related
Jan 2, 2012
know a macro code to add 3 columns after each different Item.on my spread sheet.
1ABCD
2Item
3111
4111
5111
6111
7111
8111
9112
10112
11112
[code]...
View 5 Replies
View Related
Aug 18, 2006
I think this should be simple to answer. I have a userform that has multiple listboxes on it. When the user makes a selection in Listbox1 it highlights the item selected then when the user makes a selection in Listbox2 it highlights that next item and the selection in listbox1 remains highlighted. What I want is to deselect the selection in Listbox1 when Listbox2 is selected. I have tried things like below:
Sub Listbox2_Click ()
Me.Listbox1.Deselect
End Sub
View 2 Replies
View Related
Sep 5, 2012
I have enclosed a picture of my problem : Diagnostic Notes Generator Example.jpg
The treeview on the left-side panel will populate with different options based on what is chosen from the "category" combo box.
Based on the category chosen, different "troubleshooting steps" will be presented in the Treeview List.
As each selected tree node is mouse clicked...the text values needs to be copied into the adjacent text-box.
My question, what is the code to copy a Treeview item over to a text box?
View 1 Replies
View Related
Apr 25, 2014
I am trying to find an item within an array and then VBA could execute code.
Here is an example:
[Code]....
LookupItems =("text", "value", "book") or should I acutally be using Split("text,value,book",",")
For Each sht in ThisWorkbook
If sht.name = array(LookupItems) Then.....execute code
[Code] ....
So basically in this example I want to loop through all the sheet names in the workbook and if any of the names in the arrary are found it will execute the code for those particular sheet names.
I know alternatives are the select case or write an if statement for each value I am looking up or even use an OR for each value to lookup; but I just wanted to see if this method was even possible as it would be less coding.
View 2 Replies
View Related
Jun 4, 2014
I have a 2 column listbox storing Policy Number and Number of pages. Suppose it has 10 records. Now I want the code so that when I double click on a particular policy number of the listbox then I should be able to make the changes in that. (it might be changing the ppolicy number or number of pages if the user types something wrong by mistake)
View 1 Replies
View Related
Feb 1, 2014
I'm looking for click event code for a list box called lbActiveItemList that finds a match for the selected record in Column 1, to the Sheet ReturnData in Column A from row 6 on (using the G column to find the last row). Upon finding a match it should close the userform, and make the G cell for the matching record the Active Cell.
View 7 Replies
View Related
Nov 20, 2013
I am new to VBA and i need to write a VBA code that should transfer or export any selected thing (whether it may be table, cell or chart ) in Excel Sheet to Powerpoint presentation. My excel Sheet consist of a table and a chart generated from this table.
View 9 Replies
View Related
Jul 16, 2014
I have a price list from my supplier with the new prices.
I then have my Accounting software where I need to update the cost and retail prices. The problem I have is the Accounting software has allocated it`s own Unique ID for each item. So in order for me to bulk import this I need to keep this unique ID with the Actual Product ID together otherwise it will duplicate the product.
Here is a example
Sheet to be updated (Cost and Retail only) from PRICE LIST SHEET
Uneque ID
SKU
[Code].....
View 1 Replies
View Related
Mar 23, 2009
I want to send the value of selected item in texbox , the value format is change by combobox value ..and I want the value is fill on the next column of sheet ( see attached file please)
View 2 Replies
View Related
Oct 12, 2011
I have a dropdown list in C24:C50 (=CategoryList) with data validation and a sub list in D24:D50 (=ItemList) with data validation. I am looking for a way to have code automatically run after selecting an item in the data validation dropdown list in column C.
Example; I click on C24 and make a selection. I what it to trigger code that would move me to D24 and open up the data validation list in D24. After the selection in D24 I would like it to move me back and down 1 row to C25. I have not found anything directly related to this but I have found that code can be run after a selection in a valadition list.
View 2 Replies
View Related
Feb 16, 2013
Excel Userform
VB:
'enables user to click [U]highlight and select[/U] an item in ListBox1 and ListBox2 item (same row in index) is also [U]highlighted[/U] (highlighted only not selected)
Private Sub ListBox1_Click()
ListBox2.ListIndex = ListBox1.ListIndex
End Sub
Question: Is it also possible to enable a user to click to select an item in ListBox1 and ListBox2 item is also selected simultaneously (same row in index). Is there excel vb code to do this?
I think the code may be along the lines of the ListBox SelectedIndex property. What would be the Excel VB code equivilant for the ListBox SelectedIndex property, if so?
View 8 Replies
View Related
Sep 20, 2009
I'm working with Excel 2003 and I desperately need the AVERAGEIF function. Can you give a user defined function for AVERAGEIF.
View 9 Replies
View Related
May 2, 2007
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim rng As Range
Set rng = ActiveCell.CurrentRegion
Application.StatusBar = _
"Current SUM is: " & _
Application.WorksheetFunction.Sum(rng) & " " & _
"Current AVERAGE is: " & _
Application.WorksheetFunction.Average(rng)
End Sub
I now have the following problems:
I get a errot when i select cells with no number
Run-time error 1004
Unable to get Average property of the WorksheetFunction class
The sum and average stay in the status bar.
The code gets confused after i selected different columns.
I would like the code to work only when i select a range of cells.
Is it possible to move the text in the status bar more to the right?
View 9 Replies
View Related
May 20, 2014
numberdesc
1_______yellow
1_______yellow
1_______blue
2_______purple
2_______purple
3_______green
3_______orange
4_______black
I need some way that can identify when the item in the description column doesnt match the first item of the same number- for example, here the 1-blue and 3-orange would be flagged because they should match the 1-yellow and 3-green.
I need to do this on a much larger scale (approximately 20,000 data points), so I wanted to create a formula or macro that could do this for me.. I thought making a reference page with would work but I keep getting an error.. I haven't done VBA in a while, so I may have syntax errors.
If Range("A2:A9").Sheets("Sheet1") = Range("A2:A6").Sheets("Ref") And Range("B2:B9").Sheets("Sheet1") = Range("B2:B6").Sheets("Ref") Then
Range("C2:C9").Sheets("Sheet1") = "x"
End If
View 2 Replies
View Related
Jun 14, 2014
I am getting close to finishing the drop down menu capability when filling in column L in tab Transactions. However, there is a snag. When I enter part of account say "fin" (the important part here is that the part of the word should not be the beginning of the account name) - then I select an account from the menu - but it does not stay in the cell if the part of the name is the beginning of the account name - all is fine.
View 4 Replies
View Related
Sep 30, 2006
I have to make VBA codes to get the average of two ranges. The problem is I always get 0 value. The value of each cells came from the formula that's why I use .TEXT. Here is the code.
iAveragePrep = WorksheetFunction.Average(Range(Cells(275, 4).Text), Cells(275, 5).Text)
View 8 Replies
View Related
Feb 4, 2013
I have this one query though in regards to loops.
I am trying to create a macro that can take the average of the the first 24 cells within a sheet, place the answer onto a cell in the next sheet (e.g. sheet2 in cell A1), then go back to the previous sheet, take the average of the next 24 cells within the sheet and paste the average of this new set in A2. I want to create a loop that will do this 365 times.
I have only managed to create the following code, however its only obtainning the average for the first set of 24 cells starting from B6 in sheet 1. I dont know how to use offsets that well....
VB:
Sub Oval1_Click()
For i = 1 To 365
Sheets("H1 - Riser Turret pressure").Select
Range("B4").Select
ActiveCell.FormulaR1C1 = "=AVERAGE(Sheet1!R[2]C:R[25]C)"
Range("B4").Offset(1, 0).Select
Next i
End Sub
View 6 Replies
View Related
Feb 27, 2014
I have the following code to go through various values in a column and colour code them. However I am facing two issues here:
1. I need to generalize the code such that it runs through column G till column S in different worksheets
2. Few columns between G and S do not have any data and the code is getting stuck at the line below:
myResult = WorksheetFunction.Average(Range("G:G"))
View 1 Replies
View Related
Mar 5, 2014
I need to calculate SUM and AVERAGE of rainfall for each and every year separately and must be displayed separately in a separate column. For your easy understanding, I have done manually and attached the excel sheet.
View 6 Replies
View Related
Apr 15, 2008
I am trying to have the formula =( SUMIF(S2:S125,">0",S2:S125))/(COUNTIF(S2:S125,">0")) Put into cells through vba. What I did to get the formula is typed it into an excel cell to find the average of a group of cells that do contain blank cells. The formula brought out the proper results. So all I did is put the formula into vba and changed the appropriate parts. The range will not be the same of course, but there is what I have.
ActiveCell.Formula = "=(SUMIF(" & ActiveCell.Offset(orow + 2, 0).Address & ":" & ActiveCell.Offset(-1, 0).Address & ","">0""" & "," & ActiveCell.Offset(orow + 2, 0).Address & ":" & ActiveCell.Offset(-1, 0).Address & "))/(COUNTIF(" & ActiveCell.Offset(orow + 2, 0).Address & ":" & ActiveCell.Offset(-1, 0).Address & ","">0""" & "))"
When I show a msgbox for ActiveCell.Formula (Msgbox activecell.formula), it shows me the formula as above - =(SUMIF(S2:S125,">0",S2:S125))/(COUNTIF(S2:S125,">0")) Except instead of the s:ranges, it shows $L2:$L125 (which is correct). The quotes do show up around the criteria in both the sumif and countif. I keep receiving an error. I put a msgbox err.description & ", " err.number dialog in. The error comes up as ", 0" (no quotes).
View 2 Replies
View Related
Apr 4, 2009
I have a spreadsheet that has two different data sources (i.e., A and B). The amounts of these data sources (i.e., the number of columns) varies from sheet to sheet. I have to calculate the averages of these data sources independently and together. Because this data is spread across twenty or more spreadsheets, these calculations can be time-consuming. I want to do the following:
1. Locate the last occurrence of the first data source "A" in row and then insert a column after that cell.
2. In that cell, I want to get the average of each data source for each row of data (i.e., there are always 19 rows of data).
I want to do the same two steps for the second data source "B". Then, I want to insert a column after the "B" average and this column will be used to get an average of each row of data from A and B together. Please keep in mind that the number of data sources for A and B varies from sheet to sheet.
So far, I am working on code to try to " find" the text in a range (i.e., find the last instance of "A"), but I cannot figure out how to get it to get it to stop at the last occurrence and then insert a column. I have some ideas about how to calculate the average, but any of yours are much appreciated.
Also, the row with the type of data (i.e., A or B) is named because this function is part of a larger macro. Therefore, it is relatively easy to get to it.
I have attached a version of the file that displays how I want it to look.
The code I have thus far is:
Cells.Find(What:=A, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
View 9 Replies
View Related
Jun 18, 2008
I am using a vlookup and have a problem. I am assigning a category to an item number based on the first two characters of the item number. For example item number 60123 would equal scrap because of the first two characters of 60. But the item number can begin with either a number or letter. Here is the formula I am using that works for item numbers that begin with numbers:
=VLOOKUP(VALUE(LEFT(E2,2)),Sheet3!A:B,2,FALSE)
It works fine until I reach a item number that begins with a letter, then I get the dreaded #Value error. If I take the value out of the formula then it works for the letter based number items but not for the number based item numbers.
View 9 Replies
View Related
Nov 20, 2008
Here I would like to get your valued guidance for the usage of "IF" formula. I am having two sheets one is new XL-1 and other is old XL-2. I want to have a item number from the old file corresponding to the same item descprition in the new file. I am attaching the snap shots of two files which is more explanatory than describing in words here.
View 2 Replies
View Related
Dec 18, 2012
I am using Vlookup to compare our item number with the suppliers item number but the result is removing the decimal point on some but not all items.I have included a small sample but it concerns almost 10.000 items.
View 9 Replies
View Related
Jun 14, 2013
E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).
E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.
I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.
View 14 Replies
View Related
Dec 9, 2008
i have two columns...a and b (a w/ names, and b w/grades). then i have the table lookup with names and grades all mixed up for many rows. i want to be able to average the grades with appropriate names.
=average(vlookup(name, table, column, false))?? i don't get it to work and how can i specify the grade to average?
View 5 Replies
View Related
Jan 23, 2007
TotHCInv.Value = WorksheetFunction. Sum(KRInv, PBLInv, CRInv, PVInv)
If i >= 34 Then CPSCtphRMA.Value = WorksheetFunction.Average("G" & (i - 30) & ":G" & i)
The first line runs properly, but the second line bugs out with the error message "Unable to get the Average property of the WorksheetFunction class". I can simply do the math, but I thought that using the worksheet function would be easier than summing and dividing. I'm curious, though, as to why I can't seem to use the Average function.
View 3 Replies
View Related
