As you can see, I want to use text to column by "/" as a formula to basically have 10 cells autopopulate from C2-4 to M2-4.
I understand that people suggest using left, mid, and right, but to my knowledge it seems like this would only work on text to columns with 3 items. I have 10 items in each row that should be split by "/" .
I'm trying to create a formula for text to columns if a SKU is put into a box.
Ex) I put code 5495307H7G-**--A into cell A1. I need to split it after specific positions, so it breaks into nine individual codes (9 cells) in the adjacent boxes.
549 53 07 H 7 G- ** -- A
I've seen formulas for searching for spaces and splitting, but is there a way to split one long code at specific points?
I have prapared a formula for B2,B3 and C2,C3 and the reult came in B10,B11,C10,C11 and D10,D11,E10,E11.
From that relust i want to get the final result should be as follows.
B10 should again divided in to anil(in one cell) and 16/12/2013 11:33:50 (in another cell). This formula to be added in B10,B11,C10,C11 and D10,D11,E10,E11 formula.
I loooking for the final reslt, i have explain the in the excel. I reuired the final result with single formula from B2,B3 and C2,C3.
I got a question regarding a what formula can i use to act like the Split method in programming. I would like if this can be done with a formula not programming cos i am a programmer Basically i got a column full of data in the following format:.dddd.ddddddd.ddddd. Now the number of the "d" can be random in between the dots. So i would like to be able to split the line by looking at the "." .There is one thing though that each line does have 3 or 4 "." characters.
I want to split a cell with a formula and not use text to columns. I will have a cell a1 for example with 1d 4h 36m 34s in and want to have 4 formulas 1 in a5 a6 a7 a8
.. so the result will be 1 4 36 34
I know you can split with left, mid and right but don't know how to do it with the desired results.
I have three columns that each have a drop down of text options; column A has three options, column B has three options and column C has two options. I want to have a fourth column that will show a text value dependent on the combination of the three columns.
It ends up being 18 variations so my IF formula just won't compute.
This is basically the format I have and works for a few values then just chucks up an error when I extend it to all 18 variations:
IF(AND(A1="text",B1="text2",C1="text3"),"show this text", IF(AND(B1="other",B1="other2",C1="other3"),"then show this", ) etc etc
Any way I can get this to work for all 18 possible outcomes??
I have a macro which imports data from a mainframe dump text file and performs 'Text to Columns' on the imported data so that formula in the spreadsheet can act on the data. The code works perfectly well when I use it, but if a different user logs on and performs exactly the same mainframe dump and import macro the Text to Columns action splits the raw data in a different way and the result is that the split renders the formulae useless.
I've experimented a little and for some reason it appears that the 'Field Info' parameters which are produced when the Text to Columns function is recorded in a macro differ between users even though the raw data is exactly the same.
I would like to rows based on multiple column conditions criteria. ie., if the columns N, O, P values are "", then hide the particular row. The logic given in the website here, i tried But, it is not 100% working. It works for a few rows at the start of the database & it works for the rows at the end of the database. In between, for a few rows, even if the column values are "" it does not hide those rows.
how to set one entire columns text to two different colors based on another columns values. So for example I have column A and B. Column A has two values called Internal and External. Column B is a title table so the entire column is just titles. We'll say it goes for 20 rows if you need a row count. What I am looking to do change the text in Column B to Red for External and Blue for Internal. I tried the conditional formatting and I just can't seem to find the right option.
how to Chk the text string in particular cell, compare it with a super set column and get the full from of the text string from another corresponsing column and the output will be corresponsing full form of the chked text string?
I'm trying to compare values in 2 separate columns to see how many times the same value appears in both columns. Ideally I would be able to insert a range function to compare the values in the column "ID 1" against the values in column "ID 2" and return the count of times that a value appears in both columns. For example 2122, 1112 and 1718 appear in both columns and I would like the formula to return a count of 3.
In my actual project I'm comparing 2 columns in the same worksheet. The column are column B with data in cells B2:B10266 against column C with data in cells C2:C18560.
What I have is a column of data(text) which contains amongst all the text three strings of text in ever cell in the column which I require copying into three adjoining cells
The data I require is :-
(a) The persons name which is always after the word ‘Requester’ e.g. Requester Steve Robinson
(b) Their office location which is directly after the persons name and is in brackets e.g. (Newcastle User)
(c) The Approving persons name which is preceded by ‘Approved by’ e.g. Approved by Christine Hunting
See examples 1 & 2 below
Example 1
CR0/CRZ3651 Requestor Steve Robinson (Newcastle User) Tel: 01234 798157 Approved by Christine Hunting
Please install and configure 2 Ultra 2s (typhoon and lancaster) for use as ARTE workstations. These workstations require Solaris 2.5.1 plus the same patches as before
Example 2
CR0/CRZ3118 Requestor Doug Cunningham (Newport User) Tel: 0114 9881480 Approved by John Smithers
Please provide support to set up Cisco 2691 Router and PIX-506E Firewall to enable external connection of a remote terminal for project work.
As you will appreciate the text in the cells is of non standard lenght and the three pieces of information can be located virtually any where in the text
I am having a trouble in Excel sheet.My column A has a drop down list with text- possible, not possible, not required.Based on the text, i need to populate texts in columns B, C and D.
For example
Column A drop down selected is "possible" then B coulmn should automatically populate "1-3" C should populate with "3-5" D should be "5-7"
How do you make the Autofill function increment in blocks, e.g. instead of increment 1,2,3 increment 1,8,15 inthe following example: I have a 2 worksheets, one with days of the year across columns and values down rows, and another that summarises the sum of the corresponding days in weeks, so I have 365 columns in sheet 1 and 52 columns in sheet2. Everytime I update the sum range i cannot autofill it in the summary worksheet, as A1:G1 autofills to B1:H1, but I want it to increment to H1:N1.
I am trying to write a micro code to split text which is copied into cell A1 into columns. I can do this fine by going to "data" the "text to Columns" and selecting the places i want to split the text (this is the same for every piece of data i copy in).
The macro works perfectly every time. the problem is that the spreadsheet is shared and i want to protect certain cells on the sheet, when i protect the sheet the recorded macro does not work as the "data", "text to columns" is not available in a protected workbook.
I was just wondering if someone could help me, so i can run a macro to split the text which also allows me to protect cells. In the "text to column" option the "fixed width" (column breaks) i choose are: 4, 25, 34 and 43.
I have a cell that has a comma separated value that is 354 fields long. As such, if I use the Text To Columns feature to split the data at each column, I lose several columns (because excel cannot have that many columns).
How can I break the data at the comma, but have it list in rows instead?
i am trying to complete a spreadsheet which most of it is done but one column i have i have to average everyother square in each column which i did but when i total those columns at the end i get the dreaded #div/01 which means any value that i dont have in a particular column it will not add is there anyway to fix this. i am attaching a sample of the spreadsheet so you can see exactly what i am trying to do .
I've had this issue a couple of times and can't work out an easy way to deal with it.
I have text data in one column.
Name Add1 Add2 City Pcode Manager Name Add1 Add2 City Pcode Manager etc
How do I extract Row 1 into Column 1, R2-C2,... R7-C1, R8-C2?
To make it more tricky what if there isn't a consistent amount of data, ie sometimes I'll have Manager name (6 rows of data) and sometimes I won't (5 rows of data) and then the next collection of data will have it again.
I have some student marks in columns B to F. If some one get below 40 marks he fails and the subject in which he has been failed will come in Remarks column. If he has passed in all subjects remarks column will show Pass.
To bring failed subject initial in Remarks i have to create 5 additional column and then thru Concatenate i joined them.
Is There any formula to show fail subject in Remarks column without creating 5 additional columns?
I am trying to find a formula that will count the number of unique entries there. I have tried the solutions posted on various websites to no avail (most recently:
I have an existing Cash Flow Report that has a column of abbreviated/shortened (WBS Element) title where each cell contains a unique three lettered/numbered amount of characters (Example: 200). These three abbreviated character cells are specific and relate to their full/longer (SAP WBS Element) title (Example: WBS DWRRI-BW066-200).
In my attached excel model (Find, Locate, and Align WBS Elements to Cash Flow Report.xlsx), I need a formula for the, "Cash Flow Report WBS Elements" sheet in cells B3 thru B11 that will look at the abbreviated three lettered/numbered (WBS Element) titles in cells C3 thru C11, then search and recognize its unique counterpart contained in the, "SAP WBS Elements Export" sheet and return this full/longer (SAP WBS Element) title to the, "Cash Flow Report WBS Elements" sheet in cells B3 thru. B11, just to the left of its abbreviated/shortened (WBS Element) title.
I have an existing Cash Flow Report for my work that has a column of abbreviated/shortened (WBS Element) titles where each cell contains unique three lettered/numbered characters (Example: 200). These three abbreviated character cells are specific and relate to their full/longer (SAP WBS Elements) titles (Example: WBS DWRRI-BW066-200).
In my attached excel model (Find, Locate, and Align WBS Elements to Cash Flow Report.xlsx), I need a formula for the, "Cash Flow Report WBS Elements" sheet in cells B3 thru B11 that will look at the abbreviated three lettered/numbered (WBS Element) titles in cells C3 thru C11, then search and recognize its unique counterpart contained in the, "SAP WBS Elements Export" sheet and return this full/longer (SAP WBA Element) title to the, "Cash Flow Report WBS Elements" sheet in cells B3 thru B11, just to the left of its abbreviated/shortened (WBS Element) title.
Find, Locate, and Align WBS Elements to Cash Flow Report.xlsx
I am working on sales information which includes postcodes. What i need to do is seperate the first or first two text characters from the rest of the postcode. I have attached a small snipet of what i am working on. Currently i am using the =Left(A4,2) but this will give me in some case a numerical value aswell. For example E1 or G1 in the case of the sample attached. Is there a formula that exists where it will just return the text values in a cell and not numerical values.
I have a worksheet with several columns. I need a formula to search column D only and each time a specific location is identified to replace that location with alternate text. Example (ORIGNAL TEXT):
Column Dtext to text help.xlsx BIRD FISH DOG BAT BUG
I need to search that listing and each time the word BIRD is mentioned have it replaced with FEATHERS and each time DOG is listed have it replaced with TAILS Final result would look like:
FEATHERS FISH TAILS BAT BUG
All other text should stay the same and replacement text should appear in the cell of the text it is replacing. This is a sheet used by multiple people several times a day and so the Find/Replace option really won't work.
Have working on this for at least 6 months and it just isn't going to happen for me. I thought I could use a Conditional format, but that is producing no results either.
