I cant seem to get sumif to operate properly on cells that use weeknum and edate.
I am trying to create a weekly cashflow that utilses the week number a bill comes off in.
See attached workbookBook1.xlsx
I recorded one for an autofill series which basically came out as
View 4 Replies View RelatedI have a matrix of coordinates in sheet ("layout") (eastings - V4:BR4, northings - U5:U100). I'm trying to run through each northing (row value U5:U100), for every easting (V4:BR4), by writing the coordinate value to sheet("ISO_model"), cell K18. Within the sheet (ISO_model) there is a model which gives an output in cell HA500. I'd like to write this output (for the specific easting and northing) back into the sheet ("layout"), so that I then have the x,y, z values to create a contour plot.
I've tried to start the look through the row of eastings, but it is not working.
Sub noise_contour()
For Each Cell In Range("V4:BR4")
'write coordinate into the model
[Code]....
eg say you call (ie insert a range name) cell A1 "firstcell", B1 "secondcell", then A2 "divisor1" and B2 "divisor2". if you put a formula in A3 which is "=A1/A2", how do you copy and paste this formula into B3 but getting the formula to reference B1/B2 rather than firstcell/divisor1, as it does by default?
View 2 Replies View RelatedI have a financial model that relies heavily upon the EDATE() formula. Whenever I save and reopen it the cell that has the EDATE() formula goes to a #N/A obviously if I try to make a change with this in there it blows up my model.
Does anyone know what causes this and any fixes for it? Also - is there another formula I could use in its place. All I want the formula to do is add 1 month to the date cell I reference. Ex. A2 = Jan 1,2009 A3 = EDATE(A2,1) i.e. Feb 1, 2009.
I am having numerous crash problems in Excel 2007. Some of the with files were developed (and used trouble free) previously in Excel 2003 - others created directly in Excel 2007.
One of the problems appears to be the use of the EDATE and EOMONTH functions which were part of the analyst toolpack addin in 2003. This error is sporadic and causes the underlying cell value to be changed to #N/A when the file is re-opened.
Ok this is tough to explain but I will try. I am using edate to find data that is older than 2 years old. I have a formula that works. =If(C2<EDATE(TODAY(),-24),B2,""). My issues is that it does not auto-update the data until I have manually changed the date. You can look at my sample. If you change the date or double clik on any "cert date" cell, then my data updates.
View 7 Replies View Related
I'm trying to use a non-modal userform as an application option board. Using API, the initial (Activate event) form transparency is set to 10%, and the Userform_MouseMove event turns it to 100%. The problem is that I need the transparency back to 10% (hiding it would be enough) whilst mouse remains outside the userform, and I've no idea of how I can get it.
I wish to protect a worksheet to prevent loose fingered people from altering formulas, but I want the "text box" that is below these formulas (within the same worksheet) to be able to be typed in.
But when I protect the worksheet, the text box cannot be typed in.
Is there a way around this to allow typing in the text box whilst the sheet is protected?
Cell A1 could contain either % value (eg 50.0%) or could contain a numeric value (eg 50.0). (It's input is written by a macro that performs a sorting function, hence the mix of % and absolutes).
I need to copy the contents of A1 to cell B1 with a simple formula "=A1"
The problem is that Cell B1 will either show 0.5 or 50.0 depending on whether A1 is a % or number, respectively.
Doesn anyone know how I can output in B1 with the format from A1?
I would like to reorder a list whilst ignoring any 0 values. I've attached (I hope correctly!) a spreadsheet of what I mean. It's pretty simple, but I've been banging my head over it for a while now!
Sample.xlsx
As part of a working spreadsheet there is a section which records faults by way of a numerical list in a dropdown menu. When a number is chosen the fault description appears in the adjacent cell. Is it possible when the mouse hovers over a number in the list the first 20 characters of the fault description could be shown before the fault number is chosen? The attached file is a simple example of the fault numbers and descriptions, in reality some of the faults have longer descriptions with more technical detail.
View 5 Replies View RelatedI'm trying to automate Disk Cleanup, Defrag and Backup via VBA but can't seem to get defrag to work...
Sub defrag_hard_drive()
Dim returnvalue
'exe file shell
[Code]....
i have data in worksheet 2, a table with formulas using worksheet 2 in worksheet 1, i need to move the data in worksheet 2 to another worksheet, but if i use cut or copy and paste the formulas do not track its movement, so how do i move the data to another worksheet so the formulas know where it went? i thought if you could select the data and drag the data straight into another worksheet but how?
View 9 Replies View RelatedI have a formula I've been using for a long time which uses VLOOKUP to find results based on various reference cells, and then adds them up. To avoid errors caused by VLOOKUP not finding anything for one of the references I have also used ISERROR. The formula returns a blank if the calculation returns a zero.
I now need to bring further references in to the calculation but, using the format I have been, the formula is now too long. Here is my extensive formula:
I'm making a dashboard and currently using a camera tool to show a sheet in a different workbook.
However the camera shot should show the sheet for the current month. (the workbook contains 12 sheets one for each month)
I was trying to reference a cell within the dashboard workbook in the formula bar to select the correct month.
[Code] .....
This is the workbook being referenced and
[Code] ....
This is what I have to try select the sheet with the right month. W2 contains whatever month it currently is.
I get that this formula is wrong because I'm referencing a sheet/cell in the dashboard workbook right after calling the tracking workbook, I just don't know how to write it correctly.
I have a sheet in an excel workbook which I export to a separate file and then save as a text document, I need to remove the tabs in this file, however the file (example attached) needs to be in a certain format to be imported into a piece of equipment which has a proprietary file format. Part of this format is the 2nd row and 5th row must remain present and empty.
[URL]
Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
View 2 Replies View RelatedI'm trying to select a range that will be changing by column. I'm not sure why my syntax isn't working. What I've got:
View 2 Replies View RelatedI need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
I am working in excel 2010. I have a tracking document that lists free tickets and their expiry dates. In the adjacent columns we track redemption details of these free tickets. What I want to do is return the oldest expiration date from A only if the ticket has not been used (i.e. B is empty). This will allow me to see the date the upcoming tickets about to expire so we can make sure they are used.
A________________B
Expiry Date________Redeemed by
15/08/2014
15/02/2014
15/08/2014________John
15/02/2010________Marc
15/02/2011________Bob
I’m trying to use the SUMIFS function in Excel 2007 to evaluate the following formula:
{=SUMIFS(range to sum, range to evaluate, evaluation criterion)}
The range to sum is A1:A10, the range (dates) to evaluate are in B1:B10, and the evaluation criterion is that the date is before 31/10/1999.
So my formula looks like this:
{=SUMIFS(A1:A10,B1:B10,”<31/10/1999”)}
This works fine, but how do I refer the 3rd argument in the function to a date in a particular cell rather than typing in the date specifically?
I am trying to automate a process where a series of numbers would get populated according the range values. Also I am trying to get the automation to pick up the next range when finished with first one and continue with the task.
Here's what I have as start info and where I want to get to.
Sheet1
A
B
1
Ranges
[Code] ......
Excel 2003
Currently my Macro should: Turn off any filtersNumber column A from 1 to 1000 (starting in A14)Drags formula from K14-O14 down to last row of data shown in column Athen puts cursor in last empty cell in column B ready for user to enter data
On point 3 - I want the range to be K14-O14 if active worksheet equals "EXCHANGES" but if its on the "VALUATIONS" tab the autofill range should be L14-P14
I have found bits and pieces of macros on the internet and put them together so if my macro below is not the most effective for my needs but here it is in it's current state:
Here is my macro:
Sub AddNewEntry()
'TURNS OFF FILTER IF FINDS ONE ON
Dim wks As Worksheet
[Code]....
I was just recently forced to create my first UDF and after how well it worked I now am very interested in learning more. I am trying to create a function to sort a range by the values in a specific column and return the range. I know this should be really simple but for some reason my code dies whenever it gets to my inner-most loop. I need to use this in a larger function but for now this is my only question. I did find that Excel 2007 has built in Functions for this but my company still uses 2003.
My
Public Function SortRange(rngToSort As Range, valCol As Integer)
Dim Swapper As Variant
Dim i As Integer, _
j As Integer, _
k As Integer
For i = 1 To rngToSort.Rows.Count
For j = 1 To rngToSort.Rows.Count - i
If rngToSort(j + 1, valCol) < rngToSort(j, valCol) Then
For k = 1 To rngToSort.Columns.Count
Swapper = rngToSort(j, k)
rngToSort(j, k) = rngToSort(j + 1, k)
rngToSort(j + 1, k) = Swapper
Next k
End If
Next j
Next i
SortRange = rngToSort
End Function
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.
Basically I have three sheets. MAIN, Sheet 1 and Sheet 2
Sheet 1 and 2 are in the same format
A3 down is a list of country names and then B3:I71 contains the data im interested in.
I've been trying to create a function that looks at B3:i71 to see if any cell in that range contains a value greater then $0.00. If it does then the row that contains the cell with a value greater then $0.00 (between col A to K) should be copied to sheet MAIN from cells B3 down. This should ultimatley produce a list of data for any row containing a value greater then $0.00. This process should then be repeated on Sheet 2 and should join the list below sheet 1.
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
View 1 Replies View Related