Summarize Data Based On Multiple Criteria
Jan 6, 2010
I have a worksheet with several columns of data that I have to summarize elsewhere on the sheet. Here are the columns:
ID
Status
Joined
Name
Name can take on 4 possible values. For each value in Name, I want to count the number of cells in a column that fit certain criteria. Here are the counts I want to make:
Status OK: Status is a date.
Joined OK: Status is a date and Joined is a "1".
There are going to be about 500 records to count. I've already implemented these counts in a Windows scripting language that interfaces with Excel, but I know there must be a more direct and faster way to do it entirely in Excel, whether with VBA or writing functions into cells.
View 3 Replies
ADVERTISEMENT
May 30, 2014
I want a summary list of data from all columns of worksheets that contain the target data and only where the value in col D is 1. So, in the attached example, the data to be checked is on Sheet1 and Sheet2 and the result should be shown on Summary sheet. There will be some tabs that don't need to be checked for the data so it's not a case of check all other tabs except for Summary.
View 14 Replies
View Related
Jun 30, 2009
I have a "SUMMARY" sheet and then five other sheets. I need to be able to extract the data which is >0% from each of the individual sheets and capture the results in the relevant section of the "SUMMARY" sheet.
For example, the data from sheet "PAYG" would need to be entered into cells F148:AJ155.
In each instance it is just the "model" detail I need to capture (column D)
View 5 Replies
View Related
Dec 3, 2013
I have a problem with excel. I attached the excel sheet to show the question.
excel problem.xlsx
View 2 Replies
View Related
Apr 11, 2008
I have the attached spreadsheet that has 122 columns I would like to create several common button at the top left hand side to summarize my information. The columns that I would like to are name, id, partner.
View 2 Replies
View Related
Jun 25, 2014
I have a requirement where I need to summarize multiple work sheets. And each work sheet as different range. Column names are same in each sheet but number of rows in each are different. Like consider there are 3 sheets with employee details. Each sheet has Employee Name, Employee Number, Employee Location. But in first sheet as 10 employees and second sheet has 20 employees and third as 25. So the requirement is I need to summarize all employees.
View 1 Replies
View Related
May 14, 2014
I track distribution using 1 workbook for each sales rep. Each workbook has a separate worksheet (scorecard) for each of their locations showing which of our products are used in that location, for various functions. Each of the locations has a segment (bar, nightclub, casual dining, etc.), and a class (AA, A, B, etc.). All of the scorecards are identical, and are in the same file folder on our shared drive.
Sample:
Location A Class:AA Segment: Sports Bar Rep: John Smith
Product: Product X Product Y Product Z
Well: 1 0 0
Back Bar: 0 1 0
Cocktail Menu: 0 1 1
I was unable to find an HTML maker so this is not an actual sample but what I'm looking at. The above data indicates that for location A (Sports Bar, Class AA), Product X is used as the well, Product Y is on their back bar and their cocktail menu, and Product Z is not used at this location at all.
I need to set up an analytic workbook where I can sum data based on multiple and grouped criteria, and for multiple reps ie- display a scorecard that shows totals for nightclubs and sports bars, class AA, A, and B, for a particular rep; OR display a scorecard that shows totals for nightclubs, class A for a group of reps. Ideally I would like to do this using drop down menus that allow the user to select multiple criteria in each of the drop downs, having the data auto-populate based on those selections.
View 2 Replies
View Related
Jun 30, 2006
I have two questions:
a. Check the code below:
Dim news1 As String, news2 As String
news1 = "new"
news2 = "polygon"
Dim countie As Integer
For buddie = 2 To b1.UsedRange.Rows.Count
'If b1. Cells(buddie, 1).Value Like "new*polygon" Then
If b1.Cells(buddie, 1).Value Like news1*news2 Then
countie = countie + 1
n1.Cells(buddie, 10).Value = "test"
End If
Next buddie
I have 2 strings, news1 and news2, i need to use the like function to check the occurance of these two strings in all the cells, and just for testing purpose, im printing 'test' it out in another excel sheet.
How do i make that work? the commented line shows what exactly i want, only that i dont want to hard code the string values.
b. If i have a value in the cell:
/new/blahblah/anycra/polygon
how do i split it so as to assign two variables to have 'new' and 'polygon'.
View 9 Replies
View Related
Jun 19, 2014
I need a macro that will take hours by day (columns) by service (rows) per client (sheet) and summarize the data into one database of rows containing client, service, date, and hours. The "Summary of Charges" should only include service hours > zero. I am attaching a sample file. I have little to no experience with vba so I don't even know where to begin. I can copy code.
View 4 Replies
View Related
Mar 30, 2009
I need to remove any rows containing "EEE" in the size column.
I also need to remove any discontinued ("D" in the "Type" column)styles that are currently not in inventory. For example 05-5490 does not have any available in either width "D" or "EW" and should be removed; however, 28-112 does have stock and should remain in the spreadsheet. Anything with an "F" in the "Type" column should be left alone.
View 13 Replies
View Related
Nov 8, 2007
I am trying to sum data based on multiple criteria..
The english version of the formula is Sum all refunds for Store during week
Original Data Format: ....
View 14 Replies
View Related
Sep 22, 2009
I have a table of data: - In cell A1: to C7
A B C#Group Aug-091Merchant Bar2002Plate3Structural - HR1004RHS5Plate3006Structural - HR300
What I would like is a formula that sums up column C if Column B of that row is "Plate" for example
View 12 Replies
View Related
Feb 16, 2010
I have data on a worksheet (“Interface”) that I need to copy over 7 other tabs for analysis.
("Module_1", "Module_2", "Module_3", "Module_4", "Module_5", "Module_6", "Module_7").
The linking Field on the Interface tab defines what row I need to paste the data to on Module 1-7. The column headers are the same on both the interface and other tabs (“YES, NO, N/A, BLANKS, STANDARDS MET, STANDARDS NOT MET, NOT APPLICABLE”)
The tab is selected based on the row
Module 1Medication Management
Module 2Privacy
Module 3Process
Module 4Patient Safety
Module 5Medical Records
Module 6Infection Control
Module 7Environment of Care
I’m trying to modify code written for a similar purpose with no luck. This is the code I'm trying to modify. I know I'm not on the right track yet.
View 2 Replies
View Related
Aug 18, 2011
I have a few people all entering in data into excel, since they cannot be all in one sheet they each have their own copy. I would like to be able to extract all data where column P reads "Red" from each users spreadsheet and then delete the corresponding lines from their spreadsheet (end of day activity)
The Sheets will be named
FDEntryU1AM.xlsm
FDEntryU2AM.xlsm
FDEntryU3AM.xlsm
FDEntryU4AM.xlsm
[Code] .......
I will then need to do the same in another workbook for all items Labeled Blue, but that of course will be same code with just an item replaced.
The idea is after they close up the person overseeing the data can import all at once and leave the users with fresh empty workbooks.
View 9 Replies
View Related
Aug 27, 2012
I have a problem whereby I have a list of data that has a date, a transaction and a balance. I want to be able to rearrange this data into multiple tables, one for each month.
The pictures below explain the situation better, on the left is the list of data I need to sort, and on the right is how I'd like the data displayed. So for the May columns I would like to display all transactions that happened in May and, depending on whether it is an income or an expense, the amount in the corresponding column.
i.e. so the finish result looks something like this:
View 9 Replies
View Related
Jul 27, 2013
I am working on a project to automate the import of data and fixing the formatting.
The data contains the date in column A and time in column B. The time is in increments of 15 min for each day. The rest of the data is in columns C:F. Some of the dates don't have all of the times within the day (so instead of 96 rows of data per day, there maybe 80 rows). I have a second sheet of just dates and times that has the correct amount of rows for each day. What I need to do is have the rows data that matches in both the date and time column from sheet 1 copied over to the corresponding date and time on sheet 2. Blank data rows on sheet 2 are fine. I have found some stuff on .Find, but the stuff I found was for specific searches.
Example
Sheet 1
7/27/13 12:00 AM 1 2 3 4
7/27/13 12:15 AM 5 6 7 8
7/27/13 01:00 AM 9 10 11 12
Sheet 2
7/27/13 12:00 AM 1 2 3 4
7/27/13 12:15 AM 5 6 7 8
7/27/13 12:30 AM
7/27/13 12:45 AM
7/27/13 01:00 AM 9 10 11 12
View 1 Replies
View Related
Sep 27, 2013
I have data and after doing some data manipulation it looks like this
Job #
Part #
Lot #
Total
Grand Total
[Code]..
What I'm trying to do is making a summary sheet that has only the first record with unique values using the Job number, part number, and lot number as the criteria. The grand total in the first record is the total for all of that job,part,lot so i need to bring that value over to the sheet as well. I have been able to do this easily with the duplicate finder, but need a formula to automatically do this.
View 2 Replies
View Related
Jan 2, 2013
I have sheet full of data containing results of multiple tests on various equipment.The sheet contains many columns of data but below are the specifc criteria i want to use to extract the data. As maintenance is carried out regularly the list is always growing. I want to create a dashboard summary of the "Machines" which i will colour using condition formatting. I will list the machines in the columns and would like the rows below each machine to be populated with the results.
Column 1 Lists the various factories
Column 2 Lists the Machine
Column 3 Lists the Part
Column 4 Lists the result.
Results can either be "ok", "warning", "Alert" only
View 6 Replies
View Related
Feb 23, 2012
Excel 2007. I have an Excel file that contains a data dump from an external database file with numerous analytical sheets that perform calculations. Some of these calculations utilize the SUMIFs function that was introduced in Excel 2007. This function does an outstanding job of summing a column on the data sheet based on multiple criteria.
However, someone high up in management in my organization would like to "drill down" into the data behind the
SUMIFs formulas to get a quick snapshot of the lines in the database that roll into the
SUMIFs formula. =SUMIFS(DataBase!E:E,Data!A:A,C7,DataBase!B:B,D7,DataBase!C:C,E7,DataBase!D:D,F7)
If I double click on a cell with the formula above, Excel takes me to the Database tab and selects Column E which is close, but not exactly what I need. What I really need is for Excel to only show the rows on the database sheet that make up the total in the SUMIFs formula and not the entire data dump from the database.
At present, we have to manually apply the autofilter on multiple columns to show the rows in column E that make up the total in the SUMIFs formula which is a tedious and time consuming task. Is there a way to force Excel to do this? Suggested custom database application or pivot tables, but we do not want to reinvent the wheel.
View 2 Replies
View Related
Mar 14, 2012
I have a sheet (see Sheet 1) from a report we run which lists the following information: Personnel Number, Amount, Wage Type. This is generated for 1000's of employees, with each personnel number being repeated several times in column A.
I am trying to pull specific data to another sheet (see Sheet 2), which would ideally generate the sum of "Amount' for a specific wage type for each personnel number. The issue is is that there may be dplicates of the wage type for each ID number (which is also repeated).
For example, the total salary amount on sheet 2 for ID#12345678 would be 0, while for #9876543 it would be 1250. Is there a formula I could use on sheet 2 column B that would generate this?
Excel 2010 ABC1Personnel NumberAmountWage Type212345678550Payment312345678400Overtime412345678300Overtime512345678250
Payment612345678750Vacation798765432800Salary898765432250
Payment998765432100Overtime1098765432450Salary1198765432300Overtime
Sheet1
Excel 2010 ABC1Personnel NumberTotal SalaryTotal Overtime212345678398765432
Sheet2
View 3 Replies
View Related
May 6, 2014
I have a set of data (assume 2 columns, one with a long name and the second with a time). The names contain variables that must be used as criteria (a single entry may contain "Blue" and "On"/"Off") and times vary, based on when the Name turns "On" or "Off" [in minutes: 25 (On), 47 (Off), 89 (On), 100 (Off) and 137 (On)]. I need to create another table that automatically inserts values for all times, to include the missing times (0 min thru 24 and 26 thru 46, etc.). EX: If the first entry is "Blue-On" at "25 minutes", the cells from 0 minutes to 24 minutes are each "0" and become a "1" at 25 minutes - the following cells are "1" until 47 minutes (where it is turned off). (1 and 0 represent "On" and "Off", respectively)
How can I created a formula to insert the correct numbers into the correct places? I'm willing to have multiple cells with formulas and simply hide the columns that are doing the calculations.
View 1 Replies
View Related
Oct 18, 2013
I have a workbook with many sheets of similar but not identical data. I need to extract columns from each sheet based on 5 header criteria and paste them to a single sheet. Each worksheet contains these 5 criteria.
I've been working with the VBA script I've pasted below. It's grabbing the 5 column criteria that I have in sheet 12, and comparing them to sheet 1 in the workbook, then copying them to sheet 12. This much is good, but I need the script to also return the data from the other worksheets as well. I've tried modifying the script based on other loop functions in other scripts I've found, but I'm not having any luck.
View 14 Replies
View Related
Apr 26, 2007
I have three worksheets. The first one has a 20 digit code that is broken into eight sections ( cells) and an amount assign to it. There are currently 150 codes but can grow bigger as new codes are assigned with their own amount. The other two worksheets have the same breakdown for the code but will be filled in as needed. They will record additions or subtractions to the code, like a register. I would like to then summarize (on a fourth worksheet) the +/- activity from worksheet 2 and 3. To do this I will copy the first worksheet then setup three additional columns one will be Increase the other Decrease and the last one Balance. What I will need to make sure that I only pick up the amount for the right code. So I need to create a formula that makes sure that it compares wks 2, cell A1 to wks 4, cell A1 AND wks 2 cell B1 to wks 4, cell B1 AND wks 2, cell C1 to wks 4, cell C1 and so fourth until the eighth breakdown of the code. When this is true then I will need to add the amount that was recorded on wk2 or wk3 for that code on wk4. The codes may be used various times so the sum of the values of wk2 or wks3 will need to be cumulative.
I've been reading about Sumproduct and I have created this formula but the result is # NUM....
View 9 Replies
View Related
Mar 18, 2013
I maintain the data flow at my work. We send and receive the data using excel files with specific formatting that I then upload to the database. Each time I send or receive the excel file I must log them, this is what my code question refers to.
I use RDBMerge to merge all the contents of the 100 plus excel files into one worksheet. The first part of the macro cleans up the merge data for use in the log (i have attached an example of the clean data and finished log).
The blue shaded area of the "Raw_Data" is what the clean data looks like, the yellow column is what current macro records for each record.
As you can see by the example the Raw_Data is only two files LL_LLL_BOB_ToLLLLL_20121228_01 & LL_LLL_BOB_ToLLLLL_20121230_01, each with more that one record.
The log code in column "H" Is based on this criteria:
First Letter of the Unique ID in column "E" - O, M, or L
Program Type in Column "F" - U or R
1. O-U = U
2. O-R = RU
3. M-U = U2
4. M-R = R2U
5. L-R = R
You will note that Columns G-R of the "Log Sheet" correspond to the "Record Type" found in Column "G" of the "Raw_Data" sheet.
This is the area where my skill at using scripting dictionaries fails.
The results for the log list each file only once, but the log code for each corresponding "Record Type" in columns G-R of the "Log Sheet" must contain each unique instance of the code. In other words
if LL_LLL_BOB_ToLLLLL_20121228_01 contains an O-U with an "A" Record Type and an M-R with an "A" Record Type; then, on the log sheet there needs to be the codes "U/R2U" in the cell intersection of the LL_LLL_BOB_ToLLLLL_20121228_01 record row and "A" column (which is column "G")
So, If the File contains one of each code for each Record Type the corresponding cell must house one of each code separated by a "/" without any spaces. This means the cell value could no code, or one code and all the variations in between to all five codes. Also, for ease of human reading the log codes should be concatenated in the 1-5 order that I listed them in (U/RU/U2/R2U/R)
Here is my code so far.
VB:
Option Explicit
Sub test()
Dim dic As Object, a, i As Long, rng As Range, e, w, n As Long
Set dic = CreateObject("Scripting.Dictionary")
[Code].....
View 1 Replies
View Related
Jun 29, 2014
I have a directory which contains many files, they are all names based on their locations. eg. Burwood-File1.xls,Burwood-File2.xls,Burwood-File3.xls etc
I have a master that which will contain the branch in the first column.
I have defined the directory location in a separate sheet as well as email template.
When I click on the Send Email button I want ti to attach the files that match the Branch name.
The Branch list will constantly grow.
View 2 Replies
View Related
Feb 24, 2014
Im struggling to find a formula to populate cells based on values to be checked in two fields (ICODE, COMPANY) as shown below.
In the example here, all records where ever the ICODE = 49, i need to populate the fields(columns) AD1,AD2,AD3 or AD4 with the product name of the same company where the ICODE <> 49. There could be between 1-7 products per company.
CURRENT SHEET
ICODE PRODUCT COMPANY AD1 AD2 AD3 AD4
89PENS ABC STATIONERY CO LLC [code]....
The attached example file may be a better alternative to view this problem.
View 2 Replies
View Related
Feb 1, 2012
Worksheet 1: In column A I have a people's initials. In coumn B I have text boxes with miscellaneous text. (The same person could have multiple rows within this sheet.)
e.g.
AAA blue
BBB orange
AAA round
CCC smelly
AAA elongated
Worksheet 2 I want to show:
A2 = initials, B2 = first text box associated with that person, C2 = second text box (different row) associated with that person (if applicable), D2 = third text box (different row) associated with that person (if applicable), etc.
e.g.
AAA blue round elongated
BBB orange
CCC smelly
View 3 Replies
View Related
Aug 7, 2013
I'm starting a dashboard, where on the front page I have two combo boxes on the left, and three empty fields to the right. I'd like the three fields to the right to auto-populate table-based values depending on the chosen criteria from BOTH fields (by store and month/date). I've attached a sample of what I've got so far. I've only provided three tables for this example, and I have a table with the same column/row titles for each metric and I have three different metrics I'd like to auto populate: COGs, Sales, and GM% or in the example, metric 1, metric 2, metric 3. No pattern in the table values, just wanted to populate the fields quickly. All fields are organized by store/month-date and I've set up a link to my combo boxes on a calculations tab.
View 2 Replies
View Related
Jan 24, 2007
I have an excel spreadsheet with various worksheets, each worksheet is named different according to tests that must be performed. Each test is different and inputed by rows, there is one column from each test in which we populate "passed", "failed", "pending", "N/A", or "user issue".
The problem is searching for all the "failed", and "user issue's" throughout all the tabs. I want to create a tab which will identify and display all the "failed", and "user issues" on one tab, and sort it according to its tabbed test name. Now, not to be picky, I would like to copy only a few cells along with the failed message, if not, the entire row would be fine. Could anyone assist? to sum it up, I want to create a sheet that'll identify all the issues existing throughout tabs.
View 3 Replies
View Related
Mar 18, 2014
I've got a matrix combining actions on the left hand side (Col A) and owners on Cols B to F. I have drop down list for each action/owner combo: N/A, OK, KO, TBD.
Owner #1
Owner #2
Owner #3
Owner #4
Owner #5
Results
Action #1
OK
TBD
N/A
N/A
N/A
OK
[code]....
I would like to create a formula in Col G that does the following:If any of the values in columns B to F equals OK, then OKIf any of the values in columns B to F equals KO, then KO I've been tinkering with multiple IFs and quite rightly got bogged down as too many criteria to take into account...
View 4 Replies
View Related
