Summing Different Cells In Column Across Multiple Worksheets
Mar 9, 2009
I am working on a task analysis involving functions performed by different operators, each function marked by an "X" and totaled at the bottom of each operator column. I have seven sheets, named "Main Engine, Propulsion System, APU and ELEC.", etc. Columns B-F on each sheet are headed "C/M, Engr, Nav, LM, DE" respectively.
I need to add/total the bottom figure in each column (total of number of X's for each column) on a separate, final worksheet. Each of the worksheets contains a different number of functions, therefore the total of X's in each column is listed in a different cell# on each worksheet.
So this is my dilemma as the thread title states: I need to be able to sum/total the amount form different cell numbers (same column) across different worksheets into a cell in a separate, final worksheet.
I have figured out how to do this if the numbers are in the same cell across worksheets, but not varying cells by column.
View 9 Replies
ADVERTISEMENT
Jan 13, 2014
I have made a basic holiday planner, where each employee has one worksheet which shows 52 x 5 day weeks.
When an employee asks for holiday, I put a 1 in the corresponding day (cell). What I need to happen is that if 4 first aiders all ask for holiday on the the same date a warning User form loads up.
The names of the 4 worksheets are;
"Jason L 2014", "Sharon L 2014", "Alan B 2014" and "Chris M 2014".
The ranges for the 5 day weeks are
"B7:F7", "L7:P7", "V7:Z7"
"B10:F10", "L10:P10", "V10:Z10"
"B13:F13", "L13:P13", "V10:Z13"
"B16:F16", "L16:P16", "V16:Z16"
[Code] ........
The code should not run the User form until the sum of the same cells across the 4 worksheets = 4.
By this I mean if 3 of the first aiders book B7 off, the code searches the 4 worksheets and if the sum is 3 then nothing happens. However if the 4th and final first aider tries to book the same day off, when the code runs it totals 4 and the User form runs.
View 1 Replies
View Related
Jul 4, 2008
I have circa 500 sheets (all with identical layout) in the same workbook. All the data is displayed in Columns "A" and "B". The entries in Column A are variable (5-6 digit numbers) B contains numbers between 1 and 200.
I would like to be able to add together the sum of the numbers in B against an entry in A- I have a list of all the entries in column A.
The data in column A is in ascending order but may not always be in the same cell reference.
E.g. "123456" and appears in 3 sheets
(sheet2) A9 ="123456", B9= 5
(sheet 234) A111="123456", B111= 7
(sheet 456) A87 ="123456", B87=3
"123456", total 15
View 9 Replies
View Related
May 9, 2008
I have Master sheet where I collect info from sub sheets. All sheets are similarly formatted, ie. product numbers on column A and headers on row 2. I need to sum values from all sheets based product number and header. Master sheet includes all product numbers and some extra headers, sub sheets include only needed numbers. Headers on sub sheets are identical.
Currently I have this thing solved with following formula:
N48=sumproduct(sumif(indirect("'"&$B$378:$B$385&"'!A:A");A48;indirect("'"&$B$378:$B$385&"'!L:L")))
Where B378:B385 includes sheet names.
But problem with this is that column is hard coded, so I have to know that that value I am looking for is in column L. That wouldn't be show stopping problem on its own, but I have columns all the way to DR and copying formulas for each column takes a lot of time when I have to manually update each column. Just copying cell holds that L:L and doesn't change it.
So, in addition of getting values for specific product number I need to get values from specific column based on column header.
View 9 Replies
View Related
Mar 26, 2013
I am working on a sum formula for a column and I only want to sum if the value is a multiple of 15 or likewise if the value divided by 15 is an integer. I know that I could use several sumif statements to accomplish this, but there isn't really a maximum value. Is there a simpler way to accomplish this? I am comfortable enough with VBA so that is definitely an option as well.
View 4 Replies
View Related
Feb 27, 2012
I have a statement from an account (which happens to be the government) in which they list every invoice they are paying and each item on that invoice. But they don't have an invoice total. I'd like a way to add up the item totals for each invoice and put the total in column D. Each invoice could have 1 to 10 different items on it.
A(invoice#) B(Item) C(total) D(invoice total)
111 widget 1 $5
111 widget 2 $10
111 widget 3 $8 XXXXX
222 widget 1 $5
222 widget 5 $15 XXXXX
333 widget 2 $10 XXXXX
444 widget 5 $15 XXXXX
I had thought an IF formula would be the way to go.
View 6 Replies
View Related
Mar 6, 2013
I have been trying multiple SUMIFS and SUMPRODUCT formulas to try and revamp my budget spreadsheet. My first criteria is the month being a certain number (contained in a column), if that condition is met it needs to look for the account number I am budgeting for (row heading) and if it matches both criteria I need it to sum the Column that has the row heading of the account number. I have succeeded in doing a SUMIFS and manually finding the column that has the heading of the account number I am looking for, but I would like this to be an automated process so I can copy the formula. Below is the data I'm using (a very, very small portion of it), and the results are how my budget sheet is going to look. These will be on separate tabs in the workbook.
EX: For July electric revenue (44211) I need my formula to: (if the Month column=7 & if the Account Code row heading=44211, sum the column that has the heading of 44211). So far I cannot get this to work.
DATA
Account Code
44211
44215
[Code]....
View 4 Replies
View Related
May 9, 2014
I am looking for a formula which will sum numbers with less than symbols in front of them (i.e. they are text cells), and then replace the less than symbol again in the summed cell if initially present. The problem is that not every cell contains a < symbol, some of them are just numbers, and not every column contains a < symbol either.
e.g. I am looking for a formula which if entered in row 5 of this example would give these answers.
A
B
C
D
1
<0.001
<0.1
0.2
<0.01
2
<0.0001
0.1
0.2
<0.1
3
<0.0001
<0.2
0.2
<0.1
4
<0.001
<0.1
0.2
<0.01
5
<0.0022
<0.5
0.8
<0.22
View 11 Replies
View Related
Apr 21, 2014
I often look at utility data (start date, end date, use, and cost) and have a large list with up to several years worth of monthly data. I am trying to write a formula that will automatically sum the last 12 entries of "use" no matter the amount of lines; be it 12 or 112.
View 2 Replies
View Related
May 14, 2013
I have a table that looks like the following, only it's actually much larger:
_Red Blue Green Blue
A 2 4 2 3
B 5 2 1 1
C 3 1 2 5
D 2 3 4 2
As an example, I'm trying to sum all cells that match Blue and C. The answer should be 6, but I always end up with either zero or #VALUE.
View 4 Replies
View Related
Nov 9, 2012
I have this formula populating a huge table of data for number of inspections performed, the first reference is a name of an individual, the second reference is a name of the company, and the third reference is the week ending date.
=SUMPRODUCT(((Sheet1!$C$3:$C$1000=$A2)*(Sheet1!$D$3:$D$1000=D$1)*(Sheet1!$B$3:$B$1000=$A$1)))
there are 5 of these sheets for 5 different categories. I can get these spreadsheets to populate but i then need to be able to sum from each spreadsheet all of the times an individual inspected a certain company, so one cell in each of the 5 tables.
Each time I do this it returns a 0. If i sum from one table it will return a number but if I sum from multiple tables I get 0
=SUMPRODUCT(((Sheet1!$C$3:$C$1000=$A2)*(Sheet1!$D$3:$D$1000=D$1)*(Sheet1!$B$3:$B$1000=$A$1)))
View 1 Replies
View Related
Feb 23, 2012
Excel 2007. I have an Excel file that contains a data dump from an external database file with numerous analytical sheets that perform calculations. Some of these calculations utilize the SUMIFs function that was introduced in Excel 2007. This function does an outstanding job of summing a column on the data sheet based on multiple criteria.
However, someone high up in management in my organization would like to "drill down" into the data behind the
SUMIFs formulas to get a quick snapshot of the lines in the database that roll into the
SUMIFs formula. =SUMIFS(DataBase!E:E,Data!A:A,C7,DataBase!B:B,D7,DataBase!C:C,E7,DataBase!D:D,F7)
If I double click on a cell with the formula above, Excel takes me to the Database tab and selects Column E which is close, but not exactly what I need. What I really need is for Excel to only show the rows on the database sheet that make up the total in the SUMIFs formula and not the entire data dump from the database.
At present, we have to manually apply the autofilter on multiple columns to show the rows in column E that make up the total in the SUMIFs formula which is a tedious and time consuming task. Is there a way to force Excel to do this? Suggested custom database application or pivot tables, but we do not want to reinvent the wheel.
View 2 Replies
View Related
Jan 6, 2009
I'm currently doing a survey using an excel workbook that contains multiple questions across multiple worksheets using radio buttons linked to certain cells.
I have around 400 workbooks coming back to me, so what i want to do is take specific values from across many worksheets within each workbook and combine them into a large master table in a seperate workbook.
I've tried using VBA, but not being very proficient at it i've hit a brick wall with that, so i'm hoping that there is an easier way to do it than what i'm currently pursuing.
View 9 Replies
View Related
Aug 18, 2007
I have an excel workbook with 8 worksheets. Each worksheet has vertical columns (approx 250 columns per sheet) of numeric data. Is there a function or macro that will combine all of this data into one vertical column without having to individually cut and paste each one into the new column?
View 3 Replies
View Related
Jul 2, 2014
I have attached a test workbook excel 2010 (ignore ref# errors, I've cut the workbook down for uploading purposes) What I would like to do is have a 'Button' on my 'information Sheet' which when clicked would clear certain cells. I have searched the forum but can't find a solution, everyone seems to want to delete rows or columns but I just want to clear certain cells. The workbook will have 11 sheets each named 'caravan 1' through to 'caravan 11' The uploaded test workbook only only has 3 sheets.
On 'caravan 1' (which is slightly different to the other 10) I want to clear the content of cells
B4 & B5
C4, C22 & C41
D4 & D5
E4,E5, E22,E23,E41 &E 42
On all other 'Caravan sheets' I want to clear the contents of cells
D4 & D5
E4, E5, E22, E23, E41 & E42
It would be icing on the cake if it could give a warning such as " are you sure you want to clear these cells" but that isn't really necessary. The worksheets will be password protected, but the cells mentioned above will not be. If it proves too difficult to clear all the cells on all the sheets with one click, then perhaps a simpler solution might be to have a button on each sheet instead
View 8 Replies
View Related
Jan 31, 2014
1.I need to protect certain locked cells from editing and allow certain unlocked cells to be changed on multiple worksheets.
2.When all of the changes are made to the unlocked cells, I need to password protect the entire workbook (except one worksheet) from any changes. (i.e. Prevent even the unlocked cells from being edited)
3.I also need a password to un-protect the workbook and return it to the state described in # 1. above .
View 1 Replies
View Related
Oct 4, 2013
My workbook is a variation of the below repeated on a number of sheets.
Sheet 1
A
B
C
1
Name
Carrots
Peas
2
John Smith
0
7
3
John Doe
2
1
4
Joe Bloggs
4
0
On a separate summary sheet Im struggling to create a formula that would look through all sheets and Sum where 'John Smith' appears and then sum the number of 'Carrots' (if any) and 'Peas' and then the same for any other names that has values attached to it. The names in each sheet may not be in the same order or appear at all otherwise I would just use a standard sum on each sheet.
View 2 Replies
View Related
Mar 28, 2008
Is it possible to sum across worksheets from the first sheet to the CURRENT sheet so that a week on week average total can be calculated which will not be altered by the addition of future worksheets?
eg. We have 10 weeks named week 1, week 2 etc.
In week 2 I want a total average (in this case leads/hours) of week 1 and week 2.
In week 3 I want a total average of week 1, week 2 and week 3.
View 14 Replies
View Related
Feb 10, 2014
I'm looking for a formula that would look up the individual employee (i.e. Name1 for example) in the January sheet and then look for and sum any amounts that have a number and a symbol as reflected in A2 through A10 (8V, 4V▲,etc), which would then be calculated with a similar formula for the February sheet, specifically the time period between 1/26/14 and 02/08/14 as indicated above.
As employees can switch shifts, the formula would have to locate now in February where employee (Name1) is and find that row for the same symbol/number calculations for this same time period in that given month. Currently I'm using an array formula which can be seen in the attached file in cell I4. The problem is that the formula assumes that Name1 is always in the same spot in all monthly sheets which isn't the case month to month. The formula looks like this without the vlookup portion:
[Code] .....
I also need to do a similar vlookup or match, etc with this formula too:
[Code] .....
Attached File : sample payroll.xlsm
View 7 Replies
View Related
Dec 2, 2007
book1.xls has many worksheets and I need to delete col4 of each one. Any suggestions as to using a macro or VBA? Or any other shortcut?
View 5 Replies
View Related
Feb 10, 2013
I have many worksheets named with client names and in different order from what I see in VB.
How can I copy cell C6 from each sheet into a column somewhere (it doesnt matter)
But the order of worksheets is messed up (On VB Sheet1 is in 3d place sheet2 is in 10nth place ... and so on) I need the vales to be pasted in the order of which I see the worksheets when I open the file.
View 6 Replies
View Related
Jan 26, 2014
I have an excel file with few worksheets. From the 2nd to the 22nd the structure of the worksheets is the same. For each of them I have to add the same column of data. How do i do this?
View 5 Replies
View Related
May 18, 2006
I've got 2 worksheets SH1 & SH2( Two different workbooks) Col A is NAME in each Sheet. Need to Match Col A Sheet 2 to Col A Sh1 if they are identical. If identical copy info from Col B, and Col E- G to Sheet 1 Col B and Col H-J. If a Name is in Sh2 but not in Sh1, Copy (using same Column positions: copy info from Col B, and Col E- G to Sheet 1 Col B and Col H-J ) to NEXT AVAILABLE ROW in Sh1 COL A, and highlight it in Some bright color ; Then open a MSG Box telling me how many new names were added.
View 8 Replies
View Related
Dec 20, 2006
I have a control box button on a sheet and when I click it, I'd like to take the average for the values in Cell M8 on all Worksheets in my Workbook with the exception of the ones named Cover, Opportunity Map, and Average....and put the average calculated in cell M8 on the sheet called Average.
My issue is that the number of worksheets may change for each instance, which is why I'm trying to incorporate any that might be in the workbook other than a few named ones.
Is this possible and if so can anyone assist with the code?
View 9 Replies
View Related
Jan 20, 2007
I have multiple sheets in a workbook, and a want to sum the multiplication of two cells on each sheet on a total sheet. i.e. totalsheet!A1 = sheet1!A1 * sheet1!B2 + sheet2!A1* sheet2!B2....+ sheetN!A1*sheetN!B2
I need to do this for hundreds of cells, so mutiplying them on each sheet is not an option. There are enough sheets that writing out the brute force equation as above is too long. I know you can do total!A1=sum(sheet1..sheetN!A1) to add all sheet A1's together, but multiply and sum?
View 6 Replies
View Related
Dec 2, 2008
what i want to do is 1 have a workbook with 3 worksheets. Sheet1 contains the columns:
Reference No. Line Item No. Amount Date
1 3 500 12/01
2 4 900 01/01
Sheet2:
Reference No. Line Item No. Quantity PersonInCharge
1 3 10 Kim
5 6 60 Noel
For sheet 3, what i want to happen is that when i run the VBA macro, it searches through both worksheets (Sheet1 and Sheet2), finding rows that have matching Reference No. AND Line Item No. and combine all of the columns (and values) for that particular row into another row in Sheet 3. So for the above data set, the resulting data in Sheet 3 would be:
Reference No. Line Item No. Amount Date Quanity PersonInCharge
1 3 500 12/01 10 Kim
As this is the only entry in both sheet1 and sheet2 where there is a matching reference and line item no.
View 9 Replies
View Related
Feb 4, 2008
I have a huge Excel spreadsheet going into the 10 000 mark.
What I want to do is split the spreadsheet into multiple worksheets based on the Company column.
I've attached a small sample.
View 4 Replies
View Related
Jul 21, 2014
I have over 200 worksheets - separate participants data. On each sheet there is a summary column of data at the moment. I now want those columns of data copied to a summary sheet but transposed to rows.
I have attached an example with 3 worksheets and the sort of summary sheet I am after.
View 6 Replies
View Related
Apr 17, 2013
I am using Multiple worksheets ( 30 to 35 ) of same format to calculate Individual scores of an event. Each sheet contains Participant Name in C4 and Score in E 21.
Macro to provide a summary sheet which returns C4 & E21 in all the sheets..
The score in E21 is calculated thru another macro done with excel recording feature..
View 4 Replies
View Related
Oct 6, 2009
I have a workbook that tracks pollutant emissions. The workbook could end up having up to 180 worksheets, one for each pollutant and the emission total. I have VBA to create a new sheet for each pollutant (attached) using a hidden template sheet.
The summary sheet in position 1 needs to list each pollutant worksheet on a new row, and the same 4 cells from each worksheet (id, name, value, value). I have been typing out the cell references in the summary sheet, and it gets boring [=Sheet!Cell id], [=Sheet!Cell name], etc.
Is there a way for me to copy those cells to the summary sheet when the new sheet is created?
View 6 Replies
View Related
