If I have the following: =SUM(E2:F2) - G2). So lets say that E2 has 50, F2 has 60 which = 110. Now I want to take that 110 and subtract it from what is in G2 and put the result in H2.
View 2 RepliesI have a spreadsheet of clients' body weights each week which goes in a column and to the right of it I have a "diff" which I want to show weight gain/loss.
So for a client with weigh-ins the week of 10/1, 10/8, and 10/15 the columns will be:
10/1(V1)--Diff(W1)--10/8(X1)--Diff(Y1)--10/15(Z1)...and so on.
If I have weigh-ins for each week, no problem. I would just have to: =SUM(X1-V1) to get the change in weight from the week of 10/1 to 10/8. Say the client weighed 200 on 10/1 (V2) and 195 on 10/8 (X2), the difference (or "diff" (Y2)) would be -5.
But let's say the client didn't weigh-in on 10/1. The difference in weight is going to be 195. Or if they weighed-in on 10/1 but didn't on 10/8 it's going to read -200.
So I have two cells (say V2 & X2) that if one of them is blank, I want the "diff" to read "N/A" or at least leave the cell blank.
I was trying to subtract two arrays of data and putting the result in some cells but with no success unfortunately. I'm relatively new to VBA and I'm just starting now to make calculations with arrays so excuse my little knowledge. The arrays that I'm trying to subtract are from row 1 to 250 and m and n variables have the number of the columns. Here is my routine:
View 3 Replies View RelatedI have four columns of data, as follows:
label 1, value 1, label 2, value 2
I need to create a formula in the fith column that for each line will tell excel to:
look for entry in 'label 1' in 'label 2' if there is a match, then subtract value 1 from value 2, display result.
I have tried doing this with SUMIF but am getting nowhere fast....
I am trying to create a formula that is able to calculate an end result based on the cell contents of 3 columns, the results are predefined in 3 other columns, here D, E & F
For example:
Column A Column B Column C Column D Column E Column F Column G (Results)
Royal Mail 1 100 2.8 2.3 1.2
Royal Mail 2 100 2.9 2.4 1.3
Royal Mail 3 100 3.0 2.5 1.4
DPD 5 200 4.5 2.8 1.5
DPOST 1 100 1.2 3.2 1.7
I am trying to create a calculation that in Column G will work out, IF Column A=Royal Mail AND Column B=1 AND Column C<=100 THEN Answer is [@[Column F]], IF Column A=Royal Mail AND Column B=2 AND Column C<=100 THEN Answer is [@[Column F]], IF Column A=Royal Mail AND Column B=3 AND Column C<=100 THEN [@[Column F]], IF Column A=DPD AND Column B=5 AND Column C<=200 THEN [@[Column E]], IF Column A=DPOST AND Column B=1 AND Column C<=100 THEN [@[Column D]]
Here are an example of what I have tried, amongst many...
=IF(AND(AND([@[Default Post Postal Service]]="Royal Mail"),AND([@[Default Postal Format]]=1),AND([@Weight]<=100)),1,0) Everything is zero.
When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
Is there a easy way to sum a column of numbers in excel and ignore hidden rows?
View 9 Replies View RelatedI've got a spreadsheet with bird species, dates (just day-month) and numbers (how many individuals). It looks a bit like this (well....the real sheet is a lot bigger). Note that some dates appear multiple times, because I counted for many years.
1
A
B
C
D
E
[Code]....
What I want is an overview, to be able to check which birds I've seen on which days of which months (the year doesn't matter) and in which numbers. It's supposed to look like this.
1
A
B
C
D
E
F
[Code]....
It should look for duplicates in row 2, and sum up all the values within these duplicated columns into the first one... It should also remove the columns from which it has summed up the values, except for the first one.
In the attached spreadsheet I would like to calculate the totals for pipe and valves by service & size (Columns A,B D & D) from the groups of paired columns Pipes & Valves under the headings of SD0-1, SD0-2, SD0-3 etc etc to LP-SD8 multiplied by the number of Service droppers (Highlighted in red) with the totals in columns G & H.
I can individually write a formula such as G7 = (I7*I4)+( K7*K4) etc etc, but is there a way to lookup up the data cells?
I have columns that contain text (Populated from drop down lists).
I need to be able to sum the totals of each type from the drop down list. These totals can either be displayed on a second sheet.
I have the following problem -I want the cell with "SUM OF SPE HOURS (C1)" to contain the numerical value equal to the SUM of numbers in column C ONLY IF column A of the corresponding row contains "SPE". Basically a SUM function which only picks up the rows corresponding to SPE.
A
B
C
D
E
SUM OF SPE HOURS i.e. 6
SPE
4
LDE
8
SD
10
SPE
2
I have added a worksheet to a workbook, a co-worker will populate another worksheet within is workbook. The worksheet the co-work populates is a schedule. On my worksheet
I've set a possible units per day value, then pull from the schedule, starting from the top, the order that can be done in this time frame.
My problem is every so often in the schedule she will total the units in a cell (the units for each order are in one column and the total is also in this column, and this has to be this way for others in the plant). My formula checkes the sum of the units in this column, but it includes the cell that has the total units. This is the only cell that has a value in it on this row. I was trying think of some way to check the order number column for a blank, and if it was then subtract the value in the cell that has the units total in it.
I am tryinig to use an if statement but I don't have it correct. If columns E, F, and G are not null I want it to subtract 3 from the Total column. Right now it is subtracting from G.
Sub SubtractPoints()
Dim I As Long, subpoint As Long
With ActiveSheet
subpoint = . Range("h65536").End(xlUp).Row
For I = subpoint To 2 Step -1
If Not .Range("E" & I) = "" And Not .Range("F" & I) = "" And Not .Range("G" & I) = "" Then
.Range("H" & I) = "=RC[1]-3"
End If
Next
End With
End Sub
I'm making a spreadsheet that tracks instances when something goes above or below a threshold. Anytime it goes below, a column populates with the number 1, and if it happens to go below a threshold on a Friday, a separate column populates with the number 2. If its doesnt go below, the column with 1 does not populate, however, every Friday populates with a two.
I need a column that adds the 1 and the 2 when the threshold is broken on a Friday, but only shows the 1 when the threshold is broken on a non friday and shows 0 when the threshold isn't broken, but happens to be a Friday.
I am having an excel problem such that i have several months in a given year and I want to set up a formula where I can enter a specific year and it will return the sum of all the cells that belong to that year (see attached sheet). So basically if I have 2 months in 2006, 2 in 2007 and 2 in 2008 with corresponding values for each of those months, I want to enter a year in another part of the sheet and a value is returned to me to show me the sum of the revenue for all the months that are in that year. So if I enter 2007, it will sum both those values that belong to 2007.
The years and months are dynamic so I can't just sum the columns because in column D it could be 2006 (depending on the other inputs of my spreadsheet) or it could be 2007, so I essentially need some formula that checks the array to see if that cell belongs in a year that matches the criteria and if it does sum it to all the values that match that criteria. I have tried using vlookup, match, index but can't get it to work.
If in Cell A2 I have a function that updates it's number value automtically (i.e. From 5 to 7) and in cell B2 I have a value I wanted subtracted to the value Cell A2 updated by. Is this task possible?
In the I.e example, cell A2 had an updated value by 2, will it be possible to subtract that value in Cell B2 and continue doing so if Cell A2 kept updating?
I need to create a report based on three columns. I have explained in detail about my requirement in the attached sample workbook.
I hope someone will help me to solve the problem through VBA because the items & expenses may vary at times. Hence, I feel a Macro will be the best solution.
I'm looking to do the following below: column A would have numbers, column B would have words and a few columns over i would have the total of each same word
column A column B
60house
120car
30misc
52.25food
83.33gashouse 180.25
120.25housecar 120
25miscmisc 55
105foodfood 157.25
50.5gasgas 133.83
I have a worksheet (downloaded from Paypal) and the columns I need to sum are of varying length (sometimes 12 rows and maybe 200). I am having trouble finding a way to find the end plus one of the column to write the formula in.
Say I have the number 325 in A1. Each time I type a number in A2, B2, C2, D2, E2, A3, B3, etc... I would like the number (325) in A1 to be reduced.
Also, how do I create a pull down list?
My data in excel looks like this:
A B C D
Visit_Date Day_of_the_VisitHousing_Tour_TimeNumber_in_Party
3/22/2012 0:00Thursday 12:00 P.M. 2
3/22/2012 0:00Thursday 12:00 P.M. 4
3/22/2012 0:00Thursday 12:00 P.M. 1
3/22/2012 0:00Thursday Not Requested 2
3/22/2012 0:00Thursday 12:00 P.M. 3
3/22/2012 0:00Thursday 12:00 P.M. 3
3/22/2012 0:00Thursday 12:00 P.M. 4
3/22/2012 0:00Thursday Not Requested 1
3/22/2012 0:00Thursday 12:00 P.M. 2
3/23/2012 0:00Friday Not Requested 2
3/23/2012 0:00Friday Not Requested 5
What I'd like to be able to do is if Column A,B, and C are the same to sum column D. So, for example, I would like the data above to look like this:
A B C D
Visit_Date Day_of_the_VisitHousing_Tour_TimeNumber_in_Party
3/22/2012 0:00Thursday 12:00 P.M. 7
3/22/2012 0:00Thursday Not Requested 3
3/22/2012 0:00Thursday 12:00 P.M. 12
3/23/2012 0:00Friday Not Requested 7
I have been trying multiple SUMIFS and SUMPRODUCT formulas to try and revamp my budget spreadsheet. My first criteria is the month being a certain number (contained in a column), if that condition is met it needs to look for the account number I am budgeting for (row heading) and if it matches both criteria I need it to sum the Column that has the row heading of the account number. I have succeeded in doing a SUMIFS and manually finding the column that has the heading of the account number I am looking for, but I would like this to be an automated process so I can copy the formula. Below is the data I'm using (a very, very small portion of it), and the results are how my budget sheet is going to look. These will be on separate tabs in the workbook.
EX: For July electric revenue (44211) I need my formula to: (if the Month column=7 & if the Account Code row heading=44211, sum the column that has the heading of 44211). So far I cannot get this to work.
DATA
Account Code
44211
44215
[Code]....
I have a column range,say (a1:a45) that has a 2 digit numerical value, next to that I have a column range, say (b1:b45)
I want to test subtract the value in b1 from the value in a1
if the answer is equal to or greater than 0 I want to colour the cell green.
if the answer is equal -2 I want to colour the cell yellow.
if the answer is less than -2 I want to colour the cell red.
I'm decently competent at VBA but no real experience with userforms. I have a very simple 3x2 table:
Type $Amount
Cash $xxxxxx
Product A $yyyyyy
Product B $zzzzzz
I want a simple userform that moves money between the products, ie the user selects a money amount in the form (ex: $1000) and that amount is added from one product and simultaneously subtracted from the other. Note that the amount selected would be subtracted from one product's current balance and added to the existing balance of another product. No new money is coming into the system.
I have Master sheet where I collect info from sub sheets. All sheets are similarly formatted, ie. product numbers on column A and headers on row 2. I need to sum values from all sheets based product number and header. Master sheet includes all product numbers and some extra headers, sub sheets include only needed numbers. Headers on sub sheets are identical.
Currently I have this thing solved with following formula:
N48=sumproduct(sumif(indirect("'"&$B$378:$B$385&"'!A:A");A48;indirect("'"&$B$378:$B$385&"'!L:L")))
Where B378:B385 includes sheet names.
But problem with this is that column is hard coded, so I have to know that that value I am looking for is in column L. That wouldn't be show stopping problem on its own, but I have columns all the way to DR and copying formulas for each column takes a lot of time when I have to manually update each column. Just copying cell holds that L:L and doesn't change it.
So, in addition of getting values for specific product number I need to get values from specific column based on column header.
I was wondering if it is possible to get the SUM function to:
1) Add numbers in cells that contain letters or no letters.
2) If there are brackets that cell would be subtracted from the total, again ignoring any letters.
For example:
A1 = 3 ABC
A2 = (3 ABC)
A3 = 4
3 ABC + (3 ABC) + 4 = 7
I need to compare two columns A and B with a result in column E. BUT I don't want the result to be added together. ( since it's receipt numbers ) SO my formula is incorrect I need a formula that will show the receipt numbers next to each other divided by a comma or forward slash...
View 7 Replies View RelatedI am trying to get result in a column based on contents of previous 4 columns. For example as per table below, if there is value 1 in either of first 4 columns of same row, I want to display A in column 5. As first 4 columns in row 2 to 4 contains 1, result is A. If there is any 2 in first 4 columns, I want to display B. If there are both 1 and 2 in any first 4 columns, I want to display C. If there is 3 in any of first 4 columns, I want to display D. And if all 1, 2 and 3 are in any of first 4 columns, I want to display E.
NY1
NY2
NY3
[Code]....
I keep getting an application error, in debugging the underlined line is the source.
Sub blank()
Dim c As Range
For Each c In Range("C1:C100")
If IsEmpty(c) = True Then
c = Range("c").Offset(0, 1) - Range("c").Offset(0, -1)
End If
Next
End Sub
I'm trying to complete my if condition formula, wherein I've stuck between, how I need to complete, here is the attached one.
The IF formula should take, all 'A,B,C and D columns in result.
Book1.xlsx