this formula works but returns #N/A when the result is false, how can i get rid of N/A but replace with 0.00 even though i have 0.00 as false
=IF(VLOOKUP(A10,Down!$F:$H,3,0)="No",SUMPRODUCT(($A10=Downloads!$F$7:$F$3823)*(CT!E$9=Downloads!$A$7:$A$3823),Down!$D$7:$D$3823),"0.00")
I am still haveing problems with my sum product I'm trying to total Row E below, I know I can do this with sumif but I was trying sumproduct to read when the file was closed.
Manchester United .......
I want to use a dynamice range within a SUMPRODUCT, at the moment it looks like this but displays a bit FAT #N/A ....
View 9 Replies View RelatedSome reason my sumproduct formula returns #Value!
=SUMPRODUCT((Data_2005!$A$2:$A$170=A$2)*(Data_2005!$F$2:$F$170=$A5)*(Data_2005!$S$2:$S$170))
wb is attached (stripped down for upload)
I'm a big user of sumproduct but i have tried many variations on the following
=SUMPRODUCT((R9:R14="Sales Revenue")*(S9:S14)) without success.
If the data is clean ie does not contain # div/0 then i can get a fine result.
With a #div/0 then the result is #div/0. Can someone please tell me how to exclude #div/0 from the calculation please. I have searched several boards and cannot find an answer, but i'm sure its simple.
I have sumproduct formula that returns #N/A error and I'm not sure why
=SUMPRODUCT((YTD!$A$2:$A$2599=B$10)*(YTD!$P$2:$P$2599=$Q19)*(YTD!$E$2:$E$2599))
If I narrow the range from $939 to $1093 then the formula works.
But that is only evaluating 1 unit of 10
As I add worksheets to the workbook and update the unit numbers in B10, the entire range needs to be evaluated for matching criteria.
workbook is way too large to upload.
I'm not sure what I'm doing wrong with this formula in Excel 2003. I figured out how to do it in Excel 2007 using the SUMIFS statement, but alas Excel 2003 won't take a SUMIFS statement.
I have data in a column, J of Worksheet B that I need to add based on 2 conditions. The first conditions are in cells AJ6 to 8 on Worksheet A. The second condition must be matched from Column A of Worksheet B to the same condition in Column F on Worksheet A.
I’m using sumproduct to count the occurrences in a column based on 2 criteria. The formula is:
=SUMPRODUCT((D6='[BillPaymentTransactions.xls]2+ per Day'!$F$2:$F$4144)*('Exception Region V2'!$G$6='[BillPaymentTransactions.xls]2+ per Day'!$B$2:$B$4144)*('[BillPaymentTransactions.xls]2+ per Day'!$L$2:$L$4144>0))
The formula works when the array is less than about 3150 rows but goes into error when I use 4144 row range.
I am doing something dumb or does Excel not handle more than 3150 rows for the sumproduct function?
My SUMPRODUCT formula is returning 0 instead of expected results
=IF(ISERROR(SUMPRODUCT((WOR_Data!$A$2:$A$429=$A7)*(WOR_Data!$E$2:$E$429=$L7)*(WOR_Data!$K$2:$K$42))),0,SUMPRODUCT((WOR_Data!$A$2:$A$429=$A7)*(WOR_Data!$E$2:$E$429=$L7)*(WOR_Data!$K$2:$K$42)))
I have verified that all criteria match criterion for spelling, case, length(trailing spaces). All fine. First comparison is unit, second comparison is account description, 3rd argument of course column to be summed.
If I take out the error handler, I receive #VALUE! error
I'm trying to sum cells in a column that meet the following criteria: If the first character of the cell = "V" then sum the last two characters in the same cell. I.e., if A4 = "V12" and A6 = "V10", then I need the formula to return the total 22. All other cells, whether blank or starting with a different letter need to be ignored. My attempts have failed, including this last one that returns a #VALUE error.
=SUMPRODUCT(LEFT(A1:A10,1)="V")*(MID(A1:A10,2,2))
I've written a sumproduct formula, which does what I want it to do; but it returns a zero in false condition, instead of a blank. I've tried several things, but don't seem to be progressing very far. Here's the formula that I ended up with.
View 9 Replies View Relatedwhats happening to my workbook. On a worksheet called Data, i'm pulling in a lot og data from a database. Then on another worksheet i'm looking for certain things on the data sheet and counting how many there are.
This all goes along find until i close the workbook, and then re-open.I click the automatically update button that appearsand once it finishs updating all my values are replaced with #Value.
This is the formula i'm using.
= SUMPRODUCT(--(Data!$X$1:$X$49871="4")+(Data!$X$1:$X$49871=4),--(Data!$M$1:$M$49873="FTS-Unix"))
I am using the formula =VLOOKUP(F4,Scoring!$B$3:$C$66,2,FALSE) in column 'G' to return values from another sheet, 'Scoring', if column 'F' has a name in it the value is returned. The problem is if column 'F' is blank the formula returns ### and I cannot SUM column 'G'.
View 6 Replies View RelatedI have a vlookup formula for a table (attached), where for some reason, I cannot get rid of the #N/A value that is returned. I am referencing on the first sheet the 'No." column, and in checking for that number in the second column, am wanting to put the value in the 'moldules' column. I have tried converting the reference cells to text, numbers, have done =LEN to look at character counts, etc etc. I have also tried to build a simple dummy vlookup on a different set of data. The file is in Excel 07.
View 4 Replies View RelatedI want the A column to find it's match in the G column and place the corresponding number from the H column in the the B column. See attachment. formula is so basic: =VLOOKUP($A2,G1:H8806,2)
View 2 Replies View RelatedI have a problem with a spreadsheet that has three tabs. In Sheet1 is the first set of values and in Sheet2 is the second set of values. My boss wants me to make a third tab which pulls items from both sheets. He wants is so that any items from Sheet2 that AREN'T on Sheet1 are listed in the 3rd sheet. If they ARE listed on Sheet1, it returns a blank space. I can get it to return a blank space but every other value it pulls (In other words, values that are not on both sheets) returns a N/A instead of the value itself. Attached is the spreadsheet with just the values. Here is the formula I use in the 3rd tab to pull the info:
=IF(VLOOKUP(Sheet2!$A3,Sheet1!$A$1:$A$1044,1,FALSE),"",Sheet2!$A3). Do I just use regular lookup or MATCH instead of VLOOKUP.
Using the following formula, =VLOOKUP(A232,'[HEALTHLINK SPIFF 4-27-06.xls]Rep Total'!$A$2:$D$279,4,FALSE). returns #N/A in some cases - I would like it to return the value of Zero since I need to total the results column
View 5 Replies View RelatedI am attempting to use Vlookup to reference data in another file. if I use the vlookup function it works just fine UNTIL i add data to the referenced file. Then the vlookup never finds the new data. example in the file "TOLA" which references the file "INVENTORY MASTER":
Formula entry:
=IF($B25="","",VLOOKUP($B25,'[INVENTORY MASTER.xls]INVENTORY'!$A$4:$L$3356,3))
Now, if the data 031110 is entered in B25 of the current sheet, and 031110 is in the A column of sheet INVENTORY MASTER.xls, the proper data appears. (Data from a couple of columns to the right as expected)
Now then, I have closed both INVENTORY MASTER and NOLA. Now I reopen INVENTORY MASTER and make additions to the sheet, save it and close it. Lets say I added items up to 03318, and there is valid data in the columns to the right (B through J). I save and close INVENTORY MASTER....
How to make vlookup work right? I have tried it once and it worked but I can't get it ot work again.
I changed the format to text for the data I using and the data I looking in to see if that would fix the ref# or N/a error.
Is the formatting one possible issue?
I am slow to vlookup but I used the formula as
1. the lookup value is the serial #
2. the table_array is the entire worksheet that I am searching in - or should I just use the column that hold the values I am looking for?
3. the column_index_num is ??
4. [range_lookup] is FALSE.
I use a lot of VLOOKUP formulae in the sheets i put together and, despite both the lookup value and table array being in the same format (usually text format), i often get an #N/A being returned.
Here's the fun part... if i then do something simple like access the lookup value cell (either by double clicking or pressing F2) and then hit return, then the vlookup calculation suddenly returns the correct value.
I'm convinced it's something to do with the way the cells are formatted but can't work out what.
I have an issue using the average formula (example attached). I need to calculate the average grade of a group of students. I have used VLOOKUP to convert grades to numbers. Then averaged these results and converted back. It appears to work for most results, but some are not working. I have messed about with cell formatting etc, but cannot seem to figure out why its not working for some rows but does for other rows?
View 9 Replies View RelatedLooking for some help to figure out what is causing our problem. My friend has created the attached excel sheet in Excel 2003. The issue is that the a vlookup does not seem to be finding the correct line for the value from the lookup table when it is returned twice.
Let me explain - The details are contained in the attached workbook. There are three sheets in the workbook - NH3Curve, Samples and Qvalue table.
On the Samples sheet, in cell C12 and C13 you can enter varying values. Go across to F12 and F13 and you will see that they both have the value 22.1. This is where the issue occurs - in cells G12 and G13 the lookup value should be the same - but it is not. G12 is actually returning the value for 22.0 not 22.1. (lines 173 and 174 on the Qvalue sheet). We cannot ferret out why this is happening.
Any help would be greatly appreciated. Sometimes when you look at something you can't see the obvious, so I hope it is that simple.
In this sample below, I need to extract all matches for my look up value. Where I extract the data to is not important because it will be used as informational data in user forms. Basically, I have 670 rows that make up this table...this table is static (never changes). Each row represents a unique combination for achieving the value on the left.
To take it a step further, I would like the ability to deviate from the lookup return...in other words, force the return to be one row down, or one row up (this would satisfy my first requirement as well). I tried offset with vlookup, but I cannot make that do anything useful. I used match to get the row number of the return, but I don't know what to do with that row value now that I have it sitting in a cell in order to accomplish this. I was thinking I could use an offset formula with the cell's value to get this done, but I could not figure out how without doing it in VBA.
In the end, I will present this data on a userform...first will be the actual vlookup returns, then the user will have an option to select the next row down if they want (same look up value if one exists) or up (next higher value).
If possible, I would like the data lookups to be accomplished without VBA.
This is an extremely large working application, (about 17MB so far), lots of VBA coding and logic applied. This problem is a result of a request from the users of this application.
Here is a sample of what I am looking at.....
=IF(LEN(G6),VLOOKUP(IF(ISNUMBER(G6+0),G6+0,G6),HistoryTable,4,0),"")
I would like this/a formula to return nothing when the cell in "HistoryTable" is blank. Right now it is returning a zero.
I have a sheet that uses vlookup when the lookup returns #na error how can i conditional format these cells to so text is same as background
View 9 Replies View RelatedI have a formula that references another worksheet. Using the VLOOKUP function, it works great, except if the data on the other worksheet has a blank cell, it then returns a 0 (zero). Within the formula below, cell E10 is my "unique key" and is the only raw data within this spreadsheet. All other cells are strictly formulas. This formula I am using below works perfectly if there is complete data, but that is not always the case. =IF($E10="","",IF($E10="~ None ~","",VLOOKUP($E10,Projects!$F$3:$T$226,5,FALSE)))
View 8 Replies View RelatedI'm used to using the VLOOKUP Function a lot, and up to now it has always worked fine.
Instead of returning the value of the looked up cell (text) as it usually does it seems to be returning a number, which has something to do with the row number of said cell.
I copy and paste a formula between sheets and it does the same so I'm pretty sure it's not something in the formula.
In the attached spreadsheet I'm using VLOOKUP to create a cross reference between worksheets JS and ITEM. If you will look at the ITEM worksheet cell reference H13 & H14. The correct value for H13 should be AMC, not 729. Is there a way to use the value in the Class column and Item ID column in combination to get the value AMC? Would MATCH & INDEX work? I'm not familiar with Match & Index. I'd appreciate some help here. I've got 15,404 records to evaluate this way.
View 14 Replies View RelatedLet's say I have a standard Vlookup formula entered in cell C2
Code:
=Vlookup(A2,Sheet2!$B$2:$C$10000,2,0)
For that formula there may be 100 matches found in Sheet2, each with a different return option and obviously the above formula only returns data from the first found match.
Is there some way to drastically change that simple formula in VBA script to ...
1. Auto fill formula down 100 rows & return all possible return options upon match and not just the first return given upon the first found match
2. Make the lookup value be the A cell in the active row
Code: =VLOOKUP((LEFT(C4,6)),'Data from 7500'!$B$16:$G$195,6,TRUE)
And it works great, except that the data returned is off by one row. For example, the correct value for the sample name in B107 is located in G107, but the formula returns the value in cell G106. I've tried changing the TRUE to FALSE and that returns #N/A.