I'm a big user of sumproduct but i have tried many variations on the following
=SUMPRODUCT((R9:R14="Sales Revenue")*(S9:S14)) without success.
If the data is clean ie does not contain # div/0 then i can get a fine result.
With a #div/0 then the result is #div/0. Can someone please tell me how to exclude #div/0 from the calculation please. I have searched several boards and cannot find an answer, but i'm sure its simple.
I am still haveing problems with my sum product I'm trying to total Row E below, I know I can do this with sumif but I was trying sumproduct to read when the file was closed.
Manchester United .......
I want to use a dynamice range within a SUMPRODUCT, at the moment it looks like this but displays a bit FAT #N/A ....
View 9 Replies View Relatedthis formula works but returns #N/A when the result is false, how can i get rid of N/A but replace with 0.00 even though i have 0.00 as false
=IF(VLOOKUP(A10,Down!$F:$H,3,0)="No",SUMPRODUCT(($A10=Downloads!$F$7:$F$3823)*(CT!E$9=Downloads!$A$7:$A$3823),Down!$D$7:$D$3823),"0.00")
Some reason my sumproduct formula returns #Value!
=SUMPRODUCT((Data_2005!$A$2:$A$170=A$2)*(Data_2005!$F$2:$F$170=$A5)*(Data_2005!$S$2:$S$170))
wb is attached (stripped down for upload)
I have sumproduct formula that returns #N/A error and I'm not sure why
=SUMPRODUCT((YTD!$A$2:$A$2599=B$10)*(YTD!$P$2:$P$2599=$Q19)*(YTD!$E$2:$E$2599))
If I narrow the range from $939 to $1093 then the formula works.
But that is only evaluating 1 unit of 10
As I add worksheets to the workbook and update the unit numbers in B10, the entire range needs to be evaluated for matching criteria.
workbook is way too large to upload.
I'm not sure what I'm doing wrong with this formula in Excel 2003. I figured out how to do it in Excel 2007 using the SUMIFS statement, but alas Excel 2003 won't take a SUMIFS statement.
I have data in a column, J of Worksheet B that I need to add based on 2 conditions. The first conditions are in cells AJ6 to 8 on Worksheet A. The second condition must be matched from Column A of Worksheet B to the same condition in Column F on Worksheet A.
I’m using sumproduct to count the occurrences in a column based on 2 criteria. The formula is:
=SUMPRODUCT((D6='[BillPaymentTransactions.xls]2+ per Day'!$F$2:$F$4144)*('Exception Region V2'!$G$6='[BillPaymentTransactions.xls]2+ per Day'!$B$2:$B$4144)*('[BillPaymentTransactions.xls]2+ per Day'!$L$2:$L$4144>0))
The formula works when the array is less than about 3150 rows but goes into error when I use 4144 row range.
I am doing something dumb or does Excel not handle more than 3150 rows for the sumproduct function?
My SUMPRODUCT formula is returning 0 instead of expected results
=IF(ISERROR(SUMPRODUCT((WOR_Data!$A$2:$A$429=$A7)*(WOR_Data!$E$2:$E$429=$L7)*(WOR_Data!$K$2:$K$42))),0,SUMPRODUCT((WOR_Data!$A$2:$A$429=$A7)*(WOR_Data!$E$2:$E$429=$L7)*(WOR_Data!$K$2:$K$42)))
I have verified that all criteria match criterion for spelling, case, length(trailing spaces). All fine. First comparison is unit, second comparison is account description, 3rd argument of course column to be summed.
If I take out the error handler, I receive #VALUE! error
I'm trying to sum cells in a column that meet the following criteria: If the first character of the cell = "V" then sum the last two characters in the same cell. I.e., if A4 = "V12" and A6 = "V10", then I need the formula to return the total 22. All other cells, whether blank or starting with a different letter need to be ignored. My attempts have failed, including this last one that returns a #VALUE error.
=SUMPRODUCT(LEFT(A1:A10,1)="V")*(MID(A1:A10,2,2))
I've written a sumproduct formula, which does what I want it to do; but it returns a zero in false condition, instead of a blank. I've tried several things, but don't seem to be progressing very far. Here's the formula that I ended up with.
View 9 Replies View Relatedwhats happening to my workbook. On a worksheet called Data, i'm pulling in a lot og data from a database. Then on another worksheet i'm looking for certain things on the data sheet and counting how many there are.
This all goes along find until i close the workbook, and then re-open.I click the automatically update button that appearsand once it finishs updating all my values are replaced with #Value.
This is the formula i'm using.
= SUMPRODUCT(--(Data!$X$1:$X$49871="4")+(Data!$X$1:$X$49871=4),--(Data!$M$1:$M$49873="FTS-Unix"))
A web query I am trying to use to bring an online data table into my worksheet is broken. Now, instead of returning the data table nicely into my worksheet, it imports the code of the webpage, instead, and turns my worksheet into a mess.
The query used to work but there was recently an "upgrade" to the program that populates the web table and the query no longer works and just returns the code for the page, instead. I can see the html code for the table in all of the code it returns but I really need the table to import cleanly into excel.
I can't talk to the people who changed the web program.
I have a nice case to prepare and need weekly riskfree interest returns on the UK treasury bond. Right now I have daily returns and want to convert them into weekly. The problem is, weeks do not always contain five trading days. How can I turn my data into weekly average riskfree interest returns?
******** ******************** src="*********>*********>Microsoft Excel - UK interest daily.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCD1DateInterest rateweekday 24-Jan-889.871 35-Jan-889.992 46-Jan-8810.053 57-Jan-8810.094 68-Jan-8810.135 711-Jan-8810.051 812-Jan-8810.072 913-Jan-8810.283 1014-Jan-8810.114 1115-Jan-889.985 1218-Jan-889.871 1319-Jan-889.962 1420-Jan-889.913 1521-Jan-889.864 1622-Jan-889.715 1725-Jan-889.71 1826-Jan-889.762 1927-Jan-889.693 2028-Jan-889.564 2129-Jan-889.555 221-Feb-889.741 232-Feb-889.622 243-Feb-889.643 254-Feb-889.684 265-Feb-889.755 278-Feb-889.931 289-Feb-889.852 UK interest daily [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
In my current worksheet, IF(0 = "CS") returns TRUE, but on any other file this same argument returns FALSE. The cells' formats are both general. I want it to be FALSE.
View 2 Replies View RelatedI have a cell that contains several carriage returns. How do I extract data from between 2 carriage returns?
View 5 Replies View RelatedI have a report I am producing that returns some information regarding accounts we deal with. it may be best to explain what I have allready. Firstly I have The total occurences in a specific month and year using the following formula.
View 4 Replies View RelatedThis code (partial) was written to interrogate a database. Cell "A2" of another tab contains a Part Number to be sought.
Target = Range("A2")
Sheets("Kanban Data").Select
Dim Nrow As Range
Dim N As Integer
On Error Resume Next
With Sheets("Kanban Data")
Set Nrow = .Columns(2).Find(What:=Target, After:=.Cells(3, 2), LookIn:=xlValues, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False)
If the Find expression (as pulled down from the Edit menu) is empty, then inserting a Part Number in A2 and executing the macro finds the correct record and returns the its correct row number (N, as defined afterwards in the code). Then, changing the Part Number in cell A2 and executing a new search returns the SAME row as the previous search, despite Target being equal to the new sought after value.
Macro that will look for #N/A in Col A and if found then msgbox returns the data in Col B, so as example shown below we can see there are 2 #N/A, so the msgbox should return "DAI.345, BBHT.WERFGT".
my real data will consist around 800 rows....
I have a sheet connected to external SQLSERVER data.
One of the columns includes a formula, but the formula is not evaluated but shown as text.
My challenge is making it evaluate (without using excel tricks like replace equal sign with equal sign or clicking each cell and approve it)
I tried going down the road of concatenating char(10) or char(13) to the formula string but no success.
I am using the following code to re-name filtered data in column 4 of my worksheet, but I am running into an issue when the Autofilter returns only one row of data. The End(xlDown) is selecting a range that extends to the last row of the worksheet (1,048,576).
Code:
rfiltered.Cells(1, 3).Select
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = "Receivables"
Selection.Copy
Range(Selection, Selection.End(xlDown)).Select
ActiveSheet.Paste
How can I write the code so that in the event there is only one row of data, it selects just that row for the paste (and yes it would be redundant to paste over the same value) and then continues on? I would usually use a Cells(Rows.Count, x).End(xlUp).Row to find the last row of data, but I don't think that will work in Autofilter mode.
I have a three or four letter abbreviation of a last name in A1. Column C contains a list of Last Names; column D contains a list of corresponding First Names; and column E contains a formula concantenating the First Names and Last Names from columns C & D.
I have the following formula in B1:
=VLOOKUP(A1,C1:E44,3,1)
I am attempting to match up the three or four letter abbreviation with the concatenated list to return the full name (First and Last) in cell B1, however, I'm not getting the desire result. I keep getting the name in the row just above the name I want.
If you have used Excel to download data from Bloomberg, you probably noticed that the function "BDH" can return an array of variable length. I was trying to design such a function but could not find a way.
The basic feature of a function like this is that it can be entered like an ordinary formula (not an array formula), but it returns multiple values. The values will be displayed in the range that has the formula as its top left corner.
I have created a monitoring spreadsheet for a public School system. It pulls data from 5 seperate excell files. however when a lookup value that is further down the list on the largest table it returns no data. other cells can lookup that same number and return correct information but from a different table.
The table that has issues is A1 - Y12430.. if the lookup value is low in the first few thosand rows it works.. but if thye value is in say row 9,000 it can not locate it..
I setup this function to pull my staff's schedule an auto generate the forms i need however the lookup function works properly sometimes and improperly others i checked the syntax and it is correct how ever the wrong data is continually returned. I have attached the file if anyone can help. the VISUAL PLAN tab is the one contaning the formula and it pulls data from PLAN, CURENT SCHEDULE, AND CATAGORY SUMMARY however the only formulas hat i have a problem with are the ones referencing CURENT SCHEDULE.
View 9 Replies View Related Is there a way to delete excessive carriage returns at the beginning of data. I pull reports from a SharePoint list where submitter entries often often contain multiple carriage returns before the text or data. I use ASAP utlitily to clean out excessive spaces before and after data, but I don't find a way to remove these multiple carriage returns so that the text entries are easily viewable when row-height is less than gigantic. Cells with extra carriage returns before the text entries end up looking like the following:
___________________________________________________________________
| |
| |
| |
| |
| Product page for CQ1-14047.LA is missing Swindex section (Core Drivers). |
|__________________________________________________________________|
a
b
c
d
1
monday
tuesday
wednesday
thurs
2
ted
bill
frank
mary
[Code] .......
We use excel for scheduling purposes and each and every day we fill out a floor chart with who is working that day. As it stands now we have to print out a template and hand write all names or type them in and print it out. What I would like to try and do is define each set of names and allow for easy access to auto fill these names. I feel it needs to be a simple process as not all of our managers experienced in excel or formulas. What I would like to try an accomplish is in sheet 1 cell A1 to be able to create a drop list or formula that that would let me return all the names for a given day.
For the purposes of this discussion we can just define each list as the day that is the header ( IE A2:A4 on sheet 2 would be defined as "monday". Also, I already have the names autofilled based off of what the our schedule has. I'm curious if I could create a drop down list with each day of the week as an option, and if they select Tuesday it will then return all the names defined as Tuesday in a column below.And the next day be able to return Wednesday names and so on.
I'm not stuck on it being a drop down list. Maybe if they could just type and =(defined name) in the box above and it would return all the names.
I have tried an =(defined name) and it does return the value but only for the first cell and it has to be in the same row for it to return the name. Which doesn't work because I would like the names that are being defined on a separate sheet.
Say I have Source Workbook X 1, and Destination Workbooks X 4. The Source workbook contains a number of lookup values. I want the lookup values to be maintained in the single Source workbook, and I want this workbook to remain closed when the end users are using their Destination workbooks. It is critical that certain cells in the Destination workbooks have validated data in order for formulas and summarizations to be correct.
I'm happy if the Destination workbooks contain a lookup worksheet (perhaps hidden). In short, I'd like the contents from the Source workbook, Lookups worksheet, to just be replicated "as is" into the Destination workbooks, Lookups worksheet. I then want to do my data validation from that worksheet, which of course is open (data validation appears to only work with open workbooks).
I've investigated the techniques in this link: [URL]
Questions:
1) Are the techniques in that link about the best approach? i.e. an external link plus array formulas?
2) A blank cell in the source workbook (text column but formatted as General) is resulting in a zero in the external link. How can I make the external link exactly match the text as entered in the source workbook?
For instance, in travels.xls a table in the 'data' sheet lists destinations versus people and the data of travel.
What i'd like is to assign a macro that would have a breakdown of the number of travels per destination that month. Where there is no travel that month, that destination is omitted.
I can work out how to use SUMPRODUCT to produce the number of trips per destination within that month, but stuck as to how to get it to display it using a macro.
Should I use a loop to loop through all destinations, copy that information to the separate sheet and then another loop to delete destinations with zero trips?
I'm using the following formula to pick up data from another worksheet
=SUMPRODUCT(--(RawActuals!$A$1:$A$10000="jun"),--(RawActuals!$E$1:$E$10000=A236),RawActuals!$M$1:$M$10000)
It's picking up most of the data, but it's missing some - and it's to do with formatting of SOME of the data within the RawActuals sheet
212605Agency Staff - Professional & Other212701Staff Cost Tfr to Change Programme221112Property Rents - Passing Rent221310Hire, office/courtr'm/related eqpt
The 1st, 3rd and 4th lines are correctly picking up the data - but the 2nd is not. They are all set to the same number format.