worksheets("Demorecords").Range("k2").formula = _
"=IF(AND(DAYS360(N2,Current_Date)>" & _
Combobox1.Text "!$B$6,DAYS360(N2,Current_Date)" & Combobox1.Text "!$B$7,"Pending Delete","Persistent"))"
A error box says compile error: expected end statement and then highlights this part (red)
I am getting this error and where th If not starts its is in red showing that is where the issue is:
HTML Code:
Sub RemoveRows()
Dim LR As Long, i As Long
Dim ws As Worksheet
Set ws = Worksheets("100 Airports")
LR = Range("B" & Rows.Count).End(xlUp).Row
For i = LR To 10 Step -1
[Code] .....
I have two worksheets named "Data" and "Product". I want to use the following macro to sort the records depending which sheet is active. If I am in the "Data" sheet, it does the sort in the "Product" sheet? I was expecting it to ignore the second IF statement when I am in the "Data" sheet?
View 3 Replies View RelatedI am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6()
Cells.Select
selection.Copy
selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
For which I get 'Compile Error - Expected Function or Variable'
Need the right direction to stop the error 'Compile Error Expected Function or Variable' appearing. I have both of the following codes in a module. The AddNewTenancy works perfectly but the EditTenancy comes up with the following error.
Both the Userforms exist so I know it's not that.
Sub EditTenancy()
EditTenancy.Show
End Sub
Sub AddNewTenancy()
NewTenancy.Show
End Sub
i'm trying to call a function from another one, i'm getting this error 'Compiler error: = expected' but i don't know the reason, the functions simply take some values an store them in an here is the
Dim productos(19, 3) As String
Sub agregarProducto(ByVal descripcion As String, ByVal modelo As String, _
ByVal precio As String, ByVal unidad As String)
Dim r As Integer
For r = 0 To 19
If productos(r, 0) = "" Then
productos(r, 0) = descripcion
productos(r, 1) = modelo
productos(r, 2) = precio
productos(r, 3) = unidad
End If
Next
End Sub
Sub agregarProductoTelas()
Dim descripcion, modelo, precio, unidad As String
If Selection.Column = 1 Then
descripcion = Selection. Offset(0, 0).Value
modelo = Selection.Offset(0, 0).Value
precio = Selection.Offset(0, 3).Value
unidad = Selection.Offset(0, 2).Value
agregarProducto(descripcion, modelo, precio, unidad) 'error happens right here
MsgBox (descripcion)...
I have a VBA shell script that worked just fine on another computer, but now it won't run.
The code that won't execute is:
[Code] ........
I have a macro that does a solver routine. I have another macro that runs this solver, then copies and pastes new inputs, then runs the solver, then copies the results and pastes them somewhere, then copies new inputs, etc. It is a long process and it worked fine a few days ago. Now when I run it, about 90% of the way through and then excel crashes. The error says:
Solver: An expected internal error occurred, or available memory was exhausted.
What can I do?
I'm trying to use the "clear contents macro" for merge cell, but I keep receiving this "compile error : Expected End Sub" error.
FYI, I have named my merge cells to "myMergedCells"
[Code] .....
The following code returns an error saying "expected an array" even though I define the array at the start of the code? Why is it doing this?
Sub copydays()
arrDays = Array("Monday", "Tuesday", "Wednesday", "Thursday", "Friday")
sglArrPos = 0
For sglLoop = 1 To 5
Sheets(arrDays(0)).Select
Cells.Select
Selection.Copy
sglArrPos = sglArrPos + 1
Sheets(arrDays(sglArrPos)).Select
Cells.Select
ActiveSheet.Paste
Next sglLoop
End Sub
I have a formula, that is return a #Value! error for the blank cell that are referred to in the formula. How do I get rid of the #Value! error when I fill down? The formula works great.
=IF(G21>0,IF(A21+182
I'm working on a spreadsheet that i have a long if statement and it keeps till me i have a error. I stated reading and come to find out you can only have 7 statement.
=IF($R$6="X",VLOOKUP($A25,VISION,2,FALSE),IF($R$7="X",VLOOKUP($A25,VISION,3,FALSE),IF($R$9="X",[code]....
I am getting the Run-time error '380'. Could not set the value propery. Invalid property value.
I have a user form for data entry purpose which is working fine. Now, I am making a code for data editing purpose which pulls out data from the worksheet into the user form.
I am able to do this for text boxes and combo boxes that are not linked with each other. However I am getting a problem in the following case; I have a combo box and a text box that are linked to each other by combo box _change code which is below which may be the reason for the error I am getting for the next code...
Code:
Private Sub cmbColor_Change()
If cmbColor.Value = "Other" Then
lblColor.Visible = True
[Code]....
I attempted to initialize values on a few Dim statements, but got compile errors: "expected end of sentence".
VB:
Dim sumTtl As Currency = 0
Dim searchTxt = "West"
when i write the following line to open the recordset then it gives me syntex error.
rs.Open "select batchno from tblmain", cn, adOpenKeyset, adLockOptimistic, adCmdTable
and if i write the following line then it works fine.
rs.Open "tblmain", cn, adOpenKeyset, adLockOptimistic, adCmdTable
if Statement A: =IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12) works very well
if Statement B: =IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12) works well too
now I am trying to say
=IF('Input Page'!B36="yes",(IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12),(IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12))))
Basically, if B36 is yes, use If Statement B, otherwise IF Statement A. If I write Yes, I get a "Value" error, if I change the yes to 1, I get a FALSE error.
I have this line of code:
Code:
If Left(value.use_type, 1) = "D" Then
Where use_type is a field in a user form.
I am getting an "object required error"
experienced coder (not VBA) and I'm having trouble with a simple statement. No idea why it was working before and moving it to it's own Sub screwed it all up.
Sub InitialMessage()
On Error GoTo BadEntry
SiteTotal = InputBox("Enter the number of approved sites *Must be an Integer > 0*")
BadEntry:
Entry = "Bad"
Msg = "An error occurred!" & vbNewLine
Msg = Msg & "Make sure you enter a valid value in all the prompted Message Boxes"
MsgBox Msg
I am running a macro which filters a column to show only records with "#N/A" (ie an error), and copies these to another worksheet. As I am aiming for no errors, there will be occasions when there is no filtered data.
My problem is that, unless I use something like xlCellTypeVisible, when there is no data shown it still copies and pastes all the hidden records. And if I do use it when no filtered data, I currently get an error "No cells were found".
I have tried many iterations of code correction and i think i'm currently blinded by staring at it so long!
My current if statement reads as follows:
[Code] .....
I think I might need to use some sort of On Error Resume Next statement, but I have never used these before. When I tried adding that before the If statement, it just ignored the criteria and tried copying hidden rows - the exact opposite of what I want.
I'd like something that said, if this condition = error, skip over entire if statement and carry on with rest of the sub.
I have a Userform which has 2 textboxes. User enter his employee id on textbox1 then enters a valid break time code which are 1,2 and 3 on textbox2. If User typed 1 then first breaktime start time will be pasted on the worksheet. When User returns after break he then enters his employee id again and then type 1 to end his first breaktime, the end time will be pasted on the worksheet. My program works fine however, I am trying to place a code which will prompt the user to end his first break time before entering another valid break code. Kindly check my code below as I am receiving an error message. 'Run-time error 9' Subscript out of range. This thing is driving me nuts. Any advise or can you tweak my coding vba experts.
View 14 Replies View RelatedI keep a formula to many arguments error.
=if(C2="","X","", ), IF(h2="","X","", )
What I am trying to say is if cell c2 is populated enter a "x" and if h2 is populated enter a "x".
Excel 2010. Windows 7
Run-time error '-2147467259 (80004005)':
An unexpected token ""20*"" was found following "1' AND
PERIOD = LIKE*. Expected tokens may include: "". SQLSTATE=42601
code died at RS.Open SQL, CN
/////////////////////////////////////////////////////////
Sub GET_OSI
Dim sn as String, osi as string, saposi As String
[code]....
I get an application defined or object defined error at the select statement 1004...I know I know I shouldn't be selecting in code so I'll fix that but why can't I set the range?
NumRows = Sheets("Timelines").Rows.Count
LastColumn = Sheets("Timelines").Range("A1").End(xlToRight).Column
LastRow = Sheets("Timelines").Range("A" & NumRows).End(xlUp).Row
Sheets("Timelines").Range(Cells(1, 1), Cells(LastRow, LastColumn)).Select
TIA, Charlie Brown.
I ran into a screen update problem in a project I was working on and couldn't find a solution, so I wrote some test code in a new workbook as follows;
Sub Flkr()
'-------------------------
'Screen update test
'-------------------------
'Select sheet1
Sheets("Sheet1").Select
'Disable screen update
Application.ScreenUpdating = False
'Select sheet2
Sheets("Sheet2").Select
'display message
MsgBox "Why is the %&$@ screen updating?", vbCritical, "??????"
End Sub
Seems simple enough,eh?
When I step through this code the first statement works(sheet1 is selected)
The next statement is executed without an error, so I assume it works
The next statement sheet2 is selected, and the screen updates!
Sub SheetFinder()
Application.MacroOptions Macro:="SheetFinder", _
HasShortCutKey:=True, ShortcutKey:="G"
msg1 = "What sheet would you like to go to?"
msg2 = "I'm sorry, but that sheet could not be found."
On Error Goto NotFound
TryAgain:
prompt1 = InputBox(msg1, , "Template")
If prompt1 = "" Then
End
Else
Sheets(prompt1).Select
End If
End..........
In cell C34 I'm trying to duplicate the content in cell J70, but I don't want to show any content in C34 unless J70 is not blank.
I tried this formula in C34, but I keep receiving an error message:
=if(j70="","",(=j70)
I have some code below. I have error handling in place for when it tries to open a specific file. If it isn't there then user has option to continue and ignore this file, or browse and select a new one.
The problem is, when the user wants to ignore the file, the "Resume Next" continues to run the VBA assuming the file was ok i.e. the code after the line to open the file. What I would like is for it to skip the succeeding code and go to look for the next file.
Below is the VBA:
Code:
For i = 0 To 2 Step 1
'add in error handling for if the file is missing
On Error GoTo MissingFile
Workbooks.Open Filename:="\hbeu.adroot.hsbcdfsrootgb002hfcfinance01fnce" & qfolder & "Data" & qfile(i), UpdateLinks:=False, ReadOnly:=True
[Code] .........
Missing File:
qMissingPrompt = "There was an error opening data file. Click OK to browse or Cancel to ignore and move to next file"
qAns = MsgBox(qMissingPrompt, vbOKCancel)
'click cancel - ignore error and move onto the next file
If qAns = vbCancel Then
[Code] .......
So, where it says Resume Next, currently it will start running the following (after On Error Goto 0)
Code:
Set datawb = ActiveWorkbook
range("A2").Select
Do Until ActiveCell.Value = ""
etc.
What I would like it to do is go back to is to go to the next i
Code:
For i = 0 To 2 Step 1
Or even to go to the 'Next' statement at the end so that it moves onto the Next i and tries to open the next file.
I'm having problems implementing a Select Case statement. Keep getting case without select case at Case condition2.
Code:
Select Case Condition
Case condition1
If Cells(rsRow, rsCol).Value = "" Then
Cells(rsRow, rsCol) = TextBox2.Value
[Code] .......
I have a written the function below, but when ever I use it, and for example drag it across lots of cells, they all come up with the same value, and I have to manual click on each one and pres enter to get it to show the right value. I have tried searching but without much luck as I am not sure what I should be searching for. Using application.volatile doesn't.
Option Explicit
Public Function FirstLinePickUp(inputrow As Variant) As Variant
Dim n As Integer
Dim testcell As Variant
n = 0
testcell = ""
Do Until testcell <> "" Or ActiveCell.Column - n <= 0
testcell = Cells(inputrow.row, ActiveCell.Column - n)
n = n + 1
Loop
FirstLinePickUp = testcell
n = 0
testcell = ""
End Function
I have a macro that continues to tell me that an End With and/or End Sub is expected. I continue to add these statements in various ways, but the macro will not complete properly.
Here is the