Ignore If Statement If Condition Equates To Error?
May 6, 2014
I am running a macro which filters a column to show only records with "#N/A" (ie an error), and copies these to another worksheet. As I am aiming for no errors, there will be occasions when there is no filtered data.
My problem is that, unless I use something like xlCellTypeVisible, when there is no data shown it still copies and pastes all the hidden records. And if I do use it when no filtered data, I currently get an error "No cells were found".
I have tried many iterations of code correction and i think i'm currently blinded by staring at it so long!
My current if statement reads as follows:
[Code] .....
I think I might need to use some sort of On Error Resume Next statement, but I have never used these before. When I tried adding that before the If statement, it just ignored the criteria and tried copying hidden rows - the exact opposite of what I want.
I'd like something that said, if this condition = error, skip over entire if statement and carry on with rest of the sub.
I'm having a tough time writing a formula to return the min value for a particular item while ignoring blanks.
In the attached example, I'd like the result of cell E3 = 1 (the minimum for Texas). What the best formula to compute the min value for Texas (ignoring blanks)?
I've got a work book (2010 btw) with several tabs.
On tab 5 is an inventory list with "Stock Number and Nomenclature" merged in row A7-Q7 and down to row A23-Q23.
Beside each Item there are “Required Quantities (EA)" in Colum U7-U23. After an inventory is executed, The values are placed in Colum V7-V23 (INV).
Stock Number Nomenclature EA Inv 34419-43450 Mission Modu 1 “X”
After inventorying.... I need a formula that "compares the required quantities (EA) to the actual inventoried values (X)".
IF the actual inventoried quantities are equal to or greater than "Required Quantities" - Display Nothing in tab 6
IF the actual inventoried quantities are LESS than the "Required Quantities" - Display “Stock Number and Nomenclature" in tab 6 for a shortage list, ignoring the "blank cells".
So I highlighted bunch of cells where numbers are stored as text and chose "ignore error". But when I re-sort the list, the errors come right back again.
Is there a way to get them to stick so I don't have to keep choosing ignore error?
Is it possible to sort a worksheet and either ignore #N/A error or have it drop to bottom of sort. I'm sorting a table by the highest value in a column bit all of the rows with the #N/A error are shown before the rows I want to see.
i m trying to add values in different sheets though some of the values have a #n/A in them and i want to ignore this = SUM(Set1!D9,Set3!D9,Set2!D9). However Set1!D9 is an error and I would like to ignore this value!!
I need to get a subtotal of a range (eg: A1:A30), however some cells in this range have #N/A errors due to particular formulas they contain. I could go into these cells and add a formula which 'catches' these errors, but there are far too many given my current time constraints.
Is there any way to use SUMIF to add the cells which do not contain errors and skip the ones that do? (ie: SUMIF($A$1:$A$30,""&"Error Parameter")).
Columns:Clients first and last name. Case number Case type - Case type can be AAA, BBB, CCC, DDD, EEE, (and many more). Case outcome - Case outcome can be Granted (G) or Denied (D)
A case can be of type AAA, and be Granted. A case can be of type MMM, and be Denied. A case can be of type ZZZ, and be Denied. Etc...
I am trying to keep track of how many cases of each type have been granted and denied. If you look at the file i attached, you will see that the table is a list of clients, with different case types and different outcomes to their cases.
The problem i am having is that i need a way to have a two-condition statement as such:
if case type is "AAA" and case outcome is "G", then add 1 to a "AAA GRANTED" column on another sheet.,....................
I'm having a problem with negative values. Somehow if the pitchX is -11.1877, let's say, and it is the right value, the code will still perform the 2nd if statement, when it should not. Am I using the wrong data type? Or is there anything I'm missing out?
Dim pitchX As Double If pitchX > 10000 Then pitchX = pitchX / 1000 End If
If pitchX <> Range("C8").Value Then With Range("C8") .Font.Bold = True End With End If
I am attempting to create a multi condition IF statement for work. Essentially what we have is a column dedicated to the date in which a piece of equipment is supposed to go into service.
What we want to do is make it so that if the current date is 40 days past the scheduled in service date, a status column displays the term "Verify".
Additionally, if the scheduled in service date is 365 days from the current day, a status column should display the term "Future".
If it is any day in between the two, it should display the term "Active"
I have two seperate lines of code, one that covers verify and active and the other that covers future and active but I can't combine the two so that I have one function. The code I compiled is included below, any help would be appreciated.
I have a formula in a cell which attempts to grab a value on another sheet that's dynamically changing in real-time (it's a live stock price changing in realtime via DDE). My objective is to grab this current live stock price when it is between the times of 10:30 AM and 5:00 PM, bt as *soon* as it goes past 5 PM, I want this formula cell to display the very *last* (ie.the one just before) value it had just before the time rolled over past 5 pm.
I am using the formula below to count the occurences of relevant text strings (names) in a cell that can contain many separate strings. It works great. "References!$F$2:$F$34" contains my list of names and the formula returns how many occurences there are in each cell.
What i'd like to do know is work in a date criteria. Each name has an associated relevant date attached to it as does each cell that I am looking for these names in.
So...in english what Id like to do is alter my formula so that when it finds a text string that exists in "References!$F$2:$F$34", it then compares the associated date in "References!$G$2:$G$34" with the date associated with N3 which happens to be O3.
I am trying to pull certain members loads from our global design force spreadsheet and because of the naming convention we used for our structural members the 2nd to last character is unique to what I am looking for. I am trying to get a simple condition statement that will display the load only if the 2nd to last character of the name of the element is satisfied.
For Example, if "T" is what I am looking for then :
EDT4 will be true and give me the value accordingly D10T1 Will also be true and return me the value D10B2 Will not be true
I know how to use the Mid() and right() function, but I need to check the 2nd from the right.
I have created a spreadsheet which creates an average of feedback for trainers in a training company. The form adds up the feedback score into column L of the summary sheet and I have created a summary sheet which I want you use to calculate the average for each trainer.
I have cobbled together an array formula which creates the overallaverage for each trainer based on the named ranges entered via the form.
I have a spreadsheet for which I have to set up a formula to get the minimum value from a range of cells, but that range can include blank cells, errors (#DIV/0) and zeros, all of which I want to be ignored. I can work out how to ignore EITHER the zeros
(=MIN(IF(C10:G100,C10:G10)),
or the error cells
(=MIN(IF(ISNUMBER(C9:G9),C9:G9)),
How to exclude both. If I try to combine both of these exclusion criteria it doesn't work and I end up with the answer #DIV/0, which is one of the values I want it to ignore.
I have a formula, that is return a #Value! error for the blank cell that are referred to in the formula. How do I get rid of the #Value! error when I fill down? The formula works great.
I'm working on a spreadsheet that i have a long if statement and it keeps till me i have a error. I stated reading and come to find out you can only have 7 statement.
I am getting the Run-time error '380'. Could not set the value propery. Invalid property value.
I have a user form for data entry purpose which is working fine. Now, I am making a code for data editing purpose which pulls out data from the worksheet into the user form.
I am able to do this for text boxes and combo boxes that are not linked with each other. However I am getting a problem in the following case; I have a combo box and a text box that are linked to each other by combo box _change code which is below which may be the reason for the error I am getting for the next code...
Code: Private Sub cmbColor_Change() If cmbColor.Value = "Other" Then lblColor.Visible = True
I have in column D starting D9, I have numbers starting at 1, and may finish at 100. But there could be duplicates, 1,2,3,3,4,5,6,6,7,7,8,9,10,10,11,12,13,.........
I would like to only copy the range D9 to H (End of column D), ignoring all the duplicate numbers, to another sheet.
So on the second sheet, it would be 1,2,3,4,5,6...... with the data copied from E,F,G and H.
When the whole row in excelsheet is full for particular date that means all the values of columns (Legal Charge,GA and DNM) have been entered for particular date then display an error message if the another user tries to enter the values for the same date .
It means the user can enter the values for same date only if values of Legal Charge,GA and DNM are empty,otherwise an error message should pop up.
Basically, if B36 is yes, use If Statement B, otherwise IF Statement A. If I write Yes, I get a "Value" error, if I change the yes to 1, I get a FALSE error.
