IF Statement Returns Either Value Error Or False
Jan 7, 2010
if Statement A: =IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12) works very well
if Statement B: =IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12) works well too
now I am trying to say
=IF('Input Page'!B36="yes",(IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12),(IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12))))
Basically, if B36 is yes, use If Statement B, otherwise IF Statement A. If I write Yes, I get a "Value" error, if I change the yes to 1, I get a FALSE error.
View 2 Replies
ADVERTISEMENT
Dec 29, 2008
I have a worksheet called "Raw Data" where in columns J, I and G contain values. I would like to write a formula whereby if all 3 conditions are met, it will count the number of values found in column C.
I've tried to write an IF statement but it just returns FALSE, despite the result being true. Need the right combination of IF/AND statements that would do this?
=IF(AND('Raw Data'!$J:$J="Maintenance",'Raw Data'!$I:$I="Open",'Raw Data'!$G:$G="1-2008"),COUNT('Raw Data'!$C:$C)). I've tried to attach the workbook, but there's a problem with uploading attachments I think. Sorry if my explanation is unclear.
View 4 Replies
View Related
May 26, 2006
In my current worksheet, IF(0 = "CS") returns TRUE, but on any other file this same argument returns FALSE. The cells' formats are both general. I want it to be FALSE.
View 2 Replies
View Related
May 7, 2009
I have calculated the t values then i have three tables for 3 confidence levels, 0.01, 0.05,0.1 in which I compare the t value with the value from the
t-test table. If the t value is larger it returns a 1, if not a 0. This works fine.
To summarise the information I have a final table which I wish to return the highest significance of the given t value.
I am using this
=IF((G53=1),0.01,(IF(G44=1,0.05,(IF(G35=10,0.05,"none")))))
the problem I have is it always returns 0.01 even if g53=0. If i remove the formula from g53 and replace it with a 0, it returns 0.05 instead (even if g44 is retruning a 0).
I have considered copy paste values and doing this but that rather removes the automation aspect of the spreadsheet if I need to make adjustments.
View 4 Replies
View Related
Oct 18, 2007
I've been asked to adjust some thing with a worksheet someone else created. On the sheet labeled "Criteria" there is a list of dates and some formulas that use these dates. I can't figure out why the result of the formula is a number, i.e "0"; I thought it is supposed to return "TRUE" or "FALSE". If I insert a new sheet, within the same workbook, and insert the same formula, I get "TRUE" or "FALSE". For some reason, the "Criteria" worksheet doesn't return "TRUE" or "FALSE", it returns numbers. I just need to know why this is happening so I can replicate it in the new workbook I'm creating.
View 2 Replies
View Related
Jan 8, 2007
I've written a sumproduct formula, which does what I want it to do; but it returns a zero in false condition, instead of a blank. I've tried several things, but don't seem to be progressing very far. Here's the formula that I ended up with.
View 9 Replies
View Related
Sep 23, 2007
I have some problem with my data here. I have created a formula to compare the numeric value between the column. I want to have the results in the column but the results I have is wrong. Did i did something wrong with the formula?
I wanna compare the value from A2 and C2, B2 and D2. If the results is correct, then is will display true value in e2 else will display false value in e2.
when i compare 2.3oz and 2.25oz, the value displayed is true which is wrong, it should display "false"
I have attached the file here...
View 3 Replies
View Related
Jun 18, 2007
I have the following cells set up in a worksheet.
I have the following formula set for each of the cells -
=IF(U5>1,U5-1,T5)
=IF(T5>1,T5-1,S5)
=IF(S5>1,S5-1,R5) and so on.
Serial No.1 Serial No.2 Serial No.3 Serial No.4 Serial No.5 Serial No.6
#VALUE!#VALUE! #VALUE! #VALUE! 1005 1006
The T5, S5 and R5 are (I thought) the "False" value which would be returned, but all I am getting (if for example T5 was blank) is #Value
View 9 Replies
View Related
Jan 22, 2014
I've created an equation but when it's false it returns a "0" I tried an IFERROR with no luck.
=IFERROR(IF(AND(C6>="",E6=""),"update system",),"")
View 3 Replies
View Related
Aug 5, 2014
The formula I am having issues with is:
=IF(L14="YES",IF(B14="","",NETWORKDAYS(B14,IF(AH14="",TODAY(),AH14),IF(L14="NO",NETWORKDAYS(B14,IF(V14="",TODAY(),V14))))))
I'm looking for formula to return a value based on the amount of networkdays between 2 dates.
Column L has a drop down for
"YES" and "NO"
If "YES" is selected then I need the formula to subtract AH from B (if B is blank I don't want the formula to return anything)
if AH has no date then I want it to use todays date.
If "NO" is selected then I need the formula to subtract V from B (again, if B is blank I don't want the formula to return anything)
if V has no date then I want it to use todays date.
The formula seems to work for everything as it is EXCEPT when L is "NO" it only return FALSE.
View 3 Replies
View Related
Aug 22, 2014
On sheet 3 column d i have a vendor number. I am trying to create a formula in column M (same sheet) that will say "True" if the vendor number in column d is also listed on sheet 2, column A (Rows 2-148)
View 2 Replies
View Related
Nov 24, 2011
=IF($T$50=Controls!$B$2),"GO",IF(AND($E$52=3,Controls!$B$3=1.3,$U$1=8,$AB$1>=Controls!$B$2),"GO","")))
Why do I get a FALSE statement with this formula when T50=1, i want it to be blank.
View 9 Replies
View Related
Jun 16, 2012
Write if statement or any other formula: if cell C3 is less then 0 then "over due", if = 0 then "due" and if more then zero then "not due yet" otherwise preferably nothing, because that would mean that the cell is empty.
View 6 Replies
View Related
Mar 31, 2014
Column A: T/F
Column B: True/False
Here's what I want in a sentence: If one of the cells in grouped row is "T", column B = True, if not then column B = False.
(row groups are separated by a blank row)
Example)
Col A,Col B
TTRUE
FTRUE
[Code] ....
I came up with following formula:
=IF(MATCH(TRUE,INDEX(ISBLANK(A1:A17),0),0)>MATCH("T",A1:A17,0),TRUE,"")
It checks to see if blank cell is found before "T" but it doesn't look rows above.
inincubus.grouprows-1.xlsx
View 3 Replies
View Related
Feb 3, 2014
I'm trying to write an If statement that only changes the cell if it's true.
If its false it leaves what is in the cell alone.
This is what I have so far:
HTML Code:
=if(a5>=today(),"payment",----if not, don't change what is in the cell-----)
View 3 Replies
View Related
Oct 2, 2007
I'm looking to use an if/and statement to give back a true of false but it doesnt seem to be working, I'll give an example, I want excel to search a set of cells to see if its blank and another cell to see whats written there(from a pull down menu) and if both of them are true I conditionally format to go green, otherwise stay white. It works for one cell, condition below:
=AND(Anoop!B3="IIC",NOT(ISBLANK(Anoop!C3)))
but I cant get it to do this
=AND(Anoop!B3:13="IIC",NOT(ISBLANK(Anoop!C3)))
i.e search the entire column
I was also wondering if it was possible if it found an "IIC" in B8 how I could get it to check C8, D8 etc..
View 9 Replies
View Related
Jul 2, 2014
How to leave a cell truly empty if the criteria of my IF statements is untrue. Currently, I'll write something like:
[Code] ....
But for some reason, when I copy and paste the resulting range of values elsewhere (to rid myself of the formula that determined them), the cells that did not return a value (where the statement is FALSE), are not recognized by a "Go To Special > Blanks" request, until I select all of the "empty cells" and clear them manually. Yet when I try to do a search on the same range for an empty space, I get no hits.
View 3 Replies
View Related
Nov 6, 2009
I have an IF statement that I need to look at different cells and return different values if ture or false, depending on what is selected in cell J2
Cell D2
if J2 = "FMB/FPI" then retrun the value of cell Y7
if J2 = "FPI/FPI" then N/A
if J2 = "FMB/OTHER" then return the value of cell Y7
Cell E2
if J2 = "FMB/FPI" then retrun the value of cell AC7
if J2 = "FPI/FPI" then then retrun the value of cell AC7
if J2 = "FMB/OTHER" then N/A
Cell F2
if J2 = "FMB/FPI" then N/A
if J2 = "FPI/FPI" then N/A
if J2 = "FMB/OTHER" then then retrun the value of cell AC7
View 4 Replies
View Related
Sep 10, 2013
Perhaps a bit cryptic but here is where I'm looking for.
Cell A1 gets the value YES (or NO) assignment by the user.
Cell B1 has some calculated value let's say 4 based on the formula If(A1="YES";2+2)
Now If the user assigns "NO" to A1 the value of Cell B1 becomes FALSE (return value of second part of the If statement)
I do not want the value of B1 changed if A1=NO and to stay the same (4)
View 2 Replies
View Related
Nov 21, 2008
I've written (with help from here) and IF statement, as below;
=IF('Raw - NUS'!G45="","",VALUE(TRIM(CLEAN('Raw - NUS'!G45))))
The issue is, that not all cells in my array are "" or a value, some are " " and some are " " which gives a FALSE to the arguement and returns a #VALUE! in the cell. Is there a way I can add an ISERROR to the FALSE, VALUE(TRIM(CLEAN('Raw - NUS'!G45))), result make this blank? I've tried OR, but it doesn't work.
View 2 Replies
View Related
Jul 16, 2007
I have a IF statement like this:
If (Range("D29").Value > 0 Or Range("e29").Value > 0) Then
D29 is an empty cell and E29 is zero. The IF test returns true. Does having an empty cell make it non-zero for an IF test?
View 9 Replies
View Related
Oct 2, 2008
Can an if statement return a formula (e.g. =IF(A1=1,C1+D1,0))
View 9 Replies
View Related
Mar 1, 2010
I have a formula that has been working and it looks like this
=VLOOKUP(A13;'IFS export'!$A$1:$F$19000;4;FALSE)
Now I want to use the same formula in an other workbook and it gives an error
=VLOOKUP(A2;DRAWING!$A$2:$C$9168;3;FALSE)
When I type this formula I get the window that says
"This formula contains an error.
*For information about fixing common formula problems, press help.
*...........
*..........."
And if I go and try to change the first formula that has been work it gives me the same error.
View 9 Replies
View Related
Feb 21, 2014
Find statement returns empty when i search in a range with XLWhole option enabled
Code:
Private Sub worksheet_change(ByVal Tar As Range) On Error Resume Next
If Tar.Column = 1 Then
Set f = Sheets("Sheet2").Range(Cells(1, 1), Cells(5000, 100)).Find(Tar(1, 1), LookAt:=xlWhole)
[Code]..
but when i use Cells instead of Range ,Find command returns perfect result
Code:
Private Sub worksheet_change(ByVal Tar As Range) On Error Resume Next
If Tar.Column = 1 Then
Set f = Sheets("Sheet2").Cells.Find(Tar(1, 1), LookAt:=xlWhole)
If f.Column = 11 Then Sheets("Sheet1").Cells(Tar.Row, Tar.Column + 1).Value _
= Sheets("Sheet2").Cells(f.Row, f.Column + 1).Value
End Sub
View 1 Replies
View Related
May 27, 2007
If I create a simple conditional statement in a cell:
=IF(A8="NX-QSNT",B8, "")
I get the expected B8 cell contents when "NX-QSNT" exists in A8, or blank when it doesn't.
If instead of qualifying this full string, I try to Search for the "-QS" string in that cell as the criteria:
=IF(SEARCH("-QS",A8),B8, "")
I get the expected B8 cell contents when "NX-QSNT" exists in A8, but I get "#VALUE!" if it does not find this "-QS" string.
I'm guessing it may be because SEARCH isn't actually returning a TRUE/FALSE response, but rather, a numeric one based on the position of "-QS". I tried using a numeric approach also, but this didn't help:
=IF(SEARCH("-QS",A8) > 0,B8, "")
View 9 Replies
View Related
Jul 31, 2008
I have this code that only returns a #NAME? error. I'd love it if someone could take a look and let me know what you think might be going on. If it factors into it, D1:D4 each contain one of the following: USD, AUD, GBP, MX and E1:E4 contain the corresponding exchange rate. Also, J7:AJ41 contain a function that returns a number. Let me know if you need more information. I just can't figure why this is not working.
Sub newtabs()
Dim x As Range
Dim Curr As String
Dim Rate As Double
For Each x In Sheets("Cash Flow Detail - WkCount").Range("D1:D4")
Curr = x.Value
Rate = x.Offset(0, 1).Value
Sheets("Cash Flow Detail - WkCount").Select
Sheets("Cash Flow Detail - WkCount").Copy After:=Sheets(2)
Sheets("Cash Flow Detail - WkCount (2)").Name = Curr
Cells(7, 10).Select
ActiveCell.FormulaR1C1 = "=IF(activecell.offset(RC7)=" & Curr & ",('Cash Flow Detail - WkCount'!RC*" & Rate & "),0)"
Selection.Copy
ActiveCell.Range("a1:aa35").Select
ActiveSheet.Paste
Next
End Sub
View 9 Replies
View Related
Oct 28, 2006
I have a sheet that uses vlookup when the lookup returns #na error how can i conditional format these cells to so text is same as background
View 9 Replies
View Related
Nov 12, 2006
My formula =IF(OR( FIND("Bugs",E2),FIND("Daffy",E2)),"/wkly",0). Always returns #VALUE! error. I can understand if neither value occurs in the string, what confounds me is if one of the two does occur in the string If I shorten to
=IF(FIND("Bugs",E2),"/wkly",0)
Then the expected output is returned
View 2 Replies
View Related
Jul 30, 2007
I have sumproduct formula that returns #N/A error and I'm not sure why
=SUMPRODUCT((YTD!$A$2:$A$2599=B$10)*(YTD!$P$2:$P$2599=$Q19)*(YTD!$E$2:$E$2599))
If I narrow the range from $939 to $1093 then the formula works.
But that is only evaluating 1 unit of 10
As I add worksheets to the workbook and update the unit numbers in B10, the entire range needs to be evaluated for matching criteria.
workbook is way too large to upload.
View 9 Replies
View Related
Sep 30, 2007
Is there a way in which you can create an if function or similar to give a reason for why the cell of data has an error.
Basically i have some data in a table, and when a #num! error pops up id like to in the cell next to it give a sentence stating why this has happened.
E.G.
Cell A1 Cell B1
#Num! Number error due to 'x' being too small
Not sure how i can get this to work, i have tried a basic if function but that hasnt worked.
View 4 Replies
View Related
