I have a formula, that is return a #Value! error for the blank cell that are referred to in the formula. How do I get rid of the #Value! error when I fill down? The formula works great.
=IF(G21>0,IF(A21+182
I'm working on a spreadsheet that i have a long if statement and it keeps till me i have a error. I stated reading and come to find out you can only have 7 statement.
=IF($R$6="X",VLOOKUP($A25,VISION,2,FALSE),IF($R$7="X",VLOOKUP($A25,VISION,3,FALSE),IF($R$9="X",[code]....
I am getting the Run-time error '380'. Could not set the value propery. Invalid property value.
I have a user form for data entry purpose which is working fine. Now, I am making a code for data editing purpose which pulls out data from the worksheet into the user form.
I am able to do this for text boxes and combo boxes that are not linked with each other. However I am getting a problem in the following case; I have a combo box and a text box that are linked to each other by combo box _change code which is below which may be the reason for the error I am getting for the next code...
Code:
Private Sub cmbColor_Change()
If cmbColor.Value = "Other" Then
lblColor.Visible = True
[Code]....
worksheets("Demorecords").Range("k2").formula = _
"=IF(AND(DAYS360(N2,Current_Date)>" & _
Combobox1.Text "!$B$6,DAYS360(N2,Current_Date)" & Combobox1.Text "!$B$7,"Pending Delete","Persistent"))"
A error box says compile error: expected end statement and then highlights this part (red)
I attempted to initialize values on a few Dim statements, but got compile errors: "expected end of sentence".
VB:
Dim sumTtl As Currency = 0
Dim searchTxt = "West"
when i write the following line to open the recordset then it gives me syntex error.
rs.Open "select batchno from tblmain", cn, adOpenKeyset, adLockOptimistic, adCmdTable
and if i write the following line then it works fine.
rs.Open "tblmain", cn, adOpenKeyset, adLockOptimistic, adCmdTable
if Statement A: =IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12) works very well
if Statement B: =IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12) works well too
now I am trying to say
=IF('Input Page'!B36="yes",(IF(M4>$B$17,0,LOOKUP(M4,$AA$36:$AB$44)*$B$15/12),(IF(M4>$B$17,0,LOOKUP(M4,$AA$20:$AB$29)*$B$15/12))))
Basically, if B36 is yes, use If Statement B, otherwise IF Statement A. If I write Yes, I get a "Value" error, if I change the yes to 1, I get a FALSE error.
I have this line of code:
Code:
If Left(value.use_type, 1) = "D" Then
Where use_type is a field in a user form.
I am getting an "object required error"
experienced coder (not VBA) and I'm having trouble with a simple statement. No idea why it was working before and moving it to it's own Sub screwed it all up.
Sub InitialMessage()
On Error GoTo BadEntry
SiteTotal = InputBox("Enter the number of approved sites *Must be an Integer > 0*")
BadEntry:
Entry = "Bad"
Msg = "An error occurred!" & vbNewLine
Msg = Msg & "Make sure you enter a valid value in all the prompted Message Boxes"
MsgBox Msg
I am running a macro which filters a column to show only records with "#N/A" (ie an error), and copies these to another worksheet. As I am aiming for no errors, there will be occasions when there is no filtered data.
My problem is that, unless I use something like xlCellTypeVisible, when there is no data shown it still copies and pastes all the hidden records. And if I do use it when no filtered data, I currently get an error "No cells were found".
I have tried many iterations of code correction and i think i'm currently blinded by staring at it so long!
My current if statement reads as follows:
[Code] .....
I think I might need to use some sort of On Error Resume Next statement, but I have never used these before. When I tried adding that before the If statement, it just ignored the criteria and tried copying hidden rows - the exact opposite of what I want.
I'd like something that said, if this condition = error, skip over entire if statement and carry on with rest of the sub.
I have a Userform which has 2 textboxes. User enter his employee id on textbox1 then enters a valid break time code which are 1,2 and 3 on textbox2. If User typed 1 then first breaktime start time will be pasted on the worksheet. When User returns after break he then enters his employee id again and then type 1 to end his first breaktime, the end time will be pasted on the worksheet. My program works fine however, I am trying to place a code which will prompt the user to end his first break time before entering another valid break code. Kindly check my code below as I am receiving an error message. 'Run-time error 9' Subscript out of range. This thing is driving me nuts. Any advise or can you tweak my coding vba experts.
View 14 Replies View RelatedI keep a formula to many arguments error.
=if(C2="","X","", ), IF(h2="","X","", )
What I am trying to say is if cell c2 is populated enter a "x" and if h2 is populated enter a "x".
Excel 2010. Windows 7
Run-time error '-2147467259 (80004005)':
An unexpected token ""20*"" was found following "1' AND
PERIOD = LIKE*. Expected tokens may include: "". SQLSTATE=42601
code died at RS.Open SQL, CN
/////////////////////////////////////////////////////////
Sub GET_OSI
Dim sn as String, osi as string, saposi As String
[code]....
I get an application defined or object defined error at the select statement 1004...I know I know I shouldn't be selecting in code so I'll fix that but why can't I set the range?
NumRows = Sheets("Timelines").Rows.Count
LastColumn = Sheets("Timelines").Range("A1").End(xlToRight).Column
LastRow = Sheets("Timelines").Range("A" & NumRows).End(xlUp).Row
Sheets("Timelines").Range(Cells(1, 1), Cells(LastRow, LastColumn)).Select
TIA, Charlie Brown.
I ran into a screen update problem in a project I was working on and couldn't find a solution, so I wrote some test code in a new workbook as follows;
Sub Flkr()
'-------------------------
'Screen update test
'-------------------------
'Select sheet1
Sheets("Sheet1").Select
'Disable screen update
Application.ScreenUpdating = False
'Select sheet2
Sheets("Sheet2").Select
'display message
MsgBox "Why is the %&$@ screen updating?", vbCritical, "??????"
End Sub
Seems simple enough,eh?
When I step through this code the first statement works(sheet1 is selected)
The next statement is executed without an error, so I assume it works
The next statement sheet2 is selected, and the screen updates!
Sub SheetFinder()
Application.MacroOptions Macro:="SheetFinder", _
HasShortCutKey:=True, ShortcutKey:="G"
msg1 = "What sheet would you like to go to?"
msg2 = "I'm sorry, but that sheet could not be found."
On Error Goto NotFound
TryAgain:
prompt1 = InputBox(msg1, , "Template")
If prompt1 = "" Then
End
Else
Sheets(prompt1).Select
End If
End..........
In cell C34 I'm trying to duplicate the content in cell J70, but I don't want to show any content in C34 unless J70 is not blank.
I tried this formula in C34, but I keep receiving an error message:
=if(j70="","",(=j70)
I am getting this error and where th If not starts its is in red showing that is where the issue is:
HTML Code:
Sub RemoveRows()
Dim LR As Long, i As Long
Dim ws As Worksheet
Set ws = Worksheets("100 Airports")
LR = Range("B" & Rows.Count).End(xlUp).Row
For i = LR To 10 Step -1
[Code] .....
I have some code below. I have error handling in place for when it tries to open a specific file. If it isn't there then user has option to continue and ignore this file, or browse and select a new one.
The problem is, when the user wants to ignore the file, the "Resume Next" continues to run the VBA assuming the file was ok i.e. the code after the line to open the file. What I would like is for it to skip the succeeding code and go to look for the next file.
Below is the VBA:
Code:
For i = 0 To 2 Step 1
'add in error handling for if the file is missing
On Error GoTo MissingFile
Workbooks.Open Filename:="\hbeu.adroot.hsbcdfsrootgb002hfcfinance01fnce" & qfolder & "Data" & qfile(i), UpdateLinks:=False, ReadOnly:=True
[Code] .........
Missing File:
qMissingPrompt = "There was an error opening data file. Click OK to browse or Cancel to ignore and move to next file"
qAns = MsgBox(qMissingPrompt, vbOKCancel)
'click cancel - ignore error and move onto the next file
If qAns = vbCancel Then
[Code] .......
So, where it says Resume Next, currently it will start running the following (after On Error Goto 0)
Code:
Set datawb = ActiveWorkbook
range("A2").Select
Do Until ActiveCell.Value = ""
etc.
What I would like it to do is go back to is to go to the next i
Code:
For i = 0 To 2 Step 1
Or even to go to the 'Next' statement at the end so that it moves onto the Next i and tries to open the next file.
I'm having problems implementing a Select Case statement. Keep getting case without select case at Case condition2.
Code:
Select Case Condition
Case condition1
If Cells(rsRow, rsCol).Value = "" Then
Cells(rsRow, rsCol) = TextBox2.Value
[Code] .......
why i get a runtime error with the following
With Worksheets("List Data"). Range("post")
if you need all code to see it better, please let me know, it is alot of code,so do not want to post it if there is no need to.
I am currently using an Intersect statement in a worksheet module to perform two things:
1. Insert a time stamp into row 2 when row 1 has a price inserted
2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user.
If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies View RelatedI am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.
My purpose is trying to look up
Code:
tb_SelJobID.Value
from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if
Code:
TbSelYr.Value
matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.
Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.
Code:
Sub CmdGo3_Click()
Dim Row As Range
Dim FinalRow As Long
Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range
Application.ScreenUpdating = False
[code]....
Windows 7 with Excel 2010
I have an Excel Sheet which I use as Database. The database has 11 columns and I insert data with the following function:
Code:
Sub testInsert()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim i As Integer
Dim strTest As String
strTest = "test"
[Code] .......
Now I want to retrieve this data. i.e. I want all F1 where F2 and F3 are 0 AND I want them ordered descending. I'm trying to achieve this with:
Code:
Sub testSelect()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim mrs As New ADODB.Recordset
Dim strTest As String
strTest = "test"
[Code] ....
The result I am getting looks like this:
9
8
7
6
5
4
3
2
15
14
13
12
11
10
1
I assume, that the data is interpreted as String instead of an integer. But I explicitely stated the data as Integer when storing the data into the DB.
I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
I am looking to have one formula containing two If Statements that minus.
=IF(B6="investment",C6,0)-IF(B7="gross",C6,0)
So the result of If Statement 1 minus the result of If Statement 2.
What I am seeing at the moment in the cell is FALSE and what I want to see is the sum.
If A1 shows 10:00am and A2 shows 4:00pm, then A3 calculates the total number of hours: =(A2-A1)*24
But if A1 shows "Off," then A3 shows 0: =IF(A1="Off",0,(A2-A1)*24)
Now, if I want to change "(A2-A1)*24" to another if-statement, how do I do this? I can always set up a hidden cell (A4) that contains the results of the first if-statement, and then say: =IF(A1="Off",0,A4). But can I do this without going through all the trouble of setting up hidden cells?
Each row represents a call. If a call in column A equals "CW" and it has the highest duration (H:MM:SS) value in column B, then provide me the date (MM/DD/YYYY) for that call that is stated in column C.
i.e.
Column A --- Column B ---- Column C
AB ------------ 0:02:22 ----- 04/14/2007
CW ----------- 0:03:13 ----- 04/16/2007
CW ----------- 0:01:42 ----- 04/13/2007
Thus, the value that should be returned is "04/16/2007".
I have a problem with a formula inserted with control+shift+enter
The formula is
MEAN(IF(' VALIDATION'!$G$2:$G$59999=D30;'VALIDATION'!$E$2:$E$59999))
In the Validation sheet I have the column G with values 0 and 1, and another column E with numeric values.
Changing the value of cell D30, the formula will calculate the mean of the values in column E that have a value equal to D30 in column G.
The problem is that this function works when D30=1 and not when d30=0, in this case the formula returns N/D.
I have tried using also text values instead of 1 and the formula works . The problem is only when D30 is 0