formula to calculate how many cells in a column contain data of any kind. The data might be a number, a word, or even a symbol, such as "):>:)" for example. The range will change from time to time. For example, one day it might be a2:a4956. A few days from now I might delete a few rows from the top, such as rows 2 through 26, so then the range would be a2:a4931. Then I might add rows at the bottom with data that I need to be counted. I dont want to have to change the formula evertime I add or delete rows with data. I do not want the formula to count a blank space created by the space bar as "data." One formula I used sorta worked, but if the cell appeared empty, but had been cleard out by pressing the space bar instead of the delete key, the formula counted it as a cell with data.
I have a list of data in columns Q R S and i need to in between each line insert the data from columns D E F underneath and then underneath that the data from G H I
so bascially i have a list at the moment like this
Q R S
[Code]....
There is 2 sheets in total , 1 i need to inc 1-1 draw as above and the other sheet to be exc the 1-1 draw . I have attached an example of what i am trying to achieve . can offer as i have had this on excelforum.com with over 150 views and no solution
I have a range of 30 cells in a row. From that row there are groups of cells that have data that might be 1-7 cells populated in a row and in between these groups are blank cells in the row. I need to see what is the highest number of cells in a continuous row that contain data, what the mode is for continuous cell counts, and what is the average value for the data from the continuous cells. The average is a nice to have but not entirely necessary as most cell data will be fairly similar and I can get a close enough average just by knowing the average number of cells that contain data in a row. I have to do this calculation for about 1000 rows of individual data so its important a formula fit in one row.
Almost need a count function to count starting with each cell and then stopping at the first no no value it finds. Then it would show those counts and I could run a formula to pick the highest count and also show the mode of counts.
I will let the experts at it!, my weak mind could not think this one through. I thought something to do with MATCH for a while but no go from what I could do.
I'm trying to make a spreadsheet for work so when im not there they can just enter the day for example sunday and what they have and then it will show them what they need to prep
I have a big list with names, money spent and date. I need somehow with a formula to do:
Take all the money spent on some specific day from a specific person an put it into a field.. and this for every date of the week and for everyname... Im gonna upload a photo.
Name Money
Date
Daniel 5
01.03.2014
[Code] ........
I need the list of the left to produce me list of the right somehow, at least just the sum of everything spent everyday.
im trying to count all the cells with data in sheet 1 column g but it must omit any cells that have "vs" in it. all cells have scores in like 1-1 2-2 2-1 etc but a few have vs in them and i dont want them counted
In order to avoid embedding 12 if statements, I want to take an average of a selection of cells based on what month it is. So I have a "now" function, and then a month function referencing the "now" cell so that I get the current month as a number 1 through 12. I have a row of expenses (C14:N14) and I just want the average from January up to the current month. The reason I can't take an average of the entire selection is because the users don't want to have to enter a 0 everytime there's nothing, they'd like to leave it blank, so the sheet needs to recognize what month we're up to. And the average function in Excel only takes an average of the data that is present, not the entire range. For example, if the data in the first cell was 15, second cell was 15, and third cell was blank, the average function returns 15 and not 10. So what I need is, for example, if it's March, the average will calculate =average(C14:E14) and so on. Any ideas? Maybe it's a simple change of formula instead.
Basically I have in the first column, different products (lets call them a, b,c and d). in the second column is a counter which starts at 1 and continues counting down the column.
In the third column I need to identify if it is the last time the product has been run. i.e there are no more duplicates of product a further down the 1st column.
I'm in need of some VBA code to control the updating of information from 16 active workbooks to a master workbook and vise versa. I would like it on command as it slows down the use of the workbooks when they calculate after every change of data as they are being used. These workbooks are connected over a company intranet and are used 24/7.
The desire is that cells in the master workbook will read specific cells on each of the other workbooks and complete a "map display" of the data. The data is not in a column or row range side by side but scattered across the sheet to form a map when data is entered.
I've tried using code to open and close the workbook with on time events but that hasn't worked.
I have a phone list set up as LastName, FirstName PhNum all in a single column. The problem is, some last names have a space, some phone numbers are in the xxx-xxx-xxxx format while others are just an extension like xxxxx.
Example: Smith, John 519-123-4567 Van Smit, Joe 12345
What can I use in a formula to extract the numbers so that I can end up with 2 columns, one with names, the other with numbers.
In my spreadsheet, I have data for each sale in each row. Column C is the buy price, and column D is the sell price. I need column C to be subtracted from column D to get the profit into column E so that I can AutoSUM any cells in column E for total profit over any time period. The problem I'm having is that in columns C and D, I have either a dollar sign in front, or the letter m following without a space (ie $45.00 or 150m). Many cells in column C also contain another word following the buy price, and many cells in column D have a date following the sell price (ie $32.00 12/11 or 42m buyout).
Examples of how my spreadsheet looks: A1: 12/13/12 B1: Item #1 C1: 100m D1: 152m A2: 12/14/12 B2: Item #2 C2: $20.00 D2: $35.00 A3: 12/15/12 B3: Item #3 C3: 90m bid D3: 120m 12/16
So looking at my example above, I would need cell E1 to automatically show "52m", cell E2 "$15.00", and cell E3 "30m"
How I can get a formula for all of column E that will give me my profit for both $ and "m" for each item (row). I have tried the SUM function but just keep getting the #VALUE! error, it does not ignore the text like many people say it should.
I am an architect and recently I was required to do some extensive calculation relating to water requirements and toilet requirements for a building that i was designing. i created a excel file, with a basic vlookup function to put certain values in the cells that are pre-defined for a particular building typology (mostly created by governmental bodies as guidelines). for example, when i choose a particular type in column E, column F and G fills up automatically. now this table also gives me occupant load based on what is the area i enter in column D.
The problem is that I want to automate the calculation of toilet requirements. Now, each typology will have a different formula to calculate WC/Urinal/washbasin.
1. there will be 17 different formula - one for each typology (as shown in sheet 5) 2. Column j will calculate what is the number of WC required based on 2 criteria - first id what is the typology and then looking what is the number of occupant.
The problem here is for example, if in E9, selected typology as "offices", the formula of offices typology will be used in J9 and occupant value from H9 will be used but if i have E18 also selected as offices typology, the same formula will use occupant value mentioned in H18 instead of using H9.
Hence, excel will first have to look what is the typology selected. based on that, it will load formula - out of that 17 different formula - specific to that typology and finally it will refer to corresponding row for occupant load and will use it in the formula to get the result.
I was working on a chart to calculate my Amazon seller rating to see how many more perfect order I need to hit my next target grade. Here is how the calculation works.
Order with no problem gets 100 points per order Minor problem gets 0 point Moderate problem minus 100 points Severe problem minus 500 points
Grade are evaluate by: <84.5 Fair <96.5 Good <98.5 Very good Above is Excellent
Total points / total orders = final grade (or percentage)
As of now i got : 53800 (points) / 624 (orders) = 86.22(%)
Now that I know what grade I've got so far and I also want to know how many more perfect orders I need to achieve my next targets or in case some bad orders come by and how far they pull me down.
Attached is my work sheet so far and I'm just missing the calculation for the orange shaded part.
I need identifying correct title and corresponding company name. For this I need a UDF which looks for first occurrence of title having event or marketing or meeting word in data and if found the remove other titles and company names already separated with "/".
Sample Data Producer, Target BTC@Periscope/Events Manager, Recognition Events@Minneapolis Park & Recreation Board/Event Producer@Events by JLS
Required Result Events Manager, Recognition Events@Minneapolis Park & Recreation Board
Sample Data 2 Sales Associate@Teavana/Event Assistant@City of Saint Paul
Required Result 2 Event Assistant@City of Saint Paul
Sample Data 3 Sales and Catering Manager@Bunker Hills Golf Course at Town & Country Caterers/Marketing Coordinator@Town & Country Caterers
Required Result 3 Marketing Coordinator@Town & Country Caterers
We have our system set up with 2 folders one with blank forms and the other with these forms filled out and completed (records), is their a trick to removing the data from a completed form fast with out removing tables and text used to make the forms questions? If I could do this it would save time from opening in the blank forms folder then saving in the records folder.
See the screen shot I have attached: ramp rate.jpg
Basically I have to trawl through tonnes of data every day and I would like an automatic way to do it for me. I am calculating the ramp up rate on an Autoclave oven so these figures are temperatures.
I have various ranges for each section of a cure cycle so I will use this one example.....
I need to calcuate the ramp up rate between 115°C and 140°C
I need to find the min and max between 115°c and 140°c then count the cells within the min and max, minus the min from the max then divide by how many cells there are inbetween
Is there a way to delete this un-needed data while it is still in an array (effectively resizing the array - removing specific columns and rows) and then writing the array back to the worksheet?
I have an interactive moving average model (which has an adjustable moving average feature) which successfully charts the moving averages of the data on the chart. I have coded this with VBA. However, I would like to get a data dump of the individual moving average data points. That is, I would like to see the individual data points (that are plotted on the chart). Would anyone be able to help me with this?
I have a need to use data validation for user selection of dependent lists, but dependent upon what the user picks from a previous list I need some selections to disappear or become hiden somhow.
For example, let's say I want to first pick from a list of Countries, then States, then Cities, but some of the Countries do not have States, just Cities and some have both. When a Country does not have any States I need the States data validation drop down box to disappear and the cell to become blank so that the user knows there is no selection needed.
I know how to make the dependent data validation lists, but I do not know how to make one of these drop down lists disappear based upon a previous selection in dependent lists.
I have just inherited an Excel spreadhseet that displays job titles and what types of documents each one should be trained on. What I am trying to achieve is a formula, or something to that sort, that will look at each job individually and tell me only those documents that they need to be trained on and list it on a seperate sheet.
If you look at the attached document you will see that the first 2 columns contain a document number and description. Across the top you see each of our job descriptions. In the middle you see an X that indicates that person should be trained on that document.
So once more, I would like to take each Job Description (seperately) and list only the documents that have an "x" in their column on another sheet. I already have the sheets created, I just need to know if there is some kind of formula or macro that can do this for me.
I have a sheet with 1 collumn containing dates (typed as date) and formula's (=today()). I would like to count de cells which contain the formula "=today()". If I count the cells containing today's date, it counts the cells containing the typed date and the cells with the formula "=today()" as well. So here my question: Is there a way to make a difference between "dd-mm-yyyy" and "=today()"?
However, I have got an Excel file which contains a lot of information. There are four sheets with large Pivot Tables.
But the thing is, the plan is to do the tables much larger, create tables which more specifically shows information. When doing so, the tables will show much more information, and therefore be much larger. It will be difficult to read and understand the tables because of the large amount of information.
What I want is to store information in, for example, another program such as Microsoft Access. There, I can put a huge amount of information and then link it to Excel, so that in Excel I only see the Access stored information when I "search" for it with y created slicers. Like, when I use my slicers and click on one category it sort out and shows me the information i want, even though it's stored in Access. It only shows it in Excel when I "ask" for it. This is what I have thought.
I need to know if there is a formula to count how many cells are the same between to columns, IE: If "Bob" had #s 2, 3, and 5 and the correct numbers are #s 1,3, and 5, Is there a formula to put in the cell below "total" to figure out how many of the #s Bob has are the same from the correct #s?
BOB-----CORRECT-----TOTAL 2-------------1-------------2 (Bob picked #3 and 5 which are correct) 3-------------3 5-------------5
PETE-----CORRECT-----TOTAL 1-------------2--------------1 (Pete picked #6 which is the only 1 correct) 3-------------4 6-------------6
I have been looking for a way to count the number of cells in a column that do not contain the word "No." I used the countif formula to count the cells that do contain "No" but I need a formula to count cells that contain anything but the word no.
I have a column of cells (say N7:N149) for which I would like to count the number of times text is visible, as some are blank. Normally I would go =COUNTA(N7:N149), but in this instance the cells are only blank because I have related them to adjacent cells and nominated "" if those adjacent cells are blank, therefore when I use my =COUNTA(N7:N149) formula it gives me a total of 143 (149-7).
