I figured out how to populate the ComboBox, but I have to manually step through the code to do it. How do I get it to populate the values when the spreadsheet is opened?
Then, what I want to do is have the cell formula depend on one of two selections in the ComboBox.
When the userform is loaded, I want the data in each range to be available in the dropdown for each respective combobox. It would be great if spaces can be removed from each list, but from what I read, this may be an issue.
I have created a form which is called up via a macro and then shows a combobox which contains the names of the worksheets in the workbook. I am trying to enable the user to select one of the worksheet names from the combobox and then store that name (the book does not have fixed sheet names) and continue with the original macro using the stored name. I just can't figure out how to use the selected name in the original macro.
I’m trying to do a pull down with scrolling ability in a cell that references another worksheet. I want to look like the one that occurs when you use “Data Validation”. I’ve seen this in another workbook and it does not look like the used VBA.
I have a combobox from the Forms Toolbox inserted in a worksheet and have a macro assigned to run when the user selects a value. After the value is selected in the combobox I'd like the combobox to clear itself (show a blank). Currently the selected value stays highlighted in the combobox after the selection is made. I know how to do this with a Controls combobox, but cannot figure out how to use it with a Forms combobox. (The reason I am not using the controls cb is because there seems to be an Excel2007 bug that causes the properties of the displayed text to randomly change when the control is activated. When a selection is made in the controls cb, the text displayed in the cb turns bold, and either grows or shrinks in size to the point that it is unreadable. Same thing seems to happen with all other ActiveX controls...) Sample attached.
Since Form Controls comboboxes don't allow font editing, I need to switch to ActiveX...
The combo box values come from the following cell range:
tbl_arrays!$I$3:$I$6
Those values are, from top to bottom: "select distance", "50 Miles", "100 Miles", "150 Miles".
The following macro is also assigned to the combobox:
[Code].....
I have two issues. The first is that the macro doesn't seem to be working. It is supposed to filter a list of cities within 50, 100 and 150 miles of a user input zip or city. The original Forms Control combo works but not ActiveX after I put the code in the change event:
[Code] .........
The second issue is that the last clicked value in the ActiveX comboBox replaces the top one.
Ex: from top to bottom, the combobox should display:
[Code] ........
but if the user clicks "100 Miles", the combobox is then going to display
[Code] ......
If the user then select "50 Miles", the box displays:
im using combobox from the forms toolbar. and i have tryed and searched lots of forms and sites but no results, so what im trying to do is change the font size to 12 in my combobox using VBA.
-im using xl2000
-i dont wanto switch to the combox in the active x becouse i have more than 70 comboboxs in this spread sheet. and it will also be very complicated to change the comboboxes due to all the link cell's and there values.
I have one userform that loads combobox values upon userform Initialize. Though through a second userform changes can be made to anotherworkbook this workbook is saves any changes. when i close the second userform i need to rerun the 1st userform Initialize event to update the combobox's incase changes have been made.
User Form Basics - Populating Text Boxes. A few tweaks later and its reading the data just fine. Some of the specific form objects and range names have changed, but it's the same logic.
Anyway, this isn't just for display. I need to export the data back to the spreadsheet. So, I plugged this line into the event handler for the "Save & Exit" button on the sample form in the other thread:
try and achive is when a user selects a item from the 1st Combobox the 2nd Combobox is the populated with the cell that is to the right of the selected item.
for Example if a user selects AAB from combobox1,, Combobox2 should populate with Belly.
I have a code that import a txt file to an existing sheet, and works perfectly. I also have a ComboBox named "txtstorey" where users select the level they are working on, ie Ground Floor, Forst Floor etc.
I need to add in a VBA code that add the level that is selected in the cells on the same spreadsheet
For example, the current code import the data like this (It places the data at "$C$1"
Living Room20 Kitchen14 Bedroom 112 Bedroom 210 Bedroom 311 Bathrm4 En Suite5 Hallway3 Garage18
Dim mdNextTime2 As Double Dim mdNextTime1 As Double Dim mdNextTime As Double Dim myCount As Integer Dim myC As Integer Sub If (myCount Mod 5 = 0) Then end IF end Sub
Now, when myCount is multiple of 5 it should go inside that loop. Instead it goes inside immediately, also when myCount = 0 So I decided to initialize myCount to 1. But the strange thing is that I don't know how?
If I write: Dim mdNextTime2 As Double Dim mdNextTime1 As Double Dim mdNextTime As Double Dim myCount As Integer = 1 Dim myC As Integer
Public Sub Timesht() userform1.Show End Sub And this in my UserForm module:
Private Sub UserForm_Initialize() '//Populate ComboBox1 Sheet1.Range("K5", Sheet1.Range("K65536").End(xlUp)).Name = "CODE" userform1.ComboBox1.RowSource = "DATA BASE!CODE" End Sub I have a named range as "CODE" in my DATA BASE!, sheet1.
I keep getting an error: " 380: Could not set the RowSource property. Invalid property value."
when I type in UserForm1 and arrow down. in turns into lowercase letters.
I am running into the error, "Procedure too large". I know I need to break the range down into Arrays, so how can I hard code the values into an array? I cannot find an example to follow. Ranges: D:E,K:L,O:P,....etc. I know I can break the rows up into an array too, but one thing at a time. Here is an example of the range for D:E.
I have two userform combo boxes, the second follows up on the results of the first.
The second Combo Box looks for incomplete fields and provides them in a drop box. If the data the second Combo Box is looking at (This is different data than the first Combo Box is looking at.) is complete it updates the field, if not then it adds it to the drop down list.
My problem is this, if it finds everything updated and nothing is added to the drop-down list, how do I exit? I just want a complete break where all programming ends.
I am in the Initialize subroutine and I have tried Exit Sub and it still brings up the user form.
The initialization code of a userform I'm using has started causing me 'Runtime Error 13, Type Missmatch' and I can't figure out why. Can anyone see a reason why I may be experiencing this,
Private Sub UserForm_Initialize() 'Get Last Entry Dim countnonblank As Integer, myRange As Range Dim SDate As Date, SDateRange As String, EDate As Date Dim SDateString As String, EDateString As String, DirString As String
'count cells with data in them Set myRange = Sheets("textfilemerger").Range("A:A") countnonblank = Application.WorksheetFunction.CountA(myRange) 'decide if data is present or not If countnonblank = 1 Then.............................
I have a userform on which there is a frame containing 8 option boxes. After a query, the results are displayed in the form. If I have a value of 1 in a cell, optionbox1 is checked; a value of 2 checks optionbox2, etc. It works great EXCEPT when first initialized. At that point, it checks the last optionbox, even if the number is 1. I have built a next and previous feature to scan the data, and when I return to the first entry, the correct box is checked. I tried coding blanks into the fields prior to populating them, but I still get the same results. Is there some explanation available so that I may remedy this? I'd really like the first piece of data to be correct.
I have a user form called frmAddRepresentative. Under the Initialize event I have the following code.
Code:
Private Sub UserForm_Initialize()
'This procedure runs when the frmAddRepresentative form 'is initialized. The procedure sets the repInformation 'sheet as the look sheet sends the focus to the combo box 'used to enter the name and updates the combo list
Set WS = calcRepInformation
UpdateComboLists Me.cboRepName.SetFocus
End Sub
I am getting the following error: Could not set the List property. Type mismatch. I have the exact same code on other sheets and it works fine.
how to declare&initialize a variable as Global in vba?
I have a variable , listGroup=Array("aaa","bbb","ccc") now i am using this variable for 3 different functions. so what i am doing is wrote the same code to 3 functions, so how i can declare&initialize this variable as global and access to all functions.
I am trying to SetFocus on a single textbox in a simple form. I am not sure if I am doing it right.
Private Sub UserForm_Initialize()
' On Error Resume Next
' Dim rheadings, cl As Range ' ' Set rheadings = Worksheets("CONTACT").Range("A1:F1") ' For Each cl In rheadings ' Me.cbxSearchWhere.AddItem cl.Value ' Next cl
With Me tbxSearchCrit.SetFocus End With End Sub
Kind regards, Mentor Auto Merged Post Until 24 Hrs Passes;Hi: I answered my own query - just commented out the setfocus instruction and it defaults to the first, and only, textbox by default
I have a total of 648 textboxes on my form. Some of the textboxes allow for char values, some numeric and some monetary. The problem I am running into is with the monetary. I am trying to say on initialize, I want to autoformat 208 of these textboxes to $0.00 and when the users puts in an actual amount it changes to $100.00 or whatever the amount. It would be ideal to just have the textbox blank and when the users puts in something it is formatted automatically to $100.00. Just like I would if I were formatting an Excel column or cell. Here is my code so far: (hopefully no typos in code. Cannot copy and paste as using home computer. My work computer blocks the excelforum site.
When opening a workbook, I'd like to set a Toggle Button's value to TRUE. I already have code Workbook_Open() procedure which resides in the ThisWorkbook module. This Workbook_Open() procedure already does lots of other things. I would like to add code in Workbook_Open() that would set the Toggle Button's initial value (TRUE).
The code for the Toggle Button resides in one of the Sheet modules (not the ThisWorkbook module). I attempted to set this toggle button value using the following code (see row 10), but it does not pass the compiler due to not being a defined variable.
I have a userform that creates labels and checkboxes for those lables on the initialize event based on an if statement. I would keep getting an error on a line where I try and use the name of one of those created checkboxes of "variable not defined" as if it hasn't been created, but it was.. Here is the code for the creation:
'Option Explicit Private Sub UserForm_Initialize() 'dynamically add the tickers and funds based on if there is any data inputs for them.
'declaring variables Dim lbl As MSForms.Label Dim i As Integer Dim x As Integer Dim newcheckbox As MSForms.CheckBox
'selects the summary page Sheet1.Select
For i = 7 To 65 If Cells(i, 3) "" Then..................
When running a script within Excel, is there a way to cause the script to initialize or open an application other than Excel? For instance: If I desired to have the script open 'C:program.exe' is there script available for this?
