Public Sub Timesht()
userform1.Show
End Sub
And this in my UserForm module:
Private Sub UserForm_Initialize()
'//Populate ComboBox1
Sheet1.Range("K5", Sheet1.Range("K65536").End(xlUp)).Name = "CODE"
userform1.ComboBox1.RowSource = "DATA BASE!CODE"
End Sub
I have a named range as "CODE" in my DATA BASE!, sheet1.
I keep getting an error: " 380: Could not set the RowSource property. Invalid property value."
when I type in UserForm1 and arrow down. in turns into lowercase letters.
I have one userform that loads combobox values upon userform Initialize. Though through a second userform changes can be made to anotherworkbook this workbook is saves any changes. when i close the second userform i need to rerun the 1st userform Initialize event to update the combobox's incase changes have been made.
When I run the userform initialize procedure to reset the values in text boxes and the like instead of resetting like it should, now it closes the userform completely and then won't allow me to show it again, what could be the problem?
Private Sub UserForm_Initialize() Me.MultiPage1.Value = 0 TextBox3.Value = ActiveWorkbook. Sheets("Sales Invoice"). Range("G15").Value Dim hWndForm As Long Dim hMenu As Long hWndForm = FindWindow("ThunderDFrame", Me.Caption) 'XL2000 hMenu = GetSystemMenu(hWndForm, 0) DeleteMenu hMenu, SC_CLOSE, 0& End Sub
The Dim stuff down is to gray out the x button, there are also some module level declarations to go with that...
Private Declare Function FindWindow Lib "user32" Alias "FindWindowA" (ByVal lpClassName As String, ByVal lpWindowName As String) As Long Private Declare Function GetSystemMenu Lib "user32" (ByVal hWnd As Long, ByVal bRevert As Long) As Long Private Declare Function DeleteMenu Lib "user32" (ByVal hMenu As Long, ByVal nPosition As Long, ByVal wFlags As Long) As Long Private Const SC_CLOSE As Long = &HF060
the userform shows when the workbook opens and is then hidden when the user has finished entering values, then when the user goes through the process of being asked to print and save, they are then asked if they would like to create a new record, if yes then it shows the userform again, but the userform is still filled with all the stuff previously entered. I tried using the unload me instead of hiding and that wouldn't work at all, didn't give errors just didn't show the userform either, this at least shows the userform, but now when the user goes to clear the information by initializing the userform again, it simply closes the userform and then it can't be shown again either.
[url]
This is the link to the ZIP, and here are some instructions for setting it up to work.
The contents of this need to be unzipped into a folder called SyntheticShield that is placed in the C: drive that way all paths begin with C:SyntheticShield and then the other folders or files will be referenced correctly. The template I'm having problems with is the SyntheticShieldInvoiceMaker template, when you open it you'll be prompted whether you want to create a new invoice, number is final blah blah blah, say yes, then it will ask if you are importing from the Quotemaker which you aren't say no, it should then show the userform as it should. Then you can go through that process and by pressing either the create invoice or go to template directly whatever, you can hide the userform. Then you press the command button (red) a userform is brought up asking if you'd like to save without emailing, save with emailing or close controls, as for right now, I'm just getting the save without emailing to work the rest is all the same just a few tidbits of code. So click save without emailing, it should then prompt an are you sure message box, click yes it will do some things, then it will ask if you want to print, click no, then it will ask do you want to create a new invoice, click yes, this should then start the process all over again by calling the workbook_open procedure, however, when you go through everything, and click no to the import from quotemaker part it won't show the userform. And at one point it would, but then I couldn't initialize the userform without it disappearing and not being allowed to be shown...I tried putting a command button on the template to show the userform, but it wouldn't do it either.
I have two userform combo boxes, the second follows up on the results of the first.
The second Combo Box looks for incomplete fields and provides them in a drop box. If the data the second Combo Box is looking at (This is different data than the first Combo Box is looking at.) is complete it updates the field, if not then it adds it to the drop down list.
My problem is this, if it finds everything updated and nothing is added to the drop-down list, how do I exit? I just want a complete break where all programming ends.
I am in the Initialize subroutine and I have tried Exit Sub and it still brings up the user form.
The initialization code of a userform I'm using has started causing me 'Runtime Error 13, Type Missmatch' and I can't figure out why. Can anyone see a reason why I may be experiencing this,
Private Sub UserForm_Initialize() 'Get Last Entry Dim countnonblank As Integer, myRange As Range Dim SDate As Date, SDateRange As String, EDate As Date Dim SDateString As String, EDateString As String, DirString As String
'count cells with data in them Set myRange = Sheets("textfilemerger").Range("A:A") countnonblank = Application.WorksheetFunction.CountA(myRange) 'decide if data is present or not If countnonblank = 1 Then.............................
I have a user form called frmAddRepresentative. Under the Initialize event I have the following code.
Code:
Private Sub UserForm_Initialize()
'This procedure runs when the frmAddRepresentative form 'is initialized. The procedure sets the repInformation 'sheet as the look sheet sends the focus to the combo box 'used to enter the name and updates the combo list
Set WS = calcRepInformation
UpdateComboLists Me.cboRepName.SetFocus
End Sub
I am getting the following error: Could not set the List property. Type mismatch. I have the exact same code on other sheets and it works fine.
I am trying to SetFocus on a single textbox in a simple form. I am not sure if I am doing it right.
Private Sub UserForm_Initialize()
' On Error Resume Next
' Dim rheadings, cl As Range ' ' Set rheadings = Worksheets("CONTACT").Range("A1:F1") ' For Each cl In rheadings ' Me.cbxSearchWhere.AddItem cl.Value ' Next cl
With Me tbxSearchCrit.SetFocus End With End Sub
Kind regards, Mentor Auto Merged Post Until 24 Hrs Passes;Hi: I answered my own query - just commented out the setfocus instruction and it defaults to the first, and only, textbox by default
I have a userform that creates labels and checkboxes for those lables on the initialize event based on an if statement. I would keep getting an error on a line where I try and use the name of one of those created checkboxes of "variable not defined" as if it hasn't been created, but it was.. Here is the code for the creation:
'Option Explicit Private Sub UserForm_Initialize() 'dynamically add the tickers and funds based on if there is any data inputs for them.
'declaring variables Dim lbl As MSForms.Label Dim i As Integer Dim x As Integer Dim newcheckbox As MSForms.CheckBox
'selects the summary page Sheet1.Select
For i = 7 To 65 If Cells(i, 3) "" Then..................
I have a userform that has a multi page on it with 4 pages. I notice that there is no way to have the individual pages be set to a click event- or none that I see anyways. What I am wanting is for a series of events to happen based on what page the user chooses from the four (like a userform initialize type event).
I figured out how to populate the ComboBox, but I have to manually step through the code to do it. How do I get it to populate the values when the spreadsheet is opened?
Then, what I want to do is have the cell formula depend on one of two selections in the ComboBox.
Dim mdNextTime2 As Double Dim mdNextTime1 As Double Dim mdNextTime As Double Dim myCount As Integer Dim myC As Integer Sub If (myCount Mod 5 = 0) Then end IF end Sub
Now, when myCount is multiple of 5 it should go inside that loop. Instead it goes inside immediately, also when myCount = 0 So I decided to initialize myCount to 1. But the strange thing is that I don't know how?
If I write: Dim mdNextTime2 As Double Dim mdNextTime1 As Double Dim mdNextTime As Double Dim myCount As Integer = 1 Dim myC As Integer
I am running into the error, "Procedure too large". I know I need to break the range down into Arrays, so how can I hard code the values into an array? I cannot find an example to follow. Ranges: D:E,K:L,O:P,....etc. I know I can break the rows up into an array too, but one thing at a time. Here is an example of the range for D:E.
I have a userform on which there is a frame containing 8 option boxes. After a query, the results are displayed in the form. If I have a value of 1 in a cell, optionbox1 is checked; a value of 2 checks optionbox2, etc. It works great EXCEPT when first initialized. At that point, it checks the last optionbox, even if the number is 1. I have built a next and previous feature to scan the data, and when I return to the first entry, the correct box is checked. I tried coding blanks into the fields prior to populating them, but I still get the same results. Is there some explanation available so that I may remedy this? I'd really like the first piece of data to be correct.
how to declare&initialize a variable as Global in vba?
I have a variable , listGroup=Array("aaa","bbb","ccc") now i am using this variable for 3 different functions. so what i am doing is wrote the same code to 3 functions, so how i can declare&initialize this variable as global and access to all functions.
When the userform is loaded, I want the data in each range to be available in the dropdown for each respective combobox. It would be great if spaces can be removed from each list, but from what I read, this may be an issue.
I have a total of 648 textboxes on my form. Some of the textboxes allow for char values, some numeric and some monetary. The problem I am running into is with the monetary. I am trying to say on initialize, I want to autoformat 208 of these textboxes to $0.00 and when the users puts in an actual amount it changes to $100.00 or whatever the amount. It would be ideal to just have the textbox blank and when the users puts in something it is formatted automatically to $100.00. Just like I would if I were formatting an Excel column or cell. Here is my code so far: (hopefully no typos in code. Cannot copy and paste as using home computer. My work computer blocks the excelforum site.
When opening a workbook, I'd like to set a Toggle Button's value to TRUE. I already have code Workbook_Open() procedure which resides in the ThisWorkbook module. This Workbook_Open() procedure already does lots of other things. I would like to add code in Workbook_Open() that would set the Toggle Button's initial value (TRUE).
The code for the Toggle Button resides in one of the Sheet modules (not the ThisWorkbook module). I attempted to set this toggle button value using the following code (see row 10), but it does not pass the compiler due to not being a defined variable.
When running a script within Excel, is there a way to cause the script to initialize or open an application other than Excel? For instance: If I desired to have the script open 'C:program.exe' is there script available for this?
I have a userform used to insert new vehicle details onto a spreadsheet. below is the code used in two of the boxes to choose the service intervals and the engine type. There is another combobox on the form, however when I try the same type of code for more than 1 box I receive an error on the "Sub Userform_Initialize" line. I assume I need to change something on the 'Sub' line but I cannot figure out what!!
I have created a userform and a command button to bring up the user form but when I click on the command button and the user form pops up I am not able to enter any data, the entire page freezes
This is the code
Private Sub CommandButtoncancel_Click() unloadme End Sub Private Sub CommandButtonOK_Click() With Workbooks("RETS results version 2.xlsm")
This is weird - if you delete a sheet that contained a control then
a. showing a modeless userform resluts in a userofrm that goes invisible at subroutine End b. public variables lose their value
These things do not happen if the sheet did not contain a control. Attached is an example file - put the inputfile.xls in your default file location (or add a path in the code) then open the ProblemDemo.xls and run the main macro to see it fal - isthis another Excelbug I've found?
I have several non-modal userforms in my App, some of them have date-fields that require manual entry typing of dd/mm/yy etc (No single userform has more than one date-box in it, this I think may be pivotally useful)
Now the Userform 'Calendar' that is built on the class of the same (cCalendar) name, has the write value line 'ActiveCell.value = theCal.value'
I'm looking to change this to refer to the correct userform.Textbox value, depending on which form is open.
I would imagine I could simply have a global string, whose value is set (or re-set) whenever a Userform is initialized (some sort of 'ActiveUF.value = Me.Name), where I get lost is referring to the components by name, so as to have a case statement by where I go:
Code:
Private Sub theCal_AfterUpdate() Select Case ActiveUF Case "AddForm" application.vbe.components("AddForm").controls("AddFormDatePicker").value = theCal.value Case "EditForm" '.... etc end select end sub
better way of doing this (instead of passing around the userform name as a variable) - or proper syntax for referring to controls outside of the 'active' userform (but an open userform nonetheless)?
Every time I have to do this particular thing with userforms, I completely forget how, and the object browser always leads me on an infinite loop of Application.vbe.activevbproject.vbcomponents.vbe.active....
PS - there may be one slight complication to the process - one of the forms, has a 2-tab page in it, each page having similar (but named differently) fields. So I may need to be able to throw in 'Activepage' or whatnot
I Have a Userform which Have My Data i Print User Form Using Print Command Button And My Code Is
[Code] ......
But Its Printout Whole Form I only Wants To Print contents of Text Box's Or only Text From Userform TextBox. How To Print out Only Content of User Form Not The Whole Form ...
What I would like to do is to be able to open a second workbook from a user form, preform some work on it then save and come back to the same place in the original user form.
So in steps:
1 : user clicks command button to open user form 2: user then clicks on command button on userform that opens 2nd workbook via a yes / no message box, but closes userform on 1st workbook (would be ideal if this could stay open, but hidden) 3: user then does work on 2nd workbook, 4: userform on 2nd workbook saves then activates the 1st workbook and reopens the userform
This is where no matter what I try I cant get the command button on the 1st userform to be clicked automatically so the yes / no message box appears.
This is part of the code in the 2nd sheet commandbutton that saves / closes / opens
Code: Unload Me ActiveWorkbook.save Windows("ABC.xlsm").Activate Sheets("Request Sheet").Activate Call Sheets("Request Sheet").ForceClickOnBouttonXYZ Call UserForm1.CommandButton6_Click 'this is where I cant get it to work!! Windows("xyz.xlsm").Close ABC is the 1st workbook xyz is the 2nd workbook
This is the code on the 1st workbook I use to call on the 2nd workbook
Code: Public Sub ForceClickOnBouttonXYZ() Call CommandButton1_Click End Sub
Private Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer) If CloseMode = vbFormControlMenu Then Application.ScreenUpdating = True Unload Me RestrictedOptions.Show Else Cancel = True End If End Sub
Trying to use above code to unload active userform and show new userform when red X (close) selected by operator. With the code as is, the Unload Me leaves the form on the screen and displays the RestrictedOptions form. If i remove the Restrictedoptions.Show, the Unload Me does remove the original form.
