iam trying to open a workbook from a forms textbox.text value. i have got this so far
Private Sub cmdOpenProject_Click()
Workbooks.Open Filename:="C:Documents and SettingsOwnerDesktopExcelStuffTextBox1"
End Sub
have also tried
Private Sub cmdOpenProject_Click()
Workbooks.Open Filename:="C:Documents and SettingsOwnerDesktopExcelStuffTextBox1.text"
End Sub
File open dialog box, Get the path to textbox? ...
View 7 Replies View RelatedI have an existing spreadsheet with a column of strings (actually VIN numbers). These numbers correllate to a bunch of text files, that can exist in one of three folders (UsernameDesktop1, 2, or 3) on my desktop. What I need the macro to do is:
1) get the filename from A2 (A1 is a heading row)
2) Find the appropriate text file in one of the three folders
3) Put the folder name into I2
4) Scan the text file for some strings, and copy some data that follows those strings into J2:O2 (I can handle programming this)
5) Close the text file
6) repeat above for the remainder of filenames (about 1800 files)
I have a listbox on userform1 with multiselect and i am trying to populate the selection into textbox1 on userform2.
View 6 Replies View RelatedI'm using forms toolbox to add textboxes on an user input sheet for my workbook.
There would be 3 textboxes included in the group box added to the user input sheet.
I'm struggling with the code to accomplish the following:
Textbox1 - is a % input. I would like the input to be formatted to 2 percentage points. In other words, if someone enters 2, it will show as 2.00% and I want the 2.00% to be recognized as such in the spreadsheet calculations. In other words, the input is used in the calculations in another sheet.
Code thus far (and I may be offbase on this):
Private Sub TextBox1_Change()
Sheets("Sheet2").Range("rate").Value = TextBox1.Value
End Sub
Problem - the cursor is not moving and the result of the input is not showing. I would like the cursor to move from textbox1 to textbox2 to textbox3 by tab or enter button.
Textbox2 - is decimal input. I would like the input 5, it will formatted to show as 5.0. This input is used in the calculations in another sheet.
Private Sub TextBox2_Change()
Sheets("Sheet2").Range("multiple").Value = TextBox1.Value
End Sub
Textbox3 - is a result box based on the inputs from textbox1 and textbox2. I would like the result to be shown to the user in this textbox3 and for it to be greyed out and not to accept any inputs from the user.
That is, it is not an input box but rather a results box.
I've encountered a bit of an odd one. I am opening a tab delimited file, which has been sved as an xls. When I open from file manager, it opens correctly. When I open from Excel, I have to go through 3 screen dictating how the data is set up, and the end result is that a couple of the numbers come through as text, rather than numbers.
Failing an explanation - how do you open workbooks as file system objects - currently I am opening them using
Workbooks.Open Filename:=wb.Path & "/" & ws. Range("B1").Value
If I open them by mimicking the FM, perhaps it will work OK.
I have 1 main userform and I need to open another userform using a command button from within that 1st form. The 2nd userform appear right in front of the 1st userform. When the 2nd userform is closed either via VBA or clicking on X, it closes both forms.
why this happens and how I can make only the 2nd form close when it is finished with?
I'm using excel to parse txt a file with account numbers in it. If it finds a dodgy number I want it to delete the entire line in the text file. I have manage to write the code that opens the file and locates the dodgy numbers, however I'm not sure whether it is posible to select the line and delete it.
View 6 Replies View RelatedI am trying to open a txt file, but I get an error message that says "Run-time error '52': Bad file name or number. The file name is correct. I tried two ways to pass the name -- as a variable and from Application.GetOpenFilename("Text Files (*.txt), *.txt"). The line where VBA complains is "Open fileToOpen For Input As #InFile"
View 3 Replies View RelatedI have an userform where the user browse to input an text file, how do i open the text file from the given path in and excel format in VBA?
View 8 Replies View RelatedI am writing a macro that creates a text file and inputs data into it with a for loop. Is it possible to actually open the text file window after entering the data so that the user sees whats inside the text file?
View 8 Replies View RelatedI have created a macro that auto generates SQL code based on user input from a worksheet. The SQL script is written to a text file. I would just like to visually open the text file with notepad when the macro is finished executing.
View 2 Replies View RelatedI have a large text file (greater than 64k lines) which I need to import into excel. I only need anything imported from the text file that is for dates I specify. So I would like to run a line by line query and only import the lines I need.
The dates are always in position 43-50 (dd-mm-yy) in the text file itself, so the code would have to look at that section, see if the date is within the range specified and only import if it is (and then move onto the next line).
I work for a company that has about 650 locations. Each location has a location manager that is responsible for submitting a Performance Review spreadsheet for all the employees at their location.
Currently I have an Excel file that has all employees/locations. One of the columns on my spreadsheet is "Location ID"...which is literately a number we've assigned to our Locations. I have an Excel template saved that I'd like each Location to open into.
Can someone help me? I need each location to be it's own spreadesheet...which I have a template created already. I'd prefer to find an automated way to do this...rather than manually creating 650 spreadsheets.
I'd prefer to do this in anoter application, such as MS Access, but senior management already made the decision this will be done in Excel...so I'm stuck with what I got.
I am writing some code to open up a file and use the text import as the files are data files. i currently have
View 4 Replies View RelatedI want to create a Macro to open a file based on the data of a particular cell to update the data for macro file from that file.
For example I have 3files named Dept1, Dept2, Dept3 and I have one more file named Cost Sheet which contained macro and based on the cell D2 of my macro file I need to open the particular file i.e Dept1, Dept2 or Dept3 and the updated procedure and cell ranges are same for all file
1. Open a text file from a directory on my computer
2. Feed the data into a Excel spreadsheet
3. Parse the text from the text file into columns
an example of some of the stuff in the text file (its all fake btw )
192.168.1.216,,,
J2MARTIN,20/08/1999,8:57:27 a.m.,
372,http://www.microsoft.com/isapi/redir.dll?,,
192.168.1.216,,,
J2MARTIN,20/08/1999,8:57:27 a.m.,
326,http://home.microsoft.com/,,
192.168.1.216,,,
J2MARTIN,20/08/1999,8:57:29 a.m.,
37014,http://www.msn.com/default.asp?,,
Is it possible to feed all this data into excel into seperate rows and then start parsing it into columns of
IP Username Date Time KbUsage URL
I have a folder that has a bunch of text files in it with numeric names (they are store numbers 2, 3, 165, 188, etc...). I need to open those files (in excel), run a macro on them (this portion of the macro has already been created), and then save them with the same name as the txt file but in an xls format and close. It would be great to have the whole folder process automatically but I am willing to start small. Further, I'd like it to not ask for a filename, and I don't want to see the SaveAs dialog box. So far I have been able to get the macro to run through the my processing of the text file all the way to the SaveAs portion, but the code in my macro opens the SaveAs box and puts the filename of the txt file in the file name box in quotes with the txt extension. Below is the code.
Sub Macro3()
sFile = Application. GetOpenFilename( _
fileFilter:="Text Files (*.txt), *.txt", FilterIndex:=1, _
Title:="Open Workbook")
Workbooks.OpenText Filename:= _
sFile, Origin:= _
xlWindows, StartRow:=1, DataType:=xlFixedWidth, FieldInfo:= Array(Array(0, _
1), Array(5, 1), Array(26, 1), Array(35, 1), Array(39, 1), Array(46, 1), Array(51, 1), Array _
(58, 1), Array(75, 1), Array(87, 1), Array(91, 1), Array(97, 1), Array(99, 1), Array(111, 1) _.....................
When I export data from .csv or .tsv file to .excel file then all the preceding zero's disappear and the code 0010 display's like 10.
I know I can manually import data from csv to text(option "fromtext" in excel) but i want to do it automatically.
I have below code apearing couple times in my macro and I'd like to make a variable.
Plese see belowe
Workbooks.OpenText Filename:= _
"S:ReportsMy ReportsGuidefilename20080430", Origin:=xlMSDOS, _ ' filename should be another variable as it referes to different files
StartRow:=1, DataType:=xlDelimited, TextQualifier:=xlDoubleQuote, _
ConsecutiveDelimiter:=False, Tab:=True, Semicolon:=False, Comma:=True, _
Space:=False, Other:=False, FieldInfo:= Array(Array(1, 1), Array(2, 1), Array( _
3, 1), Array(4, 1), Array(5, 1), Array(6, 1), Array(7, 1), Array(8, 1), Array(9, 1), Array(10 _
, 1), Array(11, 1), Array(12, 1), Array(13, 1), Array(14, 1), Array(15, 1), Array(16, 1), _
Array(17, 1), Array(18, 1), Array(19, 1), Array(20, 1), Array(21, 1), Array(22, 1), Array( _
23, 1), Array(24, 1), Array(25, 1), Array(26, 1), Array(27, 1), Array(28, 1)), _
TrailingMinusNumbers:=True
Is there a way to open a text file from Excel 2010 and specify that I want it in .xls format?
I am working in compatibility mode, and expected that when I opened a text file from code within an xls file, the text file would have 65,536 rows, but it has 1,048,576. This causes a problem when we try to copy the sheet with the data from the text file, and insert the sheet into our xls workbook. See code below. The error is: Run-time error '1004': Excel cannot insert the sheets into the destination workbook, because it contains fewer rows and columns than the source workbook..
I know I can get the data other ways (such as copying and pasting only the cells containing data) but I was hoping to make minimal changes to the code below as I will have to make it across several templates. Specifically, I was hoping that there was a qualifier I could add to the Workbooks.OpenText statement after "Tab:=True" - Perhaps something about opening the text file in File Format 56. However I have not been able to find out how to do that.
Code:
.....FileToOpen = Application.GetOpenFilename("All Files (*.*),*.*,GeoTAC Files (*.ctf),*.ctf, Â_
Text Files (*.txt),*.txt,Excel Files (*.xls),*.xls", 1, , , False)
Workbooks.OpenText Filename:=FileToOpen, _
[Code].....
I have a tool file which contains Excel VBA codes. When I click button it asks to select a file. I want that anytime I click the button the dialogue box should open in the folder containg the tool.,
View 1 Replies View RelatedI am trying to work out how i can run a macro on an 'initializing event'...which is caused by when I click on a certain Forms ComboBox.
This drop down box is a shape and it is called "Drop Down Box 11"
so was hoping to write something like
The box is linked in with Cell E56
so have put in my code as
VB:
Private Sub Worksheet_selectionChange(ByVal Target As Object)
If Target.address = "$E$56" Then range("f56").value = "Yes" etc...
but it still allows me to click on the combo box and change my pick but it still doesn't initialize the event.
I used a label from the forms toolbar and can't seem to change the color of the text.
View 5 Replies View RelatedI want to create a macro that will “open the look in list” and stop so I can pick a file to open. I’ve tried to use “record a macro” and “ctrl-o”, but the record a macro won’t stop until I pick a file or cancel the file list. I also tried to use “o” in the short cut key box
View 5 Replies View RelatedI have some daily text files in a folder (so about 30 of them each month), which in the end of month, I need to open them up in excel, format them so that I can use the information for my analysis.
I would like to create a macro, to quickly open them all up at once and save them each individually in .xls or .xlsm format.
I am new to VBA and after some research online, I was able to have the files open with the following code. but now I don't know how to proceed further to save them one by one with the same name but in .xls or .xlsm format.
Sub Opentxtfiles()
Dim MyFolder As String
Dim myfile As String
[Code].....
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
View 5 Replies View RelatedUser Form Basics - Populating Text Boxes. A few tweaks later and its reading the data just fine. Some of the specific form objects and range names have changed, but it's the same logic.
Anyway, this isn't just for display. I need to export the data back to the spreadsheet. So, I plugged this line into the event handler for the "Save & Exit" button on the sample form in the other thread:
Code:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
Looking for a macro to insert a textbox with the textbox containing a formula rather then text.
Sub AddTextBox()
ActiveSheet.Shapes.AddTextBox(msoTextOrientationHorizontal, 2.5, 1.5, _
116, 145).Name = "Textbox1"
ActiveSheet.Shapes(1).Select
Selection.Formula = "=Manpower!R[3]C[1]"
End Sub
I tried this but I cant get the formula portion to work... I just want to insert a macro with that formula....
