i am trying to use a look up formula to populate a textbox on a userform. this is the code but obiously does not work
Private Sub TxtbName_Change()
TextbName.value = LOOKUP( 'CLOCK NUMBERS'B7,'CLOCK NUMBERS'!B1:B530,'CLOCK NUMBERS'!A1:A530)
End Sub
I have 2 macros: 1 controlled by a checkbox activex (PA_03) and the other a combobox (PA_03_rows) in a worksheet. I display the results from PA_03, and the user than then increase or decrease the number by using the combobox. But when I change the value (PA_03_rows.value = x) it causes the macro to jump to the macro.
I don't think it did initially, but it does now. According to another post, I saw it shouldn't do it! Is there something I'm just not seeing here?
Private Sub PA_03_Click()
Dim message, title, default, numberRows
Dim PA_rows As Integer
Application. ScreenUpdating = False
TakeFocusOnClick = False
Worksheets("sheet1").Select
ActiveSheet. Range("a15").Select
If PA_03.Value = True Then Goto Unhide:
If PA_03.Value = False Then Goto Hide:
Unhide:
message = "Enter the number of input rows required (1 to 50)"
title = "Non-Featured Standard Input"
default = "1"
I have a rather large userform with numerous textboxes and comboboxes. Data entered into the text and combo boxes is written to the next empty row of a sheet. As the data to be entered into the next row may not "all" vary from the last I would like to have the data I have last selected or entered remain in the textbox or comboboxes for the next. I attach an example for a better explaination.
View 6 Replies View RelatedIn Excel 2000 there seems to be a problem with setting the focus in a UserForm TextBox if the SetFocus method is applied in the same submodule as the UserForm.Show method. Microsoft's circumvention for this is to put the SetFocus command in the form's Activate event submodule.
This seems to work OK except when the TextBox you are applying the SetFocus to is the first control inside a frame. It works if the TextBox is not the first control, and it can be circumvented by first setting the focus on a subsequent control then switching the focus to the intended control.
However, the circumvention is not that useful if there is only one TextBox control in a frame or, as in my current project, if you try to create a generic piece of code to validate controls from multiple forms and set the focus from within the generic code.
Does anyone know of a way over overcoming this problem and being able to directly set the focus to the first TextBox inside a frame?
When I select in my combo box I would like it to populate fields. That part is fine. When I try to input I want it to input in corresponding cell to the combo box selection i made. Problem is I can only get it to input in a certain cell not cell corresponding.
Option Explicit
Private Sub ComboBox1_Change()
Sheets("Sheet1").Select
Dim iRow As Integer
If Me.ComboBox1.Value = "" Then Exit Sub
iRow = WorksheetFunction.Match(Me.ComboBox1.Value, Range("People"), 0) + 1
Me.TextBox1.Value = Cells(iRow, 2)
Me.TextBox2.Value = Cells(iRow, 3)
End Sub
Private Sub CommandButton1_Click()
Me.Hide
Unload Me.....................
If this control is a TextBox, I would like to read the Text property,
and if it's a ComboBox, I would like to read the Value property.
Public Function readValue(c As Control) As String
If (TypeName(c) = "TextBox") Then
' convert the Control to TextBox then put readValue = c.Text
Else
If (TypeName(c) = "ComboBox") Then
'convert the Control to ComboBox then put readValue = c.Value
End If
End If
End Function
I am trying to store some information in a cell from a UserForm. The two sets of information I have are:
InvoiceNumber(number with no decimals)
InvoiceAmount(currency with two decimal points)
The problem I get is when I use the following command to store the information, it stores the information as text rather then a number.
Worksheets(CustomerName).Range("C" & Position + 1).Value = InvoiceNumber
Worksheets(CustomerName).Range("E" & Position + 1).Value = InvoiceAmount
I tried using the NumberFormat option as below, but it doesnt fix the problem.
Worksheets(CustomerName).Range("E" & Position + 1).NumberFormat = "$#,##0.00"
Worksheets(CustomerName).Range("C" & Position + 1).NumberFormat = "0"
I am using a form textbox on a worksheet. I have the textbox positioned where I need it to be but when I print the worksheet the textbox moves out of position.
I have an excel workbook where on several of the worksheets I have Control Toolbox Textboxes inserted into the sheet. The Textboxes are for when a user wants to type notes onto the worksheet.
My issue is that the Textboxes do not allow the user to edit the font because the VBA project is locked.
How can I allow users to edit the font in the Textbox without giving the VBA password away to the user?
I have made a userform where I calculate how long time an operation takes. If the time fe.g. is 25 hours and 24 minutes then I get the result 1:24. I have attached my userform as it looks now. If you write 540 in the bar and 550 in volume and press "Beregn" then "Norm tid + 10%" will write 1:24 and not 25:24. Is it possible to have the Userform to write 25:24 or 1day and 1 hour and 24minutes?
View 2 Replies View RelatedI have a workbook that has multiple spreadsheets. Data is added to the spreadsheets using userforms for each spreadsheet. I have created a pop-up calendar to add dates and want to know if there is a way to add dates without having to create multiple calendars for each txt field on each userform. I would like it so that when I click on the calendar it would put the date into the text field it was launched from.
This is the code in the calendar which only puts the date into the field named Dat_Clsd.
Private Sub CMD_Close_Click() .....
I have a userform with a textbox and would like the user to type inside the textbox which in turn send the text typed to a cell on my spread sheet say sheet 1 cell ref A1. I am writing the following into the control source Sheet1!A1 but the control source does not except this. I am using excel 2007 .
View 2 Replies View RelatedThere are a few aspects of the UI I'd like to control in
1. Is there a way to force Excel to select nothing? After a sort by macro, Excel leaves the sorted range selected. I can set it to select a specific cell every time, but I'd rather have no cells selected at all.
2. Can you programatically hide the Formula Bar, Gridlines, and Headings?
3. Can you programatically collapse the Ribbon? (Excel 2007 only, of course.)
The last two are intended to maximize the screen real estate dedicated to the body of the spreadsheet, and I'd like to do it in code so that I don't have to describe how to do it to less skilled users.
Control Code input. I work with Autocad, when I extract data from a drawing into an Excel format (.xls) the extraction does not up date.
What I mean is:
In cad I input 6”%%C L=7” and get 6”ø L=7”. I need the excel file to convert as well. I need to program the cell? How?
I have a form that pulls up. When the person enters in a ticker symbol I would like the VBA code to perform a lookup in a range "Data_Company_Names" (3000 lines long of company ticker sybols and names) and use the corosponding Name to fill in the textbox for the name. If no Ticker symbol is found then the textbox would be blank.
I realize I would have to use some type of Private Sub TextBox1_Change() code but I am not sure how to have it lookup in a range and return the corosponding name to the ticker. For example, when the form pulls up and the person enters AAPL in Textbox1 then Textbox2 value should equal the Apple which is the company name located in the column over from AAPL in range Data_Company_Names
I have created an excel worksheet that will provide budgeting and estimating tools for my project managers. All data used to be manual entry and took a good while to complete. I am trying to automate the process with VBA.
I created a UserForm called InfoVerify1. On that form I have TextBox 1 - 10. When the UF opens, the boxes display project information from my worksheet called "Basis of Estimate", also known as Sheet26.
The TextBox1 ControlSource is set to "E4". When I run the macro with Sheet26 active, the proper information fills in. However, when I am on the Start page or any other worksheet and I run the macro, it tries to fill in the text boxes with E4, etc, from the active sheet. I tried changing the ControlSource to "Sheet26,E4" or any combo thereof with only error messages.
how to get it to refer to a cell on a particular worksheet and hold to that worksheet no matter which sheet I am on at the time I run the Userform?
I have an excel sheet with cols of information e.g IDNo, FirstName,LastName etc. I have created a form in VB where you enter the IDNo (& Click on a command button called View) It should populate designated textboxes on the Form. Thus it should check the col where the IDNo is stored, find the IDNo and populate the adjacent cols i.e FirstName, LastName in designated textboxes on the form.
View 3 Replies View Relatedi have a spreadsheet that uses control functions to run vb code. i am trying to make things as user friendly as possible for all of the employees. i am currently working on a control to clean out any rows that the first cell has a value of "N/A" or is left blank. i have the code for the blank cells, but cannot figure out how to add the "N/A" cells.
here is the current
Private Sub CommandButton2_Click()
Dim rng As Range
On Error Resume Next
Set rng = Columns(1).SpecialCells(xlBlanks)
On Error GoTo 0
If Not rng Is Nothing Then
rng.EntireRow.Delete
End If
End Sub
I have created a user form and I am trying to get the active control colored. I am using the code from Mr Excel's VBA book - starts on page 454, and I have entered all the code, but now when I activate the user form I get an error ....."Compile Error. Invalid attribute in Sub or Function." and when I click OK, it takes me to this line of code.....
Private WithEvents objForm As clsCtlColor
In the book, this is where I am supposed to start entering the code "behind the userform" rather than in the class module. So, I assume this means that this code goes with all the other code for the user form (in VBA project click on form, then view code). Am I wrong? Should I be adding a module? Not sure what I am doing wrong.
Here is the code I have in the class module....
Public Event GetFocus()
Public Event LostFocus(ByVal strCtrl As String)
Private strPreCtr As String
Public Sub CheckActiveCtrl(objForm As MSForms.UserForm).......
is it possible to choose an option button which will then perform a calculation on a cell reference? I’m trying to deduct a percentage from a total when an option button is highlighted.
View 5 Replies View RelatedJust trying to figure out if it's possible to add to an existing piece of code via a TextBox value. Basically I have the below code and each time a new entry is made I'd like it to automatically add some more to it.
Case "Whatever"
outsh = "Whatever"
Case "Happens"
outsh = "Happens"
Case "I'll"
outsh = "I'll"
Case "Keep"
outsh = "Keep"
Case "Trying"
outsh = "Trying"
Case ":)"
outsh = ":)"
I would like to add these two lines when a new entry is made.
Case "New_Name"
outsh = "New_Name"
A link or pointer in the right direction'd be tops. btw the code is married to a Command Button which has more code involved.
I have a userform and I want a textbox that counts cells J7,M7,P7,S7,V7. Does anyone know how to write this code and where to put it. All I want is the textbox to show how many cells of these five have data in them and I want it to update automatically.
View 9 Replies View RelatedI am working with Windows Vista, and Office 2007 and am trying to figure out what should be a simple line of code to copy the text from 2 textboxes on an excel sheet to a separate textbox located on another worksheet.
The code I am trying keeps giving me the debug error, saying
Here is my full code; runtime error 438, object doesn't support this object or method.
Private Sub Workbook_Open()
Worksheets("Summary Page").TextBox3 = Worksheets("Description").TextBox1 & Worksheets("Description").TextBox2
End Sub
Trying to make a error checking macro (if field is blank, then erro prompt and change textbox backcolour to red). However, I have a lot of text boxes, and my current macro is
View 3 Replies View Relatedi have 15 textboxes in my userform (all with tags).
instead of having 15 seperate sub routines that call on one macro is there a way i can write some code that, on entering any texbox within a form, a specific routine would be called
i tried using the Userform_click sub like so, but with no joy:
I have some code which adds a series of textboxes at runtime depnding on some info on my spreadsheet.
Due to these textboxes being added programmatcally, they curently have no macro's assigned to them.
I was wondering if there was a way of adding code to the textboxes at runtime.
Dim choosebefore As MSForms.Control
Set choosebefore = Me.Frame1.Controls.Add("Forms.Textbox.1")
With choosebefore
.Name = "Before" & i
.Left = 0
.Top = (((i * 18) - 18) - 8) + 6
.Width = 24
.Height = 15.75
.Visible = True
.TextAlign = fmTextAlignRight
.Text = Chr(149)
.SpecialEffect = fmSpecialEffectFlat
.BorderStyle = fmBorderNone
End With
I am trying to do the following.
When Userform2 fires up - there is a textbox.
I would like the textbox1 to be filled by:
Taking the Selected or Active Cell in Sheets("positions"), eg, L5
but then finding the exact Cell match in Sheets("price"), eg, also L5
and placing this cells Value in Textbox1.
The 2 sheets are exact mirrors but contain different data.
i have a userform named: usf_History.
i would like to refresh all the text boxes (they either refer to cells or are calculations)...?
I have enclosed a picture of my problem : Diagnostic Notes Generator Example.jpg
The treeview on the left-side panel will populate with different options based on what is chosen from the "category" combo box.
Based on the category chosen, different "troubleshooting steps" will be presented in the Treeview List.
As each selected tree node is mouse clicked...the text values needs to be copied into the adjacent text-box.
My question, what is the code to copy a Treeview item over to a text box?
This code repeats for each of my 18 UserForm TextBoxes. Is there a better way?
Code:
If Trim(Me.TextBox4.Value) = "" Then
Me.TextBox4.SetFocus
MsgBox "Enter a Score for #1"
Exit Sub
End If