I have made a userform where I calculate how long time an operation takes. If the time fe.g. is 25 hours and 24 minutes then I get the result 1:24. I have attached my userform as it looks now. If you write 540 in the bar and 550 in volume and press "Beregn" then "Norm tid + 10%" will write 1:24 and not 25:24. Is it possible to have the Userform to write 25:24 or 1day and 1 hour and 24minutes?
View 2 Replies
I have problem to calculate the time which is more than 23:00:00hrs in a file. I need to compare the benchmark time and the difference of time(start time and end time) and show pass/fail depending on benchmark set time. For few of the times which is more than 23:00:00 hrs the format is taking different(example: for 49:15:48, it is showing 02/01/1900 01:15:48 in formaula bar) for which i am not able to use formula and know pass/fail.
View 4 Replies View Relatedhow to roundup and total time using formula? specifically with the format mm:ss:0? i have 3 columns with these formats and would like to add them up but can't seem to get the right formula.
View 4 Replies View RelatedI have an excel spreadsheet where you enter the start time and end time for job function. Since some of the times cross midnight, I use the formula J3=IF(I3>H3,I3-H3,1+I3-H3) where I is the end time and H is the start time (format hh:mm). This part works fine, however when I sum column J and change my format to Time 37:38:00 (since it is over 24 hrs), it returns a large number of 2234:48:39 which should be closer to 223:00:00.
View 2 Replies View RelatedThis is for employee time sheet and schedule. I have multiple employees work a specific shift on various days. I need the calculate the hours worked each day and then have them totaled at the end of the period. Here is and example:
Employee Monday Tuesday Wednesday Thursday Friday Saturday Sunday Total Hours Total Cost
John Smith 10-5 12-6 9-2 5-10:30 3-8:30
How do I get it to calculate the difference in the same cell, convert it to hours, add up all the results and place it in the totals columns then calculate those totals by their pay rate to get my Labor cost?
Is there a way to calculate the number of hours between two times specified like this:
Start
End
Hours
Comments
Mon 6:00p
Mon 9:00p
3.00
Same day
[Code]..
I think I can write a UDF and that may be the easiest. Is there a straightforward way without a UDF?
Im trying to calculate hours and minutes between two dates/times over more than 24hrs. I have:-
A1 is 18/10/08 13:14, B1 is 20/10/2008 12:20, C1 is 1:23:05
Using the formula C1 =INT(B1-A1)&TEXT(B1-A1,":hh:mm")
But what I really need is just Hours and Minutes so the above should read 47:05.
I need to calculate billable hours.I have a start date/time and end date/time.Then I need to subtract out all time between 05:00:00.000 and 20:00:00.000. These are not billable hours.But I can include all weekend time.And I can include all holiday time.I need to accomplish this with formulas, no macros.
View 2 Replies View RelatedI got a problem with a time calculation, if it's even possible.
I want to calculate the amount of hours that have been woork in a slot.
Example:
First slot is from 08:00am till 17:00pm, time cost 100%
Second slot is from 1700am till 24:00, time cost 110%
Third slot is from 24:00 till 08:00 am, time cost 120%
I'm working from 08:00am till next day 01:00am
So my hours are:
9 in slot 1,
7 in slot 2,
1 in slot 3.
Is this possible to calculate in Excel?
I got a file attached with a sort of layout.
I need to calculate the hrs between two date and time and deduct any time outwith the hrs of operation (09:00-19:00), if the date and time falls outwith these times.
I have used the formula 24*IF(A2>G2,G2+1-A2,G2-A2), where G2 IS 21/04/2008 11:45 and A2 is 20/04/2008 00:22, but can't get it right.
I have call data in date/time 06/07/08 2:00 PM custom format for a 2 month period. I have my regular opening times eg Monday 9-3, Tuesday 10-4. For each call I want to know if it was made during opening times or not.
View 7 Replies View RelatedIt's been several years sine I had to look at calculating amount of time worked.
Can you please look at this old spreadsheet of mine and verify that the formula is correct?
It appears to be ok to me, but I don't want any errors when it comes to paying my employees
Formula: ...
I need a formula to calculate hours worked between specific times. In the worksheet I have, I need to calculate the hours worked between 5am and 10pm, the start time is in C7, and the finish time in D7 the formula need to be in H7, and another formula in I7 to calculate hours worked before 5am and after 10pm .
C
D
F
H
I
Start
Finish
Total
Ordinary
20%
4:00
23:00
19:00
17
2
I have a UserForm that Dead Head Miles will be entered into one text box. The Trip Miles will be entered into the second text box I would like for the user form to show the answer after the first entries are made something like this:
1)Dead Head Miles 20 +
2) Trip Miles 500
----times---$2.00
3)Projected Rate $1040 --show this after the DH and Trip is entered and Multiplied by $2.00
Format Time Cell For Greater Than 24 Hours: Hours & Minutes Only .....
View 9 Replies View RelatedIn column A I have a date AND time entered. By the way, this is not via cell format, I have manually entered, say today's date and the current time. In column B I have a future date and time.
Basically, column A is the date and time a problem was given to me. Column B would be the date and time I resolved the problem. Now for the formula....Column C needs to spit out whether the problem was solved between 24 and 48 hours OR less than 24 hours OR greater than 48 hours.
The below formulae allows me to see the difference between two dates and only returns the difference in working hours ie :
Difference between
02/02/2010 08:00 & 03/02/2010 08:00 is 16 Hours 0 Minutes
=(INT(A3)-INT(C6))+MAX(MOD(A3,1)-MAX(MOD(C6,1)))
The following displays it in the Hrs and Mins format
=TEXT(B15,"[h]")&" Hour"&IF(OR(TEXT(B15,"[h]")+0=0,TEXT(B15,"[h]")+0>1),"s "," ")&MINUTE(B15)&" Minute"&IF(MINUTE(B15)1,"s ",""))
A1 is 10 (10 hrs worked) , A2 is 10:30am (in time), A3 is 9:00pm (out time), A4 needs to be the total hours and minutes between A2 and A3 based on the hours listed in A-1. What i need is a formula that will calculate the hours and minutes between the 2 times based on hours entered in A1 but that will also compensate for a manadatory 30 minute lunch that needs to be deducted from the total hours if hrs listed in A1 are more than 6.
example: worked 10HRS, 10:30am to 9:00pm, Total hrs is 10hrs 30min, which should be just 10 since the lunch is a none work time and must be subtracted.
If a person worked more than 6hrs, they must take a lunch. if they worked less, than 6 then they don't have to. I need a calcuation to recognize the greater than, less than factor into the equasion also.
Lunch is not paid. Holiday and vacation hours get calculated at the regular pay rate. Overtime is anything in excess of 8 hours per day and/or in excess of 40 hours per week and/or over 5 working days per week. Saturdays for most the employees will be overtime because it will be their 6th workday of the week; but it will be regular time for one employee as it will only be his 5th workday of the week.
For accounting and payroll purposes, we need the totals to display in both hour and decimal format.
So far, I have Lunch, Regular and Overtime hours figured out, but I still need to work with Saturday, Vacation and Holiday hours. Also, currently, the time in and out has to be typed in with the colon and AM or PM. Is there another way to input the info without having to type in those items? I'm trying to make it as user friendly as possible.
I'm having difficulty to calculate hours between 2 or 3 days exclude non working hours.
Attached is the example of start date with time & end date with time.
The situation is like "when the case log in till the case assist in working hours." so i will get the hours from case log to case assist.
Testing.xlsx
find a formula that will calculate the hours between the two below values but only take in to consideration the business hours (from 9 to 17) and exclude any weekends?
08/03/2013 13:32:00
02/04/2013 09:32:50
I'm looking for a formula that will calculate the difference in times between specific times while working with a 24 hr clock. Please see details below:
E3 provides the start time of 4:00
H3 provides an end time of 15:30
If an employee works betwen the hours of 0:00 (midnight) to 5:59, this is considered DIFF hours and is therefore the number I am seaking. So for the data noted above, the total DIFF hours worked is 2 hours.
I want to be able to count how many instances Primary Price is >= Price 2. And, secondarily how many times Price 1 was, at a minimum, >= to Price 2 and then also >= Price Price 3.
Ultimately I want to compare Primary to 100 or so "Prices" over a years time
I figure it would be a sumproduct function, but can't get it dialed in
I am building a spreadsheet to manage 15 folks wages to be able to know how much money has been spent.
We routinely work 40 hour weeks and have a sheet that automatically multiplies hour work by person (Say A1) times their hourly rate (say A2)
My question is how could I right it a formula that allows me to type in their hour work (A1) if it's greater than 40 hours?
Say A1 is 40, A2 =$20.00, A3 =(A1*A2) $800.00
If the A1 is 43 what would I put into A3 that would automatically multiply the additional hours over 40 times 1.5 A2
I am working on a spreadsheet where I want to count the number of calls to our service desk between specific hours (ie. 6:00 a.m. - 7:00 a.m.) up through 8:00 p.m. I have looked at all the forums and tried all the formulas that seemed to be what I was looking for and it isn't working! I am adding the information to a summary spreadsheet from which I am gathering the information from other sheets in the workbook. This will be an ongoing spreadsheet done weekly for every month.
Examples: I need to know how many calls from these times on a summary sheet.
6:23
6:28
6:59
7:09
7:35
7:38
8:00
8:26
8:34
8:42
8:43
9:02
9:04
9:23
9:27
9:31
10:06
10:23
10:37
10:51
11:05
11:09
11:19
I receive data from a company I deal with that has the date and time of all of my transactions with them listed in an excel worksheet. Only problem is that the date/time that I receive is not in my timezone, which is a bit of a problem for me!
What I want to do is to be able to adjust the date and time shown in the cell forward by 14 hours, so that the data is shown in the timezone that I am currently in. So the end result for the first line of data in the attached file would end up being 2006-08-11,10:28:51 instead of 2006-08-10,20:28:51.
Not sure if this is a simple question or not - is it possible to pass the contents of a userform textbox (which exceeds 255 characters ) to a worksheet cell? It seems to truncate when I try to do so.
View 7 Replies View RelatedI have a userform with a textbox1 on inputting the numbers 1-9 the code fires to open that qty. of worksheets it works fine. But, why if the user wanted to input 10 it reads the 1st number 1 and only opens 1 sheet. I need it to open another userform if 10 or greater is input.
Option Explicit
Private Sub Userform_Initialize() 'CALCULATES # OF SHEETS
ThisWorkbook.Unprotect
ActiveSheet.Unprotect
I am looking for code that will start a macro by counting in seconds prior to an event according to it's due time.
Cell Value A4, A12 A20,( more could be added, depending on how many workers are present at the office at the time)
So if worker A is due to start a task at 1.00 pm, then 45 seconds prior to that event the worker can be notified.
( Cell Values A4 and D4 )
Then there are multiple tasks to be performed and each task is reminded in seconds after or before the set times the events ( Act) is due to start.
The code would keep checking every 1 minute for a new list of events between the hours of 9-5 (Variable)
Basicly we pay single rate between 8.00am and 8.00pm at all other times and on bank holidays and weekdays we pay an enhanced rate. If I can calculate the standard hours then the remainder of the hours are enhanced. Aim to count how many work hours fall between a standard start time (SHS) and a standard end time (SHE) (currently 8.00am and 8.00pm), that do not fall on a weekend and are not a bank holiday.
Column B = Start time (eg 06:00)
Column C - End time (eg 22:00)
Column D= date (from which day of week is derived)
Column E = Y or N for whether it is a bank holiday or not..............
