I have created worksheets search box and want to use Trim Function to avoid spacing error when user enter the sheets name they are looking for and also sheets name in the Activeworkbook.worksheets.name
However the trim Function seems does not work
[Code] .....
This Trim funcion is not working for me for some reason. I have attached a sample file. Can someone help me with this? You can test the macro to see. I just want to delete the trailing blank characters on Column A. Here is the code.
View 14 Replies View Related[data] ...
I am having problems removing "2009-642" from the above text string(s) (doesn't matter which)
This is just a sample line and it is not always in the same place so I am afraid a simple mid function from a set starting point will not suffice, the number is also dynamic in size, location and leading digits.
As a result I have created a formula to get rid of the "1 XS0444499197" part of the formula leaving me with " 2009-642 "
Now unfortunately I need to get rid of the spaces (or what look like spaces) just leaving me with the number but infuriatingly I can not get the trim function to work, so I can only guess that it is not in fact reading these spaces as spaces, and I'm at a bit of a loss how to proceed.
My V-lookups are not working. I have data with extra spaces before or after the word. The table I am looking up does not have extra spaces. I'm trying to to a TRIM(data with spaces) and then copy and paste the values so that the spaces go away and the TRIM is not taking my spaces out.
View 9 Replies View RelatedI've written some code to try to count the number of cells that are not empty and save the result as a variable but sometimes the code seems to think that the cells are empty even though they are not.
The code goes through rows 1 at a time and counts the quantity of cells that are not blank and compares them with a couple other values.
The strange thing is if I execute the actual function =COUNTA(with the range that I am selecting below) the COUNTA function works properly by itself in certain problematic sections of the worksheet.
This code below seems to work correctly most of the time but I've found a few instances where it is not properly counting non-blank cells:
Range(ActiveCell.Offset(0, 8), ActiveCell.Offset(0, 27)).Select
QtyTests = WorksheetFunction.CountA(Range(ActiveCell.Offset(0, 8), ActiveCell.Offset(0, 27)))
why my QtyTests variable sometimes is saved as 0 even though there may be some cells that contain values?
Here is the expanded code:
Sub Macro()
'Global Variables
Dim QtyTests As Integer, ReqTests As Integer, InitQty As Integer, Cork As String, Corktype As String
Dim result As Long, x As Integer
[Code]....
I have written a user-defined function that searches for a small range within a larger range. The function requires two input parameters: the range you are looking for, and the range you want to look within.
For example, I might look for the string of values in cells A1:D1 in a larger range E1:H20. The function returns the row number in the larger range where the smaller range is found.
My problem is this: The function is working fine when I call it from another sub procedure. However, when I try to run it as a worksheet function, I get a "#VALUE!" error. The function pops up in the "insert function" menu, and it prompts for the two input parameters.
I'm looking to use the Find function in order to search through a protected worksheet. Currently I can use it to search, however, I am unable to click on the results to bring me to each instant.
View 2 Replies View RelatedI'm trying to clean up a very large spreadsheet that contains a tremendous amount of empty space.
I tried using the TRIM function to delete some of the additional space within each cell, but it only seems to allow you to update one cell/column at a time.
Is there a way to clean up the entire spreadsheet at once?
Find/Replace all spaces won't work because some cells have multiple words, and they need the space in between.
I'm taking 3 very different reports and consolidating them into one manageable readable form. Only problem is that no 1 report has the same info. I've created a key to form pick up the same information that is read differently. As my spreadsheet grows so do the formula issues. I've had one report that has been the biggest pain to break apart. It takes several things and consolidates them, ex: big 2014 girl - dog 20145
I'm using a trim formula to read the last 5 digits that is the only consistent part of the string. =right(J3,5) to trim what i need to read (20145). this formula works. I'm than trying to preform a Vlookup based on what is returned from the trim. The trim number is located in a separate tab as the "key" 20145 = golden Labradors. formula for vlookup that works by itself, but throws up a blank cell when i point it to the trim cell.
=iferror(vlookup($A2,Info!A:ZZ,2,False)" ")
$A2 = the info 20145 from the trim
Info! = is the tab with my 20145 = golden Labradors
A:ZZ = the range in which i need it to find 20145
2 = the second column where it should find 20145 = golden Labradors
False = exact match.
Why my formulas work separately but not when used together? The Vlookup will work if I type in the number 20145. I don't want to type 20145 anymore. I want to use the trim and have the vlookup notice the number pulled from the trim.
Due to the fact that some of the raw data I get dumped out of my database has leading and trailing spaces it is necessary to trim them. The one part of my code which seems to take forever to run is the section which performs this function on around 22,000 cells in one column. Here is the code I'm using. Is there a better way to do this?
'Set ServiceType = wsTmp.Range("C2:C" & tmpRows)
'
'For Each cell In ServiceType
'cell.Value = Trim(cell.Value)
'Next cell
The thing, with much code, seems to be that the slowness of my computer in executing code is directly proportional to the amount of uptime on the machine. Often a cold start will remedy the issue. Rather than having to do this daily to remedy the situation is there some other remedy to the problem?
"clean" function is not recognized.
Sub ConvertToTrim()
For Each rng In Selection
rng.Value = Clean(Trim(rng.Value))
Next rng
End Sub
what is the function of the (1) within the below trim function.
The value of A2 is "ABC - 123 - Lovely"
Range("A1").Value = Trim( Split(Range("A2").Value, "-")(1))
I have some cells containing imported text with a lot of leading spaces. I try to get rid of them by TRIM'ing those cells, but it doesn't work.
Is TRIM only for trailing spaces?
I am trying to use the trim function to remove unwanted spaces at the beginning of cells that contain an address. The entire column contains spaces prior to the street number/name.
View 14 Replies View RelatedMy requirement is to remove the spaces in the text in each cell in a worksheet. i have used TRIM function for this. Sheet1 will have the imported data and sheet 2 has the formula to TRIM. i have an issue when using TRIM on date format. I have used formula TRIM(sheet1!Ax) for columns 1,2 and 3 and TRIM(TEXT(pcload!D1,"mm/dd/yyyy")) for column 4. But the blanks cells in sheet 1 have a value of 01/00/1900 in sheet2. I need the blank cells to be displayed as blank in sheet2.
Sheet 1:
82909U
AB
121
[Code]....
I have come up with this to Trim all of the data from rows 2:30 removing any trailing spaces after the last word in each cell. The macro takes a couple of minutes to run have I got something wrong that is making it run slowly or does the Trim process just take longer?
Sub TRIM_RANGE()
Dim myRange As Range
Dim myRow As Range
Sheets("CAMPAIGNS_2007").Select
Set myRange = Range("2:30")
If myRange Is Nothing Then Exit Sub
Application. ScreenUpdating = False
myRange.Replace What:=Chr(160), Replacement:=Chr(32), _
LookAt:=xlPart, SearchOrder:=xlByRows, MatchCase:=False
For Each myRow In myRange.Columns
If Application. CountA(myRow) > 0 Then
myRow.TextToColumns Destination:=myRow(1), _
DataType:=xlFixedWidth, FieldInfo:=Array(0, 1)
End If
Next myRow
Application.ScreenUpdating = True
End Sub
I'm coping and pasting data (html) into a worksheet. When I try to format some of the columns as accounting$, number, ect. They won't format. It looks as if there are spaces before and after the data. So I tried the trim and clean function but it doesn't work, so I guess the blank "spaces" are not really spaces.
It gets better...
When I do the same exact copy and paste (as html) on another persons computer, they are able to format just fine, and the "spaces" are removed automatically.
Why is this working on one computer but not the other? Is it a setting that my computer has enabled or disabled? If so, what is it?
Assume I filled some cells of a worksheet (in Excel 2007).
Now I place the cursor in one of the cells and dragged the cursor to the right side. As a result more and more empty columns are automatically added at the right side even I do not enter something. Similarly rows are added at the bottom when cursor is dragged downwards.
Correspondingly the horizontal (and vertical) slider shrinks because the dimensions of the matrix grows.
Is there a menu/function which let me do the opposite?
Something like a trim/shrink function which cuts/deletes all empty columns beginning from the right side resp. rows from the bottom?
.... but not from the left and topmost side.
Using the search macro code below, could someone please help to add in more codes what I'm currently using, and also where to insert it. The Search function works well for what I need and it helps me to locate data. When using the search function somehow it search all sheets within the workbook but I only want it to search an array of sheets when using this macro that is needed to complete the task for what I'm after.
Macro
Public Sub FindText()
'Run from standard module, like: Module1.
Dim ws As Worksheet, Found As Range, rngNm As String
Dim myText As String, FirstAddress As String, thisLoc As String
Dim AddressStr As String, foundNum As Integer
myText = InputBox("Enter the text that you want to search for:", "Start Search!")
If myText = "" Then Exit Sub...................
I'm from Bavaria, Germany. Right now, I am doing an internship for my studies. my problem: I need a search procedure which shows an Input Box where you can enter a word to search for. It should work like the original Excel search (Ctrl-F), but with a simpler design, like with my own Text "Enter your Query" and a Button "Submit Query" / "Quit search". Is there the possibility to Highlight the Search Target? The problem hereby is that this highlighting should not be permanent. That means the user sees the target for which he searched for, the cell highlighted in a different color, etc. But as soon as the user clicks onto another cell, etc., the highlighting vanishes. If there is no fitting match, there should be a MessageBox like "Sorry the Target xyz cannot be found"
View 9 Replies View RelatedI' having trouble using the =IF(ISNUMBER(SEARCH formula to search multiple cells.
I can get it to work to search one cell (as below):
=IF(ISNUMBER(SEARCH("Same",G10)),"No Change",'Aug 09 Matrix'!F10)
(In this case the respone is No Change as Cell G10 contains "Same")
However cannot get it to work for several cells. I have pasted below and highlighted the function I would like it to perform:
=IF(ISNUMBER(SEARCH("Same",G10:R10)),"No Change",'Aug 09 Matrix'!F10)
Essentially the other cells in that row (G10:R10) all contain "Same", however for some reason it is identifying this as FALSE and putting in the data from the 'Aug 09 Matrix' sheet.
I thought I had this working for me but I think I made a change some where that is messing it up. Also my workbook is getting so big that it is getting harder to test each piece. and as I don't exactly understand the "with" command I am hoping that someone can look at this real quick and see where I messed up. so here is the
View 3 Replies View Related application.FileSearch.NewSearch
application.FileSearch.LookIn = Workbooks(ActiveWorkbook.Name).Path
application.FileSearch.FileType = msoFileTypeAllFiles
application.FileSearch.SearchSubFolders = True
application.FileSearch.Filename = "Zone Selling*.xls"
application.FileSearch.MatchTextExactly = True
application.FileSearch.Execute
filecount = application.FileSearch.FoundFiles.Count
For i = 1 To filecount
Worksheets("Run").Cells(i, 1) = application.FileSearch.FoundFiles(i)
Next i
For i = 1 To filecount......................
But it won't list my files which is how the macro was running, it was returning a list of the files in the folder and then running them based on the path returned
Have the following code:
With iSheet
i = .Range("A" & Rows.Count).End(xlUp).Row
j = .Cells(1, Columns.Count).End(xlToLeft).Column
.Range("A1", .Cells(i, j)).ClearContents
[Code] .......
If I use F9 to pause the code before the sort part in blue, then the data imports into Excel from the database and then subsequently pressing F5 sorts the data as required.
However, if I run the macro in a single pass, the data does not sort. Why it's not sorting as expected and how to make it sort as required?
I have an 'Update' Module that search the value of the Userform1.txt_sc.Value in Column B, but I want to search to 2 criteria, how can i amend the below code to search for 2 criteria ( userform1.txt_sc.value & userform1.txt_linenum.value )
View 2 Replies View RelatedI have a formula to find if the Symbol "!" is contained in the a cell. And i want it to input "Undercut Due to Trim Edge" if there is a "!" symbol and blank if there is not. What did I do wrong?
=IF(ISNUMBER(SEARCH("~!",AL57:AV57)),"UNDERCUT DUE TO TRIM Edge","")
I was looking for a final result as follows
21-Aug-09 + 1 = 24-Aug-09 (Day + next 1st working day)
21-Aug-09 + 3 = 26-Aug-09 (Day + next 3rd working day)
I have a workbook with 4 worksheet that store different type of data. It also has a userform that load at start of the application which is to search the data in the workbook. The userform has a combobox where the names of the sheets are stored. when the user selects say Sheet2 in the combobox, it enables the relevant textboxes on the userform and activates the worksheet at the change event. The userform has a search button that searches all the worksheets based on the text entered in a textbox.
The problem: how to search based on 1 textbox. What I want is: say for e.g the end-user selects sheet2 from the combobox, this intern enables 4 textboxes (Name, DOB, Nationality, ID #) on the userform. The end-user should have the liberty to enter data in 1 and/or any of the textboxes. The search should be performed, that if data is only in 1 of any of textboxes then give all rows that fit that criteria and display in a temp worksheet. if say the name and dob is filled by the user than what matches both should be displayed in a temp worksheet. if say dob, name and ID# given so the search button should narrow down to fit all 3 criteria and then display result in temp worksheet. As if mentioned data can be entered in either just 1 or any or all textboxes.
E.g. the worksheet is (Columns are Name, Nationality, DOB, ID#)
row 1 = name: Steven Martin, DOB: 27-may-1993, Nationality: Trinidad & Tobago, ID #: 1234567
row 2 = name: Gary Richards, DOB: 2-FEB-1993, Nationality: British, ID #: 456789
row 3 = name: David Cohen, DOB: 27-May 1993, Nationality: American, ID #: 98765
row 4 = name: Roberto McDonalds, DOB 21-Jul-1962, Nationality: British, ID # 654321
row 5= name: Gary Richards, DOB: 01-Dec-1978, Nationality: Australian, ID # 1234567
Now if the user enters only name as "Gary Richards" and search then row 2 and 5 should be displayed in a temp worksheet. if user enters name Roberto McDonald and ID# 1234567 then it should not display anything. if user enters DOB 27-may-1993 and nationality British and ID # 1234567 then as well shouldn't display anything and should a msgbox "no data found".
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file:
Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
I have created a spreadsheet that will show me where people are working on what day, etc. however i want to be able to filter by week to create a list of say 2 particuar shifts - in this case "syl ld" and syl n so that the spreadheet would show the people who are working these shifts and I could print out. I have tried Multiple Filters and Advanced search but cannot achieve what I require
View 3 Replies View Related
