Using Vlookup On Trim Function
May 1, 2014
I'm taking 3 very different reports and consolidating them into one manageable readable form. Only problem is that no 1 report has the same info. I've created a key to form pick up the same information that is read differently. As my spreadsheet grows so do the formula issues. I've had one report that has been the biggest pain to break apart. It takes several things and consolidates them, ex: big 2014 girl - dog 20145
I'm using a trim formula to read the last 5 digits that is the only consistent part of the string. =right(J3,5) to trim what i need to read (20145). this formula works. I'm than trying to preform a Vlookup based on what is returned from the trim. The trim number is located in a separate tab as the "key" 20145 = golden Labradors. formula for vlookup that works by itself, but throws up a blank cell when i point it to the trim cell.
=iferror(vlookup($A2,Info!A:ZZ,2,False)" ")
$A2 = the info 20145 from the trim
Info! = is the tab with my 20145 = golden Labradors
A:ZZ = the range in which i need it to find 20145
2 = the second column where it should find 20145 = golden Labradors
False = exact match.
Why my formulas work separately but not when used together? The Vlookup will work if I type in the number 20145. I don't want to type 20145 anymore. I want to use the trim and have the vlookup notice the number pulled from the trim.
View 2 Replies
ADVERTISEMENT
Jan 30, 2008
I'm trying to clean up a very large spreadsheet that contains a tremendous amount of empty space.
I tried using the TRIM function to delete some of the additional space within each cell, but it only seems to allow you to update one cell/column at a time.
Is there a way to clean up the entire spreadsheet at once?
Find/Replace all spaces won't work because some cells have multiple words, and they need the space in between.
View 9 Replies
View Related
Feb 16, 2009
This Trim funcion is not working for me for some reason. I have attached a sample file. Can someone help me with this? You can test the macro to see. I just want to delete the trailing blank characters on Column A. Here is the code.
View 14 Replies
View Related
Feb 5, 2009
Due to the fact that some of the raw data I get dumped out of my database has leading and trailing spaces it is necessary to trim them. The one part of my code which seems to take forever to run is the section which performs this function on around 22,000 cells in one column. Here is the code I'm using. Is there a better way to do this?
'Set ServiceType = wsTmp.Range("C2:C" & tmpRows)
'
'For Each cell In ServiceType
'cell.Value = Trim(cell.Value)
'Next cell
The thing, with much code, seems to be that the slowness of my computer in executing code is directly proportional to the amount of uptime on the machine. Often a cold start will remedy the issue. Rather than having to do this daily to remedy the situation is there some other remedy to the problem?
View 9 Replies
View Related
Aug 21, 2006
"clean" function is not recognized.
Sub ConvertToTrim()
For Each rng In Selection
rng.Value = Clean(Trim(rng.Value))
Next rng
End Sub
View 2 Replies
View Related
Apr 26, 2007
what is the function of the (1) within the below trim function.
The value of A2 is "ABC - 123 - Lovely"
Range("A1").Value = Trim( Split(Range("A2").Value, "-")(1))
View 9 Replies
View Related
Sep 25, 2008
I have some cells containing imported text with a lot of leading spaces. I try to get rid of them by TRIM'ing those cells, but it doesn't work.
Is TRIM only for trailing spaces?
View 7 Replies
View Related
Jun 23, 2014
I am trying to use the trim function to remove unwanted spaces at the beginning of cells that contain an address. The entire column contains spaces prior to the street number/name.
View 14 Replies
View Related
Jun 11, 2014
I have created worksheets search box and want to use Trim Function to avoid spacing error when user enter the sheets name they are looking for and also sheets name in the Activeworkbook.worksheets.name
However the trim Function seems does not work
[Code] .....
View 8 Replies
View Related
Jan 13, 2014
My requirement is to remove the spaces in the text in each cell in a worksheet. i have used TRIM function for this. Sheet1 will have the imported data and sheet 2 has the formula to TRIM. i have an issue when using TRIM on date format. I have used formula TRIM(sheet1!Ax) for columns 1,2 and 3 and TRIM(TEXT(pcload!D1,"mm/dd/yyyy")) for column 4. But the blanks cells in sheet 1 have a value of 01/00/1900 in sheet2. I need the blank cells to be displayed as blank in sheet2.
Sheet 1:
82909U
AB
121
[Code]....
View 2 Replies
View Related
Apr 25, 2007
I have come up with this to Trim all of the data from rows 2:30 removing any trailing spaces after the last word in each cell. The macro takes a couple of minutes to run have I got something wrong that is making it run slowly or does the Trim process just take longer?
Sub TRIM_RANGE()
Dim myRange As Range
Dim myRow As Range
Sheets("CAMPAIGNS_2007").Select
Set myRange = Range("2:30")
If myRange Is Nothing Then Exit Sub
Application. ScreenUpdating = False
myRange.Replace What:=Chr(160), Replacement:=Chr(32), _
LookAt:=xlPart, SearchOrder:=xlByRows, MatchCase:=False
For Each myRow In myRange.Columns
If Application. CountA(myRow) > 0 Then
myRow.TextToColumns Destination:=myRow(1), _
DataType:=xlFixedWidth, FieldInfo:=Array(0, 1)
End If
Next myRow
Application.ScreenUpdating = True
End Sub
View 8 Replies
View Related
Jan 31, 2014
I'm coping and pasting data (html) into a worksheet. When I try to format some of the columns as accounting$, number, ect. They won't format. It looks as if there are spaces before and after the data. So I tried the trim and clean function but it doesn't work, so I guess the blank "spaces" are not really spaces.
It gets better...
When I do the same exact copy and paste (as html) on another persons computer, they are able to format just fine, and the "spaces" are removed automatically.
Why is this working on one computer but not the other? Is it a setting that my computer has enabled or disabled? If so, what is it?
View 1 Replies
View Related
Dec 3, 2013
let me start by saying that I know an example workbook would be useful here, but the part I'm struggling with is the [managementroster.xlsm] file, and there is A. no way I can release it to the internets and B. its so huge/complicated I couldn't even begin to reproduce a portion of it, scrubbed of data, and hope to maintain its functionality in a meaningful manner.
[Code]....
This formula checks a staff number on this spreadsheet, and then goes and looks at the staff number on the roster. Once found, it returns that staff members roster, but changes any manager codes in the MRC list to Mgr, and changes all other roster codes to Free.
I now need this formula, before altering roster codes to Mgr or Free, to only return codes that are a match for another table (or after really. I don't particularly care, so long as only codes are shown that match data from another table). I think an index/match function would do the trick, but this forumula is already at the edge of my excel ability, nesting another function within it is completey beyond me. The relevant cells for the index/match function would be:
This first Match function targets the column. $E3 is the date required, $BA$1:$DN$1 is the range the dates are entered in
Match: Lookup value = $E3
Lookup array = '[ManagementRoster.xlsm]Vacancies!'$BA$1:$DN$1
match type = 0
This second Match function targets the row. $A$4 is the department name, $B$434:$B$452 is the range where all departments are entered
Match: Lookup value = $A$4
Lookup Array = '[ManagementRoster.xlsm]Vacancies!'$B$434:$B$452
match type = 0
Index: array = $BA$434:$DN$452
So I think my final function is
[Code] .....
But I have absolutely NO idea where it would fit within my first formula, or how to code it so that my original formula only reproduces results that are found in both sheets, or anything.
View 2 Replies
View Related
Oct 26, 2008
I am trying to use the vlookup function together with an offset function but i am not getting it to work properly.
The situation is as follows:
I have a column E in which i use the vlookup function to find its corresponding value in B which in turn refers to a named range. However, the figure i want the function to return is 2 columns to the right and 2 rows above the value which the vlookup funtion finds in the first column.
I have though of using the offset function, but i cannot figure out how to make this work.
View 8 Replies
View Related
Sep 9, 2009
Using the Mid function in Vlookup. I want to get the mid of the value which i get using vlookup.
Example: if my Vlookup gives the value as "GSC 03-Parts & Service Systems-GSMS-Test " i want to use the mid function to get the a new value as 03.
I'm using the below code :
[Code] ....
Attached File : VlookMid.xls
View 5 Replies
View Related
Sep 9, 2009
using the Mid function in Vlookup. I want to get the mid of the value which i get using vlookup. Example: if my Vlookup gives the value as "GSC 03-Parts & Service Systems-GSMS-Test " i want to use the mid function to get the a new value as 03. I'm using the below
View 3 Replies
View Related
Oct 23, 2009
vlookup function. find whats wrong with my code
View 3 Replies
View Related
Jan 25, 2009
IF(ISNA(VLOOKUP(E24;Sheet1!$A$6:$N$25000;10;FALSE))=0;"NOT FOUND";"FOUND")
This Formula doesnt seem to work, it shows me either every row with found or not found..
If there is a match to E24 in other sheet and has a value in column 10 it should say found otherwise not found.
View 11 Replies
View Related
Jul 18, 2012
How do I use excel to refer one cell as a constant value while the second cell varries as the cell value changes along multiple sheets.
View 7 Replies
View Related
May 8, 2014
I am having issues using the INDIRECT function to lookup data from a sheet with the same name as that appearing in a given cell. For example, in cell D27 i have the text "S1_358_810" (Not including quotations). I also have a sheet named "S1_358_810". My formula is as follows;
Formula:
[Code] .....
However this is returning #N/A. There is a list of numbers in sheet S1_358_810 in column N and from that I want the value in column Q (thus 17).
View 11 Replies
View Related
Dec 17, 2008
I have a vlookup function that is looking up a range of cells. I would like it to look in the range and then sum up all of the values that meet the criteria. At the moment it will only bring back the value of the first match it finds in the range, I would like it to bring back the sum of all the values it finds in the range, is this possible? Example:
Vlookup(Jan-08,$a3:$c$7,column 4 values, 0), if Jan-08 is listed in the range more than once, I would like it to add up all the values in column 4 that match.
View 4 Replies
View Related
Dec 7, 2009
Function sequence giving me "N/A": =VLOOKUP(LEFT(C6,5),H:I,2,FALSE)
Basically, I have numbers that each start with a unique sequence. The first 5 numbers of that sequence represent a certain cell carrier.
What I want to do is have the function look up the first 5 characters of a cell and depending on the 5 characters, I want it to return a certain value.
My idea with the vlookup was to have the lookup value be the first 5 digits and then in my table, it would take only those 5 digits and return a value I have specified in the second column.
View 10 Replies
View Related
Jan 27, 2010
I tried with the VLookup, and HLookup and neither one worked for me. I have a reference table with all the data, and then input sheet where I want to bring this data by using one of the excel function. ie. When I enter office name on the top of the input page, I would like the Tax ID # in cell C3 to fill in using the excel function from the data on the reference tab. Same with cell C14 & C15. see attached for an example.
View 5 Replies
View Related
Aug 14, 2014
See attached file for my sample workbook.
What I would want to happen is that I want to be able to use Vlook up by using the Value of the Textbox1 in the Info form and place the vlookup result in the fnameresult box.
Data are in Nickname sheet A:B
test template.xlsm
View 4 Replies
View Related
Dec 18, 2008
I am trying to use the Vlookup function in a macro but I can't figure out how to write it. I am using a controlled loop to cycle through my data. So for the first entry, my lookup data is in cell A2. The lookup table is located in a sheet called 'Trade Table' and the lookup field is in Column B and value needed is in column C. The results go in column G. The excel formula is as follows:
View 2 Replies
View Related
Aug 14, 2006
I have to extract multiple words from the string using VLookup function.
(Example :"Cell A1 "This is the best example")
Example : Finding "This" from cell A1- result VLookup (Sheet1) A1:D12
Finding "IS" from cell A1- result VLookup (Sheet2) A1:D20
Finding "BEST" from cell A1- result "Excellect"
Need to haev function for this
View 12 Replies
View Related
Mar 28, 2007
Trying to do Vlookup with If but dont know how , I can do the concatenate function and then Vlookup as in Sheet 3 but that is too much of load to deliver in quick time specially i have pull data in dynamic and continuous update.
View 14 Replies
View Related
Apr 28, 2009
I have a template with multiple sets of the same categories. I want to consolidate the data for each category in a summary. However - the template is expandable by using a macro - so the number of SETS of categories is not fixed. So a simple SUM function won't work since the list of cells expands. I don't want to re-write the formula each time and the method I have is "brute force" with lots of extra columns.
My thought - If I do a VLOOKUP for "Design" and the data is the "unit cost" column can a formula be written to see all the occurences of "Design" and SUM the "unit cost" returns?? example book is attached. hit the "add option" button to see the way the sheet expands.
View 4 Replies
View Related
Jan 4, 2012
What I need is for in the order start date column, I need a formula to pick out the first year where the value is inserted into the column and then insert the year into the order start date column. I would do this manually, but with thousands of rows a formula would prove to be most beneficial.
2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 Order start date
515 151 2013 200 2015 1515 2018 5454 2012
View 8 Replies
View Related
Jul 26, 2007
I am dumping data out of SAP, including the following fields:
* Vendor
* Material
* PO #
* Qty
* Amt
* Date
I would like to concatenate the material and vendor and pull in the PO # for the most recent date.
The VLOOKUP part is easy on the material/vendor, but I haven't had any luck in integrating a MAX, LARGE or RANK function to pull in the PO corresponding to the most recent date.
Once the PO # associated with the most current date can be identified for the material/vendor combination, I will need to utilize another vlookup to match the PO # up against a separate data file to pull in pricing. If anyone can think of a way to accomplish this in one step as opposed to multiple formulas.
View 11 Replies
View Related
