I need VBA code to check if two spreadsheets are open at the same time. One is named OMD.xls and the other Report.xls
If they are not, then I need the current sub-routine to stop and exit, followed by a message box that informs the user to open the two spreadsheets at the same time.
I have two separate spreadsheets with lists of email addresses. Each spreadsheet has email addresses in column A, followed by different properties in subsequent columns to Column D. I'm looking for a way in excel to search one spreadsheet to see if the same email is present in both spreadsheets. Then, if it finds a match, I'm hoping to transfer the cell contents from one of the properties to the other spreadsheet.
In excel terms its something like this.
If an email address in Spreadsheet#1 cell A2 is found in the range A1:A10000 of Spreadsheet#2, then grab the information relevant to that email address from column B in Spreadsheet #2, and add it to E2 in Spreadsheet #1.
I've had a new machine, and for some reason if i try and open excel files by double-clicking on a .xls file, excel tries to open each part of the filename individually!!!!
For eg, if i have a file called week 1 report.xls, and i double click that, it gives me 3 messages saying:
cant find c:filepathweek.xls
cant find 1.xls
cant find report.xls
I can get round it by going into excel first, and opening the files from there but it's a right head-doer!!!
I'm on windows XP, and using excel 2003 to open the files...
I have about 10 open spreadsheets (the name of these changes each time but has a certain format). What I need to do is write some code to cycle through all the open spreadsheets and copy and paste the data into a single master spreadsheet. All these spreadsheets have a single worksheet.
View 9 Replies View RelatedI have two workbooks. One is a no-nonsense form interface that my bosses will use to enter safety information. I'll call this workbook "Form". This file is stored locally on each of their computers. The other workbook is stored on a common drive. I'll call it "Master".
When my bosses fill out the Form and click "Submit", the Master file is opened, and certain cells are populated based on information entered in the Form. This is the code I am using to make this happen:
I did a macro on my mac to transfer a sheet from one workbook to another worbook. It works very well when the destination workbook is open. Therefore I wanted to add some piece of code to check if the destination workbook is open. If not then I wanted the macro to open it before tranfering the sheet. Here is the code I´m using for tranfering the sheet
Sub Transfer_Sluttet()
If ActiveSheet.Index <> Sheets.Count Then
Application.DisplayAlerts = False
Set ws = ActiveSheet
Sheets(ws.Index + 1).Delete
ws.Move Before:=Workbooks("Sluttet.xls").Sheets("sheet2")
'Moves active sheet to beginning of named workbook.
'Replace Test.xls with the full name of the target workbook you want.
Application.DisplayAlerts = True
End If
End Sub
This is the type of macro I useually use on my pc to check if a workbook is open and if not then open it
If IsWorkbookOpened("Filename.xls", "C:Documents and ..................
I would like to write a Sub that will see if a workbook is open and if it is not then open it. I know how to have a macro automatically open a workbook, but I run into problems when the macro runs and tries to open an already opened workbook.
View 5 Replies View RelatedI have a sheet from which I load data. A normal cell looks like this:
Code:
='...dataOutput[1.csv]1'!E2
I wrote a script however that writes new data into a new sheet every day, and saves it with the name of the date. The obstacle is, that I won't have a sheet for each day (ex: weekends, holidays). For that reason, is it possible for excel to scan a certain folder, and open the 20th file when sorted by date to read from?
Need some VB Code to check if a workbook is open or not. Either way, it needs to be opened and made active.
I have tried using some of the answers already on here but not getting anywhere.
I want to create something like this: macro checking if file aaa.csv isn't open, if it is macro should stop and show message box "Close aaa.csv", and if file isn't open it should continue to work.
The file aaa.csv is stored in the same folder as workbook with my macro.
I have a code that close a csv workbook after use. But sometimes the book is not opened from the start of, and then I get an error trying to close it.
How can I easily determine if the workbook wbOBX is open or not?
Code:
If Not wbOBX Is Nothing Then
wbOBX.Close False
End If
know a simple code that I can use in Excel VBA to simply check if Microsoft Word is open or not? I'm not worried about checking for a specific document, but just if the application is running or not.
View 3 Replies View RelatedIs it possible for excel to check that a particular window is open and if it is then carry on with a macro
View 9 Replies View RelatedDoes anyone know a way to check (Using VBA) if another excel application is already open?
View 9 Replies View RelatedI have to files and a macro which copies data from one file to the other. The code goes as follows:
Sub test()
Range("A2").Activate
ActiveCell.Copy
ChDir "D:"
Workbooks.Open Filename:="D: est2.xls"
Range("B1").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
Everything is ok as long as the second file (test2) - the one data is copied to, is closed the moment the macro starts acting. The problem is: when test2.xls was opened before the macro was activated a window pops up saying that all unsaved data in test2.xls would be lost.
The best thing to do is to write a piece of code stating that : if the target file is closed then the macro should open it and do its stuff, but if the target file is already opened than the macro should simply switch to the already opened workbook without trying to reopen it. All I need is a piece of code regulating that
Y have files that are stored as .xla files because they are standalone applications that just contain the code.
Y need to test if one .xla file is open and if so close it, so i'am able to open another one. Otherwise the APP withevents from both APP get all mixed up.
I'am actually doing it from vb.net 2005 and i 'am using latebinding.
But the code would be similar y guess.
I have a small group of excel files that I've tried to code to update a master file. I have borrowed code snippets and adapted the rest (still trying to learn). My appologies to those I borrowed from! I would give you full credit if I could remember who did what. Anyway, The files are on a network share folder and everything works perfectly for me, but when one of the people who this was disigned for tries to update it always says "File already open, please try again later." This message is built in to the code.
All the files are in the same shared folder (to make it easier for me) along with the master file.
Here is the code:
Private Sub CommandButton1_Click()
Const strMaster As String = "PMT_Master.xls"
Dim wbMaster As Workbook
Dim srcrng As Range
Dim destrng As Range
How do you check to see if this is the only workbook open. Basically, I want something like:
If only workbook open
application.quit
else
activeworkbook.close
how to check if a workbook is open or not, and then do something on the resualt. What I would like to know is, how can I make the program check if the file is open on another on the server where others can access it? I'm reading this back, not sure im explaining it right... If i have a macro that checks if a file is open, is it checking if its open on just my PC, or is it checking if its open else where?
This is the function Roy did for me: [code].........
I have written a VBA code to make a pivot table from data in another workbook,A, and transfer it to workbook B. I however dont want to restrict this code to workbook A only. This is because usually workbook A will have varying names everytime it is sent. I want to be able to get data from any other workbook that is open at the same time as work book B. What code can I use to select/activate another unspecified open workbook and get data from there?
View 3 Replies View RelatedI have some code setup to create hyperlinks to all the excel files relevant to the current project a user is working on - it details when each file was last modified so it's possible to see how the project is progressing - and whether or not they need to review any changes.
I could do with including a flag detailing if someone else currently has the file open (prior to them attempting to open the file - as they're more than likely to open as read only and end up saving under a new filename - which I don't want happening) - as many of the projects are shared (one user might be in Edinburgh, the other in London for Example). It would be handy to display the user's excel User Name (as I've persuaded everyone to update this). I've added messageboxes identifying Last modified by user x , dd/mm/yyyy hr:min to auto_open's in the past, but am experiencing brain-freeze today
Private Sub Workbook_Open()
Dim vFileName As String
Dim sLastSaveTime As String
Dim sLastAuthor As String
vFileName = ThisWorkbook.Name
Application.Volatile
sLastSaveTime = _
ThisWorkbook.BuiltinDocumentProperties("Last Save Time")
Application.Volatile
sLastAuthor = _
ThisWorkbook.BuiltinDocumentProperties("Last Author")................
I have a spreadsheet with (to keep it simple) with three fields: Name, Date, Complete.
When the spreadsheet opens I'd like a macro to run to check each row of data, and if the Date is before or on today's date and the Complete field is empty, a message box should appear to alert the user with the Name and row number.
I have a form in Access with a button that opens an Excel file. I think I've seen vba code to tell if a specific Excel file is open already. What I'm looking for is a way to tell if an Excel file is already open when you don't know the filename of the Excel file. Is that possible? Or at the very least is there a way to be able to tell if Excel is already open?
View 4 Replies View RelatedI am looking to check if its open, if it is, then copy the row, if not, then close it.
I am still new to vb, so learning as I go, but looked at many other posts, and there are so many ways i have seen to open one, I'm not sure which is the best, and none that I have seen show me if they check if its open.
Code to check if a workbook is open, and close it, if it is.
View 4 Replies View RelatedMy company used Excel with VBA as a sales tool. We recently updated to new application all together. The sales force, being familiar with Excel and most of them finding it much easier is still giving old pricing quotes based on some of the built in product forms and calculating tools from the Excel files. I want them to still be able to view the excel files they made in order to see old customer data and projects they built but I needed to disable all the features so they can’t save as just build another quote using the tool
I've locked down a copy of the tool how I want it locked down but now I need to figure out a way that anytime excel is opened by anyone in the domain; I need to check if certain criteria exists on that workbook (Sheet1. Name = “xxx” And Sheet21.Name = “zzz”) etc. f it meets the criteria I need to import my revised modules (module1 and module3) and form (frmsplash) over the existing copies of the modules and form. If not I need to allow the intended workbook to open as intended.
They employees initially got the document by downloading it under the same name, but have since saved the document as many other names.
I am trying to set up a macro that hides certain columns of data in an automated spreadsheet that I don't need. How do I make the macro that hides the columns apply to all spreadsheets that are open except for the one I am in?
View 9 Replies View RelatedI have an application that requires users to download a file from a location that is then imported at their execution into the application. I've done my best to counsel users to download the file to their desktop (for ease of locating) and to stick with a standard filename so that there are no errors. Some of these people just don't take direction well, will save the file wherever, or save the name inappropratly, or worse, open up multiple copies of the same file corrupting the name: ie: FileName.xls, FileName.xls(1), FileName1.
View 5 Replies View RelatedI am just wondering if there is a way of checking if the workbook that is currently open is the only one that is open, as I have been asked to make my code exit the application if this is the case rather that just close that one file.
View 6 Replies View RelatedI am using the below code to login to a website from Excel when I close a userform.
What I now need is a way to check if the website is already open to prevent the code from running and I also would like to navigate to another page on the website once its logged in. The web address of the other page is:
[URL]
Sub LogInToRoyalMail()
Const cURL = "http://www.XXXXX.co.uk/" 'Enter the web address here
Const cUsername = "XXXXXX" 'Enter your user name here
Const cPassword = "XXXXXX" 'Enter your Password here
[Code].....