Two Different Values Using IF Statement
Oct 27, 2008
I'm working on a sheet that will help us with lots of data. This spreadsheet has 2 work sheets in it, one is being used as a form, the other data.
I'm having trouble with a formula on a "Form" worksheet that tells me - if a cell on the "Data" worksheet is blank, then leave it blank. If it contains the word "ON", then put an "X" in the cell.
Here's what I am using to try and get this working, not having any luck.
Any ideas?
=IF(OR('Data'!H2="",'Data'!H2=ON),””, X)
View 11 Replies
ADVERTISEMENT
Aug 25, 2013
I want to use an IF statement that returns 3 values. I can do it to return 2.
Example: I am measuring performance of individuals. If they deliver below 50% I can return the value "Needs Improvement". If they deliver Over 60%, I need to show "Excellent" and finally if they deliver between 50% & 60% I need to return the value "Good".
I am not sure how to show 3 values.
View 3 Replies
View Related
Jan 25, 2010
I want to set up an if statement that does the following, where 'a' and 'b' are numerical values.
If 'a' is not a multiple of 'b' Then
...
Else
...
End If
How can I write this so VBA can understand it?
View 2 Replies
View Related
May 24, 2006
I would like to be able to search a group of cells for particular text,
placing the true of false value in another cell, using this formula;
=IF(ISNUMBER(SEARCH("ACP",A2)),"ACP","XXX")
My reason for this is that I have a large amount of data that I need to
break down. I have a column that is listed similar to below;
OR/ACP
OM/ACT
OR/MTS
O/O
The part before the / is 'system code'
The part after the / is 'module code'
I want to be able to have one additional column for system code and one
additional column for module code, without having to manually go through all
the data and make any amendments to it.
So as a result, (without the correct syntax) with 'S' being the system
Column and 'M' being the module column, what I would like to achieve is;
If cell contains "O/" then S1 = Office but if cell contains "OR/" then S1 =
Office Range but if cell contains "OM/" then S1 = Office Medium
I hope that makes sense.
Obviously repeated for the module column;
If cell contains "/ACP" then M1 = ACP but if cell contains "/ACT" then M1 =
ACT but if cell contains "/O" then M1 = O
View 9 Replies
View Related
Jun 25, 2014
How would I write a IF statement comparing 3 values. For example the field that it would be referencing would have values cell E51(1,2,3,4,5,6,7,...99). The pull back would be:
1-10 = $250,000
11-15 = $550,000
16+ = $750,000
View 2 Replies
View Related
Nov 1, 2009
I need to change the following statement to look for inexact values; i.e. the string of text (ABC) can be found in any position of that cell.
Example 12345ABC = True, 123ABC456 = True, etc.
If (ActiveCell.Value = "ABC") Then
View 9 Replies
View Related
May 10, 2006
I have a list of 100 values in Column A of the attached spreadsheet Sample.xls. I need to count the number of values between a certain percentage including both positive and negative values. Example: I need to count all values that are between 0 and +5% and 0 to -5%.
View 2 Replies
View Related
Dec 4, 2008
IF B1 has a possible value ranging from 1 - 5, and IF the value in E1 is equal or great than 2,5,10,10,15 BUT 2,5,10,10,15 need to match to specific ranges set in B1 1=2, 2=5, ,3=10 ,4=10 ,5=15 THEN IF TRUE "WITHIN" IF FALSE "NEEDS UPDATE"
Got help earlier with this formula: =IF(AND(B1=1,E1<=5),"WITHIN","NEEDS UPDATE") :D Worked Great! This was my attempt at expand that formula:
View 3 Replies
View Related
Mar 28, 2009
If I have any value in cell A1 then the cell should show 1 if true or nothing if false. I have managed this via
View 3 Replies
View Related
May 29, 2009
I am using Excel 2007.
In cells A1 and B1 I have numerical values, e.g. 50 and 12 respectively. Cell C1 calculates the product A1*B1 (= 600). In another cell, say D1, I want to display a statement like “50 x 12 = 600” with the 50, 12, and 600 taken directly from cells A1, B1 and C1, without re-entering them. If I change the 50 to another value, say 70, then I want D1 to read “70 x 12 = 840”
View 2 Replies
View Related
Feb 2, 2009
All i am trying to do is create a function that will provide me with the minimum invoice value between cells H17:H150 which excludes negative values i.e. refunds ...
View 6 Replies
View Related
May 7, 2012
I have 3 sets of textboxes. The user inputs information and all the nformation for each are consolidated to one textbox(delaycomments.value)
2 of them are controlled by a calendar input. THe user chooses a date and the date is shown in a textbox. Then they enter notes in the the each comment (delay1, delay2, delay3)
The current code below works, however the spaces I used in between still show even if the values are empty.
So, the "-" that is used to separate the dates still shows even if there aren't any dates. And the ": " still shows as well.
If there is only information in delay1, this is what shows in the consolidated box(delaycomments.value)
5/7/2012-5/7/2012: test. -: -:
Is there a way to convert these to an if then statement to make sure the text only appears if there are values in the cells?
Code:
Private Sub Delay1Comment_Change()
Me.DelayComments.Value = (Me.Reason1Start.Value & "-" & Reason1End.Value & ": " & Me.Delay1Comment.Value & " " & Me.Reason2Start.Value & "-" & Reason2End.Value & ": " & Me.Delay2Comment & " " & Me.Reason3Start.Value & "-" & Reason3End.Value & ": " & Me.Delay3Comment & " " & Me.Reason4Start.Value & "-" & Reason4End.Value & ": " & End Sub
View 2 Replies
View Related
Oct 2, 2008
I have the following formula with multiple if statements:
IF(N2>0,N2,IF(O2>0,O2,IF(P2>0,P2,IF(Q2>0,Q2,IF(R2>0,R2,IF(S2>0,S2,IF(T2>0,T2)))))))
This formula refers to cells in columns N,O,P,Q,R,S and T. Every cell in columns N,O,P,Q,R,S and T also contains formulas (VLOOKUPs).
My if statement works fine but when it checks cells in column P, for some reason, it doesn’t recognize cells with non-zero values. I can’t figure out why this is happening and how to fix this problem.
View 9 Replies
View Related
Jul 24, 2009
I need to see if it is possible to set up an IF statement that can pull information from cells based on the results already available in those cells.
ABCDEFGHIJKLM1Non FeaturedGoodGoodIdentical IMEIsGoodNeeds RLM NumGoodGoodGoodChk DOA BoxGood32Non FeaturedNo ExchangeGoodGoodGoodNeeds RLM NumGoodGoodGoodChk DOA BoxGood23
What I need is a formula in cell M1 that will check each cell B1 thru K1 for the data "Good". If it does not equal "Good", then I need the checks true/false value(s) to show the reason shown in the other cells.
In other words, for row 1, i need a formula where the outcome would be "Identical IMEIs" because D1 is the first box in the set that does not equal "Good". Then if D1 was corrected to "Good", the outcome would then be "Needs RLM Num".
I tried to do it in sections such as {=IF(B7"Good",B7, then the next check )} but the number of statements exceeds the number of IF statements that can be nested. And I really need the formula to fit in one cell.
View 9 Replies
View Related
May 19, 2006
I'm trying to write code so that it uses an offset value depending on criteria. In the attached book I have three coloumns, firstly the date, secondly some letters, an If statement in the third coloumn and another IF statements in the fourth coloumn. I would like a macro that calculates the number of DAYS ONLY, depending on the fourth coloumn. The way it should operate is it should is detect a 1 in the D coloumn and then calculate the difference in days from the adjacent date in coloumn A and subtract from the first time it appears in coloumn A.
For instance in the worksheet, the first 1 in coloumn D is in 'D5'. The date in 'A5' is 04/01/2005. The first time a '1' appears in coloumn C is C2 and its date in 'A2' is 01/01/2005, so 04/01/2005-01/01/2005 is 3 days. Now heres the twist, the next 1 in the D coloumn is in 'D8' and hence the date in A8 is 07/01/2005, now this time the '1' in coloumn C is in 'C7' and hence the new calculation is 07/01/2005-06/01/2005. So hence the 1 in coloumn C is always changing (ie new offset value).
View 2 Replies
View Related
Jan 26, 2008
I want to reference 2 cells to open a msgbox. Currently I use this formula in a cell "=IF(E4="C",IF(A4>30,"OT","")) I am trying to write a macro that will open a msgbox instead. This is what I've tried so far
Private Sub Worksheet_Change(ByVal Target As Range)
If Target(1, 1).Address = "$E$4" Then
If Target(1, 2).Address = "$A$4" Then
If Target(1, 1) = "C" Then
If Target(1, 2) > "30" Then MsgBox("1")
End If
If Target(1, 1).Address = "$E$4" Then
If Target(1, 2).Address = "$A$4" Then
Target(1, 1) = "F" Then
Target(1,2) > "38" Then MsgBox("2")
End If
View 3 Replies
View Related
Feb 7, 2008
I have two spreadsheets, i suppose one part of the solution may be to copy spreadsheet 2 into a new worksheet in spreadsheet 1, but this is my current situation:
Spreadsheet 1 has "Employee lastname" in column F, "Employee Firstname" in column G. Column A in this sheet needs updating with the data populated in column H for that employee in spreadsheet 2 - the lastname is contained in column B, firstname in column C - so i need to to a match.
View 12 Replies
View Related
Sep 26, 2013
I need to make an IF statement that when it's true it need to retrieve the values from a different column. With what function is it possible to just retrieves values?
I need to return the value from pivot table. Forgot to mention this.
View 4 Replies
View Related
Dec 11, 2013
I am attempting to add conditional formatting (yellow fill) to cells that are greater than 15% or less than -15%. I've tried the following formula but, it highlights all cells.
=or(b2:b5>15%,b2:b5
View 1 Replies
View Related
Jun 12, 2014
I am trying to compare to values that a user inputs in a user form. It's ok if they are not the same I just want the user to know it. I am only including the part where the if statement is failing:
VB:
If Me.VSLongQuant.Value <> Me.VSShortQuant.Value Then
MsgBox VerUnBal
If VerUnBal = vbNo Then
Exit Sub
End If
End If
I have VerUnBal as Long and defined as:
VB:
VerUnBal = MsgBox("The Long and Short option Qunatities are not equal." & Chr(13) & _
"Is this intended to be an unbalanced vertical spread?", vbYesNo, _
"Unbalanced Spread Alert")
I can provide more info as necessary. There are two problems 1) the message box is appearing whether the numbers are equal or not, and 2) clicking No in the message box does not cause the Sub to exit.
View 6 Replies
View Related
Nov 6, 2009
I have an IF statement that I need to look at different cells and return different values if ture or false, depending on what is selected in cell J2
Cell D2
if J2 = "FMB/FPI" then retrun the value of cell Y7
if J2 = "FPI/FPI" then N/A
if J2 = "FMB/OTHER" then return the value of cell Y7
Cell E2
if J2 = "FMB/FPI" then retrun the value of cell AC7
if J2 = "FPI/FPI" then then retrun the value of cell AC7
if J2 = "FMB/OTHER" then N/A
Cell F2
if J2 = "FMB/FPI" then N/A
if J2 = "FPI/FPI" then N/A
if J2 = "FMB/OTHER" then then retrun the value of cell AC7
View 4 Replies
View Related
May 25, 2009
I have a work sheet which includes a column of numbers representing certain daily events. I am building a user defined function to analyse the trend in the numbers by assisigning values from -2, -1, 0, 1, 2 based on comparison of two days.
Below is the function I built but it is not working, it is resulting in zero values in most conditions. I have attached the sheet which includes the numbers and the function.
View 3 Replies
View Related
Apr 23, 2013
Excel 2010, I have the following list (showing part of it):
Name
T-Shirt Sizes
Nathan
S
[Code]....
The aim of the list is to see what Sizes each and every person needs and then count how many T-Shirts are required for that particular size. The list is over a 100 entries long so counting it manually isn't really an option as it's time consuming as well as errors might arise.
Thus, I've been trying to use the IF statement with the following logic but to as no avail
IF Size in Column is XS
Add 1 to a particular Cell
IF Size in Colum is S
Add 1 to a particular Different Cell
and so on for the other sizes...kind of like a counter for a for-do-loop.
View 2 Replies
View Related
Jul 28, 2009
I am currently using an Intersect statement in a worksheet module to perform two things:
1. Insert a time stamp into row 2 when row 1 has a price inserted
2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user.
If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
View 5 Replies
View Related
Jan 11, 2010
Put in a statement within a Macro that populates cells with the values that I want it to but instead of populating all at the same time, is it possible for the values to be delayed.
I have designed a mock spreadsheet (attached) it has two columns 'Before' and 'After'
After = Before values (in this mock)
When you press the button, the values are populated straight into the 'After column' can we add the delay between the values? So that the values dont come up straight away.
View 3 Replies
View Related
Oct 1, 2008
I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies
View Related
Feb 14, 2012
I am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.
My purpose is trying to look up
Code:
tb_SelJobID.Value
from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if
Code:
TbSelYr.Value
matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.
Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.
Code:
Sub CmdGo3_Click()
Dim Row As Range
Dim FinalRow As Long
Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range
Application.ScreenUpdating = False
[code]....
Windows 7 with Excel 2010
View 9 Replies
View Related
May 5, 2014
I have an Excel Sheet which I use as Database. The database has 11 columns and I insert data with the following function:
Code:
Sub testInsert()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim i As Integer
Dim strTest As String
strTest = "test"
[Code] .......
Now I want to retrieve this data. i.e. I want all F1 where F2 and F3 are 0 AND I want them ordered descending. I'm trying to achieve this with:
Code:
Sub testSelect()
Dim adoCommand As New ADODB.Command
Dim sQuery As String
Dim mrs As New ADODB.Recordset
Dim strTest As String
strTest = "test"
[Code] ....
The result I am getting looks like this:
9
8
7
6
5
4
3
2
15
14
13
12
11
10
1
I assume, that the data is interpreted as String instead of an integer. But I explicitely stated the data as Integer when storing the data into the DB.
View 5 Replies
View Related
Jan 6, 2009
I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
View 9 Replies
View Related
Feb 10, 2009
In column A, I have the following values:
build
chil rat
datcen
mang
nextg
ost rat
omp
sco rat
In column B, I need the formula so it shows values that if column A = "build", "nextg" or "datcen", then the value in column B is "nextg" and if column A = "chil rat", "ost rat", "sco rat", then the value in column B is "mig". For everything else, it should be blank.
View 5 Replies
View Related
