UNMERGE And CENTER ACROSS
Aug 8, 2008
"Get rid of merged cells!"
You can read it often on this Board.
I will not open any debate on the subject, but just want to provide a solution to get rid of them automatically. Anybody who likes can refer to this thread.
WARNING
This code is changing layout.
1. Could take a while when you have sheets with large used range or a lot of merged cells. You can follow the status and can interrupt it if you want.
2. Save before executing. I'm quite sure it works good, but the result might be something else then you had in mind, especially when you are quite new to this.
Option Explicit
Sub Unmerge_CenterAcross()
'Erik Van Geit
'080808
'merged cells will be unmerged
'contents will be centered across merged area
Dim LR As Long 'Last Row
Dim LC As Integer 'Last Column
Dim i As Long
Dim j As Long
View 9 Replies
ADVERTISEMENT
Aug 13, 2008
Following is what I want to do:
Draw a line from the center of the first cell to the center of another cell.
View 3 Replies
View Related
Dec 31, 2009
I have a question/problem on using Unmerge in VBA. I have a spreadsheet that in Column J has some cells/rows that are merged. I need to unmerge these cells. Not all rows have this merge, so I think there would need to be some sort of IF statement or something...but I'm not sure how to go about it.
I can say that if, for example, cell J19 is merged, it would be with K and L. Then maybe, J24 with K24 and L24 are merged. Then maybe J27 with K27 and L27....and so on. For the most part the sheet would have about 200 rows of data. But only would I find about 20 or so of these merged cells. I also have 19 excel files to do this to, or otherwise, I would just do it quick and dirty, manually-style.
As an added task, once the cells are unmerged I'd like to take the value found in cell O19 (same row as where the merge was found) and copy it into L19.
View 5 Replies
View Related
Jul 31, 2009
Can we unmerge a complete address in seperate seperate coloumns? Like Complete address is "1st Floor, 2a Harrison Road, Erdington, West Midlands, B24 9AA" and i want to split it like Address[1] "1st Floor" , Address[2]: "2a Harrison Road", Address[3]: "Erdington"...
Is there is any formula which can split data with the help of seperators (Comma or space) ??
View 3 Replies
View Related
Aug 10, 2009
Seems like a dumb question but is it possible to unmerge say one "3 cell" merged cell with a value of "A" into 3 SINGLE CELLS with a value of "A"?
View 9 Replies
View Related
Jun 14, 2008
I have read the posts regarding merged cells and understand they should be avoided, but I am working with spreadsheets created by others. My problem is that I need to sort the data, but some of the cells are merged so it won't work. Is there a macro command to easily find the merged cells and unmerge them?
View 5 Replies
View Related
Sep 15, 2014
I have a protected sheet to avoid delete of functions. In a specific area, however, i have merged cells of five columns in rows. Because in these lines i have write some text and overcomes the rows, after, what i do is: i unmerge the rows and choose 3 rows from 5 columns together and merge. Thus, the text is in one framework. In fact, every time, i want to merge different regions, but always i want to merged any areas who have marked with the mouse. Then, i delete the text and i need to redo the context of three lines, three separate lines. I hope you understand what i need.MergeAndUnMerge.xlsm
View 1 Replies
View Related
Nov 6, 2008
Is there any quick and easy way to unmerge merged cells and put the merged cell value in all the merged cells. For example, if I have A6:A15 merged together and its value is "FirstMerge" then I would like to unmerge all A6:A15 and then put "FirstMerge" in all the cell A6,A7,A8 etc. etc. upt oA15. I have lot of these merged cells in a sheet and I get this every month and makes any data processing very difficult. A macro or VBA code or any other solution will be fine.
View 4 Replies
View Related
Nov 29, 2011
is there any vba code that I can add to my workbook sheet 'Cognos Input' to make anything I paste onto/into it unmerge on the paste key stroke.
View 1 Replies
View Related
Jan 29, 2008
I have created an excel addin, the purpose of which is to run a piece of code attached below in code section, which iterates to each cell of excel and remove merged cells. I am getting a very basic error as my addin is not able to recognize the workbook which is opened and it returns Nothing for ActiveWorkbook object....
View 9 Replies
View Related
Jan 27, 2010
I have a workbook with multiple worksheets. On some of those worksheets a have merged cells, so in order to paste new data I need to unmerge them first. Below is the code that I wrote for it. However it doesn’t work and returns “Run-time error '1004': Application-defined or object-defined error”. I looked at this post List Maximum Value From Each Worksheet and tried adding With – End With, but it failed too. As far as I understood the problem is that the Worksheets/Sheets object does not support UnMerge property, but I may be wrong. If I add ws.Activate line (test2) everything works fine.
However I was wondering if there is a way to do it WITHOUT activating the worksheets.
Sub test1()
Dim i As Integer, ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
Select Case ws.Name
Case "5 - Top Network Facilities", _
"5b - Top Arb Facilities"
For i = 0 To 9
ws.Range(Cells(2 + i * 5, 1), _
Cells(6 + i * 5, 1)).UnMerge
Next i
Case Else
End Select
Next ws
End Sub
View 4 Replies
View Related
May 16, 2007
In the attached document, there are some cells which have been merged. For instance the cells A4 thru A7 were merged as one field. if you examine B4 which is actually made up of B4 thru B7 the data contained therein is 123. Is there a way to unmerge these merged cells and have the value (in this case 123) appear in each line of the unmerged cells? If you right click and click unmerge, it unmerges okay but does not populate each line with the data which was on the original field.
View 3 Replies
View Related
Jul 9, 2014
I am using Excel 2010 and have the problem as shown in the attached file.
Input Sheet shows the Data I have at present
Output Sheet is the desired result.
I need a macro which should create an "Output" sheet by doing the following on the Input Sheet
1)Insert a Blank Column before Column A
2)Unmerge the Region Heading and insert the respective Region Name in the newly inserted Column. Region Heading will be in Bold Font.
3)Repeat Step 2 for all Regions
4)Delete the Rows which was merged.
Please note that the number of Data Rows will vary for each Region.
I have shown two Regions for explanation purpose only. There will be several Regions in reality.
The result is shown on the Output sheet
Merge Problem - Forum.xlsx‎
View 3 Replies
View Related
Jul 4, 2009
I'm trying to find some code that will format the center header to Arial Bold, size 14.
Currently I have the center header populated with the cell value E9 using -
ActiveSheet.PageSetup.CenterHeader = Range("E9").Value
I've been digging around on the internet, but can't figure out how to format the text automatically.
View 3 Replies
View Related
Aug 25, 2009
I have a macro that output a month based upon a date that has been entered in a row on my spreadsheet. I want the macro to center the text but im not sure of the syntax, the macro code is below:
View 2 Replies
View Related
Jun 26, 2012
I have several reports that some columns of numbers have this
(="2015270228 space in here ")
So the numbers do not a center in the column. I didn't make the report, it comes from a different program and is exported to Excel.
View 4 Replies
View Related
Feb 3, 2008
How can I get the message to display in the center of the display box?
If i < 3 Then If MsgBox(Tries - i & " Tries Remaining." & vbLf & vbLf & " Try Again?", vbYesNo) = vbNo Then Exit For
As you can see the "try again?" & the text "Tries Remaining"works fine by entering spaces, but the number that is suppose to display with "Tries Remaining" does NOT center. How can I get the number to display in the center along with the text?
This is the complete code.
Private Sub Workbook_Open()
Dim i As Integer, Tries As Integer
Dim PassTry As String
Const Pass As String = "Password"
Dim storedPath As String
On Error Resume Next
storedPath = ThisWorkbook.CustomDocumentProperties("PathCertString").Value
On Error GoTo 0..................
View 9 Replies
View Related
Jul 15, 2006
I am developing a form for emergency dispatching. One of the features of this dispatch sheet is that there are several maps in it that open on a seperate form. The map form has 4 maps that are picture files in an image. these images are in a frame. The different images are selected using option buttons. Given the background above, my problem is this. I have code that zooms in 50% each time the Click event for the image is fired. wht i am trying to do is make the zoomed view center where i clicked. this is the code that i have so far but it doesn't work all that spectacular, the closer I zoom in the further out of center the place i clicked gets untill it is out of view.
Private Sub Layout_MouseMove(ByVal Button As Integer, ByVal Shift As Integer, ByVal X As Single, ByVal Y As Single)
CurrentX = X
CurrentY = Y
End Sub
Private Sub PlantLayout_Click()
If Frame1.Zoom < 400 Then Frame1.Zoom = Frame1.Zoom + 50
frmmap.Frame1.ScrollLeft = CurrentX - (Frame1.Width / 2)
frmmap.Frame1.ScrollTop = CurrentY - (Frame1.Height / 2)
frmmap.Repaint
End Sub
View 2 Replies
View Related
Jan 14, 2014
I need a sum of amount based on the Cost center & Category from the details table , can i have a formula to get them .
Please find the example amount in the attached excel sheet highlighted in RED Colour.
View 3 Replies
View Related
Nov 30, 2011
Is there anyway to center the data in a column in a listbox without manually adding the spaces?
View 5 Replies
View Related
Jan 30, 2012
I am trying to use Range.Find in a named range that has some areas where two cells are merged using the format "Center Across Selection"
Set rngTemp = wbMaster.Range("PnLDateRow").Find(what:=dDate)
I get a run time error 438 "Object doesn't support this property or method"
Is it not possible to use this method to find the cell in this range? I tried iterating through the range but that errors also.
View 1 Replies
View Related
Dec 4, 2012
Any shortcut key to center data in the current cell? Or if I write a simple macro (not very good at writing them), what would the vba code to use to center text in whatever cell I am currently in?
View 1 Replies
View Related
Jul 2, 2013
Any way to vertically and horizontally center an autoshape in a cell without VBA. I created a shape and placed it in a cell but don't think it is centered. Also, if I add shapes to adjacent cells, I would want them all to be centered directly in the middle of the cells they are in. Using the align feature only seems to make sure the shapes are aligned to each other but doesn't seem to put them in the center of their respective cells.
View 1 Replies
View Related
Dec 7, 2013
raw data
(format number general & center align)
desired result
(keep format number & keep center align)
0
-
1
1
2
2
0
-
0
-
it's possible without VBA Coding?? assuming mark "-" is not text but instead number "0"...
View 4 Replies
View Related
Aug 14, 2007
I have the following code,
i would like to select columns A:W and center the text
Private Sub Workbook_NewSheet(ByVal Sh As Object)
Sh.Range("A1") = "W/O"
Sh.Range("B1") = "CUSTOMER"
Sh.Range("C1") = "DETAILS"
Sh.Range("D1") = "CUST PART NO"
Sh.Range("E1") = "STATUS"
Sh.Range("F1") = "NOTES"
Sh.Range("G1") = "DEPARTMENT"
Sh.Range("H1") = "DATE"
Sh.Range("I1") = "CUST ORDER NO"
Sh.Range("J1") = "DEL NO"
Sh.Range("K1") = "QTY"
Sh.Range("L1") = "SALE PRICE"
Sh.Range("M1") = "CARRIAGE OUT"
Sh.Range("N1") = "TOTAL SALES"
Sh.Range("O1") = "INT CODE"
Sh.Range("P1") = "SUPPLIER"
Sh.Range("Q1") = "COST PRICE"
Sh.Range("R1") = "CARRIAGE IN"
Sh.Range("S1") = "TOTAL HRS"
Sh.Range("T1") = "LABOUR COST".......................
View 9 Replies
View Related
Mar 14, 2008
Here's a weird one: I can't get some of my cells to align to center/left/right. Both the buttons on the toolbar and Format->Cells->Alignment won't work. The kicker is that other cells on the same sheet will center/left/right just fine. Is there some kind of formatting protection I inadvertently set?
fyi, Excel 2003 on XP Pro, all fully updated.
View 9 Replies
View Related
Jan 25, 2007
I have a worksheet (Covers) that is going to be the front and back covers for a binder.
The title/text portion is automatically filled from cells elsewhere in the workbook.
I have a button to bring up a userform that allows one to select the images (3 .jpg images) you wish to use on the cover pages.
I have code that successfully brings up the userform, and allows image selection and preview within the userform.
Now I want to insert these selected images into the worksheet, centered on specified cells and sized (zoom) to a maximum width/height (whichever is reached first).
Can a blank Picture be inserted with its size specified/fixed, then use code (Image1 = LoadPicture?) to change what is displayed?
Or do I have to calculate the size, center it on the page, and insert the image each time?
The code (in part) for the UserForm looks like:
Private Sub SelFcvrImg_Click()
Dim FCpicName As Variant
ChDir ("S:DanBuilder Logos-Photos")
FCpicName = Application. GetOpenFilename(Title:="Select an Image!", _
fileFilter:="Pictures (*.bmp;*.gif;*.tif;*.jpg),*bmp;*gif;*.tif;*.jpg")
If FCpicName <> False Then InsertImgForm.FCoverImgPrvw.Picture = LoadPicture(FCpicName)
End Sub
The UserForm has an Image (preview) with PictureSizeMode set to zoom.
I'm really after the same thing embedded in the sheet...
View 9 Replies
View Related
Feb 2, 2007
i am tring to make any workbook i open when i writ in it, i want what i wrot to be in centerd
Private Sub Workbook_Open()
'*Center
Dim sh As Worksheet
For Each sh In ActiveWorkbook.Worksheets
With sh. Cells
.HorizontalAlignment = xlCenter
.VerticalAlignment = xlCenter
End With
Next sh
End Sub ............
View 5 Replies
View Related
Sep 25, 2007
I'm having trouble centering my UserForms on the screen. I have tried all the options on the StartUpPosition in the Properties windows and the closest I can get is vertically centered but on the far left. The annoying thing is that it was working (both vertically and horizontally centered) but when I changed the defaults of the option buttons they moved to the position I described. I have two monitors (but excel is maximised on one monitor only) could this have something to do with my problem? If so why did it work before?
View 6 Replies
View Related
Apr 12, 2008
I am having some troubles inserting an image than centering it within the cell.
When I do this:
Set rng = Target.Cells
With pic
.Height = rng.Height
.Width = rng.Width
.Left = rng.Left
.Top = rng.Top
End With
The picture fits within the borders of the cell, but when I do this:
Set rng = Target.Cells
With pic
.Height = rng.Height /2
.Width = rng.Width /2
.Left = rng.Left /2
.Top = rng.Top /2
End With
The picture is the right size but not within the cell.
View 2 Replies
View Related