I have to count a specific column based on two criterias...
Column B Column C
SCD Y
ECD Y
DCD N
SCD N
SCD N
I have tried =COUNT(IF(AND(B3:B51="SCD",C3:C51="Y"),1,0)) But that doesn't seem to give me anything but a "0".
I'm trying to use two variable to calculate a count.
In my attachment I have Name, Balance, and Disabled for the data.
I would like to find out how many names has a negative balance and have a "Yes" for Disabled
In the Summary part, I can find out the count of who is disabled, but can incorporate the negative balance.
I am trying to find a formula that will count the number of unique occurences with two variables (Department and Period).
Since a person can be listed in the department more than once for each period, I need to find the unique number for each department by period. I have attached a simple file as an example. Any formula would go in the yellow area.
I have been given a spreadsheet to calculate. I think the data is very badly laid out but I cant change it. I have attached a sample from it. The original has 1000 people (accross row 1 in multiple sheets) and has approx 200 rows. I only have to calculate sheets individually.
I need to count all occurences in the row for;
Current Level = 1 and Training Requirement = 1 ( Cell B4)
Current Level = 1 and Training Requirement = 2 (Cell C4)
etc for all Currant Level 1-4 and Training Requirement 1-3.
I have been looking over how to use Sumproduct but I don@t see how to use it here.
Here in the code wbResults is a Workbook present in my present folder. In the Sheet1 and Column "I", the result of test cases is entered. The Result of the TEST CASES can be PASS or FAIL. So i am trying to get the total number of PASS test cases and Total FAILED test cases. BUT with the code i have written, i am not able to fetch the right data. Is the method of comparing wrong? or what else? i have tried to debug but nothing comes out.
Do While Not i = 1008
If (wbResults.Worksheets("Sheet1"). Cells(i, 8) = "PASS") Then
PASS = PASS + 1
End If
i = i +1
Loop
My data: four variables A,B,C and D.
A growing dataset representing a group of people being nominated in different weeks for different jobs in different locations. Within a week and over several weeks an individual may be nominated for any number of jobs, in any number of locations.
A=week number (52 possibilities), B=job code (20 possibilities), C=location (2 possibilities), D=name (500+ possibilities) .....
Unzip Code - Works without Variables, Breaks with Variables.... This has been driving me bananas...
I have the
I want a formula to do the following. Count all instances when column A contains S or A and column B = 1. The example below would equal 2 (ONES MEETING CRITERIA ARE IN BOLD).
Example
N 2
S 1
A 1
D 3
X 2
Can a Function give two or more output variables. e.g.
Sub a()
x = 5
result = Y(x)
End Sub
Function Y (x As Integer) As Integer
Dim B
B = ... * x
Y = ... * B
this will give back Y as a result. But if I want to get 2 or more output variables (let's say I need to get also B into sub) from one function, how should I do that?
I need this because function works with large matrix and I want to extract some values appeared in between.
I'm trying to loop through a range in excel from access, checking where the titles (in Excel row 1) match with the fields (in a recordset in Access that is passed to the function) - and where they do, I want to dimension a variable to hold the column number - I'm not sure it's possible, but I'd be interested to know either way. The line I'm asking about is at the bottom of the code - the rest of the code is just to give context...
Sub ImportGeneric(rsImported As ADODB.Recordset, rsConfirmed As ADODB.Recordset)
Dim fd As FileDialog
Dim xl As New Excel.Application
Dim wb As Excel.Workbook
Dim ws As Worksheet
Dim iFilePicked As Integer
Dim strFilePath As String
fd.Filters.clear
fd.Filters.Add "Excel files", "*.xls"
fd.ButtonName = "Select"
iFilePicked = fd.Show
If iFilePicked = -1 Then
strFilePath = fd.SelectedItems(1)
Else ..................
i have a "problem" to empty / reset my variables. I defined them as vHour1_KW2 where the "1" is from 1 to 21 and the "2" starts from 1 to 53. Now I want to erase all of this variables or to set the value of them to "0".
At moment I use following
vHour1_KW1 = 0
vHour1_KW2 = 0
...
vHour1_KW53 = 0
vHour2_KW1 = 0
vHour2_KW2 = 0
...
vHour2_KW53 = 0
until...............................
see my attached sheet cotaining the following questions. in a day report sheet how should i count request matching the crateria of date and other conditions. in a monthly report a heavy conditional sum calculation which make slower sheets how can i make it faster.
View 2 Replies View RelatedI need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.
Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.
Examples of the contents of cells in col D with the "Category:" prefix are as follows:
Category: Adversity
Category: Answers
Category: Assurance
Category: Blessings
Category: Build
Category: Change
Category: Children
Category: Choices
Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.
I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.
I want is a field (e.g Large Parts Used) where I can enter in a number, then basically this number is subtracted from current stock field for Large Parts so I get an updated field of current stock on hand.
But what I want to do is once I've entered the number in the Large Parts used field, I can then clear that field but have the corresponding Current stock field to maintain what was last enetered.
E.g
Large Parts Current Stock = 50
(enter in) Large Parts Used = 2
Large Parts Current Stock = 48
(Clear field where 2 was entered into Large Parts used)
(Field still stays at Large Parts Current Stock = 48 although field where 2 was entered was cleared, so need it to save the information so can continually clear and re-enter amounts and have the stock continue to reduce)
going down are stores a, b, c, d.... what i'm filing in across is the square feet of each store and what quartr or year each store came into place. so there will either be a 0 or a number Now, I want to be able to count the number of nhew stores each quarter. how do i create a formula that just recognizes it the first time there is a number and not a zero... because i will put the square feet in subsequent quarters after it opens so i can see yearly how many square feet the store had. then also, how can create a button on the page that will say quarterly numbers and a button that is annual. so that i can hide the quarterly columns and just see an annual spreadsheet... and for the quarterly button so i can hide the annuals and just see the quarters....
View 6 Replies View RelatedColumn A has current building, column b has future building. Would like to count the number of changes without adding a separate column with an if statement.
View 3 Replies View RelatedI am trying to come up with a formula that will count everything excluding 1 in one row, while looking at another row to determine the group.
The attached example explains things a lot better.
I am going to have 2 formulas. 1 for the "Big" group and one for the "Small" The formula needs to look first at the column that has the group in it. Then it needs to count everything is column A excluding "Snake" And return the value.
I want to count from each cell that doesn't contain "0". So if cell C2=100, I want to be able to count the number g1*2 from that cell and return a value. But then I want to start another count from c5 to the number of g1*2 and then another count from c8 etc basically any cell that contains a value other than "0", I want to start a count from.
The point of this is that the half life will expire after that count, so I want to be able to add the drug levels on an ongoing basis until the count of the half life has been reached. But there will be further dosing along the way before this half life is reached and these values need to be added to the existing value until the half life expires.
I want to count cells in column AA that are graeter than 160, and in column N = "RM" and in column A = "CBP". Can't seem to get this right.
View 4 Replies View RelatedVBA which would count data in Column F of dump Sheet and paste the count in master sheet B2 Cell.
View 7 Replies View RelatedI require a Formula to calculate the INTERVALS (the number of Rows between
the LAST instance and the PREVIOUS instance in a column) between each
individual occurrence of any designated PAIR of Numeric values (single-digit
/ double-digit) in the same Row of the Named Range "Results" and return each
calculated INTERVAL result to a separate Column on the same Row of a New
Sheet - starting with the most recent ( the LAST) occurrence.
For instance, each time 80 and 87 appear together in the same Row, return the
INTERVAL by calculating the number of Rows between the LAST instance and the
PREVIOUS instance in a column - locate when both Numeric values LAST appeared
together and Count back to their PREVIOUS appearance together to get the
required Count; i.e. count from the Row ABOVE LAST appearance to the Row
BEFORE PREVIOUS appearance.
The results are returned to a chart / matrix layout: I have the criterion
vertically and horizontally and they are referenced using the horizontal and
vertical cell address that houses each criterion, and the results are
returned across the Row of the intercept of the vertical and horizontal
criterion. At some point both criterion values being referenced will be the
same, can the Formula return empty text "" when this occurs?
Example Chart / Matrix Layout:
Cell Ref. A2 and B1 criterion 80 and 80
Cell Ref. A3 and B1 criterion 81 and 80
Cell Ref. A4 and B1 criterion 82 and 80
Criteria B1 houses 80
A2 houses 80
A3 houses 81
A4 houses 82
A5 houses 83
ABCDE1DATEEMP1Days Between SalesEMP2Days Between Sales
23/6/2012 YES0NOÂ 33/5/2012NOÂ NOÂ 43/4/2012NOÂ NOÂ 53/3/2012 YES2NOÂ 63/2/2012NOÂ NOÂ 7 3/1/2012 YES1YES682/29/2012 YES0NOÂ 92/28/2012NOÂ NOÂ 102/27/2012 YES1NOÂ 112/26/2012 YES0NOÂ 122/25/2012NOÂ YES4
I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.
I have a transactional data set with a line for each transaction and I am looking to count the number of documents (each contains multiple transactions) against criteria.....
It looks something like this.....
Column A Column B
Document No Category
11000001 A
11000002 B
11000003 B
11000002 A
11000001 A
Is there anyway to do this without subtotalling for each document and then a count?
I have been using the wrong formula to count total entries in columns and only just found this error. The MAX formula in cell B4 is: =MAX($B$12:$B$36). If the all the rows are full within range F12:F36, then the MAX formula is fine to count the total within range B12:B36 (25) so I thought. But sometimes there are omissions between F12:F36. If there are 2 blank cells anywhere within F12:F36 for example, then B4 needs to show 23 respectively. In the sample WkBk B4 needs to show 8
View 2 Replies View RelatedI'm having a hard time understanding how to accomplish what seems to be a simple result.
I need to display one of two words, based on whether or not a pair of values are above or below the criteria.
FIRST:
IF H6 is greater than 5000
AND
IF AB6 is greater than 25000
Display: Double
SECOND:
IF H6 is less than 5000
AND
IF AB6 is greater than 25000
Display: Single
There is no 3rd scenario, even though logically there should be.
I am trying to put variables in this URL which is related to yahoo finance :
.Name="hp?s=NVDA&a=00&b=31&c=2001&d=11&e=29&f=2006&g=m&y=0"
I defined at the beginning
Dim start_date As Date
Dim end_date As Date
Dim datestring As Variant
start_date = #1/31/2001#
end_date = #11/26/2006#
and put them in datestring
I passed the datestring to a new sub which has the URL:
.Name="hp?s=NVDA&a=00&b=31&c=2001&d=11&e=29&f=2006&g=m&y=0"
So, my question is, i tried to put the (1/31/2001) and (26/11/2007) which is in the above URL which is separated in variables and the URL remain the same
I have a file where I want to count number of cells where the value is greater than 0. in the attachment, i just want to populate that count below the column indicated therein. So in the example, desired result is two.
View 4 Replies View Relatedin writing a formula that will count the number of times
the store is listed (Column B) when it matches with closed (Column C).
On the table listed below I will return the data using a match.
From this table
A B C
1/8/2006 9:45Store 1Closed
1/8/2006 9:57Store 2Closed
1/8/2006 10:05Store 3Closed
1/8/2006 10:09Store 4Closed
1/8/2006 10:15Store 5Closed
1/8/2006 10:24Store 1Closed
1/8/2006 10:36Store 2In Progress
1/8/2006 10:41Store 3In Progress
1/8/2006 10:50Store 4Closed
1/8/2006 10:58Store 5Closed
1/8/2006 10:59Store 1Closed
1/8/2006 11:15Store 2Closed
1/8/2006 11:22Store 3In Progress
1/8/2006 11:24Store 4In Progress
1/8/2006 11:33Store 5Closed
1/8/2006 11:51Store 1Closed
1/8/2006 11:56Store 2Closed
1/8/2006 11:57Store 3Closed
1/8/2006 12:03Store 4Closed
1/8/2006 12:16Store 5Not Started
1/8/2006 12:23Store 1Closed
1/8/2006 12:28Store 2Closed
1/8/2006 12:57Store 3Closed
To this table
A B C
1/8/2006 9:45Store 15
1/8/2006 9:57Store 24
1/8/2006 10:05Store 33
1/8/2006 10:09Store 43
I am trying to count data using several criteria
1.Need to add data from for a certain category, say "blue" + data during a certain date but exclue the ones with zeros
My formula using arrays look like this, but it is still counting data with zero in the cell as an item
=count(if(A4:A400(text by category)=”blue”,count(if(O4:O400(date)<”04/01/07”,count(An4:An400)[Actual data],-(countif(An4:An400,0))))))
I have a spreadsheet of over 15,000 lines of student information, sorted by student number. I want to count the number of rows which have a duplicate student number, up to 15 duplicates in a row, and show the total number of duplicates in a Separate Column. I.e.
Column 1 Column 2
Row 1 - 200101 3
Row 2 - 200101
Row 3 - 200101
Row 4 - 200102 2
Row 5 - 200102
Row 6 - 200103 1
I've been trying to use a Countif formula, but I found I had to use so many ANDs and ORs that the formula became too long. I don't know how to use programming code, only formulas in Excel. Is there an easier solution using some type of SUMPRODUCT code?