Use Command Button To Insert Column And Row

Jan 23, 2014

I want to use to use Command button for Inserting column or row....

View 1 Replies


ADVERTISEMENT

Insert A Command Button

Oct 30, 2009

I want to insert a command button and assign a macro, I have the developers toolbar available with the controls section and on all other spreadsheets i can then select insert and choose the required button, however on the particular workbook i want to use the insert button is greyed out and not available.

i already use macros in this workbook and they work fine from keyboard shortcuts but i would like to make one of them run from a command button

Is there a simple setting somewhere which i may have turned off inadvertently previously or could the problem have anything to do with the macros themselves?

View 10 Replies View Related

Insert Command Button On Spreadsheet

Sep 24, 2008

Using excel 2003. Cannot insert command button on a spreadsheet we have. Almost all icons in the control toolbox are unavailable when Im on this specific spreadsheet. Any new documents I open work fine. Is there some kind of protected spreadsheet that wouldnt allow for a button, picture, textbox label to be inserted???
I didnt make the original sheet but am just editing and improving it.

I would really appreciate any advice you could give, I have attempted to attach a jpg showing the greyed out icons in my controltool box

View 12 Replies View Related

Insert Rows (and Copy Formulas) Using Command Button?

Feb 5, 2014

I have a simple command button in my worksheet that will insert a blank row and copy formatting, but not the formulas. How do I adjust the code so that the formulas are copied to the new blank row? This is currently what I have:

Private Sub CommandButton2_Click()
Sheets("WAWF Track").Range("A9").Select
ActiveCell.EntireRow.Insert Shift:=x1Down
End Sub

View 5 Replies View Related

Excel 2010 :: Command Button - Cannot Object Insert?

Sep 2, 2013

I am using excel 2010, i try to insert active x control command button insert but " cannot object insert" like this message came?

View 3 Replies View Related

Excel 2010 :: Using Command Button To Insert Row In Dynamic Table?

Aug 30, 2013

I'm using excel 2010 and I need a command button to add rows to the end of the dynamic table.

View 3 Replies View Related

Command Button To Hide Rows Based On Date Range In Column A

Aug 22, 2014

In one spreadsheet, I want to have a command button that will hide all rows where the date column (column A) shows a date older than one week from today. When this button is clicked again, all rows will unhide again. Preferably the Command button title would change to reflect whether it is on the hide or show cycle (for example "Click to Hide all older than one week" and then "Click to Show all events") .

View 9 Replies View Related

Press Command But And Execute The Code Assigned To Another Command Button

Apr 14, 2009

Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).

View 9 Replies View Related

Command Button Name / Sort By Command Button

Feb 3, 2010

How can I return name of a command button on click? I want to create some sort buttons on a sheet I will use regularly to speed things up. I thought if I could call each sort button by the column letter the button sits in I can use this in a single sub for all buttons

e.g the button sitting in column A is called "A". when i click the button, it returns it's name to a variable which I can then use to sort column A. I know I could create a seperate routine for each button but I was just trying to think of something neater.

View 2 Replies View Related

Run Command Button Click From Another Command Button

Aug 31, 2007

I have a userform with a button on it named But1. Is it possible to store But1 into a variable then activate the But1_Click action using a variable?

Dim strButname As String
strButname ="But1"

Now, how would you activate the But1_Click method using strButname variable. With listboxes you can use the Control(strListboxName) methodology?

This doesn't work, but gives you an idea of what I am trying to do.

Controls(strButname)_click

View 9 Replies View Related

Insert A Button In Spreadsheet - Check The Entire Column?

Jul 13, 2012

I insert a button in spreadsheet, when I click this button a userform appears with place to input value. I would like to check the entire column (maybe < 100 rows), if there is number exceed the input, then disply that ROW in another sheet.

View 1 Replies View Related

Command Button Click Creates New Rows Above Button?

Nov 8, 2012

I currently am using a form button to create new rows.

I need two different kind of buttons. I have a button that does this-

VB:
Sub InsertRow()
'this inserts a row where the button is clicked.
Dim r As Range

[Code]....

However, when I try and create these codes using a Command button (I need it for the color), I get the error

"unable to get the buttons property of the Worksheet class"

P.S one other thing, say the button is in row 3, and Cells A1 and A2 are merged, when you click the button in row 3, it should extend the merge to A3.

View 4 Replies View Related

Command Button - Create A Save Button In Sheet 1?

Mar 9, 2013

i want to create a save button in sheet 1, on clicking the same the data entered in the particluar cells of sheet 1 should get saved in sheet 2 in given format

View 1 Replies View Related

Macro Works With Form Button But Not Command Button

Oct 5, 2006

This is probably really straight forward but cant see why it happens, the following macro works fine when called by a button created by the form toolbar but doesnt when called by a command button, get the runtime error 1004, "select method of range class failed"

ActiveSheet.Select
Range("B4:B37").Select
Selection.ClearContents
Range("G4:G37").Select
Selection.ClearContents
Range("B1").Select
Selection.ClearContents
Range("D1").Select
Selection.ClearContents
Range("F1").Select
Selection.ClearContents
Range("J1").Select
Selection.ClearContents
Range("M2:M3").Select
Selection.ClearContents
Range("B4").Select
ActiveWorkbook.Save
Application.Quit

View 2 Replies View Related

Command Button To Copy Row Of Data From One Workbook To Column In Another Workbook

Jul 24, 2013

I would like to use a command button to copy a row of data from one workbook to a column in another workbook. The row of data will have different values on a daily basis but will always be B2 through BE2. I would like the copied row of data pasted in the next available column to the left in the other work book.

View 3 Replies View Related

Toolbar Command Button As Toggle Button

Aug 13, 2008

I have read several articles saying using a command button as a toggle button can't be done but some articles have said it is possible using the state properties.

.State = msobuttondown
.State = msobuttonup

Is there any way to combine this with the onaction property so that when you press the button, it stays down and activates a macro then when you press it again it pops back up and activates another macro.

View 8 Replies View Related

Command Button

Jul 29, 2008

I have searched this topic but I came up with nothing regarding my exact situation.

I have 5 buttons on sheet 1. I want them to all direct me to another sheet in the same workbook. However, some buttons will contain more than one sheet.

Example: Button 1 will direct me to 4 different sheets. Is this possible?

Also, When I open the workbook, I see many sheets that I am working from but I do not want them to show up when I open the workbook. The only way to see these sheets is to click on the command buttons at the top of sheet 1.

View 10 Replies View Related

Uncheck Check Box + Check A Option Button Using Command Button

Aug 20, 2009

When I press a command button I want to:

Uncheck a checkbox made with Control Toolbox

Check a particular Option Button within a group box made with the Forms Toolbar.

EDIT: Clarification, I want both things to happen when I click one button.

View 3 Replies View Related

Checkboxes Command Button

Jul 6, 2007

Is it possible to check multiple checkboxes with a command button?

For example, I have 20 checkboxes (C5 to C25) when command button is clicked
C5, C12, C17, C20 would be checked.

View 10 Replies View Related

Keep Command Button After Row Is Deleted?

Jun 12, 2014

how to keep a command button in a certain location even if the a row or Column is Deleted or Inserted into the worksheet?

View 1 Replies View Related

How To Delete Row Using Command Button

Jul 31, 2014

I know that this may seem a little strange to request as you can just select the row and delete it, however the sheet is designed as "idiot proof", so I would like to implement this.

Basically, I have a box which states "If you need to delete a row due to incorrect entry, please type the row number here (next cell), and click delete".

I want to know if by using VBA, you can reference the number entered in the cell, and use this to determin the row in which we are required to delete.

View 8 Replies View Related

Command Button Code

Apr 29, 2008

I have a 2 worksheets. One "Projects in Process"and the other "Project Completed". when the users fill in the information in cells A4-F4 (line 4 is the starting line and it could go down as far as line 23 or a23 - f23) In Projects in Process they press a "completed Project" command button and the data in a4-f4 copies over to worksheet "Projects completed". In the next available row (starting at row 4).

View 13 Replies View Related

Toolbar Command Button

Aug 20, 2008

I am running Excel 2003 and in my workbook I created a macro and assigned it to a toolbar comman button, "Copy Filtered Data". This macro copies the visible data into a new workbook.

This works well but others in my company will also be accessing this workbook from a sharepoint and I discovered that when they open it this command button is not on their toolbar.

Would anyone know what I need to do to have this button load on the toolbar when the workbook opens?

Also, I would like this button to either unload or greyout when the workbook that this button is intended for is closed.

View 9 Replies View Related

Clear Command Button

Sep 25, 2008

I want to create a command button that will clear whatever is written in a text box. I guess for this to work it needs to select all, then clear. The command button and the text box have been created using the control toolbox.

View 2 Replies View Related

Programming A New Command Button

Dec 13, 2008

I have created a userform with text boxes and a list box. I have a few questions. First for the list box. I got the information for my list box through the list box example sheet2!A1:A1000. Is there any easier way ? Next I would like to create a New Command button to create a new record. I decided to just do a clear all textboxes, option buttons ect.. to clear, is there an easier way ? I seem to be looping sort of way when I get to txtissue.Value = "" it than goes to txtIssue_Change()

View 14 Replies View Related

ActiveCell And Command Button

Mar 5, 2009

I have a spreadsheet that automatically analyzes the last week's worth of data and then displays a table of summary data from that analysis in the range C2:G11. Each row (i.e. 2:11) represents the statistics from one of the 10 regions in the state. I then have a second "details" table which remains blank (it occupies the range C14:G20; one row for each day of the week) until an "x" is typed in Column H in the cell adjacent to a region's summary data above, e.g.

if I want to display detailed data for region 4 for the last week, I would type an "x" in cell H5; formulas in the blank "details" table then lookup information on region 4 from a larger dataset. This system works fine, but is a little clumsy (typing "x"'s and deleting previous "x"'s, etc.).

Here's what I would like:

1): A macro for this sheet that will place an "x" in the ActiveCell (only in the case that the active cell is somewhere in the range H2:H11), will remove that "x" when that cell is no longer active, and will not place more than one "x" at a time-- for instance if more than one cell is accidentally highlighted

2): Also, I would like to be able to paste the values and formatting of the "details" table (C14:G20) to a separate sheet (we'll call it Sheet2) if they're interesting, and I'd like to be able to do this with a command button. The problem is I don't know... 1: how to place a button on the sheet, 2: how to attach code to this button, 3: where to place this code (can it go in the same place as the ActiveCell macro I described earlier?).

Ideally, the code would allow me to paste an arbitrary number of these tables to Sheet2, so the code would need to be able to identify the first blank cell in Column A as the location to paste a new table when the button is clicked.

View 2 Replies View Related

Input Value Using Command Button

Apr 9, 2009

I have attached a spreadsheet example. I would like to be able to use a command button to pop up a series of questions for the user to input a value and have that value populate the directed cell.

Example from spread sheet:Click - "How many bid" button
First question should be " How many for Joe"
Input the number i.e. 2
The number input should go to the cell C5 in this example
Next question should be "How many for John"
I want to input the number 3
The number 3 should go into cell F5
How many for Jim
I need to input a number
The number should go to cell I5
How Many for Jerry
I need to input a number
The number should go to cell L5

I would also like the same function for the "How many won" button.

View 4 Replies View Related

Command Button Placement

May 26, 2009

I have few problems with the below script. First I dont know exactly where I want the button to be placed since the data changes from week to week. Is there a way for me to place the button with in some merged cells? If so How can I merge some cells when I dont know where the data will end. I'm using this to find the last empty cell in Column "B" plus 2 cells down.

View 2 Replies View Related

Run A Macro From A Command Button

Dec 20, 2009

I have created a command button from the Excel 2003 from the Macros toolbar that I placed on my worksheet. I want to use this button to activate an existing macro. Currently I have no code entered for this button and the button when clicked on behaves as an object to be edited, moved, etc. How should I proceed?

View 6 Replies View Related

Command Button For Sub In Module

Jan 28, 2012

I have 2 Subs in Module 1

I want to link them to a button

When I create a "ActiveX Command Button" it is only links to the worksheet (say Sheet1)

I have tired changing the name below to the Sub in the module but doesn't work.

Private Sub CommandButton1_Click()
End Sub

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved