Excel 2010 :: Using Command Button To Insert Row In Dynamic Table?
Aug 30, 2013I'm using excel 2010 and I need a command button to add rows to the end of the dynamic table.
View 3 Replies
ADVERTISEMENT
Excel 2010 :: Command Button - Cannot Object Insert?
Sep 2, 2013I am using excel 2010, i try to insert active x control command button insert but " cannot object insert" like this message came?
View 3 Replies View RelatedExcel 2010 :: Command Button In Shared Workbook Not Working?
Sep 7, 2010I am using Excel 2010. I am using a shared workbook that was originally created in Excel 2003. This workbook has a command button that is supposed to be clicked to open a userform. However, I cannot even click on the button when opening the shared form in Excel 2010. When the form is not shared, the button works fine.
I have no problems with the button when opening the shared form in 2003 or 2007.
Is there anything I can do to make the command button work while the form is shared and while using Excel 2010?
Excel 2010 :: Using Single Command Button To Apply And Remove Filter
Jan 17, 2014How can i use a single command button to do multiple task in Excel 2010.
First Instance I click -- It filters only With Record "Yes"
Second Instance I click -- It filters only With Record "No"
Third Instance I click -- It removes filter.
Excel 2010 :: Macro To Insert Rows Based On Cell Value Using Button
Nov 10, 2013I am on office 2010
I am new to VBA programming so i might be making a obvious mistake. I am trying to create a macro that will insert rows depending on a cell value. I also need this to be executed from a command button rather then to occur immediately after the cell value is entered. So as a example
Lets say
Cell A2 has a value 20
Cell A3 has a value 3
Cell A4 has a value 5
when this data is entered and then a Command button poressed there should be
20 rows beneath cell A2
3 rows beneath cell A3
5 rows beneath cell A4
Insert A Command Button
Oct 30, 2009I want to insert a command button and assign a macro, I have the developers toolbar available with the controls section and on all other spreadsheets i can then select insert and choose the required button, however on the particular workbook i want to use the insert button is greyed out and not available.
i already use macros in this workbook and they work fine from keyboard shortcuts but i would like to make one of them run from a command button
Is there a simple setting somewhere which i may have turned off inadvertently previously or could the problem have anything to do with the macros themselves?
Insert Command Button On Spreadsheet
Sep 24, 2008Using excel 2003. Cannot insert command button on a spreadsheet we have. Almost all icons in the control toolbox are unavailable when Im on this specific spreadsheet. Any new documents I open work fine. Is there some kind of protected spreadsheet that wouldnt allow for a button, picture, textbox label to be inserted???
I didnt make the original sheet but am just editing and improving it.
I would really appreciate any advice you could give, I have attempted to attach a jpg showing the greyed out icons in my controltool box
Use Command Button To Insert Column And Row
Jan 23, 2014I want to use to use Command button for Inserting column or row....
View 1 Replies View RelatedInsert Rows (and Copy Formulas) Using Command Button?
Feb 5, 2014I have a simple command button in my worksheet that will insert a blank row and copy formatting, but not the formulas. How do I adjust the code so that the formulas are copied to the new blank row? This is currently what I have:
Private Sub CommandButton2_Click()
Sheets("WAWF Track").Range("A9").Select
ActiveCell.EntireRow.Insert Shift:=x1Down
End Sub
Macro/command Button To Reset All Filters In Pivot Table
Aug 22, 2008I have a pivot table with over 4000 entries and about 12 columns which i filter to get the info i want.
Unfortunately with so many rows and columns in the table, if i do a macro that gets each filter back to 'show all' its really slow.
Doing this manually using the "Show all" option in the filter takes a fraction of a second, so surely there must be a way to do this more quickly in VBA?
i can't understand why manually it takes no time at all, but automating it through recording a macro takes forever.
Excel 2010 :: Cell Insert In One Column To Insert In Other Columns?
Mar 23, 2012 I have a master data sheet with four columns, A, B, C and D
Column A has the primary data and B,C,D has dependent data values;
So when I insert a new cell in Column A with cells Shift Down, I want mandatorily new cells to be inserted in the same row in col B, C and D as well so that data integrity is maintained;
Open Outlook From Excel Command Button
Sep 30, 2013Looking for a way to open outlook in minimized state with excel commandbutton? seems like all the code for email put the email in outbox,and will not send.
View 5 Replies View RelatedExcel 2007 :: Command Button Properties
Apr 19, 2014I have managed to create a command button in excel 2007 that performs a macro upon a click. But, after re-opening the workbook, I am unable to right click on the button to recall the properties window.
View 2 Replies View RelatedExcel 2003 :: Attaching Hyperlink To Command Button?
Dec 3, 2006I am trying to attach a hyperlink to a command button in excel 2003. I open the control toolbox, select command button and place it on the worksheet. with the button selected and in design mode I click on the hyperlink button on the toolbar and allocate the hypelink address. Click on the button and it works fine untill I exit design mode then the button stops working.
View 8 Replies View RelatedExcel 2011 :: VBA Code - Command Button Location
Aug 16, 2014I am building a code based on a command button in a row, which will check is a worksheet exists (message), if not create a worksheet from a template (from another worksheet specific to a on a cell value in the same row), rename the worksheet based on a cell value in the same row.
I am having some success for each task with exception to relative cell values .....
As the code will be specific to the row (one button per row) Questions:
how to i determine the location of the button that is clicked? (I assume once this is established i can use to pull values in the same sheet on certain columns....?)
VBA To Copy Data From Excel To Word - Command Button
Feb 26, 2012When you click on a command button what would the vba code be to copy the data from the active excel workbook active sheet so that it ends up in the active word document?
I want the values from:
Cell A1 value in Excel to bookmark name "Text1"
Cell A2 value in Excel to bookmark name "Text2"
Cell A3 value in Excel to bookmark name "Text3"
to be copied into the active word document.
Excel 2010 :: Command Buttons Disappear
May 16, 2011I'm using excel 2010. I have a spreadsheet with a row that is hidden. One cell in this row contains a button. I have a macro that copies this hidden row, inserts it at another point on the spreadsheet and unhides it. It works great in excel 2007, but the button on the hidden row disappears when I close the sheet and re-open it.
View 7 Replies View RelatedExcel 2007 :: Form Command Button Label Length
Aug 2, 2013We just upgraded to Excel 2007 from Excel 2000 and have run into a challenge relating to labeling a form command button. It appears that the length of text for a command button label has been shortened to 31 characters when setting the name using VBA. No such limitation shows up when I manually create such a button.
Following is the code that used to work to create the button and label in VBA (Excel 2000):
VB:
ActiveSheet.Buttons.Add(2.25, 13.5, 443.25, 17.25).Select
Selection.OnAction = "PatientSelectedButton"
Selection.Name = "CheckFormButton"
[Code] .....
If I change the string I want to use for the label to 32 characters, or less, this code works (Excel 2007).
VB:
ActiveSheet.Buttons.Add(2.25, 13.5, 443.25, 17.25).Select
Selection.OnAction = "PatientSelectedButton"
Selection.Name = "CheckFormButton"
[Code] ....
I have to admit that this is the last item that I thought would break!
Excel 2007 :: Export To PDF Command Button Save As File Name?
Dec 17, 2012Excel 2007 I have a button that will export the worksheet to pdf and save it as Acrobat requires. I have a network folder set up and it saves the file with the name that I have programed in the macro. I would like to have the file name set up to be what is in cell C3 then a space and the specific words.
For example, if C3 contains "123456" I want the file to be named "123456_Warranty Calculator"
I will end up using this in several worksheets which will have a different name as part of the file name (based on the worksheet name).
I would also like to have the last part of the file name be the worksheet name. ie, "Warranty Refund", "PDR Refune", etc.
I will have several users that will be using the workbook and possible saving at the same time and want each person to be able to find the one they saved instead of it being overwritten.
Code:
Excel 2007: I have a button that will export the worksheet to pdf and save it as Acrobat requires. I have a network folder set up and it saves the file with the name that I have programed in the macro. I would like to have the file name set up to be what is in cell C3 then a space and the specific words.
For example, if C3 contains "123456" I want the file to be named "123456_Warranty Calculator"
I will end up using this in several worksheets which will have a different name as part of the file name (based on the worksheet name).
I would also like to have the last part of the file name be the worksheet name. ie, "Warranty Refund", "PDR Refune", etc.
I will have several users that will be using the workbook and possible saving at the same time and want each person to be able to find the one they saved instead of it being overwritten.
Excel 2007 :: ActiveX Controls Command Button Opening Worksheet In Same Workbook
Feb 6, 2014I have a workbook with two worksheets, "Main" and "Control".
Both of them are with hidden tabs (unchecked "show sheet tabs").
On worksheet "Main" I have command button which opens worksheet "Control".
The assigned makro is: Sheets("Control").Select
The problem is: when I open "Control" and close after that the workbook, the next time when I open the workbook "Control" pops-up instead of "Main" even though I do not save it.
1. I need macro on "Main" which will allow me to open "Control".
2. Regardless I "Save" or "Don't Save" "Control" when selected and workbook is closed, to open the workbook always displaying worksheet "Main".
I use Excel 2007 (at home) & 2010 (at office).
Excel 2007 :: VBA To Make Command Button Inactive Until User Field Selected
Nov 14, 2011I am creating a userform in Excel 2007 which requires a user to pick their name from a drop down box then press Ok, what i want to do is disable the Ok button until the user field has been selected.
View 1 Replies View RelatedExcel 2007 :: Dynamic Button Adding In VBA
Sep 26, 2013My excel version is 2007 and i am on WIN7 64bit
I have a workbook with VBA which was working fine earlier. Lately i have been getting
"Runtime error 1004" Select method of button class failed.
I am adding buttons dynamically in a loop in a sheet and what surprise me is , i go to debug mode when error pops up and it points to below line
MySheet.Buttons.Add(ActiveCell.Left - 5, 25, 20).Select
but my code is running in a loop and i can see that atleast 20 buttons were added and it fails to select when it try to add this iteration. It is completely confusing me.
My entire below code is in a loop
maWrk.Cells(xIt1, yIt2).Select
mySheet.Buttons.Add(ActiveCell.Left - 5, 25, 20).Select
Selection.OnAction = "callMe"
[Code].....
I also notice that when it fails, on select method .. the button was actually added to the sheet with caption/name as "Button 65536" but then fails to select it. What makes the select to fail after adding the button? Could there be anything special with Button 65536?
Is there any better way to code the adding button and setting action and name for excel 2007?
note before entering the loop i am deleting all the shapes with myShape.Delete which name matches "btRun"
Press Command But And Execute The Code Assigned To Another Command Button
Apr 14, 2009Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
View 9 Replies View RelatedExcel 2010 :: Dynamic Line Chart
Jul 12, 2012I would like to plot the 1st dynamic line chart as shown in [URL] ..... but i never write any excel macro 2010 before, any sample of this?
View 4 Replies View RelatedExcel 2010 :: Pivot Dynamic Name Range?
Jan 27, 2013I am trying to insert a Pivot table with dynamic Name Ranges. It needs to start from Cell B1 as Column A has hidden formulas in them. I created an Dynamic Name range and tried to insert a pivot table. Excel then throws out a error stating "Data source reference is not valid". I tried re-saving the document but still no luck.
View 1 Replies View RelatedExcel 2010 :: VBA - Open Sheet With Dynamic Name?
Nov 25, 2013I have this workbook in which each sheet refers to a month in a specific year (e.g. Jan12, Nov13), plus an "overall" sheet where I would like to, among other stuff, create a button that would lead me to the sheet refering to "today's month".
Although I know how to create a "static" macro that leads me to a particular sheet, I don't know how to create one in which the sheet it refers to is changing every single month.
(Note: I'm using Win7, MSExcel 2010)
Excel 2010 :: How To Auto Update PowerPoint Table When New Data Entered Into Table
Jun 12, 2013I have created a table in Excel 2010 (pls see attached table named post.xlsx).
Then copied the above table into PowerPoint 2010, using "paste link" (I tried to attach the PowerPoint file but the system says "invalid file type" and I cannot attach it).
Question:
I have received income data for another month - the new month is 13 and the corresponding new income is 100.
I typed 13 and 100 into the Excel table post.xlsx and thus extended the table by another column.
Then I went back to PowerPoint slide, then right clicked on the table there, then clicked "update link".
Specific Question:
The newly-typed column in Excel table is not get updated in PowerPoint table.
Excel 2010 :: Create Sheet With Table From Pivot Table?
Apr 26, 2012Recently, the boss showed me a Pivot table & chart, which consists of a list of about 30 user names in the first column. The row headings were the different items they purchased from a vending machine. & when he clicked on any name in the first column, this created a new sheet, renamed with users name, with a small table of results showing what that person purchased.
Problem is, none of us can figure out how to do this. I have created a new Pivot table & chart exactly like the original, but I cannot get the smaller sheet to generate. (Excel 2010)
Excel 2010 :: Insert Username Without VBA?
Apr 10, 2014I'm keen to add a field to a spreadsheet that populates a cell with the username of the last person who edited the file, as in the system or logon name, e.g. first.lastname syntax.
I would however like to keep this sheet as an .xlsx and not have it as an .xlsm. I have the code to use VBA, but is there way to grab the username without VBA to keep the .xlsx format?
I'm using Excel 2010.
Excel 2010 :: Dynamic Dropdown List Of Dates?
Aug 9, 2013I'm trying to create a set of three dynamic/dependent drop down lists of date values, based on a set of imported data. Depending on whether the preferred choice is to list all dates in a range or just dates on the 15th, the available start and end drop down lists will change.
In addition, if possible I would then like to display a list of valid dates (not sure if this needs to be VBA).
The attached sheet shows/explains what I am attempting but here it is as well:
If B3 is set to show all dates in the month then:
the first dropdown option for C3 will be the first date of IMPORT (D2)
the first dropdown option for C4 will be the C3 value, to the last date in IMPORT (D) column
If B3 is set to show 15th of the month then:
the dropdown for C3 will be the first date of IMPORT (D) column with a date of 15th the dropdown for C4 will be in the range of C3 to the last date of IMPORT (D) column with a date of 15th only dates of 15th will be listed in both C3 and C4 dropdownlists
General
the dates in IMPORT column D are taken from IMPORT column A, B & C, which will be imported and will always be date sequential the number of rows of date entries will change with every import but there will never be any blank rows between dates the values in IMPORT columns A, B & C will always be numerical, and can be referenced if required [ideally] the LIST OF DATES will be populated with the date range, based on the option selected in B3
I'm fairly familiar with Excel (2010) and I have also done some VBA but I'm new to dynamic, nested dropdown lists and I'm unsure what the most practical way is to achieve this.