Use A List Of Cells As Range Values
Jun 24, 2006
I seem to have trouble with this type of problem:
Worksheets("distribution"). Range(Worksheets("values").Cells(x, 14).value).value = ""
This is only a portion of the code, but the part that I am having problems with. It is within a for loop, hence the x. The Cells(x,14) is a list of cells, e.g. "u22", "u23, "u37", and I want to use those values as the input to the range object, but I keep getting object-defined error. It worked fine like this when I was using the names of checkboxes in Me.Controls().value . is there some property of the range object that doesn't allow this? As far as I can tell it should work; I'm grabbing the value, which is "u22", which is the type of data the range object needs.
View 4 Replies
ADVERTISEMENT
Oct 30, 2008
I have a problem with finding the value in column B that is found within a range eg: <=1 & >=5 and return the corresponding values found in column A. kindly refer to the attached sample for reference.
View 2 Replies
View Related
Sep 13, 2007
I have two worksheets. Worksheet One and Worksheet Two. In Worksheet One Column A is a list of numbers. I want to look for all of those numbers in Worksheet 2 Column A. Any of the numbers in Worksheet One Column A that are not found in Workseeht 2 Column A I want to list in Worksheet One Column B. I do not want to compare cell to cell but if any number in the first column is found in any position in the second column.
View 3 Replies
View Related
Apr 29, 2008
i have 118 cells and they are changing every 10 second so, how to gather the max value from these cells and displaly them in Marquee box or in pop message?
View 3 Replies
View Related
Mar 14, 2013
I am trying to replace a range of cells with certain values but I can not figure it out. I'm almost there I think but don't know how to get the varying values I'm looking for. So I have a column (AJ in this instance) that has a bunch of "xx" values at different spots within the column. I want to replace those xx values with numbers 01 through 36. What I have below gets me just about there but it replaces every xx value with 01. How do I get it to go 01 on the first one, 02 on the second one, etc?
/code
Dim cell As Range
For Each cell In Range("AJ1", Cells(Rows.Count, "AJ").End(xlUp))
If cell.Value = "xx" Then _
cell.Value = "01"
Next cell
/code
View 3 Replies
View Related
Dec 4, 2007
I am trying to find a way to create a list of unique items from a named range. I have found a few solutions using filters for ranges that are contained in the one column but not named ranges that contain multiple rows and multiple columns.
Is there any way to copy all of the unique items from the named range to another location? Lets call the named range Table1 and it spans from B2 to J100.
View 9 Replies
View Related
Aug 2, 2012
I'm new to excel and was trying to make a workbook that will have a drop down list populate based on a user input in two separate cells. Basically, i have columns: name, pages, and books. I would like to have the drop down list match data by first finding the amount of books read, then finding the amount of pages read. Then any name that meets the criteria will be available in the drop down list. How can I do this?
View 1 Replies
View Related
Feb 1, 2010
I'm working on a project for my company. We make plastic tanks and for quality control we want to start recording the thickness of the tanks in different areas/zones of each tank.
Attached to this message is an Excel sheet that I've been working on. From "Sheet 1", it records inputted thicknesses into WorkSheet "1098". On the top of "1098", it shows all of the recordings, and just below that are the "10 Most Recent Entries".
Right below the "10 Most Recent Entries", there are formulas to calculate the Min and Max Values. Whenever a new entry is recorded, the selected cells for the Min and Max formulas change. Is there a way to force the cells to always stay the same?
View 3 Replies
View Related
Mar 15, 2011
I have two columns of data, which are constantly being added to. Column A is a unique name (no duplicates) and column B is its corresponding value. In many instances the value in column B is zero. I want to produce a list in column C with the names that have a positive value which will update automatically as names and values are added to column A and B. Is this possible?
View 6 Replies
View Related
Jun 19, 2013
I want to show in tab total view the advices for problems which come from a questionnaire. This questionnaire applies to its advices on the basis of given questions of the user. In the advice tab you can see the advice given for each question. Because I have shown in the advice tab in column B if the advice need be in the tab total overview, if this is not the case there is nothing visible there (empty cel). In column C indicated by 1 if the text should be to the overview tab and a 0 if the specified text should not be taken to the tab overview. How can I get in the overview tab only the text from column B which have in column C the value 1 (without the empty cels)? Even when the data in tab advice changes i want that the information in the tab overview also changes.
View 3 Replies
View Related
May 13, 2013
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
View 5 Replies
View Related
May 11, 2009
The sheet has a price list (I attached the sheet). its a width x height(drop) format. If width or height <= minimum width/height then use the minimum listed. if width or height > minimum <=maximum then lookup in table next heightest value. here is the complication. any oversized items are priced as roundup((size -biggest size) / (biggest - second biggest size),0) * ( price of biggest-price of second biggest). so if my widths are
4600 4700 4800
10 25 35
and I am pricing 5050 I would do :-
calculate howmuch its oversize
5050-4800 = 250
Calculate the difference in the last 2 sizes
4800-4700 = 100
Calculate the rounded up multiples
250/100=2.5 rounded up = 3...........
View 3 Replies
View Related
Jan 26, 2012
In A1 of Sheet1!, I need a formula that lists and sorts all the 'unique' values from range
ECWP!$O$6:$Q$1505
View 3 Replies
View Related
Jun 20, 2014
I need to find the average of a list of text cells. My list is in column A, and in column B I've assigned each of the text cells with a numeric value. I'm then doing the average on Column B which will return a numeric value which will represent one of the text values in column A.
My average formula then looks like this:
=VLOOKUP(ROUND(AVERAGE(B2:B48),1),$G$2:$H$25,2,FALSE)
Can do this without using the helper column B and do an average formula using a VLOOKUP?
View 3 Replies
View Related
Jan 28, 2010
I want to control 2 cells values from a dropdown list (linked to another worksheet). How is it possible?
I can do it with embedded ifs as long as the number of values is not too big, but I want to get more extended.
View 7 Replies
View Related
May 1, 2007
I have a spreadsheet with about 300 products listed in column A. In row 1, I have 30 store listed across. This produces a grid of data with sales for the past 3 months. I would like to easily have a list of the product and store that had 0 sales. I have tried a combination of INDEX/MATCH as an array formula but can't get it to work.
View 6 Replies
View Related
May 17, 2008
VBA code to change a cells value in a column and the adjacent column to the right of it. If the column has a negative number in it, I need to put the absolute value of that number into the next cell over on the right. I then need to change the original column values to 0. I've added a spreadsheet that shows an example and the desired output.
View 3 Replies
View Related
Aug 2, 2012
Assuming I have a data set like this :
column a column b
916 12,5
916 23,4
923 34,5
923 23,9
932 98,6
934 67,7
How can I get a sum of all cells in column b when values in column a are equal?
View 5 Replies
View Related
May 28, 2009
I'm trying to do is search a range of cells for a range of values AND then see if it matches one other value in another range of cells. In this case,
=SUMPRODUCT((T3:T49="P6")+(T3:T49="P5")+(T3:T49="P4")+(T3:T49="P3"))*(U3:U49="w")
T3:T49 can equal P6 or P5 or P4 or P3 but the cells can only be counted if U3:U49 is 'w' as well
View 3 Replies
View Related
Mar 19, 2008
1. I have two workbooks (eg. workbook1 and workbook2)
2. I compare the cell values in workbook1.sheet1.cell range (d6:d20) and workbook1.sheet2.cell range (d6:d20).
3. If the values in the range of cells are same, I want to take the value in workbook1.sheet2.cell range (d6:d20) and copy to workbook2.sheet1.cell range (d6:d20).
View 6 Replies
View Related
Feb 13, 2014
I need an autofilter which filters rows based on a list of values (+50).
The problem is that I am looking for rows INCLUDING values from the list, not for exact match.
I am not able to make excel filter values including the values from the list... I am able just to filter values matching exactly values from the list.
[Code] .....
View 2 Replies
View Related
Mar 7, 2014
Each day I am going to have a list of about 300 different ID numbers, which i have already got a macro for creating, that outputs them into a single column on a sheet.
The next challenge Ill face now, is that I'll have a list of maybe 500 ID numbers in another spreadsheet.... I need a way to basically tell excel to keep rows that contain the numbers in 1 column on the list of 500, that correspond with those on the list of 300.
Numbers that are not found on the list of 300 ID numbers, must be deleted, along with the entire row.
I essentially need a macro that runs something like this that i found online, but instead of it just looking for the word "apple" as rows to delete, i would need it to check to see if the number is one of the 300 on my list.... and delete the row if it is not on the list
PHP Code:
Sub Delete_Rows()Dim rng As Range, cell As Range, del As RangeSet rng = Intersect(Range("A1:C20"),
ActiveSheet.UsedRange)For Each cell In rngIf (cell.Value) = "Apple" _ThenIf del Is Nothing ThenSet del = cell
Else: Set del = Union(del, cell)End IfEnd IfNext cellOn Error Resume Nextdel.EntireRow.DeleteEnd Sub
View 3 Replies
View Related
Feb 24, 2010
Is it possible to use the Combobox ListFillRange to list values from two groups of cells? For example, in column 'A', I have the values, 1,2,3; and in Column 'B', I have the values, A, B, C. I want to list the values in column 'A' along with the value of say, B, in Column 'B'.
combobox.listfillrange = "Sheet1!A1:A3" < ---- how to include value B from column B in this list? Or, how to get value A from column B?
View 8 Replies
View Related
Dec 19, 2006
How can I get a combobox to list the values in a range of cells eg.
A1:A5 = 1,2,3,4,5 etc
I've tried...
ComboBox1.List = Range("A1:A5")
But that dont work (it was more of a guess)
View 9 Replies
View Related
Dec 11, 2009
Semi-Related topic: http://www.mrexcel.com/forum/showthread.php?t=434301
what i was wondering is if there was a way to take a list of data (only look at the letters before the "-") and make a list of it..than i column "T" use a countif formula (i can do this part just forgot to include it)
so if "MCS-69257" was added to the list in cell "C8" than in "S6" it would say "MCS" and "T6" would say "1"
Sheet10
C2ABC-259153CXS-280374XCG-265065TAS-199816ABC-114197CXS-21045
Excel tables to the web >> Excel Jeanie HTML 4
Sheet10
ST2ABC23CXS14XCG15TAS1
Excel tables to the web >> Excel Jeanie HTML 4
View 9 Replies
View Related
May 25, 2006
let's say there's a range of cells A3:C10. Some of the cells will have a number in them. I want to compare the numbers in that range to a fixed list of numbers, let's say 1-10. After comparing the numbers in the range with the numbers in the fixed list I want excel to list the numbers that don't match. In other words if the range contains 3,7,8,9, I would want to return 1,2,4,5,6,10 as the answer either in one cell or a group of cells. I know this can be done, just can't do it in an elegant way. I would have to use a lot of steps when I'm sure there's a few simple lines of code.
View 9 Replies
View Related
Mar 26, 2014
I have an issue with being able to process my data i have a text file in notepad that lists a massive amount of values (enough for excel to process if they are listed down a column but not across a row) each separated by a space. As an example here is a small portion of the data.
81768102 191193210 386225426 110858190 393958997 21773704 22450052 70617438 843133051 103582830 370163346 819494826 109538724 846339187 19638405 50748904 476397524 128490548 134215188 252862729 387318907 82658728 15822910 199255054 172623979 59872284 773581712 124854321 547098635 604524102 45265054 203132867 225629848 215828319 14779508 300950341 715797961 329121584 366323012 583555062 917794380 216847744 784432795 606179111 537865871 500392632 37701513 830010548
I know how to import this as text but i can only wither get it all in one cell or across the 1st row. The first row can only display about 16000 values and that isn't enough for my end product to be accurate enough.
So is there any way to import the text file and have it formatted so a each new value has its own row? For example...
81768102
191193210
386225426
110858190
393958997
21773704
Or is there anyway to get the data from my already imported giant A1 cell into the above format?
Added an example of how it looks and how i want it to look. This is how it looks when i open the txt file containing my data in a way that all values stay in the excel sheet. As well as this there is an example of how i want it or rather need it to look.
View 9 Replies
View Related
Oct 2, 2007
i have a list which is populated with data from another sheet.. if there is no data in the corresponding cell on the other sheet then the cell is blank.. i've tried using:
=OFFSET($Z$2,0,0,MATCH(REPT("z",255),$Z:$Z))
but it doesn't see the blank cells as blank i.e. no data in them as they contain formula's.. (even although there are no values populated) - can anyone offer any help in relation to this???
View 9 Replies
View Related
Jan 21, 2010
I've used this site for help many times, but this was the first time I couldn't find the answer to my question through searching. I've looked all over this site & elsewhere, tried 2 dozen different solutions, and nothing seems to work.
I've used a budgeting spreadsheet for years, which lets me plan bills weekly according to paychecks. For each month, going down the "Expenses" column, there lists are seperated by when they'll occur. So there may be three blank cells, then electric bill, mortgage, blank, blank, cable bill, blank, cell phone, blank, gasoline.
On the checkbook worksheet, I want to enter a drop down box for the Expenses. The problem is, every solution I've found for doing this is aimed at eliminating blank spaces at the end of the list. This by necessity has to have blank spaces throughout the list, but I would like them to disappear in the drop down menu.
View 3 Replies
View Related
Apr 21, 2014
In cell H5 there is list of dates and in H7 there is codex, based on these two conditions in H11 a data validation list should be populated from the code_sheet using column B. The populated list should be unique entries, as the column B in code_sheet has duplicates.
View 9 Replies
View Related
