List Changing Range Values
Apr 29, 2008i have 118 cells and they are changing every 10 second so, how to gather the max value from these cells and displaly them in Marquee box or in pop message?
View 3 Replies
ADVERTISEMENT
Changing Values In A Range Using Input Box
Jul 26, 2006I have a spreadsheet that has multiples ranges. Some values are displayed as negative values. I would like to create a macro that allows me to first select the range/s, (maybe using a input box) I want to change and then display the negative values as positive values.
Would I need to create a separate macro to do the opposite (change the values that are positive to a negative value)?
The other macro I’m trying to create is a similar type. What I would like this macro to do is first select the range I want to change and then divide all the cells in the range by 100000
Array Changing And Formatting - Range Of Values
Mar 4, 2013I have an array that refers to a range of values:
Dim vtimeheader As Variant
vtimeheader = Worksheets("output").Range("e4:xfd4").Value
(1) I now want to delete all values in the array
(2) I want to apply the format "General" to all the cells in the array
Changing Single Formula Range With Input Values?
Aug 7, 2014I have data in column A and formula in D2 is =MAX(A1:A1)
If i enter 12 in B2 cell
....... and 5 in C2 cell formula in D2 should change to =MAX(A12:A17)
If i enter 140 in B2 cell
........and 30 in C2 cell formula in D2 should change to =MAX(A140:A170)
I tried entering INDIRECT function inputting value in B2 as A12 instead only 12 but not fully succeeded
Multiply Range Of Cells By Cell Reference Without Changing Hard Coded Values?
Aug 20, 2014I am trying to multiply a range of cells by a cell reference. The cells currently have hard coded values in them. I know with past special you can multiply a range of cells by a copied #. I want a similar function to that just instead of a copied cell its a cell reference. No VBA.
View 5 Replies View RelatedChanging Cell Color Based On Changing Values
Sep 16, 2009This may have been answered on here but can not seem to find it. My situation is I have values in A1,A2 & A3 that are like counter reading so the value is always changing. What I am looking to do is change the cell color if one of the values is over 500 from the other two values. Say A1 is 3000, A2 is 3250 and A3 is 3500. I would like the cell for A3 to change color.
View 2 Replies View RelatedList All Values Found Within A Range.
Oct 30, 2008I have a problem with finding the value in column B that is found within a range eg: <=1 & >=5 and return the corresponding values found in column A. kindly refer to the attached sample for reference.
View 2 Replies View RelatedUse A List Of Cells As Range Values
Jun 24, 2006I seem to have trouble with this type of problem:
Worksheets("distribution"). Range(Worksheets("values").Cells(x, 14).value).value = ""
This is only a portion of the code, but the part that I am having problems with. It is within a for loop, hence the x. The Cells(x,14) is a list of cells, e.g. "u22", "u23, "u37", and I want to use those values as the input to the range object, but I keep getting object-defined error. It worked fine like this when I was using the names of checkboxes in Me.Controls().value . is there some property of the range object that doesn't allow this? As far as I can tell it should work; I'm grabbing the value, which is "u22", which is the type of data the range object needs.
List Values Not Found In Another Range
Sep 13, 2007I have two worksheets. Worksheet One and Worksheet Two. In Worksheet One Column A is a list of numbers. I want to look for all of those numbers in Worksheet 2 Column A. Any of the numbers in Worksheet One Column A that are not found in Workseeht 2 Column A I want to list in Worksheet One Column B. I do not want to compare cell to cell but if any number in the first column is found in any position in the second column.
View 3 Replies View RelatedList Unique Values From A Named Range
Dec 4, 2007I am trying to find a way to create a list of unique items from a named range. I have found a few solutions using filters for ranges that are contained in the one column but not named ranges that contain multiple rows and multiple columns.
Is there any way to copy all of the unique items from the named range to another location? Lets call the named range Table1 and it spans from B2 to J100.
Dropdown List Range Based On Two Different Cell Values
Aug 2, 2012I'm new to excel and was trying to make a workbook that will have a drop down list populate based on a user input in two separate cells. Basically, i have columns: name, pages, and books. I would like to have the drop down list match data by first finding the amount of books read, then finding the amount of pages read. Then any name that meets the criteria will be available in the drop down list. How can I do this?
View 1 Replies View RelatedPrice List Lookups And Additonal Calculations For Out Of Range Values
May 11, 2009The sheet has a price list (I attached the sheet). its a width x height(drop) format. If width or height <= minimum width/height then use the minimum listed. if width or height > minimum <=maximum then lookup in table next heightest value. here is the complication. any oversized items are priced as roundup((size -biggest size) / (biggest - second biggest size),0) * ( price of biggest-price of second biggest). so if my widths are
4600 4700 4800
10 25 35
and I am pricing 5050 I would do :-
calculate howmuch its oversize
5050-4800 = 250
Calculate the difference in the last 2 sizes
4800-4700 = 100
Calculate the rounded up multiples
250/100=2.5 rounded up = 3...........
List And Sort Unique Values In Multi-column Range
Jan 26, 2012In A1 of Sheet1!, I need a formula that lists and sorts all the 'unique' values from range
ECWP!$O$6:$Q$1505
Autofilter Based On List Of Values In Range (Include Not Exact Match)
Feb 13, 2014I need an autofilter which filters rows based on a list of values (+50).
The problem is that I am looking for rows INCLUDING values from the list, not for exact match.
I am not able to make excel filter values including the values from the list... I am able just to filter values matching exactly values from the list.
[Code] .....
Select A Range That Will Be Changing By Column: Method 'Range' Of Object '_worksheet' Failed
Jan 6, 2010I'm trying to select a range that will be changing by column. I'm not sure why my syntax isn't working. What I've got:
View 2 Replies View RelatedStop Graph From Changing Named Range To Formula Range
Sep 8, 2006I am trying to create a graph for a range of data that updates monthly (adding an extra month each time). I wanted the graph source data to update automatically each time the data is refreshed so used an OFFSET formula to identify a named range. I then point the graph to the named range as the source data.
When I enter the range as the source data the graph picks it up. However, when I re-enter the source data option on the graph it has converted the named range into a cell written range (ie. replaces "=QUALITY" with "='Front page'!$B$7:$J$10" - which therefore will not update when the range increases.
Changing The Background Of A Range Based On Text In The Range
Oct 20, 2008I have been tasked with creating a scheduling system for my work. There are three groups of shifts that can be selected, Opens, Swings, and Closes. I have been asked to make the cells turn red if a user selects a sequence of shifts. We are trying to avoid having a person working three scenarios:
Close>Swing>Open
Close>Off>Open
Close>Open
If they select the shift that meet this scenario, then I need the cells to turn red. The complete list of shifts are on the "Data" tab and the the three scenarios have been inputted into the "Jan" tab in E13:G15.
I am using the code below to change the background of the cells in my worksheet based on what is in the cell. How can I modify it to accomplish the changes below and meet the criteria above?
Changing Contents Of List Via Validation
May 15, 2009SOLVED
Attached is my example.
I want to have the data in a Named List display automatically in a certain column, and the data be dependent on the choice in a cell with a List Validation.
Choose "option 1" in the Cell's drop-down, and in the specified area appears all of the data in the "option 1" referenced List.
Copy From List With Changing Row Count
May 6, 2014Any way to copy cells from a list of employees. I have already shortened the list significantly, which is based on the location... from over 700 employees down to a possible 30 rows. Now, I want to be able to copy the exact number of employees to an employees list in my form.
Say the list is from A7 to A36, but one time the location may only have 4 employees and the next time there may be 7 employees or whatever. I tried copying the entire list and pasting the list as values, but it pastes the empty cells as duplicates - conditional formatting is on to show if a name was manually entered twice in the list.
I have a cell showing the number of employees in the location, but I'm not sure of the code to dynamically copy from cell A7:A# based on the employee count. So, I'm always going to start in A7, but the end may change. I thought about using End(xlUp), but it stops at the last formula and I tried searching the internet for the right words, but I have had no luck.
Find Max Value Of Dynamically Changing List
Jun 20, 2008my file was too big to attach, so to get it, go to [url] (p: SOCIALCHARM [all caps]). It's the only file underneath the 'documents' section.
This is a complex sheet, so I won't go into everything I'm doing, but really just the part I need help with. Instead of trying to explain it abstractly, I'll use a a concrete example (you'll need to look at the sheet to understand this).
The general idea is that I results from an online ad campaign (ie I ran ad X on site Y in position Z), and - given the results I have - try to optimize which ads I run where. Each in the real data (row 167 and below) represents a 'space' where an add can be run.
First, row 551:
The original recommendation is in Column T, which is Brand "Buddies" (column V). The total # so far for brand "Buddies" (col W) is less than the limit, so Column X = 0, and the updated recommendation (Column Y) is just the original recommendation from Column T.
Now, row 552, (the condition I'm having trouble with)
The original recommendation is in Column T, which is Brand "Pink" (column V). The total # so far for brand "Pink" (col W), however, is now OVER the limit, so Column X = 1. This means that excel now needs to search all of the creatives (in column E), filter out all the ones that don't match the size of the current creative in question (ie that are not of size 300x250 - E551), ALSO filter out any creatives of brands that have already hit their limit (in this example, brand "2-in-1" has already hit it's limit, as you could check by looking at X537), THEN, from the remaining creatives (ie those of size 300x250 and not of brand pink OR of brand 2-in-1), select the creative with the highest value in Column AI).
Changing Cell Text Color When Out Of List Scope
Feb 5, 2009I have a worksheet with 3 particular columns (L,M,N) that have drop down menus. The menu is populated with items that are referenced on a different workbook (different file). Because there are multiple worksheets accessing the referenced list, this is a master. When I change the master, the lists update, but the cell text does not. Example:
If I chose apple from the list, but later in the master I decide I want apple to be banana, while the drop dowm box will now have banana instead of apple, my cell still says apple.
I don't necessarily want apple to change to banana, but I want a visual cue that this is incorrect. I wanted the cell text to change to red if it is not equal to any of the list items on the master file. I want this to be passive, i.e., I want it to change automatically, so I don't have to press a button or some other activation.
Changing Selected List Option To Single Character?
Jul 7, 2009I'm creating an excel spreadsheet that will be sent out to a few users to enter data into. In this spreadsheet, multiple columns contain drop down lists created using the Data Validation tool. The lists are referencing named ranges on a second worksheet.
In these drop down lists are terms that consists of one or two words. What I'm trying to do is when a user goes to select an option from the drop down list, I want the matching one letter code to be entered into the cell instead. For example,
Column AK has drop down list with following options:
Good
Moderate
Poor
When a user selects one of the options, I want one the following respective letter to appear instead......
Generating A Repeating List Of Names From An Ever Changing Roster.
May 2, 2006I have a workbook where Sheet 1 Col A is a list of dates. Sheet 2 Col A is a relatively short list of constantly changing names. I need to put this list of names in a repeating fashion in Sheet 1 Col B. Ideally I would like for Sheet 1 to regenerate Col B each time the roster list is changed.
View 5 Replies View RelatedChanging Chart According To 3 Selections Of Validation Data (list)
Nov 28, 2012I would like to find out how can I create a chart, where it is interacting with the selection of 3 drop down list (created from data validation-list option). It will show up to 12 months of data.
First list would have only Male & Female, 2nd list would have 1st Class, 2nd Upper, 2nd Lower, 3rd Class and Pass Only, 3rd list would have all the months of 3 years.
My data is from J9:U22. These data needs to be changed accordingly, reading from D45:U58.
For the graph, if I select Male, 2nd Upper, and Jun-2012, I want it to show only this selection, where the period will be from Jul-2011 till Jun-2012.
Previously I have done one, with only 1 selection of drop down list, where I used Vlookup. Now involves 3 criterias.
Or is there an easier way to do it?
Updating VData List In All Sheets By Changing DynRange
Jul 13, 2006I have a raw_data sheet with a list that is linked through
Insert> Name>Define. This list is used for Validation Data List drop
down menus in other sheets. I would like to update a
list element in my raw_data sheet and have the corresponding element in
other sheets also update. Is this possible or is there another way to
do this?
Changing Values With = RAND()?
Dec 29, 2009When I use the =RAND() function, everytime I do anything within my spreadsheet the number changes. Is there a way to get that number to change after(for example) 10 refreshes of my spreadsheet instead of every single time I do something to it?
View 6 Replies View RelatedChanging Conditional IF Values
May 29, 2009I have two worksheets. One is called "Orders" and the other is "Invoice2".
On my "Orders" sheet I have a listed of product codes and ordered quantity. One column being ordered quantity and the other being product codes.
For instance it is like this:
Product Codes Ordered Quantity
TH1 5
AB3 0
JC5 10
LFK 11
On my "Invoice2" sheet I have a column for product codes and ordered quantity. Basically, I want the "Invoice2" sheet to reference the "Orders" sheet in relation to these columns. However, on the invoice I only want to display the product codes ordered and ordered quantity. For instance TH1 would be the first line and JC5 the second line. This is because AB3 is less than 0. So ever product code on the "Invoice2" sheet must be greater than 0 in ordered quantity on the "Orders" Sheet. This is what the invoice2 sheet would look like:
Product Codes Ordered Quantity
TH1 5
JC5 10
Run Macro If Values Are Changing?
Dec 21, 2011I have a code that clears the content of a cell if the value of that cell exceeds two.
Code:
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
If Cells(1, 1).Value > 2 Then Cells(1, 1).ClearContents
End Sub
My problem is the value of this cell comes from a function and changes every second automatically (linked to a data feed). So I'm not changing it manually, therefore my code is not working unless I touch it. I just wanted to ask if I can add a code onto this which checks the values and runs the ClearContents macro if there is any change.. I've got a few sheets like this so I need this to run in the background..
Changing Values To Text
May 28, 2012i have a spreadsheet that has 3 shifts. its a weekly data sheet. i have 52 sheets for every week of the year. so far i have a "data" sheet aswell. this is the first sheet. I use this data sheet to generate the information or the other 52 sheets. example is you enter the date of the first monday of the year and it generates the dates on all of my sheets for the whole year. i would like to do something similar for the shifts. i would like to have a cell the enter the shift of the first supervisor on that first monday and have all the shifts generate. 1=nights,2=days,3=afternoons. but i do not want the number to appear i would like the word. the set up goes like this:
DATA E9 = the first number for shift to generate all other numbers
A5 = cell to display first shift
A22= cell for the next shift
A39= cell for last shift
on sheet1 i have A5 as =sum(DATA!E9)
i would like A22 to be the shift after example if A5 as 2 for days than A22 would be 3 for afternoons and A39 would be 1 for nights.
preferably displayed as DAYS/AFTERNOONS/NIGHTS
Random Selection Of Cell Value From List Based On Changing Weighting
Apr 24, 2009I have a list similar to the below:
#....|Name.... | Weighting %
1Artur Boruc 1
2Igor Tudor 5
3Alessandro Grandoni 3
4Gian Elia Amoretti 3
5Olivier Kapo 12
6Kim Källström 13
7Emiliano Bigica 13
8Julio Baldivieso 12
9Fabrizio Miccoli 13
10Peter Vougt 14
11Massimiliano Esposito 12
What I want to do is randomly select either number 1 to 11 (leftmost column OR the person it represents) but also make the selection based on the percentages in the rightmost column. To illustrate using the above example, Number 11 (Massimiliano Esposito) should have 12 times more chance of being randomly selected than Number 1 (Artur Boruc)...
I have used a formula such as
PHP
=INDEX(A$1:A$11,INT((RAND()*11)+1),1)
to randomly select a cell but how would I modify this to include cell weightings? Or is there a better formula?
An additional note I have is that the weighting for each person will always be changing, but will always be a percentage.