I have a userform that has a multi page on it with 4 pages. I notice that there is no way to have the individual pages be set to a click event- or none that I see anyways.
What I am wanting is for a series of events to happen based on what page the user chooses from the four (like a userform initialize type event).
Is it possible to Change Start Page Of Multi Page UserForm Based on 8 CommandButtons. on a WorkSheet, for example.
CommandButton1
UserForm1.MultiPage1.Value = 0
CommandButton2
UserForm1.MultiPage1.Value = 1
CommandButton3
UserForm1.MultiPage1.Value = 2
CommandButton4
UserForm1.MultiPage1.Value = 3
Could I use 1 multipage UserForm Instead of 8 UserFoms. Is it better to use 1 multipage UserForm with 8 pages or 8 UserForms. I dont know if this make sense or not?
I have a MultiPage userform and I'm adding (4) control buttons - CancelButton, BackButton, ForwardButton and FinishButton. On the first page, those names are fine but when I get to subsequent pages, I get an ambiguous error if I try to name the controls the same. But the code will all be the same. What am I missing? In an example that I have, the user was able to name all the controls with the same name. What setting would control that?
View 5 Replies View RelatedI've got a userform with multiple pages, and in my userform initialize sub I set the focus to "combobox1" on "page1". When a user is on page2 of the form and clicks my "ClearData" button, which calls the initialize event, I get a run time error 2110 - "Can't move focus... etc" I would like users to have the ability to clear the form and start over no matter what page they are on.
View 8 Replies View Relatedi'm trying to build an app that'll take a user through 5 or 6 steps of a process, with maybe 2-3 substeps in some steps. right now i'm currently using a multipage Userform , but all the tabs make the whole thing look cluttered (even when there's a "Next" button in plain sight). this is especially because i've put each substep as a multipage form under that step's page (multipage forms inside a multipage form). so steps 1-5 would each have their own pages (1-5), then in page 1 you'd have another multipage form (1.a. - 1.c.). is there a way to make it look simpler? i'd like it to look a bit like a Wizard (ie remove all the tabs), but the only way i can think of is to throw a whole heap of controls on one page, and turn them visible/invisible each step of the way.
View 4 Replies View RelatedIs it possible to create a userform that mimics the Properties userform using VBA by itself. I'm not sure what the form style would be called otherwise I'd have googled it; but it looks pretty cool.
I have one userform that loads combobox values upon userform Initialize. Though through a second userform changes can be made to anotherworkbook this workbook is saves any changes. when i close the second userform i need to rerun the 1st userform Initialize event to update the combobox's incase changes have been made.
View 5 Replies View RelatedWhen I run the userform initialize procedure to reset the values in text boxes and the like instead of resetting like it should, now it closes the userform completely and then won't allow me to show it again, what could be the problem?
Private Sub UserForm_Initialize()
Me.MultiPage1.Value = 0
TextBox3.Value = ActiveWorkbook. Sheets("Sales Invoice"). Range("G15").Value
Dim hWndForm As Long
Dim hMenu As Long
hWndForm = FindWindow("ThunderDFrame", Me.Caption) 'XL2000
hMenu = GetSystemMenu(hWndForm, 0)
DeleteMenu hMenu, SC_CLOSE, 0&
End Sub
The Dim stuff down is to gray out the x button, there are also some module level declarations to go with that...
Private Declare Function FindWindow Lib "user32" Alias "FindWindowA" (ByVal lpClassName As String, ByVal lpWindowName As String) As Long
Private Declare Function GetSystemMenu Lib "user32" (ByVal hWnd As Long, ByVal bRevert As Long) As Long
Private Declare Function DeleteMenu Lib "user32" (ByVal hMenu As Long, ByVal nPosition As Long, ByVal wFlags As Long) As Long
Private Const SC_CLOSE As Long = &HF060
the userform shows when the workbook opens and is then hidden when the user has finished entering values, then when the user goes through the process of being asked to print and save, they are then asked if they would like to create a new record, if yes then it shows the userform again, but the userform is still filled with all the stuff previously entered. I tried using the unload me instead of hiding and that wouldn't work at all, didn't give errors just didn't show the userform either, this at least shows the userform, but now when the user goes to clear the information by initializing the userform again, it simply closes the userform and then it can't be shown again either.
[url]
This is the link to the ZIP, and here are some instructions for setting it up to work.
The contents of this need to be unzipped into a folder called SyntheticShield that is placed in the C: drive that way all paths begin with C:SyntheticShield and then the other folders or files will be referenced correctly. The template I'm having problems with is the SyntheticShieldInvoiceMaker template, when you open it you'll be prompted whether you want to create a new invoice, number is final blah blah blah, say yes, then it will ask if you are importing from the Quotemaker which you aren't say no, it should then show the userform as it should. Then you can go through that process and by pressing either the create invoice or go to template directly whatever, you can hide the userform. Then you press the command button (red) a userform is brought up asking if you'd like to save without emailing, save with emailing or close controls, as for right now, I'm just getting the save without emailing to work the rest is all the same just a few tidbits of code. So click save without emailing, it should then prompt an are you sure message box, click yes it will do some things, then it will ask if you want to print, click no, then it will ask do you want to create a new invoice, click yes, this should then start the process all over again by calling the workbook_open procedure, however, when you go through everything, and click no to the import from quotemaker part it won't show the userform. And at one point it would, but then I couldn't initialize the userform without it disappearing and not being allowed to be shown...I tried putting a command button on the template to show the userform, but it wouldn't do it either.
I have the following in a standard module:
Public Sub Timesht()
userform1.Show
End Sub
And this in my UserForm module:
Private Sub UserForm_Initialize()
'//Populate ComboBox1
Sheet1.Range("K5", Sheet1.Range("K65536").End(xlUp)).Name = "CODE"
userform1.ComboBox1.RowSource = "DATA BASE!CODE"
End Sub
I have a named range as "CODE" in my DATA BASE!, sheet1.
I keep getting an error: " 380: Could not set the RowSource property. Invalid property value."
when I type in UserForm1 and arrow down. in turns into lowercase letters.
I have two userform combo boxes, the second follows up on the results of the first.
The second Combo Box looks for incomplete fields and provides them in a drop box. If the data the second Combo Box is looking at (This is different data than the first Combo Box is looking at.) is complete it updates the field, if not then it adds it to the drop down list.
My problem is this, if it finds everything updated and nothing is added to the drop-down list, how do I exit? I just want a complete break where all programming ends.
I am in the Initialize subroutine and I have tried Exit Sub and it still brings up the user form.
The initialization code of a userform I'm using has started causing me 'Runtime Error 13, Type Missmatch' and I can't figure out why. Can anyone see a reason why I may be experiencing this,
Private Sub UserForm_Initialize()
'Get Last Entry
Dim countnonblank As Integer, myRange As Range
Dim SDate As Date, SDateRange As String, EDate As Date
Dim SDateString As String, EDateString As String, DirString As String
'count cells with data in them
Set myRange = Sheets("textfilemerger").Range("A:A")
countnonblank = Application.WorksheetFunction.CountA(myRange)
'decide if data is present or not
If countnonblank = 1 Then.............................
I have a user form called frmAddRepresentative. Under the Initialize event I have the following code.
Code:
Private Sub UserForm_Initialize()
'This procedure runs when the frmAddRepresentative form 'is initialized. The procedure sets the repInformation
'sheet as the look sheet sends the focus to the combo box 'used to enter the name and updates the combo list
Set WS = calcRepInformation
UpdateComboLists
Me.cboRepName.SetFocus
End Sub
I am getting the following error: Could not set the List property. Type mismatch. I have the exact same code on other sheets and it works fine.
I am trying to SetFocus on a single textbox in a simple form. I am not sure if I am doing it right.
Private Sub UserForm_Initialize()
' On Error Resume Next
' Dim rheadings, cl As Range
'
' Set rheadings = Worksheets("CONTACT").Range("A1:F1")
' For Each cl In rheadings
' Me.cbxSearchWhere.AddItem cl.Value
' Next cl
With Me
tbxSearchCrit.SetFocus
End With
End Sub
Kind regards, Mentor Auto Merged Post Until 24 Hrs Passes;Hi: I answered my own query - just commented out the setfocus instruction and it defaults to the first, and only, textbox by default
I have a userform that creates labels and checkboxes for those lables on the initialize event based on an if statement. I would keep getting an error on a line where I try and use the name of one of those created checkboxes of "variable not defined" as if it hasn't been created, but it was.. Here is the code for the creation:
'Option Explicit
Private Sub UserForm_Initialize()
'dynamically add the tickers and funds based on if there is any data inputs for them.
'declaring variables
Dim lbl As MSForms.Label
Dim i As Integer
Dim x As Integer
Dim newcheckbox As MSForms.CheckBox
'selects the summary page
Sheet1.Select
For i = 7 To 65
If Cells(i, 3) "" Then..................
Can i have the caption of a multi-page tab caption change on the result a given cell?
i.e. in the attached example i would like page 1 to be the result of B2.
what is the differance between a multi page control and a tab strip control
View 4 Replies View RelatedWhat are the differences/advantages to these 2 controls in a User Form?
I have already seen that the tab strip doesn't seem to toggle b/t pages, as a frame I placed remained on both "tabs" (I am wondering what it does if you can't toggle).
Have very recently been upgraded to Windows 7 with Excel 2010 at work. On printing out a 10 page doucment, (all of which are landscape format), when vewing print preview, the first page is previewed as landsacpe, but subsequent pages are portrait.
If you change format of 2nd page to landscape all subsequent pages switch to landscape.
Have looked at a similar format document created last month and it behaves exactly the same. Whole document landscape but on print preview only first page is...
Whats the VBA code for transfering selections on a multi select list box to a page.
ex. the list box has selections from 1 to 20 and I want to select 3,4, and 5
then on the page I want it to say 3,4,5
I want to have the top half of the userform colored in Red and the bottom half in green. This is not something of much practical use but would be cool and certainly very educational to see if could be done.
I have been searching to see if i could find some snippet Win GDI API codes which i could adapt to Excel and am also asking here maybe someone has seen this done in excel userforms before.
Enter Data To Multi Sheet Through Userform. How can I enter Data from entryform to multisheet?
View 6 Replies View RelatedI would like to add a combobox type control that will allow multiple selections. I know that the combobox in the MS Forms Object Library only allows single selections and that the list box is the way to go to allow multiple selections, but I am trying to keep the form as small as possible. I would like to add a control similar to the one used on pivot charts, where the user clicks the dropdown box and can select multiple items. I'm hoping this control is installed with MS Office and just needs a reference to it, but I am open to installing third party controls as well.
View 7 Replies View RelatedI have a user form with multipage.
With the use of the option buttons,the page needs to made visible or invisible.
Example: on Page one, i have placed radio buttons as page2,Page3&page4.
By default only page 1 should be visible and when we select radio button page2, page2 should become visible or else it should be invisible,when we select radio button page3, page3 should become visible or else should remain invisible.
I have a UserForm which has a multipage with 2 pages, each page has many controls and associated code. I now need to add a third page but cannot get the code supplied to work.
VB:
Sub AddNewPage() Dim NewPage As Page Set NewPage = frmColEd.mpCust.Pages.Add(, , 2) NewPage.Caption = ThisWorkbook.Sheets(2).Text frmColEd.Show End Sub
frmColEd is the name of the user form and mpCust the name of the multipage on that user form. I keep getting a 'Type Mismatch' on the SetNewPage=.... line no matter how I change it.
The issue I am having is that the code fails if there is ever a "sheet2" left open. I need it to always target the sheet Data5m.
What seems to happen is the sheet targets the first available sheet. This book only consists of 1 sheet, but generates other sheets later, sometimes extra sheets are left open.
Microsoft Excel Objects - This Workbook code
'The following is for the Userform DataReport code
DataReport.ComboBox1.Clear
Columns("N:N").Select
Range("A2:HX29921").Sort Key1:=Range("N2"), Order1:=xlAscending, Header:= _
xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Data5m.Range("A1").AutoFilter
Call FillCombobox(Data5m.Range("N2", Data5m.Cells(Rows.Count, "N").End(xlUp)), DataReport.ComboBox1)
DataReport.Show
End Sub
Forms - DataReport
Code:
Private Sub ComboBox1_Change() 'was A, now N
DataReport.ComboBox2.Clear
If Data5m.FilterMode = True Then: Data5m.ShowAllData
Data5m.Range("A1").AutoFilter field:=14, Criteria1:="=" & DataReport.ComboBox1.Value
Call FillCombobox(Data5m.Range("X2", Data5m.Cells(Rows.Count, "X").End(xlUp)).SpecialCells(xlCellTypeVisible), DataReport.ComboBox2)
[Code] ..........
When I view a sheet under Page Break Preview, it shows the Page numbers in the centre of the Page. While I am aware that it would not print the page number I was wondering if there is an option to remove/hide the page numbers.
View 3 Replies View RelatedI have a MultiPage User Form, it has 2 tabs within the User Form.
I want to display Tab #1 (the first tab) as the 'visible/active' Tab for the user upon opening the user form. How do I do that?
Usually, I would open a User Form with frmMyForm.Show in a private module, to show the form. But now I have 2 Tabs, and want to select a certain Tab upon opening it?
I have a listbox with 8 columns. Multiselect is enabled, and it must stay this way. As part of my program, after the user presses a command button, I need to use the row indexes of the selected rows in order to copy the selected information into an array which is then placed in a different listbox, and then delete the items from the original list. Pseudocode of what I want to do:
[Code] .....
But my understanding is that .ListIndex does not work this way with multiselect listboxes. I've tried searching for a solution for a while, but I cannot find one.
Let's say I have one column of;
1
2
3
4
5
6
7
8
9
What is the most efficient way to change this into '3-columns & multi-rows' like this?:
1 2 3
4 5 6
7 8 9
The actual list is a lot longer and numbers are not in order.
I have multiple rows within a cell separated by Alt+Enter, and would like to combine them as follows:
Desired Result
First
First
Name
Name
First Name
First Name