Multi Page Tab Strip

May 26, 2006

what is the differance between a multi page control and a tab strip control

View 4 Replies


ADVERTISEMENT

Tab Strip Vs. Multi-Page Controls

Jun 19, 2009

What are the differences/advantages to these 2 controls in a User Form?

I have already seen that the tab strip doesn't seem to toggle b/t pages, as a frame I placed remained on both "tabs" (I am wondering what it does if you can't toggle).

View 9 Replies View Related

Change Start Page Of Multi Page UserForm

Jul 23, 2006

Is it possible to Change Start Page Of Multi Page UserForm Based on 8 CommandButtons. on a WorkSheet, for example.

CommandButton1
UserForm1.MultiPage1.Value = 0
CommandButton2
UserForm1.MultiPage1.Value = 1
CommandButton3
UserForm1.MultiPage1.Value = 2
CommandButton4
UserForm1.MultiPage1.Value = 3

Could I use 1 multipage UserForm Instead of 8 UserFoms. Is it better to use 1 multipage UserForm with 8 pages or 8 UserForms. I dont know if this make sense or not?

View 2 Replies View Related

Multi-page Tab Caption

Oct 25, 2009

Can i have the caption of a multi-page tab caption change on the result a given cell?

i.e. in the attached example i would like page 1 to be the result of B2.

View 8 Replies View Related

Multi-Page Userform Controls

Dec 15, 2008

I have a MultiPage userform and I'm adding (4) control buttons - CancelButton, BackButton, ForwardButton and FinishButton. On the first page, those names are fine but when I get to subsequent pages, I get an ambiguous error if I try to name the controls the same. But the code will all be the same. What am I missing? In an example that I have, the user was able to name all the controls with the same name. What setting would control that?

View 5 Replies View Related

SetFocus On Multi Page UserForm

Jun 18, 2006

I've got a userform with multiple pages, and in my userform initialize sub I set the focus to "combobox1" on "page1". When a user is on page2 of the form and clicks my "ClearData" button, which calls the initialize event, I get a run time error 2110 - "Can't move focus... etc" I would like users to have the ability to clear the form and start over no matter what page they are on.

View 8 Replies View Related

UserForm Multi-Page Wizard

Mar 18, 2008

i'm trying to build an app that'll take a user through 5 or 6 steps of a process, with maybe 2-3 substeps in some steps. right now i'm currently using a multipage Userform , but all the tabs make the whole thing look cluttered (even when there's a "Next" button in plain sight). this is especially because i've put each substep as a multipage form under that step's page (multipage forms inside a multipage form). so steps 1-5 would each have their own pages (1-5), then in page 1 you'd have another multipage form (1.a. - 1.c.). is there a way to make it look simpler? i'd like it to look a bit like a Wizard (ie remove all the tabs), but the only way i can think of is to throw a whole heap of controls on one page, and turn them visible/invisible each step of the way.

View 4 Replies View Related

Set Up Multi Page To Mimic Userform Initialize

Aug 2, 2007

I have a userform that has a multi page on it with 4 pages. I notice that there is no way to have the individual pages be set to a click event- or none that I see anyways.
What I am wanting is for a series of events to happen based on what page the user chooses from the four (like a userform initialize type event).

View 4 Replies View Related

Excel 2010 :: Printing Multi-page Document?

Nov 23, 2011

Have very recently been upgraded to Windows 7 with Excel 2010 at work. On printing out a 10 page doucment, (all of which are landscape format), when vewing print preview, the first page is previewed as landsacpe, but subsequent pages are portrait.

If you change format of 2nd page to landscape all subsequent pages switch to landscape.

Have looked at a similar format document created last month and it behaves exactly the same. Whole document landscape but on print preview only first page is...

View 3 Replies View Related

VBA Code For Transferring Selections On A Multi Select List Box To A Page

Jun 12, 2009

Whats the VBA code for transfering selections on a multi select list box to a page.
ex. the list box has selections from 1 to 20 and I want to select 3,4, and 5
then on the page I want it to say 3,4,5

View 9 Replies View Related

Page Break Preview It Shows The Page Numbers In The Centre Of The Page

Jun 9, 2009

When I view a sheet under Page Break Preview, it shows the Page numbers in the centre of the Page. While I am aware that it would not print the page number I was wondering if there is an option to remove/hide the page numbers.

View 3 Replies View Related

Return Row Index Of Selected Items In Multi Column Multi Select Listbox

Jun 30, 2014

I have a listbox with 8 columns. Multiselect is enabled, and it must stay this way. As part of my program, after the user presses a command button, I need to use the row indexes of the selected rows in order to copy the selected information into an array which is then placed in a different listbox, and then delete the items from the original list. Pseudocode of what I want to do:

[Code] .....

But my understanding is that .ListIndex does not work this way with multiselect listboxes. I've tried searching for a solution for a while, but I cannot find one.

View 5 Replies View Related

1 Column Into Multi-columns And Multi-rows

Jul 16, 2013

Let's say I have one column of;

1
2
3
4
5
6
7
8
9

What is the most efficient way to change this into '3-columns & multi-rows' like this?:

1 2 3
4 5 6
7 8 9

The actual list is a lot longer and numbers are not in order.

View 7 Replies View Related

Concatenate Multi-row Cells Into One Multi-row Cell

Aug 21, 2013

I have multiple rows within a cell separated by Alt+Enter, and would like to combine them as follows:

Desired Result

First
First
Name
Name
First Name
First Name

View 2 Replies View Related

Strip Day From Date?

Mar 3, 2014

how to strip the time from a date formated field using "=INT()". At the moment this works fine for me but I wonder if there is a possibility to strip the day form the datefield as well.

View 10 Replies View Related

Strip Out Numbers From A Cell

Jul 9, 2013

I have a range of cells where I need to strip out the numbers using a formula, is this possible?

E.g.
The data is:
110205 Contract Revenues
110215 Job Revenue
110802 Consumables

This would need to be:
Contract Revenues
Job Revenue
Consumables

View 13 Replies View Related

Strip E-mail From Cell

Oct 22, 2007

I have a spreadsheet which has a "User Description" column. In this column, most users have data that looks similar to this:

APPLICATION - john.smith@mycompany.com
APPWEB - jane-doe@somecompany.com
APPWEB - john_doe@othercompany.com
APPLICATION - TP - paul@acompany.com
APP/APPWeb/DEV - paulsm@thecompany.com

There are also cells in this column which literally have a sentence long description, but those are not my focus. What I need to do is find a way to strip out the e-mail address found in the examples above and copy them into a new cell (the same row for the corresponding user). I don't know where to begin for this.

View 9 Replies View Related

VBA Code To Strip Out Numbers

Jun 28, 2009

Excel 2003

I have two columns of Data:

Column A Origin
Column B Destination

Each column contains:

KANSAS CITY MO 25300 RICHMOND CA 11300

I would like to strip out the 5-digit code

My worksheet is named "data"

View 9 Replies View Related

How To Strip Out Names From Cell And Flip Around First Name Last Name

Jul 25, 2014

How can I strip out a name from a cell, see example below, I would need to remove the number and flip the name.

example:
Column A = Column B results
Blow/Joe 123456 = Joe Blow
Johnson/Mike 898930 = Mike Johnson
Mama/Joe 293810 = Joe Mama
Smith/John 389301 = John Smith

View 14 Replies View Related

Macro To Strip Characters After Space?

Jan 13, 2014

I've a column of data as below:

ROACH (#21)
SHARK (#11)
SHARK (#13)
UNICORN (#26)
ROACH (#20)
TRIGGER (#09)
UNICORN (#06)
UNICORN (#09)
UNICORN (#11)
VIMBA (#03)
VIMBA (#04)
TRIGGER (#06)
ROACH (#07)
ROACH (#08)
ROACH (#10), UNICORN (#24)

What I need to do it to strip off all the characters after the first space.

I assume I can use FIND and then LEFT, but how to I put this into a Macro?

View 4 Replies View Related

Strip Identifiers To Sort Data

May 16, 2006

I have a problem with a spreadsheet my colleague at work has designed. He has entered all the names into it as Mrs A Jones, Mr P Smith, Mrs S Pilkington-Smyth etc. I need to sort these into Alpha order using just the surname. macro or a formula to count backwards until I get a space and then strip this off to allow me to sort it.

View 2 Replies View Related

Strip Leading Apostrophe From Numbers

May 17, 2007

formula to strip apostrophe for lookup formula to recognize text as a number.

View 9 Replies View Related

Strip Chars From Cells & Sort

Feb 19, 2008

I have just done a vba project of striping chars (QOOO1=) from each cell
and then sorting the records on column6/question6

however i have been able to do this and display results in second worksheet(Results2)

I feel there is a better way to do it and display the results on same worksheet

Could anyone take a look at the file and help.

IMPORTANT:Place curse on "Results2" worksheet and run the macro:Pres

Do not run the macro on main sheet all data will be lost and will have to download again.

File:[url]

View 6 Replies View Related

Data Has Year With A Space And Need To Strip Time

Feb 7, 2014

Exported data in PDF and converted to Excel worksheet and some of the data contains a space in the year.

Example: 2/6/2 014 2:49 PM.

I used the =INT(A1) to strip the time off. Worked wonderfully. However when I need to sort by ascending/descending date , it does not put in order due to this extra space. Is there a formula out there that I can use to delete the space? All of the data doesnt appear this way. I am sure it is due to the conversion.

View 9 Replies View Related

Strip Only Leading Numeric From Alphanumeric String In VBA

Jun 20, 2014

I want to strip only the leading set of numbers from a string. Trailing numbers should stay.

Logic rule would be:
1) Find first Alpha character
2) Remove all numbers prior to this position

Code:
Original string Desired string
42114DEP DEP
050114OP2OP2
0514OPOP
050214BKCKSBKCKS
05214CKCK
0502CKSCKS
050214CKS-3CKS-3
050214CKSACKSA
050214OPOP
50214PSCASH1PSCASH1
050214PSCKSPSCKS
0502SALES SALES

View 9 Replies View Related

Strip Excess Spaces Out Of Address Cell

Jan 31, 2008

I need VBA to remove more than 3 blank spaces after the city & replace them with a comma & one blank. For example:

All in one column AB starting with row 7 I have:

Johnson City (13 Blank Spaces) NC 75503 (1 to 3 spaces after state & is OK)
Jacksonville (10 blank spaces) Fl 23854
Henderson (12 blank spaces) NH 28363 (12 blank spaces)
etc

I need all in one column AC starting with row 7:
Johnson City, NC 75503 (,space before state, same space after state ok)
Jacksonville, FL 23854
Henderson, NH 28363
etc

View 9 Replies View Related

Strip Unwanted Characters From Text String

Sep 8, 2009

Is there an Excel function that can strip a specificed unwanted character from a text string to leave all the other characters excluding the unwanted one?

e.g. if the original text strings were (in separate cells within a workbook):

C-2C-9C-9-XA-10A-10-BA-10-XA-8N-7-D

The function would strip the "-" to leave:

C2
C9
C9X
A10
A10B
A10X
A8
N7D ...etc.

View 9 Replies View Related

Find Pairs Of Records And Strip Out Remainder

Apr 27, 2007

I have one hundred rows of data and within that there are some records which are the same and they will always be in pairs - identifiable by a cell with the same ref common to both records. how to strip out the records that are not part of a pair? I would like remove all of the non pairs and move them to another sheet.

View 2 Replies View Related

Put In Error Handling In Case The Format Of The Page Changes Or The Internet Page Is Unavailable

May 18, 2006

I have some code that parses an html table. I want to put in error handling in case the format of the page changes or the internet page is unavailable. I am testing without an internet connection and the run time error is not being branched off to the error handler and is fatally ending the macro. This is true also if I raise an error manually.

Private Sub ParseInjuryPage()
On Error Goto ErrorHandl
Dim strPage As String
Dim webIE As SHDocVw.InternetExplorer
Dim myURL As String
Dim tableBeg As Long
Dim tableEnd As Long
Dim RowBeg As Long
Dim rowEnd As Long
Dim cellBeg As Long
Dim cellEnd As Long
Dim strBeg As Long
Dim strEnd As Long
Dim myCell As Range
Dim rowNum As Integer
With Sheets("INJ")
Set myCell = .Range("A2")
.Range("A:F").Value = vbNullString
rowNum = 2
Set webIE = New SHDocVw.InternetExplorer
myURL = "http://www.sportsline.com/nfl/injuries"
webIE.Navigate myURL
Do Until webIE.ReadyState = READYSTATE_COMPLETE
DoEvents
Loop
strPage = webIE.Document.body.innerhtml...................................

View 6 Replies View Related

Can't Move Page Breaks In Page Break Preview

Mar 26, 2006

I suddenly can't adjust my page breaks in any Excel spreadsheet while in Page Break Preview. Is there some option to turn it on and off?

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved