I have a developed a UserForm to enter data into Excel. I can get the UserForm to enter data in row2 under the headings I have created. I have a Next button on the UserForm, which I want to go to the next row when pressed to enter dta in row3, then row4 etc. Is there anywhere I can find examples of how to do this?
View 9 Replies
I have sheet (say Sheet3) that is in essence a Database. I need to create a Userform to insert a row above the highlighted cell and insert the data on the Userform in that row.
Userform would have 3 textboxes to enter data, a submit button and a cancel button. (the 3 boxes titled Part, Price,Vendor)
In the Worksheet the 3 Columns are
A C E
Part Price Vendor
I have created a spreadsheet which uses a User Form to input data and then give it a reference number (this bit works fine).
I am now trying to use a User Form to enter a reference number which will then be searched across my spreadsheet, I then want all the entered data relevant to that reference number to appear in a User Form along with additional fields for entry of additional info.
In this User Form, the original data could be modified but more importantly, the remaining data added before then being placed into the main spreadsheet.
This is a booking in system where the person presents to a receptionist and the initial data is entered. Once that person has been dealt with, the remaining details regarding their visit will need to be inputted, hence this request.
I have started a user form called submit stock. What i am trying to work out is if i can use this form to enter the data to the worksheet using the form to specific columns depending on the first choice.
View 8 Replies View Relatedis it possible to enter data on a spredsheet while a form is opened or must the from be closed first. I thought I was smart to have a form remain open so users could change parameters but at the same time allow them to enter data in uprotected cells.
View 2 Replies View RelatedEnter Data To Multi Sheet Through Userform. How can I enter Data from entryform to multisheet?
View 6 Replies View RelatedI have a userform that numerous people need to fill in. I want to add a login function so that each person has their own login detail. Their will be a command button called login. Until they login in they cannot enter any data.
View 4 Replies View RelatedI need to add something to the code below to have my first row of data entered into cell "Q8". As it is now the data is starting on row Q9 instead of Q8, but the rest of it is filling in correctly.
[Code] .....
MONDAY
xxxxxxxxxxxxxTeam1 | Team2 | Team3 | Team4 etc.
Hours State1
-
Hours State2
-
Hours State3
-
etc.
TUESDAY
xxxxxxxxxxxxxTeam1 | Team2 | Team3 | Team4 etc.
Hours State1
-
Hours State2
-
Hours State3
-
etc.
WEDNESDAY
xxxxxxxxxxxxxTeam1 | Team2 | Team3 | Team4 etc.
Hours State1
-
Hours State2
-
Hours State3
-
etc.
Each team leader would then input hours in each state each day on their column. Make sense? Easy Peasy...
My question........... is it posible to have a userform where a TL would select their name (Column) and Day (Monday=Row 3, Tuesday=Row23 etc) from a dropdown and then input figures in txt boxes to submit them in the correct location?
I really know nothing about vba so here goes. I would like to enter data in a row with 4 cells of info. then hit enter and return to the first cell and move the row down. all four cells must have data entered. and all four must move down. i tried some code as below i found and i modified but it did not work as expected. this moved the row down when returning the cursor to A2. It also should not copy the data style of the top row.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Column <> 1 Then Exit Sub
Application.EnableEvents = False
[Code].....
I have this series of userform modules that error check the user's input of a date value.
Code:
Private Sub txtDate_Enter()
txtdate.SelStart = 0
txtdate.SelLength = Len(txtdate.Value)
[Code]....
Everything works fine, but I'm looking to improve it's efficiency. Most people will by habit press [ENTER] after inputting the date in the textbox txtdate control. As it is now, for the code to execute after the value is entered is to push the {SUBMIT} button.
What would I need to do to allow hitting [ENTER] to do the same as clicking submit?
I have a userform made with excel. I need to tab to the next field (in the tab order) when I press enter instead of having to press the tab key. Is there an easy way to do this. Im not that savvy with VBA.
View 1 Replies View RelatedI have an excel sheet with a couple of rows/columns of data in it (i've attached the sheet to my post (zipped in two parts)). Since I'm not familiar with VB. I want to simplify data entering procedure and I need a simple Userform for that purpose. That userform should enable me to enter data in the first row which has an empty cell in Column C. I have found a relatively decent userform on the internet and incorporated it into my sheet, but it's not working particularly well (it allows me to enter data only in one row, not in two or three). If I hadn't been clear enough, try to enter data in my sheet and you'll see what's the problem
Private Sub cmdAdd_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("PartsData")
iRow = ws.Cells(Rows.Count, 3) _
.End(xlUp).Offset(1, 0).Row
If Trim(Me.txtPart.Value) = "" Then
Me.txtPart.SetFocus
MsgBox "Please enter a part number"
Exit Sub
End If
ws.Cells(iRow, 1).Value = Me.txtPart.Value
ws.Cells(iRow, 3).Value = Me.txtLoc.Value
ws.Cells(iRow, 4).Value = Me.txtdate.Value
ws.Cells(iRow, 5).Value = Me.txtQty.Value
Me.txtPart.Value = ""
Me.txtLoc.Value = ""
Me.txtdate.Value = ""
Me.txtQty.Value = ""
Me.txtPart.SetFocus
PS you'll notice that I have a Command button/Macro that inserts new rows in the middle of the already entered data. It perfectly suits my needs since it also copies the formula from the Column L to the new rows. That code needs no repairs.
I am having trouble using User Forms.
I am trying to enter data using User Forms to apply to a specific cell.
For example the user enters text or a number value into a text box and clicks a command button to submit that information into a specific cell. In this case D43.
I have a User Form that is used to collect data. CommandButton1 loads the User Form data into the worksheet and CommandButton2 clears all data from the Form in preparation for entering the next record. Immediately after a user first opens the Form, the very first time CommandButton1 is clicked, the Enter Key stops working. At this point data can be typed into any TextBox on the Form, but when the Enter Key is pressed the cursor remains in the TextBox. (The Enter Key will not move the focus to the next Textbox in the Tab Order. Also, if I alter the code to set the focus on a CommandButton as the active control instead of a TextBox, pressing Enter on the active CommandButton does not execute the CommandButton's macro... the same behavior as a TextBox; nothing at all happens when the Enter Key is pressed even though the CommandButton has focus).
At the point when the Enter Key stops functioning, if the user presses 'Alt-Tab' to leave the Form and then immediately uses 'Alt-Tab' to return back into the Form the Enter Key suddenly works again and continues to work correctly from that point on even after CommandButton1 is clicked. Again, the Enter Key stops working ONLY the first time CommandButton1 is run immediately following initially opening the workbook and Alt-Tabing into the Form immediately corrects it. I saw one other post in this forum with this same problem in 2003, but unfortunately it did not get answered.
I have a userform that contains a number of controls. When I press the enter / return key, I would like this to have the same effect as hitting the 'OK' button i.e. run some code. At the moment, hitting enter sets the focus on the next control in the tab order.
View 5 Replies View RelatedI have a userform with a textbox in it. Once you type what you want in the textbox, you click on one of two buttons - either Accept or Cancel. It would be much neater if the userform would close when the user hits the carriage return in the textbox. Anyone know how this can be achieved? Kjartan Auto Merged Post Until 24 Hrs Passes;Doh never mind folks, I figured it out...
Private Sub Userform1Textbox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Userform1.Exit
End Sub
Say a user inputs information into the user form, when they click enter, it enters all the data on the next available line in a workbook.
Is is possible for the user to click a cell on a previously entered row, and have the userform populate with the existing information?
example.
say the user has to fill out 3 separate areas. 1, 2, 3. However the user only has data for 1 and 2. They go ahead and enter the infromation for 1 and 2 and click submit to transfer to sheet. Now later he gets information for area 3, can the row the information that he previously entered, lets say column 1, row 1, and it reopens the userform with the information for 1 and 2 prefilled from what he entered previously?
i would like to create a userform with a textbox to enter a product code , a command button to run VBA and a big text box to show output of VBA from Textbox 1 which i will connect to DB and pull back information relevant to that product code , is this possible i can create the userform no problem and already have code to pull back from DB into Excel ,
View 9 Replies View RelatedI have this userform:
DATE : [TextBox1] WITHDRAWAL: [TextBox2]
[Commandbutton1]
In my sheet I have a list of all the days in a year in the cell range of AJ12:AJ376.
Basically I want to find the date in Textbox1 within the range of AJ12:AJ376 and enter the value of Textbox2 in a adjacent cell. The adjacent cell would be in column AT. This would be achieved hopefully via a code using the commandbutton.
I have developed a Userform button in Excel 2010 using the developer icons, which when clicked on with my mouse it runs my super dooper macro. It works great!
But one thing I want to have happen is to have the choice of using the Enter key to start the macro or use the left mouse button
For example, I place data in (say) cell A1 and the userform button is in cell A2. When I place the data in A1 and press the Enter key, the cursor moves down to A2, but doesn't highlight the user button. When I press the Enter key again, the cursor moves to cell A3.
What I want is when I fill in the data in A1 and press the Enter key, the cursor moves to cell A2 and selects the button, so that when I press the Enter key again, it activates the macro.
I have a workbook that I'm using to tracking staffing patterns within a mental health agency. When the workbook opens the user is asked to pick a date range and an office location. I've placed code into the userform that pre-fills the "start date" with today's date and the "end date" 7 days from today's date. I would like the user to be able to enter a unique date range should they wish but I have yet to figure out the coding to accomplish my goal.
[Code] .....
Attached File : Staffing Report 1.90.xlsm
I wondering if it's possible to create a code to have a popup where the user can enter a date in mm/dd/yyyy format and then all rows containing that date will be deleted.
View 9 Replies View RelatedThis formula must be confirmed with CTRL+SHIFT+ENTER not just ENTER. You will see { } brackets appear.
View 3 Replies View RelatedI have a spreadsheet that runs a macro resulting in a different number of rows everytime the macro is run. Columns H, I & J are the only columns with currency in them. I would like a macro to find the bottom-most row of currency data in these columns and insert the Auto-sum formula in the row directly below each of these 3 columns. Then bold this row and increase the font by 2 points (or 12).
View 13 Replies View RelatedI have created a userform and a command button to bring up the user form but when I click on the command button and the user form pops up I am not able to enter any data, the entire page freezes
This is the code
Private Sub CommandButtoncancel_Click()
unloadme
End Sub
Private Sub CommandButtonOK_Click()
With Workbooks("RETS results version 2.xlsm")
[Code] ......
I've been using Excel for years and had very few issues. However, I recently went into a spreadsheet to update it and was unable to select and enter data into an individual cell. When I click on a cell and try to enter #s nothing happens (my num lock is on). Then when I try to click into another cell it just highlights that cell, along with any other that I move my cursor over. Once I click on one cell I can't stop the highlighting from happening. I can't even click on anything in the toolbar.
View 14 Replies View RelatedAfter recording a macro that goes to last figure in data, how do I edit this to prompt for a new data value and enter it into 1st empty cell at end of data?
View 8 Replies View RelatedI have 13 columns - 12 representing each month of the year and then a total. I start in F15 with Jan and end in R15 with the total - this is the heading row.
Below that I have my numbers for each month. Here's what I need to do: Anytime the total changes (by updating the monthly numbers), I need the day's date to be automatically entered into F14. This way I know the last time the data was changed.
After recording a macro that goes to last figure in data, how do I edit this to prompt for a new data value and enter it into 1st empty cell at end of data?
View 6 Replies View Related
